检索结果-南通市图书馆

Flow Boiling Heat Transfer Characteristics and Delayed Dry-Out Ability of Non-Azeotropic Mixtures R245fa/R134a in Microchannels

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1174-1188页

作者： LU Yongjie LING Yongjun ZHUANG Yuan LI Chenyang OUYANG Hongsheng HAN Xiaohong Key Laboratory of Refrigeration and cryogenic Technology of Zhejiang Province Institute of Refrigeration and CryogenicsZhejiang UniversityHangzhou310007China Zhejiang Zhongguang Electrical Co. Ltd.Lishui323000China State Key Lab for Fluorine Greenhouse Gases Replacement and Control Treatment Zhejiang Research Institute of Chemical IndustryHangzhou310014China

Microchannel flow boiling heat transfer has the advantages of strong heat dissipation capacity,good temperature uniformity,and compact *** is an excellent way to thermally manage electronic devices,but when the heat flux exceeds CHF(Critical Heat Flux),the heat transfer performance deteriorates as the working fluid dries ***-azeotropic mixtures have the potential to effectively delay or avoid dry-out during the boiling process due to their temperature slide characteristics which causes the mass transfer *** understand the influence of non-azeotropic mixtures on microchannel flow boiling,using the phase-change microchannel heat sink as the research object,the experiments on the flow boiling heat transfer performance of R245fa/R134a mixtures under different working conditions were carried out,and the characteristics of flow boiling heat transfer were obtained under the different working conditions,and comparison was developed with those of pure substance *** results demonstrated that a small amount of low-boiling-point components in the high-boiling-point working fluid inhibited boiling heat transfer to some extent,and lowered the average heat transfer coefficient under the non-dryout condition slightly lower than that of the pure substance;however,it also effectively delayed the onset of local dry-out and prevented significant deterioration in thermal transfer performance under the lower mass flow rate and higher heat flux,which could enhance the heat sink's stability.

关键词： microchannel flow boiling non-azeotropic mixture heat transfer characteristics dry-out

A New Excess Free Energy Mixing Rule for Representing Vapor-Liquid Equilibria of Mixed Refrigerants

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1161-1173页

作者： YE Gongran FANG Yibo YAN Yuhao LIU Ying OUYANG Hongsheng GUO Zhikai HAN Xiaohong Key Laboratory of Refrigeration and cryogenic Technology of Zhejiang Province Institute of Refrigeration and CryogenicsZhejiang UniversityHangzhou310027China State Key Lab for Fluorine Greenhouse Gases Replacement and Control Treatment Zhejiang Research Institute of Chemical IndustryHangzhou310014China Zhejiang Key Laboratory of Clean Energy and Carbon Neutrality Zhejiang UniversityHangzhou310027China

A suitable mixing rule is important for vapor liquid equilibrium(VLE)investigations for mixed *** this work,a new excess free energy mixing rule(MRv)was proposed at zero pressure based on the linear relationship between dimensionless parameter 1/(u-1)and *** mixing rule was explicit adopted variable liquid molar *** applicable temperature range of MRv could be extended by means of an empirical method to estimate the liquid molar volume for components at high *** mixing rules modified Huron-Vidal mixing rule(MHV1),Wong-Sandler mixing rule(WS),and MRv at two reference pressures were used to compare the VLE data in the calculation of 37 mixed *** demonstrated that MRv had a relatively similar accuracy to MHV1 and WS for component and pressure ***,the average excess Gibbs free energy using the MRv mixing rule for the 37 selected mixed refrigerants(0.0013)was much lower than those using the MHV1(0.0078)and WS(0.0809)mixing rules,which was very valuable for the design and optimization of thermodynamic systems using mixed refrigerants.

