检索结果-南通市图书馆

Gust response of an elasto-flexible morphing wing using fluid–structure interaction simulations

Chinese Journal of Aeronautics 2024年第2期37卷 45-57页

作者： Jonathan PFLÜGER Christian BREITSAMTER department of Mechanical engineering Technical University of MunichGarching 85748Germany

Small and micro unmanned aircraft are the focus of scientific interest due to their wide range of *** often operate in a highly unstable flight environment where the application of new morphing wing technologies offers the opportunity to improve flight *** investigated concept comprises port and starboard adjustable wings,and an adaptive elastoflexible membrane serves as the lifting *** focus is on the benefits of the deforming membrane during the impact of a one-minus-cosine type *** a low Reynolds number of Re=264000,the morphing wing model is investigated numerically by unsteady fluid-structure interaction ***,the numerical results are validated by experimental data from force and moment,flow field,and deformation ***,with the rigid wing as the baseline,the flexible case is investigated,focusing on the advantages of the elastic *** all configurations studied,the maximum amplitude of the lift coefficient under gust load shows good agreement between the experimental and numerical *** the decay of the gust,they differ more the higher the aspect ratio of the *** considering the flow field,the main differences are due to the separation behavior on the upper side of the *** flow reattaches earlier in the experiments than in the simulations,which explains the higher lift values observed in the *** at one intermediate configuration does the lift amplitude of the rigid configuration exceeds that of the flexible by about 12%,with the elastic membrane resulting in a smaller and more uniform peak load,which is also evident in the wing loading and hence in the root bending moment.

关键词： Membrane wing Morphing wing Flexible wing surface Computational fluid dynam-ics Fluid-structure interaction Unsteady inflow condition Gust response

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A robust optimization method for label noisy datasets based on adaptive threshold: Adaptive-k

引用

Frontiers of Computer Science 2024年第4期18卷 49-60页

作者： Enes DEDEOGLU Himmet Toprak KESGIN Mehmet Fatih AMASYALI department of Computer engineering Yildiz Technical UniversityIstanbul 34220Turkey

The use of all samples in the optimization process does not produce robust results in datasets with label *** the gradients calculated according to the losses of the noisy samples cause the optimization process to go in the wrong *** this paper,we recommend using samples with loss less than a threshold determined during the optimization,instead of using all samples in the *** proposed method,Adaptive-k,aims to exclude label noise samples from the optimization process and make the process *** noisy datasets,we found that using a threshold-based approach,such as Adaptive-k,produces better results than using all samples or a fixed number of low-loss samples in the *** the basis of our theoretical analysis and experimental results,we show that the Adaptive-k method is closest to the performance of the Oracle,in which noisy samples are entirely removed from the ***-k is a simple but effective *** does not require prior knowledge of the noise ratio of the dataset,does not require additional model training,and does not increase training time *** the experiments,we also show that Adaptive-k is compatible with different optimizers such as SGD,SGDM,and *** code for Adaptive-k is available at GitHub.

关键词： robust optimization label noise noisy label deep learning noisy datasets noise ratio estimation robust training

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Investigation of micro-scale shear response of sand–rubber granule mixture in terms of particle shape and grain scale deformability effects

引用

Particuology 2024年第7期90卷 452-469页

作者： Abdulmuttalip Ari Suat Akbulut department of Civil engineering Yildiz Technical UniversityIstanbul34220Turkey

In this study,the effects of particle shape of rigid sand and soft rubber materials on macro-scale shear response were reasoned based on micro-scale *** this purpose,first,the shape properties of three different sand and two different rubber samples were quantified using image processing techniques,and the contact model parameters were calibrated through physical *** direct shear test was simulated in a two-dimensional discrete element software with realistic particle *** soft nature of rubber particles was reflected using body-centered cubic packing with a linear-parallel bond contact *** a result,coordination number,distribution of contact forces(i.e.,strong contact,and fabric anisotropy),and contact sliding were derived by the numerical *** has been observed that the particle shape leads to distinctive micro-scale responses due to the variations in the stiffness of the contacts.

