检索结果-南通市图书馆

Progress in Natural Science:Materials International 2024年第2期34卷 338-344页

作者： Yuan Li Pengfei Huang Chunyu Cui Xiaoyuan Ma Li Chen Zekun Li Linhai Li Yuhong Tian School of biological and chemical engineering Guangxi University of Science and Technology School of College of Chemistry and chemical engineering Hunan University Isky Future energy Institute

Li metal batteries（LMBs） have attracted much attention due to the ultra-high theoretical capacity of the Li metal anode（LMA）.However,the uncontrollable dendrites growth and low coulombic efficiency hinder their practical ***,we explore 3,5-difluoropyridine（2F-BD） as a novel electrolyte additive to enable highperformance *** 2F-BD additive participates in and modifies the solvation structure of Li ions by reducing the coordinated number of PF6-at the electrode surface,leading to the formation of a LiF and Li3N-rich solid electrolyte interphase（SEI）.The LiF component increases the robustness of SEI and suppresses the formation of Li dendrites,while the Li3N component facilitates the transportation and reaction kinetics of Li *** a result,the Li‖Li symmetric cell presents a stable cycling performance of up to 500 h at a current density of 1 mA *** coupling with LiFePO4cathode,the obtained full cell achieves high specific capacities of 106.06 mA h g-1and 84.98 mA h g-1at 2.55 mA cm-2and 5.10 mA cm-2,respectively,and maintains a high capacity retention of84.0% after 1000 cycles at 0.13 mA cm-2,with an average cycling CE of 99.58%.

关键词： Electrolyte additive Li dendrites Li metal batteries LiF and Li3N-Rich electrode-electrolyte interphase LiFePO4 cathode

Indispensable gutter layers in thin-film composite membranes for carbon capture

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Green energy & Environment 2024年第8期9卷 1220-1238页

作者： Gengyi Zhang Haiqing Lin department of chemical and biological engineering University at Buffalo The State University at New York

Industrial thin-film composite(TFC) membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing. However, the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity, while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers. This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance. We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results. Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed, and the strategies to improve their compatibility with the selective layer are highlighted, such as oxygen plasma treatment, polydopamine deposition, and surface grafting. Finally, we present the opportunities of the gutter layer design for practical applications.

关键词： Thin-film composite membranes Gutter layer Gas separation Carbon capture

An efficient approach for the treatment of radioactive waste perfluoropolyether lubricants via a synergistic effect of thermal catalysis and immobilization

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第2期136卷 512-522页

作者： Xinhang Du Wenhua Tong Xinyu Zhou Jia Luo Yuqiu Liu Yabo Wang Panyu Li Yongkui Zhang department of Pharmaceutical&biological engineering School of Chemical EngineeringSichuan UniversityChengdu 610065China

Perfluoropolyether(PFPE)lubricants are a kind of high-molecular polymer with many excellent ***,the use of PFPEs in the nuclear industry can lead to partial decomposition and carrying radionuclides,resulting in a large amount of radioactive waste PFPE lubricants ***,radioactive waste PFPE lubricants are difficult to be effectively treated due to their high stability,the risk of possible leakage of radionuclides,and hypertoxic fluorine-containing *** this study,without any precedent,a strategy of Mn O_(2)-catalyzed decomposition and Na_(2)CO_(3)-immobilized conversion was proposed for PFPE lubricant decomposition and fluorine immobilization simultaneously based on the Lewis acid-base and oxygen vacancies concept.A high fluorine conversion efficiency of 95.4%was ***,the mechanism of decomposition suggested that Mn O_(2)mainly provided Lewis acid sites and attacked the(basic)fluorine or oxygen atoms in PFPE *** decomposition of PFPE chains was proceed down and volatile fluorine-containing gas was released by partial electron transfer,intramolecular disproportionation reaction,and unzipping ***,gas by-products could be further oxidized and then immobilized into fluoride salts by carbonate solid ***,this study provides a simple,safe,and potentially practical strategy for the harmless conversion of refractory fluorinated organic wastes,especially perfluoropolymers.

