检索结果-南通市图书馆

Isobaric enzymatic assays reveal depth-dependent variation in microbial ectoenzyme activities in the deepest ocean on Earth

引用

Science China Earth Sciences 2025年第1期68卷 185-194页

作者： Junwei CAO Jiahua WANG Hongge ZHANG Junhao DENG Binbin PAN Jiawang CHEN Li ZHANG Jiasong FANG college of oceanography and Ecological Science Shanghai Ocean University ocean college Zhejiang University Laboratory for Marine Biology and Biotechnology Qingdao National Laboratory for Marine Science and Technology

Microbial ectoenzymes play essential roles in the transformation and mineralization of organic matter in the ***, conventional methods for measuring microbial ectoenzyme activities(MEAs) in the deep ocean under atmospheric conditions can misrepresent the metabolic activities of indigenous microbial communities. To overcome this limitation, we measured the activities of three microbial ectoenzymes(aminopeptidase, α-glucosidase, and β-glucosidase) under both atmospheric and in situ pressure conditions in seawater collected using pressure-retaining and non-pressure-retaining samplers in the Challenger Deep, Mariana Trench. In the case of aminopeptidase and α-glucosidase, the highest isobaric MEAs were observed in the surface layer(50 m), followed by those at abyssopelagic depths(4,000–6,000 m) for aminopeptidase, hadal realm(10,903 m)for α-glucosidase, while β-glucosidase activity exhibited the highest value at 10,903 m. Furthermore, the isobaric MEAs in hadal waters were commonly found to be higher than the decompressed counterparts, highlighting the importance of pressure-retaining sampling and isobaric enzymatic assays. The half-saturation constant(Km) showed a general decreasing trend with depth,suggesting that the deep ocean microbes might have adapted to the high-pressure and oligotrophic environment by increasing their ectoenzyme's affinity to substrate. Furthermore, particle-free MEAs contribute more to the total MEAs in the deep ocean than particle-associated MEAs, suggesting the significance of cell-associated and dissolved ectoenzymes in ocean *** study provides a foundation for future investigations of MEAs in the ocean and has important implications for understanding the dynamics of microbially mediated biogeochemical cycling in marine ecosystems.

关键词： Pressure-retaining sampling Microbial ectoenzyme activity Deep-sea microbes High pressure Mariana Trench

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

“One stone, two birds”: Salt template enabling porosity engineering and single metal atom coordinating toward high-performance zinc-ion capacitors

引用

Journal of Energy Chemistry 2025年第1期100卷 637-645页

作者： Chunliu Zhu Huanyu Liang Ping Li Chenglong Qiu Jingyi Wu Jingwei Chen Weiqian Tian Yue Zhu Zhi Li Huanlei Wang School of Materials Science and engineering Ocean University of China Department of Chemical and Materials engineering University of Alberta

Zinc-ion hybrid capacitors （ZIHCs） have received increasing attention as energy storage devices owing to their low cost,high safety,and environmental ***,their progress has been hampered by low energy and power density,as well as unsatisfactory long-cycle stability,mainly due to the lack of suitable electrode *** this context,we have developed manganese single atoms implanted in nitrogen-doped porous carbon nanosheets （MnSAs/NCNs） using a metal salt template method as cathodes for *** metal salt serves a dual purpose in the synthesis process:It facilitates the uniform dispersion of Mn atoms within the carbon matrix and acts as an activating agent to create the porous *** applied in ZIHCs,the MnSAs/NCNs electrode demonstrates exceptional performance,including a high capacity of 203 m Ah g-1,an energy density of 138 Wh kg-1at 68 W kg-1,and excellent cycle stability with 91%retention over 10,000 *** calculations indicate that the introduced Mn atoms modulate the local charge distribution of carbon materials,thereby improving the electrochemical *** work demonstrates the significant potential of carbon materials with metal atoms in zinc-ion hybrid capacitors,not only in enhancing electrochemical performance but also in providing new insights and methods for developing high-performance energy storage devices.

