检索结果-南通市图书馆

Enhanced Crystallization of Poly(butylene adipate-co-terephthalate)by a Self-assembly Nucleating Agent

Chinese Journal of Polymer Science 2024年第5期42卷 663-674,I0010页

作者： Cheng Zhou Kun Chen Zi-Heng Zhang Meng-Fan Jing Chun-Tai Liu Chang-Yu Shen Ya-Ming Wang State Key Laboratory of Structural Analysis Optimization and CAE Software for Industrial EquipmentNational Engineering Research Center for Advanced Polymer Processing TechnologyZhengzhou UniversityZhengzhou450002China

Poly(butylene adipate-co-terephthalate)(PBAT)is a promising biodegradable flexible polymer but suffers from slow crystallization rate,making it less attractive for some applications like the injection-molded products in comparison with low-density polyethylene(LDPE).This work aimed to accelerate the crystallization of PBAT by adding a self-assembly nucleating agent octamethylenedicarboxylic dibenzoylhydrazide(OMBH).PBAT/OMBH composites with various OMBH contents(0 wt%,0.5 wt%,0.7 wt%,1 wt%,2 wt%,3 wt%and 5 wt%)were prepared through *** effect of OMBH on the crystallization behavior,morphologies and mechanical properties of PBAT was *** highest nucleation efficiency value of 59.6%was achieved for PBAT with 0.7 wt%OMBH,much higher than that of 22.7%for PBAT with 0.7 wt%*** force microscopy results showed that OMBH formed fine fibers and induced the formation of transcrystalline layers of *** transform infrared spectroscopy(FTIR)combined with two-dimensional correlation spectra suggested that the intermolecular dipole-dipole N—H…O=C interactions but not hydrogen bond between OMBH and PBAT promoted the crystallization of PBAT in the initial period of *** presence of OMBH did not change the crystal form of PBAT but had positive contribution in enhancing its crystallinity and mechanical *** work is essential for preparing PBAT with high crystallization rate,enhancing its potential applications in injection-molded products.

关键词： Poly(butylene adipate-co-terephthalate) Biodegradable Self-assembly nucleating agent Crystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cooperative decision-making algorithm with efficient convergence for UCAV formation in beyond-visual-range air combat based on multi-agent reinforcement learning

引用

Chinese Journal of Aeronautics 2024年第8期37卷 311-328页

作者： Yaoming ZHOU Fan YANG Chaoyue ZHANG Shida LI Yongchao WANG School of Aeronautic Science and engineering Beihang UniversityBeijing 100191China Key Laboratory of industrial Control Technology Institute of Cyber-Systems and ControlZhejiang UniversityHangzhou 310027China

Highly intelligent Unmanned Combat Aerial Vehicle(UCAV)formation is expected to bring out strengths in Beyond-Visual-Range(BVR)air *** Multi-Agent Reinforcement Learning(MARL)shows outstanding performance in cooperative decision-making,it is challenging for existing MARL algorithms to quickly converge to an optimal strategy for UCAV formation in BVR air combat where confrontation is complicated and reward is extremely sparse and *** to solve this problem,this paper proposes an Advantage Highlight Multi-Agent Proximal Policy Optimization(AHMAPPO)***,at every step,the AHMAPPO records the degree to which the best formation exceeds the average of formations in parallel environments and carries out additional advantage sampling according to ***,the sampling result is introduced into the updating process of the actor network to improve its optimization ***,the simulation results reveal that compared with some state-of-the-art MARL algorithms,the AHMAPPO can obtain a more excellent strategy utilizing fewer sample episodes in the UCAV formation BVR air combat simulation environment built in this paper,which can reflect the critical features of BVR air *** AHMAPPO can significantly increase the convergence efficiency of the strategy for UCAV formation in BVR air combat,with a maximum increase of 81.5%relative to other algorithms.

