检索结果-南通市图书馆

Journal of environmental Sciences 2024年第4期138卷 428-438页

作者： Jing Yang Yujie Ren Shuoyu Chen Jinsuo Lu School of environmental and municipal engineering Xi’an University of Architecture and TechnologyXi’an 710055China

This study aimed to explore the chemical looping gasification(CLG)reaction characteristics of the metal-supported composite phosphogypsum(PG)oxygen carriers(OCs)and the thermodynamic mechanism.The FactSage 7.1 thermodynamic simulation was used to explore the oxygen release and H_(2)S removal mechanisms.The experimental results showed that the syngas yield of CLG with PG-CuFe_(2)O_(4)was more than that with PG-Fe_(2)O_(3)20/CuO40 or PG-Fe_(2)O_(3)30/CuO30 OC at 1023 K when the water vapor content was 0.3.Furthermore,the maximum syngas yield of the CO selectivity was 70.3% and of the CO_(2)selectivity was 23.8%.The H_(2)/CO value was 0.78,and the highest carbon conversion efficiency was 91.9% in PG-CuFe_(2)O_(4)at the gasification temperature of 1073 K.The metal-supported PG composite oxygen carrier was proved not only as an oxygen carrier to participate in the preparation of syngas but also as a catalyst to catalyze coal gasification reactions.Furthermore,both the experimental results and FactSage 7.1 thermodynamic analysis revealed that the trapping mechanism of H_(2)S by composite OCs was as follows:CuO first lost lattice oxygen as an oxygen carrier to generate Cu_(2)O,which,in turn,reacted with H_(2)S to generate Cu_(2)S.This study provided efficient guidance and reference for OC design in CLG.

关键词： Metal-supported composite phosphogypsum Reaction characteristics Thermodynamic mechanism Chemical looping gasification

Dynamic emission characteristics and control strategies of air pollutants from motor vehicles in downtown Beijing,China

在线全文

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第2期136卷 637-646页

作者： Yan Shen Tongran Wu Aiping Lian Jie Gao Fei Peng Guohua Song Xuefang Wu Yangyang Cui Xinyu Liu Yunfei Wan Jing Yan Yifeng Xue National engineering Research Center of Urban environmental Pollution Control Beijing Municipal Research Institute of Eco-Environmental ProtectionBeijing 100037China Beijing municipal Ecology and Environment Bureau Beijing 100048China Beijing Jiaotong University Beijing 100091China

This study combined the real-time monitoring and investigation of traffic flows to comprehensively analyze the road traffic flow and vehicle structure in downtown Beijing.A dynamic emission inventory of motor vehicle air pollutants in downtown Beijing in 2021 was established,and the impact of these emissions on air quality was simulated and quantified,and different emission reduction control scenarios were proposed to evaluate their environmental improvement effects and explore measures to mitigate the impact of pollution emissions.The results show that the high traffic flow and the structure of the motor vehicle emissions in downtown Beijing are the main causes of severe motor vehicle pollution.Monitoring data shows that traffic flow in central Beijing is dominated by small passenger vehicles,while the vehicle mix is better than in other regions,with 72.0%of vehicles meeting"National V"or higher emission standards.However,to achieve higher air quality goals,further reducing vehicle emissions is necessary.Based on dynamic traffic flow,the average daily emissions of nitrogen oxides(NOX),particulate matters(PM_(2.5))and volatile organic compounds(VOC)from motor vehicles in central Beijing are 17.7 tons,0.6 tons and 14.0 tons,respectively,accounting for 23.0%of the city’s average daily motor vehicle emissions.If a zero-emission zone for motor vehicles were implemented in central Beijing,the annual average emission level of pollutants will be reduced by 10.4%to 21.0%.The designation of ultra-low emission zones for motor vehicles could be effective in improving the air quality in the center of Beijing.

关键词： Motor vehicle Air pollutant Emission characteristics Control strategy Beijing

Catalytic oxidation of toluene by manganese oxides:Effect of K^(+)doping on oxygen vacancy

在线全文

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第8期142卷 43-56页

作者： Zhenzhen Huang Haiyang Li Xuejun Zhang Yanli Mao Yinghan Wu Wei Liu Hongrun Gao Mengru Zhang Zhongxian Song Faculty of environmental and municipal engineering Henan Key Laboratory of Water Pollution Control and Rehabilitation TechnologyHenan University of Urban ConstructionPingdingshan 467036China college of environmental and Safety engineering Shenyang University of Chemical TechnologyShenyang 110142China

