检索结果-南通市图书馆

Frontiers of Environmental Science & engineering 2024年第3期18卷 143-159页

作者： Junge Xu Dong Wang Die Hu Ziwei Zhang Junhong Chen Yingmu Wang Yifeng Zhang College of Civil engineering Fuzhou UniversityFuzhou 350116China China Nuclear Power engineering Co. Ltd.Shenzhen 518120China department of Environmental&Resource engineering Technical University of DenmarkLyngby DK-2800Denmark

Iron-based catalysts have been widely used to treat refractory organic pollutants in *** this paper,magnetic Co-γ-Fe_(2)O_(3)was synthesized by a facile tartaric acid-assisted hydrothermal method,and Co-γ-Fe_(2)O_(3)/MoS_(2) nanocomposite catalyst was obtained via in situ growth of MoS_(2) nanosheets on Co-γ-Fe_(2)O_(3)*** nanocomposite catalysts were used to decompose bisphenol A(BPA)by activating peroxymonosulfate(PMS).It was shown that only 0.15 g/L catalyst and 0.5 mmol/L PMS degraded 10 mg/L of BPA(99.3%within 10 min)in the pH range of 3–*** was activated due to redox cycling among the pairs Co(III)/Co(II),Fe(III)/Fe(II),and Mo(VI)/Mo(IV).Quenching experiments and electron paramagnetic resonance spectroscopy demonstrated that both radical and non-radical pathways were involved in BPA degradation,in which active radical sulfate radical and non-radical singlet oxygen were the main reactive oxygen *** intermediates were identified by liquid chromatography-coupled mass spectrometry,and three possible BPA degradation pathways were *** toxicity of several degradation intermediates was lower,and Co-γ-Fe_(2)O_(3)/MoS_(2) exhibited excellent reusability and could be magnetically recovered.

关键词： Magnetic Co-γ-Fe_(2)O_(3) /MoS_(2) Hydrothermal method Bisphenol A Degradation pathways Toxicity analysis

Research advances in enhanced coal seam gas extraction by controllable shock wave fracturing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第3期11卷 1-31页

作者： Chaojun Fan Hao Sun Sheng Li Lei Yang Bin Xiao Zhenhua Yang Mingkun Luo Xiaofeng Jiang Lijun Zhou College of Mining Liaoning Technical UniversityFuxin123000China College of Safety Science and engineering Liaoning Technical UniversityFuxin123000China Energy Business department Shanxi Lu’an Chemical GroupChangzhi046200China

With the continuous increase of mining in depth,the gas extraction faces the challenges of low permeability,great ground stress,high temperature and large gas pressure in coal *** controllable shock wave(CSW),as a new method for enhancing permeability of coal seam to improve gas extraction,features in the advantages of high efficiency,eco-friendly,and low *** order to better utilize the CSW into gas extraction in coal mine,the mechanism and feasibility of CSW enhanced extraction need to be *** this paper,the basic principles,the experimental tests,the mathematical models,and the on-site tests of CSW fracturing coal seams are reviewed,thereby its future research directions are *** on the different media between electrodes,the CSW can be divided into three categories:hydraulic effect,wire explosion and excitation of energetic materials by detonating *** the process of propagation and attenuation of the high-energy shock wave in coal,the shock wave and bubble pulsation work together to produce an enhanced permeability effect on the coal *** stronger the strength of the CSW is,the more cracks created in the coal is,and the greater the length,width and area of the cracks *** repeated shock on the coal seam is conducive to the formation of complex network fracture system as well as the reduction of coal seam strength,but excessive shock frequency will also damage the coal structure,resulting in the limited effect of the enhanced gas *** the influence of ground stress,the crack propagation in coal seam will be *** difference of horizontal principal stress has a significant impact on the shape,propagation direction and connectivity of the CSW induced *** permeability enhancement effect of CSW is affected by the breakage degree of coal *** shock wave is absorbed by the broken coal,which may hinder the propagation of CSW,resulting in a poor effect of permeability *** arranging two a

关键词： Controllable shock wave Permeability enhancement Gas extraction Basic principle Experimental test Mathematical models On-site test

Finite element analysis and experimental validation of polymer-metal contacts in block-on-ring configuration

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第3期12卷 554-568页

作者： K.Y.Eayal AWWAD Khosro FALLAHNEZHAD B.F.YOUSIF Ahmad MOSTAFA Omar ALAJARMEH A.SHALWAN Xuesen ZENG Mechanical engineering department Faculty of EngineeringTafila Technical UniversityTafila 66110Jordan Medical Device Research Institute College of Science and EngineeringFlinders UniversitySouth Australia 5042Australia Centre for Future Materials University of Southern QueenslandToowoomba 4350Australia department of Manufacturing engineering Technology Public Authority for Applied Education and TrainingKuwait 13092Kuwait

