检索结果-南通市图书馆

Effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on tensile and bending properties of high-Al-containing Mg alloys

引用

Journal of Magnesium and Alloys 2024年第2期12卷 779-793页

作者： Sumi Jo Gyo Myeong Lee Jong Un Lee Young Min Kim Sung Hyuk Park School of materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Magnesium Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on the uniaxial tensile and three-point bending properties of extruded Mg alloys containing high Al *** extruded Mg–9Al–1Zn–0.3Mn(AZ91)alloy contains lamellar-structured Mg_(17)Al_(12)discontinuous precipitates along the grain boundaries,which are formed via static precipitation during natural air *** extruded Mg–11Al–1Zn–0.3Mn(AZ111)alloy contains spherical Mg_(17)Al_(12)precipitates at the grain boundaries and inside the grains,which are formed via dynamic precipitation during *** to inhomogeneous distribution of precipitates,the AZ111 alloy consists of two different precipitate regions:precipitate-rich region with numerous precipitates and finer grains and precipitate-scarce region with a few precipitates and coarser *** AZ111 alloy exhibits a higher tensile strength than the AZ91 alloy because its smaller grain size and more abundant precipitates result in stronger grain-boundary hardening and precipitation hardening effects,***,the tensile elongation of the AZ111 alloy is lower than that of the AZ91 alloy because the weak cohesion between the dynamic precipitates and the matrix facilitates the crack initiation and *** bending,a macrocrack initiates on the outer surface of bending specimen in both *** AZ111 alloy exhibits higher bending yield strength and lower failure bending strain than the AZ91 *** bending specimens of the AZ91 alloy have similar bending formability,whereas those of the AZ111 alloy exhibit considerable differences in bending formability and crack propagation behavior,depending on the distribution and number density of precipitates in the *** bending specimens of the AZ111 alloy,it is found that the failure bending strain(ε_(f,bending))is inversely proportional to the area fraction of precipitates in the outer zone of bending specimen(A_(ppt)),with a relation

关键词： Mg–Al alloy Extrusion Bending Precipitation Microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surface-modified Ag@Ru-P25 for photocatalytic CO_(2) conversion with high selectivity over CH_(4) formation at the solid–gas interface

引用

Carbon Energy 2024年第1期6卷 182-196页

作者： Chaitanya B.Hiragond Sohag Biswas Niket SPowar Junho Lee Eunhee Gong Hwapyong Kim Hong Soo Kim Jin-Woo Jung Chang-Hee Cho Bryan M.Wong Su-Il In Department of Energy Science&Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)DaeguRepublic of Korea Department of Chemical&Environmental Engineering Materials Science&Engineering ProgramDepartment of ChemistryDepartment of Physics&AstronomyUniversity of California-RiversideRiversideCaliforniaUSA Department of Physics and Chemistry Daegu Gyeongbuk Institute of Science and Technology(DGIST)DaeguRepublic of Korea NiceScience Corporation DaeguRepublic of Korea

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective *** doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) ***-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction *** optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.

关键词： gas-phase CO_(2) reduction H_(2)O_(2) treatment plasmonic nanoparticles solar fuel photocatalyst surface modification

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Recent Advances in Patterning Strategies for Full‑Color Perovskite Light‑Emitting Diodes

引用

Nano-Micro Letters 2024年第3期16卷 99-137页

作者： Gwang Heon Lee Kiwook Kim Yunho Kim Jiwoong Yang Moon Kee Choi Graduate School of Semiconductor materials and Devices Engineering Center for Future Semiconductor Technology(FUST)Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Energy Science and Engineering Research Center Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of materials Science and Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Center for Nanoparticle Research Institute for Basic Science(IBS)Seoul 08826Republic of Korea

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability,pure color emission with remarkably narrow bandwidths,high quantum yield,and solution *** recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes(PeLEDs)to their theoretical limits,their current fabrication using the spincoating process poses limitations for fabrication of full-color *** integrate PeLEDs into full-color display panels,it is crucial to pattern red–green–blue(RGB)perovskite pixels,while mitigating issues such as cross-contamination and reductions in luminous ***,we present state-of-the-art patterning technologies for the development of full-color ***,we highlight recent advances in the development of efficient ***,we discuss various patterning techniques of MPHs(i.e.,photolithography,inkjet printing,electron beam lithography and laserassisted lithography,electrohydrodynamic jet printing,thermal evaporation,and transfer printing)for fabrication of RGB pixelated *** patterning techniques can be classified into two distinct approaches:in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite *** review highlights advancements and limitations in patterning techniques for PeLEDs,paving the way for integrating PeLEDs into full-color panels.

