检索结果-南通市图书馆

Chinese Journal of Aeronautics 2024年第2期37卷 471-481页

作者： Li WANG Jiang LI Kang LI Yiwei WANG Chenyang MA science and technology on combustion Internal Flow and Thermal-Structure LaboratoryNorthwestern Polytechnical UniversityXi’an 710072China

Carbon Nanotubes(CNTs)reinforced Polymer-Matrix Composites(PMCs)is widely used as insulation materials in thermal protection system of aerospace ***,CNTs are prone to oxidation and have high thermal conductivities,which makes it difficult to improve the ablation resistance of insulation materials that contain ***_(2)was encapsulated onto the surface of CNTs(CNTs@SiO_(2)),which were then added to Ethylene Propylene Diene Monomer(EPDM)rubber to prepare the insulation *** analysis and ablation test were used to evaluate the resistance of the insulation materials to thermal oxidation and ***,scanning electron microscopy was performed to analyze their *** revealed that the addition of CNTs@SiO_(2)could visibly reduce the effects of hot corrosion and ablation on insulation *** C-CNTs@SiO_(2)-1 formulation had the best ablative ***,compared with the unencapsulated formulation(C-CNTs-10),the C-CNTs@SiO_(2)-1 formulation reduced the line ablation rate by 51%to 0.0130 mm/s after oxygen-acetylene ***,the ablation mechanism was investigated based on the effects of the CNTs@SiO_(2)additive on their ***,the improvement in ablation performance may be attributed to CNTs@SiO_(2)-induced decreases in thermal conductivity,improvement in the hot corrosion resistance in the char layer,and changes in the microstructure.

关键词： Polymer-Matrix Composites(PMCs) Carbon Nanotubes(CNTs) Thermal properties Ablation Oxidation

The regulation of ferrocene-based catalysts on heat transfer in highpressure combustion of ammonium perchlorate/hydroxyl-terminated polybutadiene/aluminum composite propellants

在线全文

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第5期35卷 174-186页

作者： Jinchao Han Songqi Hu Linlin Liu science and technology on combustion Internal Flow and Thermo-Structure LaboratoryNorthwestern Polytechnical UniversityXi'an 710072ShaanxiChina

The regulation of the burning rate pressure exponent for the ammonium perchlorate/hydroxylterminated polybutadiene/aluminum(AP/HTPB/Al)composite propellants under high pressures is a crucial step for its application in high-pressure solid rocket *** this work,the combustion characteristics of AP/HTPB/Al composite propellants containing ferrocene-based catalysts were investigated,including the burning rate,thermal behavior,the local heat transfer,and temperature profile in the range of 7-28 *** results showed that the exponent breaks were still observed in the propellants after the addition of positive catalysts(Ce-Fc-MOF),the burning rate inhibitor((Ferrocenylmethyl)trimethylammonium bromide,Fc Br)and the mixture of Fc Br/catocene(GFP).However,the characteristic pressure has increased,and the exponent decreased from 1.14 to 0.66,0.55,and 0.48 when the addition of Ce-FcMOF,Fc Br and Fc Br/GFP in the *** addition,the temperature in the first decomposition stage was increased by 7.50℃ and 11.40℃ for the AP/Fc Br mixture and the AP/Fc Br/GFP mixture,respectively,compared to the pure *** the other hand,the temperature in the second decomposition stage decreased by 48.30℃ and 81.70℃ for AP/Fc Br and AP/Fc Br/GFP mixtures,*** was also found that Fc Br might generate ammonia to cover the AP *** this case,a reaction between the methyl in Fc Br and perchloric acid caused more ammonia to appear at the AP surface,resulting in the suppression of ammonia *** addition,the coarse AP particles on the quenched surface were of a concave shape relative to the binder matrix under low and high pressures when the catalysts were *** the process,the decline at the AP/HTPB interface was only exhibited in the propellant with the addition of *** ratio of the gas-phase temperature gradient of the propellants containing catalysts was reduced significantly below and above the characteristic pressure,rather than 3.6 times of the di

关键词： AP/HTPB/Al propellants Heat transfer High-pressure combustion Ferrocene-based catalysts Pressure exponent

Increasing operational stability of journal bearing in hydraulic suspension micro-pump by herringbone grooved structure