关键词： Zinc ion hybrid capacitors Cathodes Carbon materials Heteroatoms Single atoms

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Comparative Evaluation and Performance Analysis of Heat Exchangers Featured with Peened Surface

引用

Journal of Thermal Science 2025年第1期34卷 50-61页

作者： DINESHBABU Chinnadurai SHIVA SANKARAN Nallasamy VENKATESH RAJA Krishnan VENKATESH Rathinavelu Department of Mechanical engineering Kongunadu College of Engineering and Technology Department of Mechanical engineering Selvam College of Technology Department of Mechanical engineering Sona College of Technology Department of Mechanical engineering Saveetha School of EngineeringSaveetha Institute of Medical and Technical Sciences (SIMATS)Saveetha University

Heat exchangers have the potential for various engineering applications,and their performance is enriched by surface *** proposed system enriches the heat exchanger's performance by adapting a peened stainless steel（SS） surface blasted with copper,grinding,sand,and *** influences peened SS surface modified with a copper blast,grinding,sandblast,and iron blast on the surface morphology of shell and tube heat exchanger surface（STHE） is analyzed via tungsten heated cathode electron gun featured scanning electron microscope and observed coarse grain *** SS surface featured STHE performance is experimentally evaluated by different flow rates（30,60,90,and 120 L/min） underwater fluid medium functioned by the temperature ranges of 25-75℃ and its results are compared with computational fluid dynamic（CFD）/heat transfer research（HTRI） analyzed *** 60 L/min flow rate was spotted as an optimum value for both shell and tube side *** STHE is operated with a 60 L/min flow rate under the different peened surfaces and evaluated its Stanton number,Nusselt number,logarithmic mean temperature difference（LMTD）,overall heat transfer coefficient,number of transfer units（NTU）,effectiveness,and exergy *** iron blasted SS peened surface was observed to have better SHTE performance like Stanton number（0.0012）,Nusselt number（2180）,reduced LMTD of 31℃,improved overall heat transfer co-efficient of 2400 W/（m2·K）,better NTU of 0.5532,good effectiveness value of 0.451 62,and hiked exergy efficiency of 10% respectively.

关键词： penned surface performance analysis shell and tube heat exchanger stainless steel

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Si-C Foam Porous-Medium Combustion Power-Generation System for Low-Calorific-Value Biomass Syngas

引用

Journal of Thermal Science 2025年第1期34卷 206-222页

作者： YANG Jianwen CHEN Wei CAO Bingwei LIU Xinhui LI Hang college of Mechanical and Aerospace engineering Jilin University School of Mechanical and Vehicle engineering Changchun University

Syngas produced from the gasification of organic feedstocks from biomass is one of the clean and sustainable sources of *** advantages of simple access and renewability of biomass energy can meet the energy needs of temporary power *** study presents a biomass power-generation system for vehicular *** biomass and a free-piston Stirling engine generator（FPSEG） as the primary material and prime mover,respectively,biomass energy is converted into electricity by combusting the syngas to heat the *** and key parameter design for biomass gasification and thermoelectric conversion systems within a power generation system were performed.A porous medium area was constructed using Si-C foam ceramics to obtain an energy-conversion experimental *** effects of bed height,porosity,porous-region diameter,and air-intake conditions on the power-generation performance were investigated,and optimisations were performed for the thermoelectric conversion *** rate of increase during FPSEG power generation first increased and then decreased with increasing bed height,peaking at a bed height of 40 *** increasing porous-region diameter accelerated FPSEG power generation,whereas porosity changes in the porous media did not significantly affect the rate of change during FPSEG power *** increasing air intake,the rate of increase during power generation first increased and then *** maximum change rate and the highest thermoelectric conversion efficiency of the power-generation system occurred at 9.5 m3/h and 6.5 m3/h（～45.1%）air intakes,*** the thermal inertia and combustion structure of the thermoelectric conversion system significantly increased the power-generation rate of the system,with 1.8 W/s being observed at a 9.7 m3/h air intake.

关键词： biomass combined heat and power (CHP) gasification porous media combustion power generation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Enhanced Dairy Scum Biodiesel Blends:Unleashing the Power of Aluminium Oxide for Sustainable and Efficient Engine Performance

引用

Journal of Thermal Science 2025年第1期34卷 283-302页

作者： Veeranna MODI Prasad B.RAMPURE Sunil Kumar SHETTY Madeva NAGARAL Channa Keshava NAIK N Johar MGM Muhammad Irsyad ABDULLAH Abdullah I.AL-MANSOUR Shamshad ALAM KLE college of engineering and Technology ChikodiVisvesvaraya Technological University Nitte (Deemed to be University) NMAM Institute of Technology (NMAMIT)Department of Mechanical Engineering Aircraft Research and Design Centre HAL Department of Mechanical engineering BGS College of Engineering and TechnologyBengaluruAffiliated to Visvesvaraya Technological University Management and Science University Department of Civil engineering College of EngineeringKing Saud University