关键词： Perfluoropolyether lubricants Catalyzed decomposition Fluorine-containing gas Immobilized conversion Fluoride

维普期刊数据库

Evolution of biomass particles during pelletization process

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 182-187页

作者： Hamid Rezaei Maryam Tajilrou Jun Sian Lee Kanages Singaraveloo Anthony Lau Shahab Sokhansanj Biomass and Bioenergy Research Group Department of Chemical and Biological EngineeringUniversity of British ColumbiaVancouverCanada

Pulverizing is an essential unit operation in co-firing biomass with *** are only compatible with pellet forms of fibrous biomass materials and crush them down to their original forming particle *** is why the data on the size distribution of the particles forming a biomass pellet is crucial to achieving optimum combustion *** current study determines the internal particle size distribution of pellets after wet disintegration,following Iso 17830 standard,and aims to suggest improvements to the mentioned standard based on new measured *** were carried out on white wood pellets(no bark)and brown wood pellets containing bark at four water temperatures:20,40,60,and 95℃,with or without *** particle size distribution of the pre-pelletizer wood particles was also measured and compared with particles in the formed *** water temperature of 20℃ was found to be adequate for the complete disintegration of pellets,and no mechanical stirring was *** 30% of particles in the disintegrated pellets were 0.5-1.0 *** changes the particle size distribution to smaller *** disintegrated bark pellets contained more fines than white pellets.

关键词： Wood pellets Particle sizes distribution Wet disintegration Stirring Water temperature

energy-absorbing porous materials:Bioinspired architecture and fabrication

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 679-690页

作者： Junheng Zhao Meng Li Jiewei Chen Weiwei Gao Hao Bai State Key Laboratory of chemical engineering College of Chemical and Biological EngineeringZhejiang UniversityHangzhou 310058China department of Polymer Science and engineering Zhejiang UniversityHangzhou 310058China

energy-absorbing materials are widely used in transportations,sports,and the military ***,porous materials,including natural and artificial materials,have attracted tremendous attentions due to their light weight and excellent energy absorption *** review summarizes the recent progresses in the natural and artificial energy-absorbing porous ***,we review the typical natural porous materials including cuttlebone,bighorn sheep horn,pomelo peel,and sunflower stem *** architectures,energy absorption abilities,and mechanisms of these typical natural materials and their bioinspired materials are ***,we provide a review on the fabrication methods of artificial energy-absorbing porous materials,such as conventional foaming and three-dimensional(3D)***,we address the challenges and prospects for the future development of energy-absorbing porous *** importantly,our review provides a direct guidance for the design and fabrication of energy-absorbing porous materials required for various engineering applications.

关键词： energy-absorbing porous materials natural materials natural structures bioinspired materials

Securing offshore resources development: A mathematical investigation into gas leakage in long-distance flexible pipes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2734-2744页

作者： Xiang-An Lu Liang-Liang Jiang Jian-Sheng Zhang Min-Gui Wang Guangling College of Yangzhou University department of chemical and Petroleum engineering University of Calgary department of energy and Power engineering Tsinghua University

Gas flexible pipes are critical multi-layered equipment for offshore oil and gas development. Under high pressure conditions, small molecular components of natural gas dissolve into the polymer inner liner of the flexible pipes and further diffuse into the annular space, incurring annular pressure build-up and/or production of acidic environment, which poses serious challenges to the structure and integrity of the flexible pipes. Gas permeation in pipes is a complex phenomenon governed by various factors such as internal pressure and temperature, annular structure, external temperature. In a long-distance gas flexible pipe, moreover, gas permeation exhibits non-uniform features, and the gas permeated into the annular space flows along the metal gap. To assess the complex gas transport behavior in long-distance gas flexible pipes, a mathematical model is established in this paper considering the multiphase flow phenomena inside the flexible pipes, the diffusion of gas in the inner liner, and the gas seepage in the annular space under varying permeable properties of the annulus. In addition, the effect of a variable temperature is accounted. A numerical calculation method is accordingly constructed to solve the coupling mathematical equations. The annular permeability was shown to significantly influence the distribution of annular pressure. As permeability increases, the annular pressure tends to become more uniform, and the annular pressure at the wellhead rises more rapidly. After annular pressure relief followed by shut-in, the pressure increase follows a convex function. By simulating the pressure recovery pattern after pressure relief and comparing it with test results, we deduce that the annular permeability lies between 123 and 512 m D. The results help shed light upon assessing the annular pressure in long distance gas flexible pipes and thus ensure the security of gas transport in the emerging development of offshore resources.

