检索结果-南通市图书馆

Multi-Pollutant Formation and Control in Pressurized Oxy-Combustion:SO_(x),NO_(x),Particulate Matter,and Mercury

engineering 2024年第8期39卷 127-153页

作者： Gaofeng Dai Jiaye Zhang Zia ur Rahman Yufeng Zhang Yili Zhang Milan Vujanović Hrvoje Mikulčić Nebojsa Manic Aneta Magdziarz Houzhang Tan Richard L.Axelbaum Xuebin Wang MOE Key Laboratory of Thermo-Fluid Science and engineering Xi’an Jiaotong UniversityXi’an 710049China School of Ecology and Environment Hainan UniversityHaikou 570228China faculty of mechanical engineering&Naval Architecture University of ZagrebZagreb 10000Croatia faculty of mechanical engineering University of MariborMaribor 2000Slovenia faculty of mechanical engineering University of BelgradeBelgrade 11120Serbia AGH university of Krakow Krakow 30059Poland Consortium for Clean Coal Utilization Department of EnergyEnvironmental&Chemical EngineeringWashington University in St.LouisSt.LouisMO 63130USA

Oxy-combustion is a promising carbon-capture technology,but atmospheric-pressure oxy-combustion has a relatively low net efficiency,limiting its application in power *** pressurized oxycombustion(POC),the boiler,air separation unit,flue gas recirculation unit,and CO_(2)purification and compression unit are all operated at elevated pressure;this makes the process more efficient,with many advantages over atmospheric pressure,such as low NO_(x)emissions,a smaller boiler size,and *** is also more promising for industrial application and has attracted widespread research interest in recent *** can produce high-pressure CO_(2)with a purity of approximately 95%,which can be used directly for enhanced oil recovery or ***,the pollutant emissions must meet the standards for carbon capture,storage,and *** of the high oxygen and moisture concentrations in POC,the formation of acids via the oxidation and solution of SO_(x)and NO_(x)can be increased,causing the corrosion of pipelines and ***,particulate matter(PM)and mercury emissions can harm the environment and human *** main distinction between pressurized and atmospheric-pressure oxy-combustion is the former’s elevated pressure;thus,the effect of this pressure on the pollutants emitted from POC—including SO_(x),NO_(x),PM,and mercury—must be understood,and effective control methodologies must be incorporated to control the formation of these *** paper reviews recent advances in research on SO_(x),NO_(x),PM,and mercury formation and control in POC systems that can aid in pollutant control in such systems.

关键词： Pressurized oxy-combustion Sulfur oxides Nitrogen oxides Particulate matter Mercury Direct contact cooler Carbon capture and sequestration

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Tutorial Review of the Solar Power Curve: Regressions, Model Chains, and Their Hybridization and Probabilistic Extensions

引用

Advances in Atmospheric Sciences 2024年第6期41卷 1023-1067页

作者： Dazhi YANG Xiang’ao XIA Martin János MAYER School of Electrical engineering and Automation Harbin Institute of TechnologyHarbin 150001HeilongjiangChina Key Laboratory for Middle Atmosphere and Global Environment Observation(LAGEO) Institute of Atmospheric PhysicsChinese Academy of SciencesBeijing 100029China department of Energy engineering Faculty of Mechanical EngineeringBudapest University of Technology and EconomicsMűegyetem rkp.3Budapest H-1111Hungary

Owing to the persisting hype in pushing toward global carbon neutrality,the study scope of atmospheric science is rapidly *** numerous trending topics,energy meteorology has been attracting the most attention *** essential skill of solar energy meteorologists is solar power curve modeling,which seeks to map irradiance and auxiliary weather variables to solar power,by statistical and/or physical *** this regard,this tutorial review aims to deliver a complete overview of those fundamental scientific and engineering principles pertaining to the solar power *** power curves can be modeled in two primary ways,one of regression and the other of model *** classes of modeling approaches,alongside their hybridization and probabilistic extensions,which allow accuracy improvement and uncertainty quantification,are scrutinized and contrasted thoroughly in this review.