The wear profile analysis,obtained by different tribometers,is essential to characterise the wear ***,most of the available methods did not take the stress distribution over the wear profile in consideration,which causes inaccurate *** this study,the wear profile of polymer–metal contact,obtained by block-on-ring configuration under dry sliding conditions,was analysed using finite element modelling(FEM)and experimental ***’s wear equation was integrated into a developed FORTRAN-UMESHMOTION code linked with Abaqus software.A varying wear coefficient(k)values covering both running-in and steady state regions,and a range of applied loads involving both mild and severe wear regions were measured and implemented in the *** FEM was in good agreement with the *** model reproduced the stress distribution profiles under variable testing conditions,while their values were affected by the sliding direction and maximum wear depth(hmax).The largest area of the wear profile,exposed to the average contact stresses,is defined as the normal *** the critical zones were characterized by high stress concentrations reaching up to 10 times of that at the normal *** wear profile was mapped to identify the critical zone where the stress concentration is the key point in this *** surface features were examined in different regions using scanning electron microscope(SEM).Ultimately,SEM analysis showed severer damage features in the critical zone than that in the normal zone as proven by ***,the literature data presented and considered the wear features the same at any point of the wear *** this study,the normal zone was determined at a stress value of about 0.5 MPa,whereas the critical zone was at about 5.5 *** wear behaviour of these two zones showed totally different features from one another.

关键词： polymer-to-metal contact block-on-ring wear profile wear model

Early Detection of Colletotrichum Kahawae Disease in Coffee Cherry Based on Computer Vision Techniques

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第4期139卷 759-782页

作者： Raveena Selvanarayanan Surendran Rajendran Youseef Alotaibi department of Computer Science and engineering Saveetha School of EngineeringSaveetha Institute of Medical and Technical ScienceChennai602105India department of Computer Science College of Computer and Information SystemsUmm Al-Qura UniversityMakkah21955Saudi Arabia

Colletotrichum kahawae(Coffee Berry Disease)spreads through spores that can be carried by wind,rain,and insects affecting coffee plantations,and causes 80%yield losses and poor-quality coffee *** deadly disease is hard to control because wind,rain,and insects carry *** researchers utilized a deep learning system to identify CBD in coffee cherries at three growth stages and classify photographs of infected and uninfected cherries with 93%accuracy using a random forest *** the dataset is too small and noisy,the algorithm may not learn data patterns and generate accurate *** overcome the existing challenge,early detection of Colletotrichum Kahawae disease in coffee cherries requires automated processes,prompt recognition,and accurate *** proposed methodology selects CBD image datasets through four different stages for training and *** to train a model on datasets of coffee berries,with each image labeled as healthy or *** themodel is trained,SHAP algorithmto figure out which features were essential formaking predictions with the proposed *** of these characteristics were the cherry’s colour,whether it had spots or other damage,and how big the Lesions *** inception is important for classification to virtualize the relationship between the colour of the berry is correlated with the presence of *** evaluate themodel’s performance andmitigate excess fitting,a 10-fold cross-validation approach is *** involves partitioning the dataset into ten subsets,training the model on each subset,and evaluating its *** comparison to other contemporary methodologies,the model put forth achieved an accuracy of 98.56%.

关键词： Computer vision coffee berry disease colletotrichum kahawae XG boost shapley additive explanations

Assessing the energy saving potential of using adaptive setpoint temperatures:The case study of a regional adaptive comfort model for Brazil in both the present and the future

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第3期17卷 459-482页

作者： Daniel Sánchez-García David Bienvenido-Huertas Carlos Rubio-Bellido Ricardo Forgiarini Rupp department of Electrical engineering University Carlos III of MadridMadridSpain department of Building Simulation ZEROCEM SLSevilleSpain department of Building Constructions University of GranadaGranadaSpain department of Building Constructions II University of SevilleSevilleSpain Section of Design for Sustainability Department of Civil and Mechanical EngineeringTechnical University of DenmarkKgs.LyngbyDenmark

It has been found in recent years that using setpoint temperatures based on adaptive thermal comfort models is a successful method of energy *** studies using adaptive setpoint temperatures incorporate international models from ASHRAE Standard 55 and *** study,however,has instead considered a regional Brazilian adaptive comfort *** study investigates the energy demand arising from the use of a local Brazilian comfort model in order to assess the energy implications from the use of the worldwide ASHRAE Standard 55 adaptive model and various fixed setpoint *** of Brazil’s climate zones,full air-conditioning,mixed-mode building operating modes,present-day climate change scenarios,and future scenarios—specifically Representative Concentration Pathways(RCP)2.6,4.5,and 8.5 for the years 2050 and 2100—have all been taken into account in building energy *** use of adaptive setpoint temperatures based on the Brazilian local model considering mixed-mode has been found to significantly reduce energy consumption when compared to static setpoint temperatures(average energy-saving values ranging from 52%to 58%)and the ASHRAE 55 adaptive model(average values ranging from 15%to 21%).Considering climate change and the mixed-mode Brazilian model,the overall energy demand for the three groups of climatic zones(annual average outdoor temperatures≤21℃,>21 and≤25℃and>25℃)ranged between 2%decrease and 5%increase,4%and 27%increase,and 13%and 45%increase,*** is concluded as a consequence that setting setpoint temperatures based on the Brazilian local adaptive comfort model is a very efficient energy-saving method.