This study investigates the effect of aluminium oxide nanoparticlesaddition to biodiesel blends made from dairy milk scum on performance and combustion characteristics of the diesel *** dispersion of Al2O3nanoparticles in B20 blends at different concentrations was done with the help of *** number of blends were prepared for the *** Machine learning algorithms(Random Forest（RF）and CatBoost) was used for the *** results show that in comparison to biodiesel blends without nanoparticles,the kinematic viscosity and density is higher for fuel blends with *** these Fuel blends have higher calorific *** blends exhibited reduced Brake Specific Fuel Consumption（BSFC） of2.85% than the blends without nano particles(Dairy Scum Methyl Ester Biodiesel 20%+Neat Diesel 80%（in volume）,DSMEB20),57.14% less CO,40.8% less hydrocarbon,and increased NOxemissions compared to conventional diesel,contributing to the development of environmentally friendly and renewable biofuel blends with *** B20NP30 is the optimal blend for performance and emission *** study concludes with findings on enhanced Brake Thermal Efficiency（BTE） of 26.29% in 3×10-5（in volume） Al2O3nanoparticle-blended DSME B20 and other DSME B20 fuel blends,emphasizing the importance of optimal nanoparticle *** correlation matrix shows how engine load,efficiency measures（BTE,BSFC）,and emissions（CO,CO2,NOx,Smoke） are connected in complex *** results help us understand the complicated dynamics of engine performance and emission characteristics ***'s diagram for BTE and BSFC shows that CatBoost-based BTE models perform superior to RF-based models during the training as well as testing *** results were obtained for CO and CO2emission results.

关键词： Al2O3 concentration CI engine Dairy Scum Methyl Ester Biodiesel

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Manufacture the conducting polymer with light

引用

Science China Chemistry 2025年第1期68卷 8-9页

作者： Yang Li Tianyu Li Yan Ji Baoguang Liu college of Electronic and Optical engineering & college of Flexible Electronics (Future Technology) Nanjing University of Posts & Telecommunications

Poly(3,4-ethylenedioxythiophene) (PEDOT), heralded as the “king” of conducting polymers, is esteemed in bioelectronics for its mixed electronic and ionic conductivity, mechanical properties compatible with biological tissues, tunable healing ability and stability in diverse environments [1]. Based on additive manufacturing of three-dimensional structures,PEDOT realizes the implementation in the efficient production of flexible bioelectronics, the construction of intricate electrode-neural implantations, and the development of smart brain-computer-interfaces [2].

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A self-adaptive inorganic in-situ separator by particle crosslinking for nonflammable lithium-ion batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 469-480页

作者： Jiarui Yang Jiuzhou Liu Wenrui Cai Ziyu Zhao Shan Wang Lu He Shanshan Lv Zhiwei Zhu Zhongfeng Ji Guojiang Wen Hua Li Yuanming Zhai Xuewei Fu Wei Yang Yu Wang college of Polymer Science and engineering State Key Laboratory of Polymer Materials Engineering Sichuan University

All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional liquid-state LIBs. However, the practical success of ASLS-LIBs is bottlenecked by the lack of advanced separator technology that can simultaneously realize high performances in puncturing-tolerability,fire-resistance, and importantly, wetting-capability with non-flammable liquid-electrolytes. Here, we propose a concept of inorganic in-situ separator(IISS) by hybrid-sol physical crosslinking directly onto the electrode surface to address the above challenges. Particularly, the hybrid-sol is designed with silica nanoparticles as the building block and poly(vinylidene difluoride) nanoparticles as the crosslinking agent. The critical factors for controlling the IISS microstructures and properties have been systematically investigated. The advantages of the IISS have been confirmed by its fast wetting with various fireresistant liquid-electrolytes, customizable thickness and porous structures, robust interface with planar or three-dimensional(3D)-structured electrodes, and importantly, unexpected self-adaptability against puncturing. Enabled by the above merits, a fire-resistant ASLS-LIB is successfully assembled and demonstrated with stable electrochemical performance. This sol-crosslinked IISS may open an avenue for the studies on the next-generation separator technology, cell assembling, solid electrolyte processing as well as non-flammable secondary batteries.