关键词： Offshore resources development Transport security Long-distance flexible pipes Gas leakage Heat and mass transfer model Finite difference calculation

Convenient room-temperature synthesis of sulfur and nitrogen co-doped NiCo-LDH coupled with CNTs on NiCo foam as battery-type electrode for high performance hybrid supercapacitor

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4286-4301页

作者： Li Song Xiao-Hong Zhong Fang-Lin Wang Zhi-Hui Huang Zhe Hong Yun-Fang Gao Hai-Dong Wang Jian-Wei Ren Sheng-Jie Peng Lei Li College of biological Chemical Sciences and EngineeringJiaxing University College of chemical engineering Zhejiang University of Technology College of Materials Science and Technology Nanjing University of Aeronautics and Astronautics Research and Development department Jiangxi Ganfeng Li Energy Technology Co.Ltd. department of Mechanical engineering Science University of Johannesburg

The convenient synthesis of the composite electrode with high supercapacitance performance plays an important role in practical application but is ***, the carbon nanotubes（CNTs） coupled with lowcrystalline sulfur and nitrogen co-doped Ni Co-LDH（denoted as SN-Ni Co-LDH） nanosheets array are grown on Ni Co foam（NCF） substrate by two convenient steps of metal induced self-assembly and corrosion engineering,which present the advantages of operating at roomtemperature and low preparation costs. Benefiting from the S–N co-doping and low-crystallinity of Ni Co-LDH, the prepared SN-Ni Co-LDH@CNTs@NCF electrode presents a topping charge capacity of 2470 C·g-1(4.94 C·cm-2) at 5 m A·cm-2. Furthermore, the fabricated asymmetry supercapacitor（ASC） achieves an extraordinary energy density of 77 Wh·kg-1(0.617 m Wh·cm-2) at a power density of 438 W·kg-1(3.5 m W·cm-2) and outstanding stability(91% capacity retention after 5000 cycles at20 m A·cm-2). Impressively, the structure evolution of Ni Co-LDH during the charge/discharge processes has been thoroughly elucidated by in-situ Raman spectra. Therefore,this work verifies a powerful strategy and practical value for preparing composite electrodes with high supercapacitance performance, and also provides guidance for the rational design of the smart electrodes.

关键词： Carbon nanotubes Convenient synthesis NiCo-LDH Sulfur and nitrogen co-doped Supercapacitor

Acetylacetone-TiO_(2) Promoted Large Area Compatible Cascade Electron Transport Bilayer for Efficient Perovskite Solar Cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

energy & Environmental Materials 2024年第2期7卷 221-228页

作者： Hyong Joon Lee Jin Kyoung Park Jin Hyuck Heo Sang Hyuk Im department of chemical and biological engineering Korea University145 Anam-ro Seongbuk-guSeoul 17104Korea

In designing efficient perovskite solar cells(PSCs),the selection of suitable electron transport layers(ETLs)is critical to the final device performance as they determine the driving force for selective charge ***_(2)nanoparticles(NPs)based ETLs have been a popular choice for PSCs due to superior electron mobility,but their relatively deep-lying conduction band energy levels(ECB)result in substantial potential ***,TiO_(2)NPs establish favorable band alignment owing to shallower ECB,but their low intrinsic mobility and abundant surface trap sites impede the final *** this reason,constructing a cascaded bilayer ETL is highly desirable for efficient PSCs,as it can rearrange energy levels and exploit on advantages of an individual *** this study,we prepare SnO_(2)NPs and acetylacetone-modified TiO_(2)(Acac-TiO_(2))NPs and implement them as bilayer SnO_(2)/Acac-TiO_(2)(BST)ETL,to assemble cascaded energy band ***_(2)contributes to rapid charge carrier transport from high electron mobility while Acac-TiO_(2)minimizes band-offset and effectively suppresses interfacial ***,the optimized BST ETL generates synergistic influence and delivers power conversion efficiency(PCE)as high as 23.14%with open-circuit voltage(V_(oc))reaching 1.14 ***,the BST ETL is transferred to a large scale and the corresponding mini module demonstrates peak performance of 18.39%PCE from 25 cm^(2)aperture ***,the BST-based mini module exhibit excellent stability,maintaining 83.1%of its initial efficiency after 1000 h under simultaneous 1 Sun light-soaking and damp heat(85℃/RH 85%)environment.