关键词： review energy meteorology solar power curve model chain solar power prediction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Stable Fuzzy-Based Computational Model and Control for Inductions Motors

引用

工程与科学中的计算机建模(英文) 2024年第1期138卷 793-812页

作者： Yongqiu Liu Shaohui Zhong Nasreen Kausar Chunwei Zhang Ardashir Mohammadzadeh Dragan Pamucar School of mechanical and Electrical engineering Guangdong University of Science&TechnologyDongguan523083China School of Information Hunan Open UniversityChangsha410081China department of Mathematics Faculty of Arts and SciencesYildiz Technical UniversityEsenlerIstanbul34220Turkey Multidisciplinary Center for Infrastructure engineering Shenyang University of TechnologyShenyang110870China faculty of Organizational Sciences University of BelgradeBelgrade11000Serbia College of engineering Yuan Ze UniversityTaoyuan320315TaiwanChina

In this paper,a stable and adaptive sliding mode control(SMC)method for induction motors is *** the parameters of this system has been one of the existing *** solve this challenge,a new self-tuning type-2 fuzzy neural network calculates and updates the control system parameters with a fast *** to the dynamic changes of the system,in addition to the parameters of the SMC,the parameters of the type-2 fuzzy neural network are also updated *** conditions for guaranteeing the convergence and stability of the control system are *** the simulation part,in order to test the proposed method,several uncertain models and load torque have been ***,the results have been compared to the SMC based on the type-1 fuzzy system,the traditional SMC,and the PI *** average RMSE in different scenarios,for type-2 fuzzy SMC,is 0.0311,for type-1 fuzzy SMC is 0.0497,for traditional SMC is 0.0778,and finally for PI controller is 0.0997.

关键词： Sliding mode control self-tuning type-2 fuzzy systems inductions motor parameters uncertainty

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microwave-accelerated direct regeneration of LiCoO_(2)cathodes for Li-ion batteries

引用

Science China Chemistry 2024年第7期67卷 2181-2189页

作者： Xueshan Hu Yun-Chao Yin Chao Li Lihui Zhou Lin Yang Yitian Feng Daxian Zuo Chenhui Ning Das Soham Sheng Dai Longbin Qiu Lin Zeng Haw Jiunn Woo Jiayu Wan Future Battery Research Center Global Institute of Future TechnologyShanghai Jiao Tong UniversityShanghai 200240China department of mechanical and Energy engineering Southern University of Science and TechnologyShenzhen 518055China Centre for Ionics university of Malaya Department of PhysicsFaculty of ScienceUniversity of MalayaKuala Lumpur 50603Malaysia Key Laboratory for Advanced Materials and Feringa Nobel Prize Scientist Joint Research Center School of Chemistry and Molecular EngineeringEast China University of Science and TechnologyShanghai 200237China department of Natural and Applied Sciences Duke Kunshan UniversityKunshan 215316China

Recycling spent lithium-ion batteries is integral to today's low-carbon environmental protection *** concept of direct regeneration,acknowledged for its environmental sustainability,economic viability,and consistent performance of recycled materials,is gaining *** study presents an efficient and nondestructive approach by utilizing an ultrafast microwave technology to directly regenerate spent lithium cobaltate(LCO)cathode *** contrast to conventional furnacebased processes,this method significantly reduces the regeneration *** subjecting the spent LCO mixed with lithium sources to three microwave heating cycles(at approximately 1,350 K),LCO regeneration is achieved,yielding a specific capacity of 140.8 mAh g^(-1)(0.2 C)with a robust cycle *** further environmental and economic benefits,the ultrafast microwave technology holds scientific promise for directly regenerating cathode materials,while establishing competitiveness for industrial applications.

关键词： battery recycling spent lithium cobaltate microwave directly regeneration cathode materials

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design of a Novel Exoskeleton with Passive Magnetic Spring Self-locking and Spine Lateral Balancing

引用

Journal of Bionic engineering 2024年第1期21卷 236-255页

作者： Jhon F.Rodríguez-León Betsy D.M.Chaparro-Rico Daniele Cafolla Francesco Lago Eduardo Castillo-Castañeda Giuseppe Carbone Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada Unidad Querétaro MecatronicaInstituto Politécnico NacionalCerro Blanco 14176090 Colinas del CimatarioQuerétaroMexico department of mechanical Energy and Management EngineeringUniversity of CalabriaVia P.Bucci Cubo 46 C87036 RendeItaly faculty of Science and engineering Department of Computer ScienceSwansea UniversitySwanseaUK CESTER University of Cluj-NapocaCluj-NapocaRomania

This paper proposes a new upper-limb exoskeleton to reduce worker physical *** proposed design is based on a novel PRRRP(P-Prismatic;R-Revolute)kinematic chain with 5 passive Degrees of Freedom(DoF).Utilizing a magnetic spring,the proposed mechanism includes a specially designed locking mechanism that maintains any desired task *** proposed exoskeleton incorporates a balancing mechanism to alleviate discomfort and spinal torsional effects also helping in limb weight *** paper reports specific models and simulations to demonstrate the feasibility and effectiveness of the proposed *** experimental characterization is performed to validate the performance of the mechanism in terms of forces and physical strain during a specific application consisting of ceiling-surface drilling *** obtained results preliminarily validate the engineering feasibility and effectiveness of the proposed exoskeleton in the intended operation task thereby requiring the user to exert significantly less force than when not wearing it.