关键词： Unmanned combat aerial vehicle(UCAV)formation Decision-making Beyond-visual-range(BVR)air combat Advantage highlight Multi-agent reinforcement learning(MARL)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Alkali Tolerance of Concrete Internal Curing Agent Based on Sodium Carboxymethyl Starch

引用

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 82-90页

作者：陈梅花刘荣进 CHEN Ping JING Daiyan WAN Dandan FU Siyuan College of Materials Science and engineering Guilin University of TechnologyGuilin 541004China Guangxi engineering and Technology Center for Utilization of industrial Waste Residue in Building Materials Guilin 541004China Guangxi Maibu New Material Limited Company Guilin 541004China

Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of *** alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using sodium carboxymethyl starch (CMS) with high hydrophilicity,acrylic acid (AA) containing anionic carboxylic group and acrylamide (AM) containing non-ionic amide group as the main raw *** results show that the ratio of CAA-ICA alkali absorption solution is higher than that existing ICA,which solves the low water absorption ratio of the ICA in alkali *** water absorption ratio of CAA-ICA in saturated Ca(OH)_(2) solution is 95.8 g·g^(-1),and the alkali tolerance coefficient is *** application of CAA-ICA in cement-based materials can increase the internal relative humidity and miniaturize the pore *** compressive strength of mortar increases up to 12.95%at 28 d,which provids a solution to overcome the reduction of the early strength.

关键词： alkali tolerance sodium carboxymethyl starch internal curing agent compressive strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Metal size effects over metal/zeolite bifunctional catalysts in the selective hydroalkylation of benzene

引用

Frontiers of Chemical Science and engineering 2024年第4期18卷 107-114页

作者： Junjie Li Chuang Liu Zhenlong Jia Yingchun Ye Dawei Lan Wei Meng Jianqiang Wang Zhendong Wang Yongfeng Hu Weimin Yang State Key Laboratory of Green Chemical engineering and industrial Catalysis Sinopec Shanghai Research Institute of Petrochemical Technology Co.Ltd.Shanghai 201208China School of Chemical engineering East China University of Science and TechnologyShanghai 200237China

Bifunctional metal/zeolite materials are some of the most suitable catalysts for the direct hydroalkylation of benzene to *** overall catalytic performance of this reaction is strongly influenced by the hydrogenation,which is dependent on the metal ***,systematically investigating the metal size effects in the hydroalkylation of benzene is *** this work,we successfully synthesized Ru and Pd nanoparticles on Sinopec Composition Materials No.1 zeolite with various metal *** demonstrated the size-dependent catalytic activity of zeolite-supported Ru and Pd catalysts in the hydroalkylation of benzene,which can be attributed to the size-induced hydrogen spillover capability *** work presents new insights into the hydroalkylation reaction and may open up a new avenue for the smart design of advanced metal/zeolite bi-functional catalysts.

关键词： size effects bifunctional catalysts metal/zeolite hydroalkylation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Lattice Boltzmann simulation study of anode degradation in solid oxide fuel cells during the initial aging process

引用

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 405-411页

作者： Shixue Liu Zhijing Liu Shuxing Zhang Hao Wu Hydrogen Energy industrial Technology Innovation Center China Nuclear Power Technology Research InstituteShenzhen 518031China Shenzhen engineering Research Center for Hydrogen Safety Shenzhen 518031China

For present solid oxide fuel cells(SOFCs),rapid performance degradation is observed in the initial aging process,and the dis-cussion of the degradation mechanism necessitates quantitative ***,focused ion beam-scanning electron microscopy was em-ployed to characterize and reconstruct the ceramic microstructures of SOFC *** lattice Boltzmann method(LBM)simulation of multiphysical and electrochemical processes in the reconstructed models was *** samples collected from industrial-size cells were characterized,including a reduced reference cell and a cell with an initial aging *** parameters of the reconstructed microstructures revealed a significant decrease in the active triple-phase boundary and Ni connectivity in the aged cell compared with the reference *** LBM simulation revealed that activity degradation is dominant compared with microstructural degradation during the initial aging process,and the electrochemical reactions spread to the support layer in the aged *** microstructural and activity de-gradations are attributed to Ni migration and coarsening.