关键词： mixed refrigerant vapor liquid equilibrium(VLE) mixing rule reproducibility

Experimental investigation of inflow-outflow asymmetry in induced-charge electro-osmosis

在线全文

学校读者我要写书评

暂无评论

Energy Storage and Saving 2024年第1期3卷 16-22页

作者： Lingqi Zhao Tianwei Lai Yingke Gao Shaohang Yan Mingzhe Liu Yu Hou State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049China MOE Key Laboratory of cryogenic Technology and Equipment Xi’an Jiaotong UniversityXi’an710049China

Induced-charge electro-osmosis(ICEO)is a research hotspot in bioengineering and analytical ***-outflow asymmetry of ICEO was reported in the existing literatures,but systematic study on this phenomenon is *** this experimental study,we found that in strong electric fields,not only the velocity magnitude but also the vortex positions of ICEO are asymmetrical along the inflow and outflow directions because of the pronounced non-uniform surface electrokinetic *** the inflow and outflow directions,the amplitudes of velocities are unequal,ICEO maximum velocity positions change depending on the electric field intensity and sodium chloride(NaCl)***,the distances between vortex centers are *** NaCl solution concentration of 0.001 mol⋅L^(-1),the outflow velocity almost *** asymmetry rises with the increasing electric field *** new discoveries can direct the application of microscale devices.

关键词： Induced-charge electro-osmosis Micro-particle image velocimetry Inflow-outflow asymmetry

Microstructure and properties of coarse-grained WC-10Co cemented carbides with different carbon contents during heat treatments

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1786-1792页

作者： Yuan-Feng Xie Xing-Cheng Xie Zhong-Wu Li Rui-Jun Cao Zhong-Kun Lin Qing Li Chen-Guang Lin Powder Metallurgy and Special Materials research Department General Research Institute for Nonferrous MetalsBeijing100088China

The effects of cryogenic treatment(CT)and tempering-cryogenic treatment(TCT)on the microstructure and properties of coarse-grained WC-10Co cemented carbides with different carbon contents were *** binder phase,WC mean grain sizes,W solubility in the binder,relative magnetic s aturation,densities,hardness,wear resistance and second phase precipitation of cemented carbides with different heat treatments were *** results show that there are significant changes of microstructure and properties in the samples with CT and TCT,especially due to the precipitation of metastable nanoparticles W_(x)Co_(y)C_(z) in the binder during the heat treatments of CT and *** the simultaneous combination of microstructure and nanoparticle-reinforced binder,a dramatically improved combination of hardness and wear resistance of the samples after TCT has been achieved.

关键词： cryogenic treatment Tempering Coarsegrained cemented carbide Carbon content Nanoparticlereinforced binder

Achieving strength–ductility synergy in novel paramagnetic Fe-based medium-entropy alloys through deep cryogenic deformation

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4493-4507页

作者： Hu-Wen Ma Yan-Chun Zhao Li Feng Tian-Zeng Liu Zhi-Qi Yu Bo Jin Wang-Chun Duan Peter K.Liaw Dong Ma State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals Lanzhou University of Technology Wenzhou Pump and Valve Engineering research Institute Lanzhou University of Technology Iron and Steel research Institute Jiuquan Iron and Steel Corporation Lanzhou Resources and Environment Voc-Tech University Department of Materials Science and Engineering The University of Tennessee Neutron Science center Songshan Lake Materials Laboratory

cryogenic pre-deformation treatment has been widely used to effectively improve the comprehensive mechanical properties of steels and novel metals. However,the dislocation evolution and phase transformation induced by different degrees of deep cryogenic deformation are not yet fully elucidated. In this study, the effects of multiple cryogenic pre-treatments on the mechanical properties and deformation mechanisms of a paramagnetic Fe63.3Mn14-Si9.1Cr9.8C3.8medium-entropy alloy（MEA） were investigated, leading to the discovery of a pretreated MEA that exhibits exceptional mechanical properties, including a fracture strength of 3.0 GPa, plastic strain of 26.1% and work-hardening index of 0.57. In addition, X-ray diffraction（XRD） and transmission electron microscopy（TEM）analyses revealed that multiple cryogenic pre-deformation treatments significantly increased the dislocation density of the MEA(from 9 × 1015to 4 × 1016m-2after three pretreatments), along with a transition in the dislocation type from predominantly edge dislocations to mixed dislocations（including screw-and edge-type dislocations）. Notably, this pretreated MEA retained its paramagnetic properties（μrcryogenic pretreatment can significantly reduce the stacking fault energy of the MEA by a factor of approximately four(i.e., from 9.7 to2.6 m J·m-2), thereby activating the synergistic effects of transformation-induced plasticity, twinning-induced plasticity and dislocation strengthening mechanisms. These synergistic effects lead to simultaneous strength and ductility enhancement of the MEA.