关键词： Particle shape Sand Rubber Shear response Micro-scale response Discrete element method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Direct microwave leaching conditions of rare earth elements in fluorescent wastes

引用

Journal of Rare Earths 2024年第6期42卷 1165-1174,I0007页

作者： A.Bilen B.Birol M.N.Saridede S.S.Kaplan M.S.Sonmez department of Metallurgical and Materials engineering Yildiz Technical UniversityIstanbulTurkey department of Chemical engineering and Materials Science Stevens Institute of TechnologyNew JereyUSA department of Metallurgical and Materials engineering Istanbul Technical UniversityIstanbulTurkey

The luminescent phosphor powder in the fluorescent lamp constitutes 2%of the lamp’s *** can be mentioned that fluorescent wastes are a crucial raw material to produce rare earth *** the present study,microwave leaching process was conducted to dissolve rare earth elements yttrium(Y),europium(Eu),and remaining rare earth elements(REEs)present in the phosphor powder of the fluorescent *** the yields were *** the microwave leaching process,the effects of the temperature(80-160℃),acid type(hydrochloric acid(HCl),nitric acid(HNO_(3)),sulphuric acid(H_(2)SO_(4))),acid concentration(0.5-6 mol/L),solid to liquid ratio(0.1:10-0.5:10)and reaction time(5-90 min)parameters on leaching efficiencies of varying rare earth elements and calcium were *** highest yield was obtained in the direct microwave leaching of fluorescent waste with the experimental conditions of 6 mol/L HCl,160℃,0.1:10 solid-to-liquid ratio(S:L),and 90 *** energy calculations were made,and kinetic models of the reactions were obtained,and it is observed that Y and Eu dissolution is diffusion-controlled,on the other hand,lanthanum(La),cerium(Ce),and terbium(Tb)were examined to be chemical reaction ***,calcium(Ca)and gadolinium(Gd)seem coherent with the mixed ***,mathematical models of all experimental studies are created with the response surface Box-Behnken method and the correlation coefficients of all the models are over 90%.

关键词： Rare earth elements(REEs) Direct microwave leaching Fluorescent waste Kinetic models Response surface method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： Gürel Cam Ali Günen Iskenderun technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Examining the Use of Scott’s Formula and Link Expiration Time Metric for Vehicular Clustering

引用

Computer Modeling in engineering & Sciences 2024年第3期138卷 2421-2444页

作者： Fady Samann Shavan Askar department of Energy engineering Technical College of EngineeringDuhok Polytechnic UniversityDuhok42001Iraq department of Information System engineering Technical College of EngineeringErbil Polytechnic UniversityErbil44001Iraq

Implementing machine learning algorithms in the non-conducive environment of the vehicular network requires some adaptations due to the high computational complexity of these algorithms.K-clustering algorithms are simplistic,with fast performance and relative ***,their implementation depends on the initial selection of clusters number(K),the initial clusters’centers,and the clustering *** paper investigated using Scott’s histogram formula to estimate the K number and the Link Expiration Time(LET)as a clustering *** traffic flows were considered for three maps,namely Highway,Traffic Light junction,and Roundabout junction,to study the effect of road layout on estimating the K number.A fast version of the PAM algorithm was used for clustering with a modification to reduce time *** Affinity propagation algorithm sets the baseline for the estimated K number,and the Medoid Silhouette method is used to quantify the ***++,Veins,and SUMO were used to simulate the traffic,while the related algorithms were implemented in *** Scott’s formula estimation of the K number only matched the baseline when the road layout was ***,the clustering algorithm required one iteration on average to converge when used with LET.