关键词： adaptive thermal comfort building energy simulation energy efficiency climate change adaptive setpoint temperatures local comfort mode

A hybrid machine-learning model for solar irradiance forecasting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Clean Energy 2024年第1期8卷 100-110页

作者： Ameera M.Almarzooqi Maher Maalouf Tarek H.M.El-Fouly Vasileios E.Katzourakis Mohamed S.El Moursi Constantinos V.Chrysikopoulos department of Industrial and Systems engineering Khalifa UniversityAbu DhabiPO Box 127788UAE Electrical engineering and Computer Science department Khalifa University Abu DhabiUAE department of Civil Infrastructure and Environmental engineering Khalifa UniversityAbu DhabiPO Box 127788UAE School of Chemical and Environmental engineering Technical University of CreteChaniaGreece

Nowcasting and forecasting solar irradiance are vital for the optimal prediction of grid-connected solar photovoltaic(PV)power *** plants face operational challenges and scheduling dispatch difficulties due to the fluctuating nature of their power *** the generation capacity within the electric grid increases,accurately predicting this output becomes increasingly essential,especially given the random and non-linear characteristics of solar irradiance under variable weather *** study presents a novel prediction method for solar irradiance,which is directly in correlation with PV power output,targeting both short-term and medium-term forecast *** proposed hybrid framework employs a fast trainable statistical learning technique based on the truncated-regularized kernel ridge regression *** proposed method excels in forecasting solar irradiance,especially during highly intermittent weather periods.A key strength of our model is the incorporation of multiple historical weather parameters as inputs to generate accurate predictions of future solar irradiance values in its scalable *** evaluated the performance of our model using data sets from both cloudy and sunny days in Seattle and Medford,USA and compared it against three forecasting models:persistence,modified 24-hour persistence and least *** on three widely accepted statistical performance metrics(root mean squared error,mean absolute error and coefficient of determination),our hybrid model demonstrated superior predictive accuracy in varying weather conditions and forecast horizons.

关键词： solar power generation kernel ridge regression hybrid model forecasting

Nonlocal isogeometric analysis for bidirectional functionally graded porous curved microbeams with arbitrary boundary conditions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Sinica 2024年第8期40卷 194-218页

作者： Thu-Huong Nguyen Thi Van Ke Tran Van-Minh Phung Van Hai Trinh Quoc Hoa Pham Faculty of Mechanical engineering Hanoi University of IndustryHanoi100000Vietnam Faculty of Mechanical engineering Le Quy Don Technical UniversityHanoi100000Vietnam Institute of Vehicle and Energy engineering Le Quy Don Technical UniversityHanoi100000Vietnam Faculty of engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh City700000Vietnam

This research aims to analyze the static bending and free vibration behaviors of bidirectional functionally graded porous(BFGP)curved microbeams with elastic boundary conditions resting on a Pasternak’s elastic foundation in a hygro-thermal *** analysis based on non-uniform rational B-splines,first-order shear deformation theory,nonlocal elasticity theory combined with the modified strain gradient theories,modified Timoshenko beam theory are formulated to depict bending and shear deformations of BFGP curved ***,because using the modified Timoshenko beam theory,this study removes the requirement for a shear correction factor and describes shear stress by zero at the upper and lower cross-sectional sites of the BFGP curved *** from traditional boundary conditions,where the beginning and end positions of a curved beam are connected by an elastic system of straight and torsion *** allows for greater flexibility in controlling the stiffness of the springs to obtain arbitrary *** assess the accuracy and convergence of the proposed approach,validation numerical examples were conducted in the various examples.