在线全文

学校读者我要写书评

暂无评论

science China(Technological sciences) 2024年第3期67卷 853-862页

作者： HONG Tao XING GuanYing ZUO HuaiYu XUE Song LUO XiaoBing State Key Laboratory of Coal combustion School of Energy and Power EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The operational stability of radial journal bearings is the bottleneck that limits the reliability of hydraulic suspension micropump. Due to self-excited vibrations, the whirl amplitude of the plain journal bearing(PJB) is large at high rotational speeds,which will accelerate wear failure. It has been proven that employing herringbone grooved journal bearing(HGJB) is an effective method to reduce the whirl amplitude and improve operational stability. However, enhancing the stability of journal bearings in micro-pumps by herringbone grooved structures has rarely been studied, and its effect needs to be verified. We validated the mechanism of the stability improvement with the CFD method and compared the dynamic characteristics of HGJB and PJB by rotor dynamics evaluation and experiment. The experimental results show that under the same conditions the whirl amplitude of the HGJB decreases by 29.61% in the x direction and by 24.09% in the y direction compared with that of the PJB. This study reveals the effect of the herringbone grooved structure on the operational stability of bearings and may provide guidance for the reliability improvement of hydraulic suspension micro-pump.

关键词： journal bearing herringbone groove hydrodynamic effect micro-pump

Atom substitution of the solid-state electrolyte Li_(10)GeP_(2)S_(12)for stabilized all-solid-state lithium metal batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 28-38,I0002页

作者： Zijing Wan Xiaozhen Chen Ziqi Zhou Xiaoliang Zhong Xiaobing Luo Dongwei Xu State Key Laboratory of Coal combustion School of Energy and Power EngineeringHuazhong University of Science and TechnologyWuhan 430074HubeiChina

Solid-state electrolyte Li_(10)GeP_(2)S_(12)(LGPS)has a high lithium ion conductivity of 12 mS cm^(-1)at room temperature,but its inferior chemical stability against lithium metal anode impedes its practical *** all solutions,Ge atom substitution of the solid-state electrolyte LGPS stands out as the most promising solution to this interface problem.A systematic screening framework for Ge atom substitution including ionic conductivity,thermodynamic stability,electronic and mechanical properties is utilized to solve *** fast screening,an enhanced model Dop Net FC using chemical formulas for the dataset is adopted to predict ionic ***,Li_(10)SrP_(2)S_(12)(LSrPS)is screened out,which has high lithium ion conductivity(12.58 mS cm^(-1)).In addition,an enhanced migration of lithium ion across the LSr PS/Li interface is ***,compared to the LGPS/Li interface,LSrPS/Li interface exhibits a larger Schottky barrier(0.134 eV),smaller electron transfer region(3.103?),and enhanced ability to block additional electrons,all of which contribute to the stabilized *** applied theoretical atom substitution screening framework with the aid of machine learning can be extended to rapid determination of modified specific material schemes.

关键词： Atom substitution Solid-state electrolyte Machine learning Stabilized interface

Theoretical study on the effective thermal conductivity of silica aerogels based on a cross-aligned and cubic pore model

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第6期33卷 28-36页

作者：郑坤灿李震东曹豫通刘犇胡君磊 School of Energy and Environment Inner Mongolia University of Science and TechnologyBaotou 014010China Inner Mongolia Key Laboratory of Efficient and Clean combustion Baotou 014010China

Aerogel nanoporous materials possess high porosity, high specific surface area, and extremely low density due to their unique nanoscale network structure. Moreover, their effective thermal conductivity is very low, making them a new type of lightweight and highly efficient nanoscale super-insulating material. However, prediction of their effective thermal conductivity is challenging due to their uneven pore size distribution. To investigate the internal heat transfer mechanism of aerogel nanoporous materials, this study constructed a cross-aligned and cubic pore model(CACPM) based on the actual pore arrangement of SiO_(2) aerogel. Based on the established CACPM, the effective thermal conductivity expression for the aerogel was derived by simultaneously considering gas-phase heat conduction, solid-phase heat conduction, and radiative heat transfer. The derived expression was then compared with available experimental data and the Wei structure model. The results indicate that, according to the model established in this study for the derived thermal conductivity formula of silica aerogel, for powdery silica aerogel under the conditions of T = 298 K, a_(2)= 0.85, D_(1)= 90 μm, ρ = 128 kg/m^(3), within the pressure range of 0–10^(5)Pa, the average deviation between the calculated values and experimental values is 10.51%. In the pressure range of 10^(3)–10^(4)Pa, the deviation between calculated values and experimental values is within 4%. Under these conditions, the model has certain reference value in engineering verification. This study also makes a certain contribution to the research of aerogel thermal conductivity heat transfer models and calculation formulae.