关键词： solid oxide fuel cell anode degradation focused ion beam-scanning electron microscopy lattice Boltzmann method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhancement in the Hg^(0) oxidation efficiency and sulfur resistance of CuCl_(2)-modified MnO_(x)-CeO_(x) nanorod catalysts

引用

Journal of Zhejiang University-Science A(Applied Physics & engineering) 2024年第8期25卷 680-686页

作者： Shujie GAO Yongjin HU Zhichang JIANG Xiaoxiang WANG Dong YE Changxing HU College of Quality&Safety engineering China Jiliang UniversityHangzhou 310018China Key Laboratory of Biomass Chemical engineering of Ministry of Education Institute of Industrial Ecology and EnvironmentCollege of Chemical and Biological EngineeringZhejiang UniversityHangzhou 310027China School of Mechatronics and Energy engineering Ningbo Tech UniversityNingbo 315100China

In this study,a series of CuCl_(2)-modified MnO_(x)-CeO_(x)nanorods were synthesized for the oxidation of Hg^(0).The addition of CuCl_(2)resulted in an enhancement in the catalyst’s Hg^(0)oxidation ability,and Hg^(0)oxidation efficiency reached>97%from 150 to 250°*** the MnO_(x)-CeO_(x)catalysts,Mn^(4+)played the role of the active species for Hg^(0)oxidization,but in the CuCl_(2)-doped catalysts Cl−also contributed to Hg^(0)oxidation,conferring the superior performance of these *** introduction of SO_(2) led to a decrease in the availability of Mn^(4+),and the Hg^(0)oxidation efficiency of MnO_(x)-CeO_(x)decreased from about 100%to about 78%.By contrast,CuCl_(2)-promoted samples maintained a Hg^(0)oxidation efficiency of about 100%during the SO_(2) deactivation cycle due to the high reactivity of Cl−.

关键词： Hg^(0)oxidation CuCl_(2)modification MnO_(x)-CeO_(x)nanorods Sulfur resistance O_(x)idation activity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Corrosion Investigation by Scanning Electrochemical Microscopy of AISI 446 and Ti-Coated AISI 446 Ferritic Stainless Steel as Potential Material for Bipolar Plate in PEMWE

引用

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 607-619页

作者： Andrea Kellenberger Nicolae Vaszilcsin Mircea Laurentiu Dan Ion Mitelea Alexandru Adrian Geana Sigrid Lædre Corneliu M.Craciunescu Faculty of industrial Chemistry and Environmental engineering Politehnica University TimisoaraPiata Victoriei 2300006TimisoaraRomania Faculty of Mechanical engineering Politehnica University TimisoaraPiata Victoriei 2300006TimisoaraRomania SINTEF Industry 7465TrondheimNorway

The components of proton exchange membrane water electrolysers frequently experience corrosion issues, especially at high anodic polarization, that restrict the use of more affordable alternatives to titanium. Here, we investigate localized corrosion processes of bare and Ti-coated AISI 446 ferritic stainless steel under anodic polarization by scanning electrochemical microscopy (SECM) in sodium sulphate and potassium chloride solutions. SECM approach curves and area scans measured at open-circuit potential (OCP) of the samples in the feedback mode using a redox mediator evidence a negative feedback effect caused by the surface passive film. For the anodic polarization of the sample, the substrate generation-tip collection mode enables to observe local generation of iron (II) ions, as well as formation of molecular oxygen. For the uncoated AISI 446 sample, localized corrosion is detected in sodium sulphate solution simultaneously with oxygen formation at anodic potentials of 1.0 V vs. Ag/AgCl, whereas significant pitting corrosion is observed even at 0.2 V vs. Ag/AgCl in potassium chloride solution. The Ti-coated AISI 446 sample reveals enhanced corrosion resistance in both test solutions, without any evidence of iron (II) ions generation at anodic potentials of 1.2 V vs. Ag/AgCl, where only oxygen formation is observed.

关键词： Ferritic stainless steel Corrosion Ti coating Scanning electrochemical microscopy(SECM) Magnetron sputtering Proton exchange membrane water electrolysis(PEMWE)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimization Design of the Multi-Layer Cross-Sectional Layout of An Umbilical Based on the GA-GLM

引用

China Ocean engineering 2024年第2期38卷 247-254页

作者： YANG Zhi-xun YIN Xu FAN Zhi-rui YAN Jun LU Yu-cheng SU Qi MAO Yandong WANG Hua-lin Institute of marine machinery College of Mechanical and Electrical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Structural Analysis Optimization and CAE Software for Industrial EquipmentDepartment of Engineering MechanicsDalian University of TechnologyDalian 116024China Ningbo Institube of Dalian University of Technology Ningbo 315040China

Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with *** layout of these components directly affects manufacturing,operation and storage performances of the *** the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage *** the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional ***,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent *** algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout *** feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate ***,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is ***,the multi-layering strategy is effective and *** design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.