关键词： Silica nanoparticles

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ru/NiMnB spherical cluster pillar for highly proficient green hydrogen electrocatalyst at high current density

引用

Journal of Energy Chemistry 2025年第1期100卷 397-408页

作者： Md Ahasan Habib Shusen Lin Mehedi Hasan Joni Sumiya Akter Dristy Rutuja Mandavkar Jae-Hun Jeong Jihoon Lee Department of Electronic engineering College of Electronics and Information Kwangwoon University

Advanced OER/HER electrocatalytic alternatives are crucial for the wide adaptation of green hydrogen ***,Ru/NiMnB spherical cluster pillar （SCP）,denoted as Ru/NiMnB,is synthesized using a combination of electro-deposition and hydrothermal *** investigation of Ru doping in the NiMnB matrix revealed significant improvements in electrocatalytic *** Ru/NiMnB SCPs demonstrate superior OER/HER activity with low overpotentials of 150 and 103 mV at 50mA/cm2in 1 M KOH,making them highly competitive with state-of-the-art ***,the Ru/NiMnB SCPs exhibit a low 2-E cell voltage of 2.80 V at ultra-high current density of 2,000 m A/cm2in 1 M KOH,outperforming the standard benchmark electrodes of RuO2||Pt/C,thereby positioning Ru/NiMnB as one of the best bifunctional *** SCPs exhibit exceptional high-current characteristics,stability and corrosion resistance,as evidenced by continuous operation at 1,000 mA/cm2high-current density for over 150 h in 6 M KOH at elevated temperatures under harsh industrial *** a small amount of Ru incorporation significantly enhances the electrocatalytic performances of NiMnB,attributed to increased active sites and improved intrinsic properties such as conductivity,adsorption/desorption capability and reaction ***,Ru/NiMnB SCPs present a promising bi-functional electrode concept for efficient green H2production.

关键词： Potassium hydroxide

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Deciphering the role of ultra-low-loaded rhodium in NiFe-MIL-53 for superior oxygen evolution reaction

引用

Journal of Energy Chemistry 2025年第1期100卷 77-86页

作者： Jinzhi Jia Jinhua Zhang Kailu Guo Lanyue Zhang Gening Du Hao You Junfeng Huang Mudong Tu Hua Li Yong Peng Wei Dou Cailing Xu State Key Laboratory of Applied Organic Chemistry College of Chemistry and Chemical Engineering School of Materials and Energy Lanzhou University college of Chemistry and Chemical engineering Luoyang Normal University

Designing highly active and stable electrocatalysts of oxygen evolution reaction （OER） is one of the crucial *** this study,a novel OER electrocatalyst,NiFe-MIL-53 modified with ultra-low rhodium（Rh@NiFe-MIL-53）,is successfully prepared via the hydrothermal ***-situ Raman spectroscopy and electrochemical impedance spectroscopy reveal that the doped Rh accelerates the phase transformation of NiFe-MIL-53 and the in-situ formed Rh@NiFeOOH is the actual active *** importantly,the enhanced reversibility of electrochemical reconstruction between NiFeOOH and NiFe（OH）2after doping Rh is beneficial for improving the electrochemical stability of the catalyst.X-ray photoelectron spectroscopy spectra show the strong electronic interaction between single-atom Rh and Ni/Fe in Rh@***,theoretical calculations confirm that the integration of single-atom Rh into the NiFeOOH successfully reduces the band gap,regulates the d-band center （εd）,accelerates the charge transfer,and optimizes the adsorption behavior of oxygen-containing intermediates,thereby lowering the energy barrier of rate-determining ***,the optimized Rh@NiFe-MIL-53 exhibits excellent OER activity （240 mV） with a small Tafel slope of 48.2 mV dec-1and long-term durability (over1270 h at 10 m A cm-2and 110 h at 200 mA cm-2).This work presents a new perspective on designing highly efficient OER electrocatalysts.

关键词： X ray photoelectron spectroscopy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

CO2-mediated bicarbonate conversion to concentrated formate in a CEM-based electrolyzer

引用

Journal of Energy Chemistry 2025年第1期100卷 605-611页

作者： Haocheng Xiong Donghuan Wu Haonan Li Andrew Li Qikun Hu Siyao Song Bingjun Xu Qi Lu State Key Laboratory of Chemical engineering Department of Chemical Engineering Tsinghua University college of Chemistry and Molecular engineering Peking University Ordos Laboratory

Renewable energy-driven bicarbonate conversion to valuable chemicals presents an attractive strategy for mitigating CO2emissions,as bicarbonate can be efficiently generated from the capture of atmospheric CO2using alkaline solutions with reactive *** this work,we present a CO2-mediated bicarbonate conversion to pure formate using a cation exchange membrane-based electrolyzer with a 25 cm2electrode *** electrolysis achieved selectivities exceeding 75%for formate at a total current of 2.5 A,achieving formate concentrations up to 1.2 M and yields as high as 95%over extended *** techno-economic assessment confirmed the economic viability of the process,highlighting the potential for bicarbonate electrolysis as a sustainable method for producing valuable chemicals.

关键词： Electrocatalysis Techno-economic assessments Electrochemistry Flow electrolyzer

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：