关键词： silica aerogel effective thermal conductivity two pore-size structure model porous medium heat transfer

Effects of dimethyl ether and ethanol additions on soot transition in ethylene counterflow diffusion flames

在线全文

学校读者我要写书评

暂无评论

science China(Technological sciences) 2024年第4期67卷 1094-1112页

作者： GUO LinGe YING YaoYao CHEN Chen ZHAO Xuan LIU Dong MIIT Key Laboratory of Thermal Control of Electronic Equipment School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China Advanced combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China

This paper investigates the effect of blending dimethyl ether(DME)and ethanol on the soot transition periods in ethylene counterflow diffusion flames by using a novel optical diagnostic *** soot critical transition point in different conditions is identified experimentally and *** kinds of flames are carried out to gain the soot critical transition point in counterflow diffusion flames by changing oxygen fraction(Xo)and changing volume flow rates of fuel and oxidizer(Qv).The red-green-blue(RGB)ratio method is used to precisely identify the soot critical transition point,and chemical kinetic simulations are performed to analyze the detailed reaction *** results show that compared to the ethylene flame,the soot critical transition point occurs at a higher Xoand a lower Qvwhen DME or ethanol is *** addition of DME and ethanol can inhibit soot formation,due to the degree of soot formation reaction being lower than the degree of the oxidation reaction in the blending flames.

关键词： optical diagnosis sooting tendency counterflow diffusion flame dimethyl ether ethanol

Sensitivity analysis of modeling parameters to soot and PAHs prediction in ethylene inverse diffusion flame

在线全文

学校读者我要写书评

暂无评论

science China(Technological sciences) 2024年第2期67卷 486-498页

作者： WU BingKun LI TianJiao LIU Dong MIIT Key Laboratory of Thermal Control of Electronic Equipment School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China Advanced combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and Technology Nanjing 210094China

The soot formation model based on inverse ethylene diffusion flames was performed to study the sensitivity of the soot formation process to the prediction *** effects of efficiency parameters such as soot inception,surface growth and coagulation on the simulation results were studied by using the adjustable efficiency *** addition,the reversible soot model and conjugate heat transfer(CHT)model were also introduced to explore their *** indicated that,among adjustable efficiency parameters,the nucleation efficiency had the greatest influence on the predicted soot and PAHs distributions,while the Habstraction-C2H2-addition(HACA)process and PAH adsorption surface growth efficiencies impacted *** adjustable efficiency parameters had a significant effect on the concentration of soot gaseous precursors and soot particles,but their effects on temperature,gas phase molecules,and intermediate species were not *** the nucleation efficiency increased from 2×10^(-6)to 1×10^(-4),the predicted value of the integrated soot was increased by nearly 50%,and the maximum primary particle number density and the number of aggregates were increased by an order of *** maximum concentration of BAPYR was ***,the peak temperature along the axial direction increased by only 3.5 *** the reversible soot model,the approximation results of the adjustable efficiency parameters could be modified,which showed the feasibility of the *** use of the CHT model promoted pyrolysis of the fuel below the outlet of the fuel tube,with high-temperature zones,soot zones,and PAHs zones moving towards higher flame ***,when using the reversible model and the CHT model,the maximum soot volume fraction decreased by 39%compared with the basic efficiency parameters,while the concentration of BAPYR increased by 162%,and the concentrations of gas phase species were decreased.