关键词： Assistive mechanism Exoskeleton Locking mechanism Bionic robot

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical manifold method for thermo-mechanical coupling simulation of fractured rock mass

引用

Journal of Rock Mechanics and Geotechnical engineering 2024年第6期16卷 1977-1992页

作者： Jiawei Liang Defu Tong Fei Tan Xiongwei Yi Junpeng Zou Jiahe Lv faculty of engineering China University of GeosciencesWuhan430074China department of Civil engineering Monash UniversityClaytonVIC3800Australia Badong National Observation and Research Station of Geohazards China University of GeoscienceWuhan430074China

As a calculation method based on the Galerkin variation,the numerical manifold method(NMM)adopts a double covering system,which can easily deal with discontinuous deformation problems and has a high calculation *** at the thermo-mechanical(TM)coupling problem of fractured rock masses,this study uses the NMM to simulate the processes of crack initiation and propagation in a rock mass under the influence of temperature field,deduces related system equations,and proposes a penalty function method to deal with boundary *** examples are employed to confirm the effectiveness and high accuracy of this *** the thermal stress analysis of a thick-walled cylinder(TWC),the simulation of cracking in the TWC under heating and cooling conditions,and the simulation of thermal cracking of the SwedishÄspöPillar Stability Experiment(APSE)rock column,the thermal stress,and TM coupling are *** numerical simulation results are in good agreement with the test data and other numerical results,thus verifying the effectiveness of the NMM in dealing with thermal stress and crack propagation problems of fractured rock masses.

关键词： Heat conduction Fractured rock mass Crack propagation Galerkin variation Numerical manifold method(NMM)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparative Analysis: Trays versus Packed Columns in Pressure-Swing Distillation for the Separation of Tetrahydrofuran, Water and Ethanol Azeotropic Mixture

引用

World Journal of engineering and Technology 2024年第3期12卷 798-819页

作者： Samuel Oluwaseun Ogunrinde Tolulope Daniel Adekoya Thomas A. Orhadahwe department of mechanical engineering Faculty of Engineering Ajayi Crowther University Oyo Nigeria AstraZeneca Boston Massachusetts USA

This paper delves into the comparative study of tray and packed column pressure swing distillation systems, focusing on the separation of a ternary mixture containing ethanol, tetrahydrofuran (THF), and water. The study particularly emphasizes the production of 99.5 w/w% tetrahydrofuran from the downstream product of 1,4-butanediol synthesis via diethyl maleate. Pro/II simulation software is utilized to explore various system configurations, including sieve trays, valve trays, and packed columns. Material and energy balances are performed to ascertain stream compositions and energy demands. The investigation encompasses the effects of column operating pressure on condenser and reboiler temperatures, as well as the implications of utility streams. A rigorous distillation model is employed to compare valve tray, sieve tray, and random packing (utilizing Norton Super Intalox) column designs by varying the number of trays, reflux ratio, and second distillation column pressure. Heat exchangers are integrated into the model, and their areas and utility flow rates are computed and integrated into the economic assessment. Economic analysis, guided by Net Present Value (NPV) calculations over a 20-year span, drives the selection of the most cost-effective design. Results demonstrate that while all designs are energy-efficient, the packed column system emerges as the most economical choice, offering a comprehensive framework for the separation process. Furthermore, optimal design configurations and operating conditions for both tray and packed column systems are outlined, providing valuable insights for industrial applications.

关键词： Azetrope Tetrahydrofuran Ethanol Pressure-Swing Distillation Simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

An intrinsically self-healing and anti-freezing molecular chains induced polyacrylamide-based hydrogel electrolytes for zinc manganese dioxide batteries

引用

Journal of Energy Chemistry 2024年第2期89卷 565-578,I0013页

作者： Haiyang Liao Wenzhao Zhong Chen Li Jieling Han Xiao Sun Xinhui Xia Ting Li Abolhassan Noori Mir F.Mousavi Xin Liu Yongqi Zhang Institute of Fundamental and Frontier Sciences University of Electronic Science and Technology of ChinaChengdu 611731SichuanChina School of mechanical engineering Hunan University of TechnologyZhuzhou 412007HunanChina School of Materials Science and engineering Zhejiang University of TechnologyHangzhou 310014ZhejiangChina department of Chemistry Faculty of Basic SciencesTarbiat Modares UniversityTehran 14117-13116Iran State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200HubeiChina