关键词： Deep cryogenic transformation Dislocation evolution Iron-based medium-entropy alloys Phase transformation Stacking fault energy

Engineering hyaluronic acid-based nanoassemblies for monoclonal antibody delivery-design,characterization,and biological insights

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第10期17卷 9111-9125页

作者： Ana M.López-Estévez Y.Zhang María Medel Iker Arriaga Lucía Sanjurjo Cristian Huck-Iriart Nicola G.A.Abrescia María J.Vicent Defang Ouyang Dolores Torres María José Alonso center for research in Molecular Medicine and Chronic Diseases(CiMUS) University of Santiago de CompostelaSantiago de Compostela 15782Spain Department of Pharmacology Pharmacy and Pharmaceutical TechnologySchool of PharmacyUniversity of Santiago de CompostelaSantiago de Compostela 15782Spain Health research Institute of Santiago de Compostela(IDIS) Santiago de Compostela 15782Spain State Key Laboratory of Quality research in Chinese Medicine Institute of Chinese Medical Sciences(ICMS)University of MacaoMacao 999078China Polymer Therapeutics Laboratory and CIBERONC Prince Felipe research Centre Valencia E-46012Spain Structure and Cell Biology of Viruses Lab CIC bioGUNEBasque Research and Technology Alliance(BRTA)Derio 48160Spain ALBA Synchrotron Light Source Experiments DivisionCerdanyola del VallèsBarcelona 08290Spain IKERBASQUE Basque Foundation for ScienceBilbao 48009Spain

The current spotlight of cancer therapeutics is shifting towards personalized medicine with the widespread use of monoclonal antibodies(mAbs).Despite their increasing potential,mAbs have an intrinsic limitation related to their inability to cross cell membranes and reach intracellular *** offers promising solutions to overcome this limitation,however,formulation challenges *** challenges are the limited loading capacity(often insufficient to achieve clinical dosing),the complex formulation methods,and the insufficient characterization of mAb-loaded ***,we present a new nanocarrier consisting of hyaluronic acid-based nanoassemblies(HANAs)specifically designed to entrap mAbs with a high efficiency and an outstanding loading capacity(50%,w/w).HANAs composed by an mAb,modified HA and phosphatidylcholine(PC)resulted in sizes of~100 nm and neutral surface *** modeling identified the principal factors governing the high affinity of mAbs with the amphiphilic HA and *** composition and structural configuration were analyzed using the orthogonal techniques cryogenic transmission electron microscopy(cryo-TEM),asymmetrical flow field-flow fractionation(AF4),and small-angle X-ray scattering(SAXS).These techniques provided evidence of the formation of core-shell nanostructures comprising an aqueous core surrounded by a bilayer consisting of phospholipids and amphiphilic *** vitro experiments in cancer cell lines and macrophages confirmed HANAs’low toxicity and ability to transport mAbs to the intracellular *** reproducibility of this assembling process at industrial-scale batch sizes and the long-term stability was *** conclusion,these results underscore the suitability of HANAs technology to load and deliver biologicals,which holds promise for future clinical translation.

关键词： monoclonal antibody nanoparticles hyaluronic acid characterization particle size computational modeling

Break of thermal equilibrium between optical and acoustic phonon branches of CsPbI_(3)under continuous-wave light excitation and cryogenic temperature

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第7期35卷 534-537页

作者： Rongliang Deng Yihang Chen Xiaotong Fan Guolong Chen Shuli Wang Changzhi Yu Xiao Yang Tingzhu Wu Zhong Chen Yue Lin Department of Electronic Science Fujian Engineering Research Center for Solid-State LightingXiamen UniversityXiamen 361005China Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province(IKKEM) Xiamen 361102China Institute of Electromagnetics and Acoustics School of Electronic Science and EngineeringXiamen UniversityXiamen 361005China