Alkali metal potassium was beneficial to the electronic regulation and structural stability of transition metal oxides.Herein,K ions were introduced into manganese oxides by different methods to improve the degradation efficiency of toluene.The results of activity experiments indicated that KMnO_(4)-HT(HT:Hydrothermal method)exhibited outstanding low-temperature catalytic activity,and 90%conversion of toluene can be achieved at 243℃,which was 41℃and 43℃lower than that of KNO_(3)-HT and Mn-HT,respectively.The largest specific surface area was observed on KMnO_(4)-HT,facilitating the adsorption of toluene.The formation of cryptomelane structure over KMnO_(4)-HT could contribute to higher content of Mn^(3+)and lattice oxygen(Olatt),excellent low-temperature reducibility,and high oxygen mobility,which could increase the catalytic performance.Furthermore,two distinct degradation pathways were inferred.PathwayⅠ(KMnO_(4)-HT):toluene→benzyl→benzoic acid→carbonate→CO_(2)and H2O;PathwayⅡ(Mn-HT):toluene→benzyl alcohol→benzoic acid→phenol→maleic anhydride→CO_(2)and H2O.Fewer intermediates were detected on KMnO_(4)-HT,indicating its stronger oxidation capacity of toluene,which was originated from the doping of K^(+)and the interaction between K-O-Mn.More intermediates were observed on Mn-HT,which can be attributed to the weaker oxidation ability of pure Mn.The results indicated that the doping of K^(+)can improve the catalytic oxidation capacity of toluene,resulting in promoted degradation of intermediates during the oxidation of toluene.

关键词： Catalytic oxidation Preparation method Cryptomelane Mn^(3+)and lattice oxygen

Accelerating lithium-sulfur battery reaction kinetics and inducing 3D deposition of Li2S using interactions between Fe3Se4 and lithium polysulfides

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第8期95卷 540-553页

作者： Yihan Lin Liheng Li Longjie Tan Yongliang Li Xiangzhong Ren Peixin Zhang Chuanxin He Lingna Sun college of Chemistry and environmental engineering Shenzhen University

Although lithium-sulfur batteries（LSBs） exhibit high theoretical energy density,their practical application is hindered by poor conductivity of the sulfur cathode,the shuttle effect,and the irreversible deposition of Li2S.To address these issues,a novel composite,using electrospinning technology,consisting of Fe3Se4and porous nitrogen-doped carbon nanofibers was designed for the interlayer of LSBs.The porous carbon nanofiber structure facilitates the transport of ions and electrons,while the Fe3Se4material adsorbs lithium polysulfides（LiPSs） and accelerates its catalytic conversion process.Furthermore,the Fe3Se4material interacts with soluble LiPSs to generate a new polysulfide intermediate,LixFeSycomplex,which changes the electrochemical reaction pathway and facilitates the three-dimensional deposition of Li2S,enhancing the reversibility of LSBs.The designed LSB demonstrates a high specific capacity of1529.6 mA h g-1in the first cycle at 0.2 C.The rate performance is also excellent,maintaining an ultra-high specific capacity of 779.7 mA h g-1at a high rate of 8 C.This investigation explores the mechanism of the interaction between the interlayer and LiPSs,and provides a new strategy to regulate the reaction kinetics and Li2S deposition in LSBs.

关键词： Adsorption Catalysis Electrostatic spinning Interlayers Li2S electrodeposition Lithium-sulfur batteries Polysulfide intermediates

Unexpected/contrary behavior of aerosol mass concentration in response to the individual components'concentration reduction in Kitakyushu,Japan

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第1期135卷 630-639页

作者： Xi Zhang Takuya Murakami Jinhe Wang Masahide Aikawa Faculty of environmental engineering The University of Kitakyushu1-1HibikinoWakamatsuKitakyushuFukuoka 808-0135Japan Resources and Environment Innovation Research Institute School of Municipal and Environmental EngineeringShandong Jianzhu UniversityJinan 250101China