关键词： umbilical cross-sectional layout multi-layers GA-GLM optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Transforming liquid flow fuel cells to controllable reactors for highlyefficient oxidation of 5-hydroxymethylfurfural to 2, 5-furandicarboxylic acid at low temperature

引用

Journal of Energy Chemistry 2024年第3期90卷 621-631,I0014页

作者： Ye Qiang Xi Liu Denghao Ouyang Zhao Jiang Xuebing Zhao Key Laboratory of industrial Biocatalysis Ministry of EducationTsinghua UniversityBeijing 100084China Institute of Applied Chemistry Department of Chemical EngineeringTsinghua UniversityBeijing 100084China School of Chemical engineering and Technology Xi'an Jiaotong UniversityXi'an 710049ShaanxiChina

Highly-efficient oxidation of 5-hydroxymethylfurtural(HMF) to 2,5-furandicarboxylic acid(FDCA) at low temperature with air as the oxidant is still ***,inspired by the respirato ry electron transport chain(ETC) of living cells mediated by electron carriers,we constructed artificial ETCs and transformed liquid flow fuel cells(LFFCs) to flexible reactors for efficient oxidation of HMF to produce FDCA under mild *** LFFC reactor employed an electrodeposition modified nickel foam as an anode to promote HMF oxidation and(VO_(2))_(2)SO_(4) as a cathode electron carrier to facilitate the electron transfer to *** reaction rate could be easily controlled by selecting the anode catalyst,adjusting the external loading and changing the cathodic electron carrier or oxidants.A maximal power density of 44.9 mW cm^(-2) at room temperature was achieved,while for FDCA production,short-circuit condition was preferred to achieve quick transfer of *** a single batch operation with 0.1 M initial HMF,FDCA yield reached 97.1%.By fed-batch operation,FDCA concentration reached 144.5 g L^(-1) with a total yield of 96%.Ni^(2+)/Ni^(3+) redox couple was the active species mediating the electron transfer,while both experimental and DFT calculation results indicated that HMFCA pathway was the preferred reaction mechanism.

关键词： 5-Hydroxymethylfurfural 2 5-Furandicarboxylic acid Electrodeposition Electron transport chain Liquid flow fuel cell

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanism of slag pellets sticking on the wall of reduction pot in magnesium production by Pidgeon process

引用

Journal of Magnesium and Alloys 2024年第6期12卷 2397-2412页

作者： Jilei Xu Jinhui Liu Dong Guo Mao Chen Peixu Yang Rongbin Li Shaojun Zhang School of Materials Science and engineering Zhengzhou UniversityZhengzhou 450001China Henan Province industrial Technology Research Institute of Resources and Materials Zhengzhou UniversityZhengzhou 450001China School of Metallurgical and Ecological engineering University of Science and Technology BeijingBeijing 100083China

In the preparation of magnesium by Pidgeon process,the phenomenon slag pellets sticking on the wall of reduction pot always appear,and the glaze sticking on the inner wall of the reduction pot is difficult to *** mechanism of this phenomenon is studied in this work by X-ray fluorescence spectrometer(XRF)measurement,electron probe microanalyzer scanning(EPMA)analysis,differential scanning calorimetry(DSC)analysis,and thermodynamic *** main components of the glaze are MgO,Ca_(12)Al_(14)F_(2)O_(32),CaF_(2),CaO,and a small amount of Ca_(4)Si_(2)O_(7)F_(2).The solid-liquid transition temperature of Ca_(12)Al_(14)F_(2)O_(32)and CaF_(2)is close to the production temperature of Pidgeon process,which leads to the bonding between the slag pellets and the pot *** loss of CaF_(2)in glaze layer will reduce the total amount of liquid phase and increase the temperature at which Ca_(12)Al_(14)F_(2)O_(32)is completely transformed into liquid phase,which causes glaze layer sticking on the inner wall of the reduction pot.

关键词： Pidgeon process Glaze Ca_(12)Al_(14)F_(2)O_(32) CaF_(2) Solid-liquid transition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：