关键词： Clustering vehicular network Scott’s formula FastPAM

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Latest Carboniferous-Early Permian Rifting of the Northern Gondwanan Margin and the Opening of the Northern Neotethys: New Evidence from the Carboniferous and Permian Foraminiferal Assemblages from the Beyşehir-Hoyran Nappes, Central Taurides(Southern Turkey)

引用

Journal of Earth Science 2024年第2期35卷 394-415页

作者： Cengiz Okuyucu U.Kagan Tekin Cagri Guzgun Kaan Sayit department of Geological engineering Konya Technical UniversityKonya42250Turkey department of Geological engineering Hacettepe UniversityAnkara06800Turkey department of Geological engineering Middle East Technical UniversityAnkara06800Turkey

The Beyşehir-Hoyran Nappes,one of the tectonostratigraphic units of the Taurides,are thought to be originated from the Izmir-Ankara Ocean(northern branch of Neotethys).In this study,Late Paleozoic rock units from the blocks of Beyşehir-Hoyran Nappes were studied in detail using foraminiferal assemblages in two different locations from the southwest of Karaman City(southern Turkey).In both places,blocks/slices and pebbles of various origins are embedded within a highly sheared matrix of Late Cretaceous Age,and the whole unit can be regarded as a sedimentary mé*** ages of the blocks from the southwest of Karaman City range from the Late Serpukhovian(Late Mississippian)to Late Capitanian(Middle Permian)with some depositional breaks(e.g.,Bashkirian,Kasimovian).Combined with the previous data from the Mersin Mélange,which also include the remnants of the Beyşehir-Hoyran Nappes,our new findings suggest that a shallowing-upward sequence,characterized by a shallow water environment with foraminifera-bearing limestones,was deposited over the Tournaisian pelagic sequence in the Beyşehir-Hoyran Nappes till the Early Moscovian(Early Middle Pennsylvanian).This shallowing-upward sequence in the Beyşehir-Hoyran Nappes could be related to the Late Paleozoic Glaciation on the Gondwana supercontinent(Glacial Ⅱ),which resulted in a sea-level drop and deposition of platform carbonates during the Viséan–Early Moscovian(Middle Mississippian to Early Middle Pennsylvanian)time *** absence of the main part of the Middle-Upper Pennsylvanian deposits(continental phase during the Middle Moscovian–Middle Gzhelian)in the Beyşehir-Hoyran Nappes can be mainly attributed to the occurrence of a mantle plume and partially to the effect of Late Paleozoic Gondwanan Glaciation(Glacial Ⅲ).Progressive uplifting by the buoyant mantle plume material has resulted in rifting at the center of the basin where the Beyşehir-Hoyran Nappes have *** rifting process led to tectonic destabiliz

关键词： foraminifera Carboniferous and Permian Beyşehir-Hoyran Nappes plume rifting Neotethys paleontology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design of a large-scale model for wind tunnel test of a multiadaptive flap concept

引用

Chinese Journal of Aeronautics 2024年第2期37卷 58-80页

作者： Mürüvvet Sinem SICIM DEMIRCI Rosario PECORA Metin Orhan KAYA Aeronautical engineering department Istanbul Technical UniversityIstanbulTurkey Industrial engineering department University of Naples Federico IINapoliItaly

The design and application of morphing systems are ongoing issues compelling the aviation *** Clean Sky-program represents the most significant aeronautical research ever launched in Europe on advanced technologies for greening next-generation *** primary purpose of the program is to develop new concepts aimed at decreasing the effects of aviation on the environment,increasing reliability,and promoting eco-friendly *** ambitions are pursued through research on enabling technologies fostering noise and gas emissions reduction,mainly by improving aircraft aerodynamic *** the Clean Sky framework,a multimodal morphing flap device was designed based on tight industrial requirements and tailored for large civil aircraft *** flap is deployed in one unique setting,and its cross section is morphed differently in take-off and landing to get the necessary extra lift for the specific flight ***,during the cruise,the tip of the flap is deflected for load control and induced drag *** manufacturing the first flap prototype,a high-speed(Ma=0.3),large-scale test campaign(geometric scale factor 1:3)was deemed necessary to validate the performance improvements brought by this novel system at the aircraft *** the other hand,the geometrical scaling of the flap prototype was considered impracticable due to the unscalability of the embedded mechanisms and actuators for shape ***,a new architecture was conceived for the flap model to comply with the scaled dimensions requirements,withstand the relevant loads expected during the wind tunnel tests and emulate the shape transition capabilities of the true-scale *** strategies were developed to effectively morph the model during wind tunnel tests while ensuring the robustness of each morphed configuration and maintaining adequate stiffness levels to prevent undesirable deviations from the intended aerodynamic ***,