The kinetic of low-temperature carrier and lattice of lead-halide perovskite is yet to be fully *** this work,we investigate the steady-state photoluminescences(PLs)of CsPbI_(3)at the environmental temperature(Te)ranging from 20 K to 300 K,and observed anomalous behaviors at cryogenic temperatures:The carrier temperature(Tc)of pure CsPbI_(3)exhibits a negative correlation with Te,accompanied by an expansion in Urbach tails of absorption spectra(Abs.)and excessive red-shifts at peak energy of *** phenomena are also observed in those samples containing a certain amount of Cs_(4)PbI_(6),but to a lesser extent and occurs at lower *** is attributed to the intensified hot phonon bottleneck effect(HPB)in CsPbI_(3)at cryogenic Te,which hinders the energy transfer from hot carriers,via longitudinal optics(LO)phonons to longitudinal acoustic(LA)phonons,to the *** samples under continuous-wave laser excitation,in specific,the barrier induced by the enhanced HPB at low Teprevents the effective thermalization among carriers,LO and LA phonons,which,therefore,form thermally isolated ensembles with different *** cryogenic Terange,the elevated temperatures of carrier and LO phonon expand the high-energy side of PLs and the low-energy tail of Abs.,*** those samples in which the CsPbI_(3)is mixed with Cs_(4)PbI_(6),the interfacial LO-LO interaction across them provides a bypass for heat dissipation,mitigating the heat accumulation in LO-phonons of CsPbI_(3).The results suggest that a strong HPB effect may break the thermal equilibrium among different branches of phonons in the lattice under certain extreme conditions.

关键词： CsPbI_(3) Cs_(4)PbI_(6) Low-temperature carrier Lattice kinetic Hot phonon bottleneck effect Interfacial LO-LO interaction

Metal hydride work pair development and its application on automobile air conditioning systems

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2007年第2期8卷 197-204页

作者： QIN Feng CHEN Jiang-ping ZHANG Wen-feng CHEN Zhi-jiu Institute of Refrigeration and cryogenic Engineering Shanghai Jiao Tong University Shanghai 200030 China research center Zhejiang Yinlun Machinery Co. Ltd. Tiantai 317200 China

Aiming at developing exhaust gas driving automobile air conditioning systems, a hydride pair LaNi4.61Mn0.26A10.13/ La0.6Y0.4Ni4.8Mn0.2 was developed working at 393-473 K/293-323 K/263-273 K. Property tests showed that both alloys have flat plateau slopes and small hystereses; system theoretical coefficient of performance （COP） is 0.711. Based on this work pair, a function proving automobile metal hydride refrigeration system was constructed. The equivalent thermal conductivities of the activated reaction beds were merely 1.1-1.6 W/（m-K）, which had not met practical requirement. Intermittent refrigeration cycles were achieved and the average cooling power was 84.6 W at 423 K/303 K/273 K with COP being 0.26. By altering cycling parameters, experiment data showed that cooling power and system COP increase with the growth of heat source temperature as well as pre-heating and regeneration time while decrease with heat sink temperature increment. This study confirms the feasibility of automobile metal hydride refrigeration systems, while heat transfer properties of reaction beds still need to be improved for better performance.

关键词： Metal hydride Air conditioning Reaction bed Automobile Coefficient of performance (COP)

Exploring the ultrahigh rolling contact fatigue life of M50 bearing steel by adjusting the cryogenic sequence

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 243-250页

作者： Xin Cai Xiaoqiang Hu Xingyu Lu Hongwei Liu Yanfei Cao Dianzhong Li Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China

The influence of different cryogenic sequences on the rolling contact fatigue(RCF)life of M50-bearing steel has been *** results show that direct cryogenic treatment after quenching can effectively improve RCF *** L_(10)life is strikingly 5 times longer than that with cryogenic treatment after *** is caused by the distinct lattice construction of martensite and the transformation of retained *** secondary nanocarbides and fine twins are formed via cryogenic treatment before tem-pering compared with cryogenic treatment after *** improvement in the RCF life of the steel is attributed to the joint effects of the secondary nanocarbides and twin boundaries with a width of 5-13 nm,which delays significantly crack initiation and *** study highlights a common method to improve the service life of high-carbon and high-alloy steels by adjusting the cryogenic se-quence.

关键词： M50 steel cryogenic treatment Rolling contact fatigue life Carbide Twin