关键词： Perovskite Light-emitting diode Full-color display High-resolution patterning Electroluminescence

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

引用

Journal of Magnesium and Alloys 2024年第1期12卷 186-196页

作者： Sujeong Byun Jinyeong Yu Seho Cheon Seong Ho Lee Sung Hyuk Park Taekyung Lee School of Mechanical Engineering Pusan National UniversityBusan 46241South Korea School of materials Science and Engineering Kyungpook National UniversityDaegu 41566South Korea

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading *** characteristic results in a diverse range of flow curves that vary with a deformation *** study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data *** developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)*** proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset *** model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading *** GAN-aided GRU results were superior to those of previous ML models and constitutive *** superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for *** a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

关键词： Plastic anisotropy Compression Annealing Machine learning Data augmentation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Biomimetic Fe_(7)S_(8)/Carbon electrocatalyst from[FeFe]-Hydrogenase for improving pH-Universal electrocatalytic hydrogen production Special Collection:Aggregation-Induced Processes and Functions

Aggregate

引用

Aggregate 2024年第1期5卷 451-459页

作者： Dohun Kim Subramani Surendran Sejin Im Jaehyoung Lim Kyoungsuk Jin Ki Tae Nam Uk Sim Department of Energy Science&Engineering Daegu Gyeongbuk Institute of Science&Technology(DGIST)DaeguRepublic of Korea Hydrogen Energy Technology Laboratory Korea Institute of Energy Technology(KENTECH)NajuRepublic of Korea Department of Chemistry Korea UniversitySeoulRepublic of Korea Department of materials Science and Engineering Seoul National UniversitySeoulRepublic of Korea

Efficient and cost-effective electrocatalysts that can operate across a wide range of pH conditions are essential for green hydrogen *** by biological systems,Fe_(7)S_(8)nanoparticles incorporated on polydopamine matrix electrocatalyst were synthesized by co-precipitation and annealing *** resulting Fe_(7)S_(8)/C electrocatalyst possesses a three-dimensional structure and exhibits enhanced electrocatalytic performance for hydrogen production across various pH ***,the Fe_(7)S_(8)/C electrocatalyst demonstrates exceptional activity,achieving low overpotentials of 90.6,45.9,and 107.4 mV in acidic,neutral,and alkaline environments,*** impedance spectroscopy reveals that Fe_(7)S_(8)/C exhibits the lowest charge transfer resistance under neutral conditions,indicating an improved proton-coupled electron transfer ***-wave electron paramagnetic resonance results confirm a change in the valence state of Fe from 3+to 1+during the hydrogen evolution reaction(HER).These findings closely resemble the behavior of natural[FeFe]-hydrogenase,known for its superior hydrogen production in neutral *** remarkable performance of our Fe_(7)S_(8)/C electrocatalyst opens up new possibilities for utilizing bioinspired materials as catalysts for the HER.

关键词： biomimetic electrocatalyst hydrogen production renewable energy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Unravelling the role of the combined effect of metallic charge transfer channel and SiO_(x) overlayer in the Zr/Si-Fe_(2)O_(3):Au:SiO_(x) nanorod arrays to boost photoelectrochemical water splitting

引用

Journal of Energy Chemistry 2024年第3期90卷 370-379,I0009页

作者： Tae Sik Koh Periyasamy Anushkkaran Love Kumar Dhandole Mahadeo A.Mahadik Weon-Sik Chae Hyun Hwi Lee Sun Hee Choi Jum Suk Jang Division of Biotechnology SafetyEnvironment and Life Science InstituteCollege of Environmental and Bioresource SciencesJeonbuk National UniversityIksan 54896Republic of Korea Department of Integrative Environmental Biotechnology College of Environmental and Bioresource SciencesJeonbuk National UniversityIksan 54596Republic of Korea Extreme materials Research Center Korea Institute of Science and Technology(KIST)Seoul 02792Republic of Korea daegu Center Korea Basic Science InstituteDaegu 41566Republic of Korea Pohang Accelerator Laboratory Pohang University of Science and Technology(POSTECH)Pohang 37673Republic of Korea