关键词： Bidirectional functionally graded porous material Elastic boundary condition Isogeometric analysis Curved microbeams Nonlocal elasticity theory Modified strain gradient theory

Random vibration analysis of FGM plates subjected to moving load using a refined stochastic finite element method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第4期34卷 42-56页

作者： Ngoc-Tu Do Trung Thanh Tran Faculty of Mechanical engineering Hanoi University of IndustryHanoiViet Nam Faculty of Mechanical engineering Le Quy Don Technical UniversityHanoiViet Nam

The article introduces a finite element procedure using the bilinear quadrilateral element or four-node rectangular element(namely Q4 element) based on a refined first-order shear deformation theory(rFSDT) and Monte Carlo simulation(MCS), so-called refined stochastic finite element method to investigate the random vibration of functionally graded material(FGM) plates subjected to the moving *** advantage of the proposed method is to use r-FSDT to improve the accuracy of classical FSDT, satisfy the stress-free condition at the plate boundaries, and combine with MCS to analyze the vibration of the FGM plate when the parameter inputs are random quantities following a normal distribution. The obtained results show that the distribution characteristics of the vibration response of the FGM plate depend on the standard deviation of the input parameters and the velocity of the moving ***, the numerical results in this study are expected to contribute to improving the understanding of FGM plates subjected to moving loads with uncertain input parameters.

关键词： FGM Moving load R-FSDT Q4 element Monte Carlo simulation Random vibration

Microstructure and thermal properties of dissimilar M300–CuCr1Zr alloys by multi-material laser-based powder bed fusion

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第1期31卷 118-128页

作者： Xiaoshuang Li Dmitry Sukhomlinov Zaiqing Que Aerosint SA B-4040 HerstalBelgium Aalto University Department of Chemical and Metallurgical EngineeringEspoo 02150Finland VTT technical Research Centre of Finland Espoo 02044Finland

Multi-material laser-based powder bed fusion (PBF-LB) allows manufacturing of parts with 3-dimensional gradient and additional functionality in a single step. This research focuses on the combination of thermally-conductive CuCr1Zr with hard M300 tool *** interface configurations of M300 on CuCr1Zr and CuCr1Zr on M300 were investigated. Ultra-fine grains form at the interface due to the low mutual solubility of Cu and steel. The material mixing zone size is dependent on the configurations and tunable in the range of0.1–0.3 mm by introducing a separate set of parameters for the interface layers. Microcracks and pores mainly occur in the transition *** of these defects, the thermal diffusivity of bimetallic parts with 50vol% of CuCr1Zr significantly increases by 70%–150%compared to pure M300. The thermal diffusivity of CuCr1Zr and the hardness of M300 steel can be enhanced simultaneously by applying the aging heat treatment.

关键词： multi-material additive manufacturing laser-based powder bed fusion thermal diffusivity dissimilar metals copper alloy

Synergistic extraction of rare earth elements and alumina from coal fly ash by potassium pyrosulfate

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第4期42卷 749-758页

作者： Jingjing Zou Yiping Sun Chunbin Guo Daye Chen Yonghong Song Yongfeng Wu Zhaotianhui Li department of Environment Science and engineering Liaoning Technical UniversityFuxin23000China department of Materials Science and engineering Liaoning Technical UniversityFuxin123000 China Technology Research and Development department Chinese Institute of Coal ScienceBeijing100013China Shenhua Zhungeer Energy and Resource Comprehensive Development Co. Ltd.Erdos10300China Liaoning Yingguan High-tech Ceramic Co. Ltd.Jinzhou121213China

Although coal fly ash(CFA)contains a high content of rare earth elements(REEs),the related extraction methods have limitations because of their low efficiencies,high levels of energy consumption,and other *** address these problems,in this study,we examined the coextraction of REEs and Al_(2)O_(3)from two types of Al_(2)O_(3)-rich CFA,pulverized CFA(PCFA)and circulating fluidized bed fly ash(CFBFA)using low-temperature calcination in the presence of K_(2)S_(2)O_(7).The total REEs,heavy REEs(HREEs),and light REEs(LREEs)extraction efficiencies were determined using different K_(2)S_(2)O_(7)/Al_(2)O_(3) molar ratios and calcination temperatures and correlated with the Al_(2)O_(3) extraction efficiency using Pearson correlation coefficient *** REEs are concentrated within CFA particles encapsulated in an aluminosilicate glass phase,and the REEs extraction efficiency is related to the form of Al in *** extraction efficiencies of Al_(2)O_(3) and REEs increase as the K_(2)S_(2)O_(7)/Al_(2)O_(3) molar ratio and calcination temperature increase,and the extraction selectivity of the more industrially valuable HREEs from CFBFA is *** high K_(2)S_(2)O_(7)/Al_(2)O_(3) molar ratios,the extraction of REEs from PCFA is more efficient than that from CFBFA with the regeneration of the highly active Al-O-Si bonds in *** Al_(2)O_(3) extraction efficiencies of PCFA as well as CFBFA correlate strongly with the total REEs,HREEs,and LREEs extraction *** developed extraction technology has the potential to promote CFA valorization and expand REEs resources,thus mitigating the bottlenecks of REEs procurement.

关键词： Rare earths Alumina Coal fly ash Potassium pyrosulfate Calcination Extraction