The anti-freezing strategy of hydrogels and their self-healing structure are often contradictory,it is vital to break through the molecular structure to design and construct hydrogels with intrinsic anti-freezing/self-healing for meeting the rapid development of flexible and wearable devices in diverse service ***,we design a new hydrogel electrolyte(AF/SH-Hydrogel)with intrinsic anti-freezing/self-healing capabilities by introducing ethylene glycol molecules,dynamic chemical bonding(disulfide bond),and supramolecular interaction(multi-hydrogen bond)into the polyacrylamide molecular *** to the exceptional freeze resistance(84%capacity retention at-20℃)and intrinsic self-healing capabilities(95%capacity retention after 5 cutting/self-healing cycles),the obtained AF/SH-Hydrogel makes the zinc||manganese dioxide cell an economically feasible battery for the state-of-the-art *** Zn||AF/SH-Hydrogel||MnO_(2)device offers a near-theoretical specific capacity of 285 m A h g^(-1)at 0.1 A g^(-1)(Coulombic efficiency≈100%),as well as good self-healing capability and mechanical flexibility in an ice *** work provides insight that can be utilized to develop multifunctional hydrogel electrolytes for application in next generation of self-healable and freeze-resistance smart aqueous energy storage devices.

关键词： Flexible aqueous battery Hydrogel electrolyte Anti-freezing Self-healing Dual-dynamic reversible bond

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on the tunnel shape and soil-lining interaction influencing the lining behavior under seismic loading

引用

Earthquake engineering and engineering Vibration 2024年第4期23卷 845-862页

作者： Van Vi Pham Ngoc Anh Do Piotr Osinski Ngoc Thai Do Daniel Dias Sustainable Development in Underground engineering Research Team Hanoi University of Mining and GeologyHanoiVietnam department of Underground and Mining Construction Faculty of Civil EngineeringHanoi University of Mining and GeologyHanoiVietnam department of Geotechnical engineering Institute of Civil EngineeringWarsaw University of Life Sciences-SGGWWarszawaPoland Laboratory 3SR Grenoble Alpes UniversityGrenoble 38400France

The response of tunnels subjected to seismic loading is a complex mechanism and depends not only on the seismic nature but also on tunnel structure and surrounding soil *** individual behavior of circular,rectangular,and sub-rectangular tunnels subjected to seismic loadings has already been studied in the *** the present research,two case scenarios of circular,rectangular tunnels and four sub-rectangular shaped tunnels,with similar cross-section areas,were adopted to perform a comprehensive numerical *** purpose of the study was to determine the mechanical behavior of tunnels of different shapes,depending upon seismic *** were performed by considering the influence of soil-lining interaction,soil parameters,and lining thickness,as well as lining *** were performed for no-slip and full-slip *** results indicate that the tunnel shape design is of great importance when regarding the mechanical behavior of the surrounding *** concerns no-slip as well as full-slip soil-lining interaction,especially when the lining is subjected to seismic ***,it is shown that changes in incremental bending moments for circular,rectangular and sub-rectangular tunnels that depend upon the soil-lining interaction conditions differ significantly.

关键词： tunnel shape soil-lining interaction seismic loading internal forces numerical analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

裂纹加筋和缺口加筋对钢加筋板极限强度的影响

引用

哈尔滨工程大学学报（英文版） 2024年第2期23卷 460-469页

作者： Musa Bahmani Fattaneh Morshedsolouk Mohammad Reza Khedmati Babol Noshirvani university of Technology Mechanical Engineering FacultyBabolIran Amirkabir university of Technology Department of Maritime EngineeringTehranIran

This paper numerically evaluates the effect of the crack position on the ultimate strength of stiffened *** such as notches and cracks in aged marine stiffened panels can reduce their ultimate *** investigate the effect of crack length and position,a series of nonlinear finite element analyses were carried out and two cases were considered,i.e.,case 1 with thin stiffeners and case 2 with thick *** both cases,the stiffeners have the same cross-section *** have a basis for comparison,the intact panels were modeled as *** cracks and notches were in the longitudinal and transverse direction and were assumed to be in the middle part of the *** cracks and notches were assumed to be through the thickness and there is neither crack propagation nor contact between crack *** on the numerical results,longitudinal cracks affect the behavior of the stiffened panels in the postbuckling *** the stiffeners are thinner,they buckle first and provide no reserved strength after plate ***,cracks in the stiffeners do not affect the ultimate strength in the case of the thinner ***,when stiffeners are thicker,they affect the postbuckling behavior *** that case,cracks in the stiffeners affect the buckling and failure modes of the stiffened *** effect of notch was also *** contrast to the longitudinal crack in stiffeners,a notch in the stiffeners reduces the ultimate strength of the stiffened panel for both slender and thick stiffeners.

关键词： Stiffened panels Crack Notch Ultimate strength Buckling Nonlinear finite element method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：