Hematite(α-Fe_(2)O_(3)) based photoanodes have been extensively studied due to various intriguing features that make them viable candidates for a photoelectrochemical(PEC) water splitting ***,we propose a Zr-doped Fe_(2)O_(3) photoanode decorated with facilely spin-coated Au nanoparticles(NPs) and microwave-assisted attached Si co-doping in conjunction with a SiO_(x) overlayer that displayed a remarkable photocurrent density of 2.01 mA/cm^(2) at 1.23 V *** kinetic dynamics at the photoelectrode/-electrolyte interface was examined by employing systematic electrochemical *** Au NPs played a dual role in increasing PEC water ***,the Schottky interface that was formed between Au NPs and Zr-Fe_(2)O_(3) lectrode ensured the prevention of electron flow from the photoanode to the metal,increasing the number of available charges as well as suppressing surface charge ***,Au extracted photoholes from the bulk of the Zr-Fe_(2)O_(3) and transported them to the outer SiO_(x) overlayer,while the SiO_(x) overlayer efficiently collected the photoholes and promoted the hole injection into the ***,Si co-doping enhanced bulk conductivity by reducing bulk charge transfer resistance and improving charge carrier *** study outlines a technique to design a metallic charge transfer path with an overlayer for solar energy conversion.

关键词： Hematite Microwave attachment Au nanoparticles SiO_(x) overlayer Water splitting

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nacre-inspired MXene-based film for highly sensitive piezoresistive sensing over a broad sensing range

引用

Bio-Design and Manufacturing 2024年第4期7卷 463-475页

作者： Gaofeng Wang Lingxian Meng Xinyi Ji Xuying Liu Jiajie Liang Shuiren Liu School of materials Science and Engineering Zhengzhou UniversityZhengzhou 450001China School of materials Science and Engineering National Institute for Advanced MaterialsNankai UniversityTianjin 300350China

As the main component of wearable electronic equipment,flexible pressure sensors have attracted wide attention due to their excellent sensitivity and their promise with respect to applications in health monitoring,electronic skin,and human-computer ***,it remains a significant challenge to achieve epidermal sensing over a wide sensing range,with short response/recovery time and featuring seamless conformability to the skin *** is critical since the capture of minute electrophysiological signals is important for health care *** this paper,we report the preparation of a nacre-like MXene/sodium carboxymethyl cellulose(CMC)nanocomposite film with a“brick-and-mortar”interior structure using a vacuum-induced self-assembly *** synergistic behavior of the MXene“brick”and flexible CMC“mortar”contributes to attenuating interlamellar self-stacking and creates numerous variable conductive pathways on the sensing *** resulted in a high sensitivity over a broad pressure range(i.e.,0.03-22.37 kPa:162.13 kPa^(-1);22.37-135.71 kPa:127.88 kPa^(-1);135.71-286.49 kPa:100.58 kPa^(-1)).This sensor also has a low detection limit(0.85 Pa),short response/recovery time(8.58 ms/34.34 ms),and good stability(2000 cycles).Furthermore,we deployed pressure sensors to distinguish among tiny particles,various physiological signals of the human body,space arrays,robot motion monitoring,and other related applications to demonstrate their feasibility for a variety of health and motion monitoring use cases.

关键词： Flexible pressure sensor MXene Bioinspired Physiological signals Interlayer spacing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

PDOL-Based Solid Electrolyte Toward Practical Application:Opportunities and Challenges

引用

Nano-Micro Letters 2024年第7期16卷 109-141页

作者： Hua Yang Maoxiang Jing Li Wang Hong Xu Xiaohong Yan Xiangming He institute for Advanced materials School of Materials Science and EngineeringJiangsu UniversityZhenjiang 212013People’s Republic of China institute of Nuclear and New Energy Technology Tsinghua UniversityBeijing 100084People’s Republic of China