关键词： acetylacetone large area perovskite solar cells TiO_(2)

维普期刊数据库

Achieving a superior Na storage performance of Fe-based Prussian blue cathode by coating perylene tetracarboxylic dianhydride amine

在线全文

学校读者我要写书评

暂无评论

Carbon energy 2024年第5期6卷 53-64页

作者： Xin-Yuan Fu Lu-Lu Zhang Zhao-Yao Chen Yunkai Xu Junxiu Wu Cheng-Cheng Wang Xiao-Kai Ding Xue-Lin Yang Jun Lu Hubei Provincial Collaborative Innovation Center for New energy Microgrid College of Electrical Engineering&New EnergyChina Three Gorges UniversityYichangHubeiChina College of Materials and chemical engineering China Three Gorges UniversityYichangHubeiChina College of chemical and biological engineering Zhejiang UniversityHangzhouChina

Fe-based Prussian blue(Fe-PB)cathode material shows great application potential in sodium(Na)-ion batteries due to its high theoretical capacity,long cycle life,low cost,and simple preparation ***,the crystalline water and vacancies of Fe-PB lattice,the low electrical conductivity,and the dissolution of metal ions lead to limited capacity and poor cycling *** this work,a perylene tetracarboxylic dianhydride amine(PTCDA)coating layer is successfully fabricated on the surface of Fe-PB by a liquid-phase *** aminated PTCDA(PTCA)coating not only increases the specific surface area and electronic conductivity but also effectively reduces the crystalline water and vacancies,which avoids the erosion of Fe-PB by ***,the PTCA layer reduces the charge transfer resistance,enhances the Na-ion diffusion coefficient,and improves the structure *** PTCA-coated Fe-PB exhibits superior Na storage performance with a first discharge capacity of 145.2 mAh g^(−1) at 100 mA g^(−1).Long cycling tests exhibit minimal capacity decay of 0.027%per cycle over 1000 cycles at 1 A g^(−1).Therefore,this PTCA coating strategy has shown promising competence in enhancing the electrochemical performance of Fe-PB,which can potentially serve as a universal electrode coating strategy for Na-ion batteries.

关键词： cathode material coating Fe-based Prussian blue Na-ion batteries perylene tetracarboxylic dianhydride amine

Numerical Analysis of PRISM-PY Calculations for Hard-and Soft-Core Generic Polymer Models

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第4期42卷 532-543页

作者： Qiang Wang department of chemical and biological engineering Colorado State University1370 Campus DeliveryFort CollinsCO80523-1370USA

Generic polymer models capturing the chain connectivity and excluded-volume interactions between polymer segments can be classified, according to whether or not the 3D integral of the latter diverges, into hard- and soft-core models. Taking homogeneous systems of compressible homopolymer melts (or equivalently homopolymer solutions in an implicit, good solvent) in the continuum as an example, we recently compared the correlation effects on the structural and thermodynamic properties of the hard- and soft-core models given by the polymer reference interaction site model (PRISM) theory with the Percus-Yevick (PY) closure (Polymers 2023, 15, 1180). Here we analyzed in detail the numerical errors and behavior of the interchain pair correlation functions (PCFs) given by the PRISM-PY calculations of these models using an efficient numerical approach that we proposed. Our numerical approach has the least number of independent variables to be iteratively solved, analytically treats the discontinuities caused by the non-bonded pair potential (such as that of the hard spheres) and takes only the inverse Fourier transform of the interchain indirect PCF between polymer segments (which is continuous and decays towards 0 with increasing wavenumber much faster than both the interchain direct and total PCFs), and is essential for us to accurately solve the PRISM-PY theory for chain length N as large as 106. To capture the correlation-hole effect, the real-space cut-off in the PRISM calculations should be proportional to the square root of N.

关键词： Generic polymer models Soft potentials Polymer reference interaction site model theory

维普期刊数据库