关键词： inverse diffusion flames soot formation soot model ethylene

combustion characteristics of millimeter-sized aluminum particles in fluidized bed under various O_(2)/CO_(2)/H_(2)O atmospheres Author links open overlay panel

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 315-322页

作者： Jialing Zhou Rui Zhang Dong Liu Key Laboratory of Thermal Control of Electronic Equipment Ministry of Industry and Information TechnologyNanjing210094China Advanced combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing210094China

Aluminum is an attractive alternative fuel,but it burns very inefficiently due to the formation of a dense Al_(2)O_(3)layer which prevents O_(2)from diffusion to the surface of Al *** previous experiments,the combustion of millimeter-sized Al(mAl)particles in the fluidized bed has achieved a substantial increase in the combustion efficiency,but further improvements are still *** this study,the effects of reaction atmosphere on the fluidized combustion of mAl particles were *** experiments with different O_(2)/H_(2)O/CO_(2)concentrations were *** experimental results indicate that the combustion efficiency of mAl particles in fluidized bed increases as the mole fraction of O_(2),H_(2)O or CO_(2)increases,and the highest combustion efficiency can reach 38.7%.After the analysis of the oxide film on the surface of aluminum particles,it was found that it is easier to generate the unstableθ-Al_(2)O_(3)under CO_(2)atmosphere,and it is easier to generate the unstableγ-Al_(2)O_(3)andθ-Al_(2)O_(3)under H_(2)O *** unstable Al_(2)O_(3)film is more likely to be abraded in the fluidized bed,which leads to the effective improvement of the combustion efficiency.

关键词： Al combustion Fluidized bed Atmosphere combustion efficiency

Coupled interactive effects of ammonia and hydrogen additions on ethylene diffusion flames: A detailed kinetic study

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

science China(Technological sciences) 2024年第3期67卷 930-948页

作者： XIAO JiaYi XU TingTing SHU ZhiMei DENG QiGe ZHAO Xuan YING YaoYao LI TianJiao LIU Dong MIIT Key Laboratory of Thermal Control of Electronic Equipment School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China Advanced combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing210094China

In order to create effective combustion technologies and fuels with low or no carbon emissions,the research was conducted to assess the coupled interactive effects of NH_(3) and H_(2) additions on ethylene counterflow diffusion flames from a kinetic *** effects of the NH_(3)/H_(2) combination on flame temperatures,major species,key radicals,important intermediate species,representative oxygenated species and NO_xwere *** results of the study utilizing fictitious inert NH_(3) and/or H_(2) revealed the chemical effects of the two *** was found that the NH_(3)/H_(2) coupled effects had a more effective inhibitory effect on soot precursors than the effects of corresponding sum of single NH_(3) or H_(2) *** production of soot precursors was promoted by the coupled chemical effects of NH_(3) and H_(2),but the coupled dilution and thermal effects were observed to have a greater impact,resulting in a decrease of the mole fractions of soot *** for the interaction of NH_(3) and H_(2) effects,the presence of H_(2) decreased the chemical effects of NH_(3) on the augmentation of C_(2)H_(2),A1,A2,and CH_(3)CHO mole *** NH_(3) addition alleviated the H_(2) chemical effects on increasing C_(2)H_(2),C_(3)H_(3),A1 and A2 ***,the NH_(3)chemical effects on C_(3)H_(3),OH and CH_(3)CHO were enhanced when H_(2) was *** presence of NH_(3) augmented the chemical effects of H_(2) on the growth of OH mole ***,the H_(2) chemical effects hindered the production of NO and NO_(2) in the presence of NH_(3).

关键词： NH_(3)/H_(2)addition kinetic analysis coupled interactive effects chemical effects

Fabrication and characterization of multi-scale coated boron powders with improved combustion performance:A brief review

在线全文

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第1期31卷 27-40页

作者： Rui Liu Danfeng Yang Kunyu Xiong Ying-Lei Wang Qi-Long Yan science and technology on combustion Internal Flow and Thermo-structure LaboratoryNorthwestern Polytechnical UniversityXi'an710072China Xi'an Modern Chemistry Research Institute Xi'an710065China

Boron has high mass and volume calorific values,but it is difficult to ignite and has low combustion *** literature review summarizes the strategies that are used to solve the above-mentioned problems,which include coatings of boron by using fluoride compounds,energetic composites,metal fuels,and metal *** techniques include recrystallization,dual-solvent,phase transfer,electrospinning,*** one of the effective coating agents,the fluorine compounds can react with the oxide shell of boron *** comparison,the energetic composites can effectively improve the flame temperature of boron powder and enhance the evaporation efficiency of oxide film as a condensed *** and metal oxides would react with boron powder to form metal borides with a lower ignition point,which could reduce its ignition temperature.

关键词： Boron powder coating Structure and morphology Condensed phase thermal reaction Ignition and combustion