Polymer solid-state lithium batteries(SSLB)are regarded as a promising energy storage technology to meet growing demand due to their high energy density and *** conductivity,interface stability and battery assembly process are still the main challenges to hurdle the commercialization of *** the main component of SSLB,poly(1,3-dioxolane)(PDOL)-based solid polymer electrolytes polymerized in-situ are becoming a promising candidate solid elec-trolyte,for their high ion conductivity at room temperature,good battery elec-trochemical performances,and simple assembly *** review analyzes opportunities and challenges of PDOL electrolytes toward practical application for polymer *** focuses include exploring the polymerization mechanism of DOL,the performance of PDOL composite electrolytes,and the application of ***,we provide a perspective on future research directions that need to be emphasized for commercialization of PDOL-based electrolytes in *** exploration of these schemes facilitates a comprehensive and profound understanding of PDOL-based polymer electrolyte and provides new research ideas to boost them toward practical application in solid-state batteries.

关键词： Poly(1,3-dioxolane) Solid electrolyte Polymerization mechanism Composite electrolyte Practical application

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Unveiling the rolling texture variations ofα-Mg phases in a dual-phase Mg-Li alloy

引用

Journal of Magnesium and Alloys 2024年第6期12卷 2557-2568页

作者： Xiaoyan Li Luyao Jiang Fei Guo Yanlong Ma Hang Yu Qiuyu Chen Haiding Liu Dingfei Zhang College of materials Science and Engineering Chongqing University of TechnologyChongqing 400054China Chongqing materials Research institute Co. Ltd.Chongqing 400707China College of materials Science and Engineering Chongqing UniversityChongqing 400044China

LZ91 Mg-Li alloy plates with three types of initial texture were rolled by 70%reduction at both room temperature and 200℃to explore the rolling texture formation ofα-Mg *** results showed that the rolling texture is largely affected by the initial *** the samples exhibited two main texture components as RD-split double peaks texture and TD-split double peaks texture after large strain *** intensity of the two texture components was strongly influenced by the initial orientation and rolling *** twinning altered the large-split non-basal orientation to a near basal one at low rolling *** basal orientation induced by twinning is unstable,which finally transmitted to the RD-split *** strong TD-split texture formed due to slip-induced orientation transition from its initial *** competition between prismaticaand basal slip determined the intensity and tilt angle of the TD-split *** increasing the rolling temperature,the TD-split texture component was enhanced in all three *** of extension twinning behavior and the promotion of prismatic slip at elevated temperature are the main reasons for the difference in hot and cold rolling texture.

关键词： Magnesium-lithium alloys Rolling texture Extension twinning Slip competition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Phase transition of multi-component(TiZrVNb)C ceramics—Part I:Phase decomposition induced by carbon content

引用

Journal of Advanced Ceramics 2024年第5期13卷 679-688页

作者： Qingyi Kong Rao Zhang Lei Chen Sijia Huo Wenyu Lu Yujin Wang Boxin Wei Yu Zhou institute for Advanced Ceramics School of Materials Science and EngineeringHarbin Institute of TechnologyHarbin 150080China Key Laboratory of Advanced Structure‒Function Integrated materials and Green Manufacturing Technology Harbin Institute of TechnologyHarbin 150001China School of materials Science and Chemical Engineering Harbin University of Science and TechnologyHarbin 150001China National Key Laboratory of Precision Hot Processing of Metals Harbin Institute of TechnologyHarbin 150001China

Phase decomposition can effectively enhance the mechanical properties of carbide ceramics and can overcome the difficulty of enhancing the mechanical properties of single-phase multicomponent carbide *** this work,a series of nonstoichiometric(TiZrVNb)Cx ceramics were prepared by spark plasma sintering(SPS)at different *** effects of the carbon content on the phase composition,microstructure evolution,and mechanical properties were investigated in *** decomposition occurred with decreasing carbon *** different solid solutions of(Ti,V)-rich and Zr-rich phases formed from the decomposition of equimolar single-phase solid solutions,namely,the Zr-poor phase and Zr-rich phase,*** distribution of Nb element is relatively *** semicoherent interfaces between the Zr-poor phase and the Zr-rich phase can harden and strengthen effectively under the synergistic effect of grain *** with phase decomposition structures have apparent advantages compared to single-phase high-entropy *** work provides an important train of thought for the microstructure tailoring and properties optimization of multi-component carbide ceramics.

关键词： multicomponent ceramics nontoichiometry microstructure evolution phase decomposition mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：