关键词： Morphing structures Smart aircraft Morphing flap Adaptive systems Finger-like ribs Wind tunnel tests Large-scale morphing archi-tectures Variable camber airfoil

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Antibiotic ciprofloxacin removal from aqueous solutions by electrochemically activated persulfate process:Optimization,degradation pathways,and toxicology assessment

引用

Journal of Environmental Sciences 2024年第9期143卷 85-98页

作者： Elif Yakamercan Ahmet Aygün Halis Simsek Environmental engineering department Bursa Technical UniversityBursaTurkey Agricultural and Biological engineering department Purdue UniversityWest LafayetteINUSA

Ciprofloxacin(CIP)is a commonly used antibiotic in the fluoroquinolone group and is widely used in medical and veterinary medicine disciplines to treat bacterial *** CIP is discharged into the sewage system,it cannot be removed by a conventional wastewater treatment plant because of its recalcitrant *** this study,boron-doped diamond anode and persulfate were used to degrade CIP in an aquatic solution by creating an electrochemically activated persulfate(EAP)*** added to the system as a coactivator and the process was called EAP+*** effects of independent variables,including pH,Fe^(2+),persulfate concentration,and electrolysis time on the systemwere optimized using the response surface *** results showed that the EAP+Fe process removed 94%of CIP under the following optimum conditions:A pH of 3,persulfate/Fe^(2+)concentration of 0.4 mmol/L,initial CIP concentration 30 mg/L,and electrolysis time of 12.64 *** removal efficiency was increased from 65.10%to 94.35%by adding Fe^(2+)as a transition *** degradation products,7 pathways,and 78 intermediates of CIP were studied,and three of those intermediates(m/z 298,498,and 505)were *** toxicological analysis based on toxicity estimation software results indicated that some degradation products of CIP were toxic to targeted animals,including fathead minnow,Daphnia magna,Tetrahymena pyriformis,and *** optimumoperation costswere similar in EAP and EAP+Fe processes,approximately 0.54€/m^(3).

关键词： Ciprofloxacin Response surface methodology Electrochemically activated persulfate Electrooxidation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental study of the damage characteristics of rocks containing non-penetrating cracks under cyclic loading

引用

International Journal of Mining Science and Technology 2024年第2期34卷 197-210页

作者： Jun Xu Xiaochun Xiao Lu Ma Sen Luo Jiaxu Jin Baijian Wu School of Mechanics and engineering Liaoning Technical UniversityFuxin 123000China School of Civil engineering Liaoning Technical UniversityFuxin 123000China department of engineering Mechanics Southeast UniversityNanjing 211189China

The damage evolution process of non-penetrating cracks often causes some unexpected engineering *** specimens containing non-penetrating crack(s)are used to study the damage evolution and characteristics under cyclic *** results show that under cyclic loading,the relationship between the number of non-penetrating crack(s)and the characteristic parameters(cyclic number,peak stress,peak strain,failure stress,and failure strain)of the pre-cracked specimens can be represented by a decreasing linear *** damage evolution equation is fitted by calibrating the accumulative plastic strain for each cycle,and the damage constitutive equation is proposed by the concept of effective ***,non-penetrating cracks are more likely to cause uneven stress distribution,damage accumulation,and local failure of *** local failure can change the stress distribution and relieve the inhibition of non-penetrating crack extension and eventually cause a dramatic destruction of the ***,the evolution process caused by non-penetrating cracks can be regarded as one of the important reasons for inducing *** results are expected to improve the understanding of the process of spalling formation and rockburst and can be used to analyze the stability of rocks or rock structures.

关键词： Damage characteristics Constitutive model Fissured rocks Non-penetrating crack Cyclic loading

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：