In the suburbs of Kitakyushu,Japan,the inorganic aerosol mass concentration(IAM)was about 32.7μg/m^(3),with the aerosol pH of 3.3.To study the thermodynamics of aerosol when its individual components'concentration is reduced,sensitive tests were performed using the ISORROPIAⅡmodel,in which the seven control species—TNaCl,TNH_(4)^(+),TSO_(4)^(2-),TNO_(3)^(-),TMg^(2+),TK^(+),and TCa^(2+)—were taken into account.IAM and inorganic aerosol pH after reducing TNaCl,TNO_(3)^(-),TMg^(2+),TK^(+),and TCa^(2+)responded linearly(0%≤concentration reduction ratio(CRR)≤100%,with the exception of 100%in TNaCl);the nonlinear variations of these two parameters could be observed by controlling TNH_(4)^(+)and TSO_(4)^(2-).Unexpected aerosol behavior occurred at 100%reduction of TNaCl,which was caused by the sudden increase of NO_(3)^(-),NH_(4)^(+),and aerosol liquid water content(ALWC);the increase of IAM was also observed after controlling TSO_(4)^(2-)(60%≤CRR≤100%)and TCa^(2+)(0%≤CRR≤100%),which was mainly related to the variation of ALWC driven by the response of CaSO_(4).Multiple regression analysis showed that ALWC was statistically and strongly related to the variations of NO_(3)^(-),Cl-,SO_(4)^(2-),HSO_(4)^(-),HNO_(3),and NH_(3)(P<0.05),with regression coefficients of 1.68,5.23,1.83,2.81,0.34,and 0.57,respectively.The highest coefficient(5.23)was found for Cl^(-),revealing that sea salts significantly influenced particle responses.Overall,this study comprehensively investigated aerosol characteristics and inner responses for the reduction of components,which is of great significance for a better understanding of atmospheric chemistry in Kitakyushu,Japan.

关键词： Sensitive tests Reduction Gas-particle conversion process Aerosol liquid water content Sea salts

Resistance-capacitance model of the capillary heat exchanger in subway tunnels

在线全文

学校读者我要写书评

暂无评论

Energy and Built Environment

Energy and Built Environment 2024年第1期5卷 1-8页

作者： Zhen Tong Hao Wu Yiming Guan Yongming Ji Songtao Hu School of environmental and municipal engineering Qingdao University of TechnologyQingdao 266033China

The subway operation generates a large amount of waste heat,which will lead to a disruption of the underground thermal balance.To remove the heat,a ground source heat pump system adopting capillary net as the front-end heat exchanger can be built in the tunnels to recycle the waste heat and use it for building heating.Different simulation method was used to analyze the heat transfer process in the tunnel and the surrounding rock.The existing simulation method usually takes a long time for calculation and can not be used for a real-time regulation of the system.Based on the concept of thermoelectric analogy,a resistance-capacitance(RC)model was proposed for rapid prediction and analysis on the heat transfer of the capillary net in subway tunnel.The annual thermal response in the tunnel was analyzed,and the influence of the tunnel air temperature and the capillary inlet water temperature was examined using this model.The maximum heat transfer flux of the capillary in summer(release heat)and in winter(extract heat)was 55.27 W/m 2 and 38.33 W/m 2,respectively.The effect of capillary inlet water temperature was more remarkable than that of the tunnel air temperature on the capillary heat exchange process.

关键词： Subway tunnel Heat pump Capillary heat exchanger Resistance-capacitance model

The optimization research on the coupled of active and passive energy supplying in public institutions in China

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy and Built Environment

Energy and Built Environment 2024年第2期5卷 288-299页

作者： Shui Yu Xueyan Liu Jianghui Yang Fuhong Han Jiashuai Wei School of municipal and environmental engineering Shenyang Jianzhu UniversityShenyang 110168China

The building sector is one of the largest energy user and carbon emitters globally.To increase the utilization rate of renewable energy and reduce carbon dioxide emissions,the optimal technical scheme of active public institutions and coupled utilization of renewable energy is studied.In this study,the energy consumption of three types of public institutions in various regions of China was simulated by using DeST building energy consumption software,combined with energy conversion efficiency and data released by the National Bureau of Statistics,and the total energy demand and total energy supply of public institutions were predicted using the load density method.Based on the coupling mechanism of the MARKAL model,the optimal proportion of renewable energy in the energy supply of public buildings in different regions is determined.Through the study of the number of public institutions in various regions of China,energy consumption characteristics,construction area,and other related data,the reverse energy flow method is creatively proposed,and the active and renewable energy coupling algorithm from the energy demand side of public institutions to the energy supply side is established.The results show that the central region has the highest utilization rate of renewable energy in the public sector,reaching 36.18%.The use of renewable energy in public buildings in hot summer and warm winter zones decreased to 35.08%,and it was 12.82% in cold zones.By 2025,the proportion of renewable energy resources in China is expected to reach 29.2%.The energy coupling model and algorithm constructed in this paper can provide a basis for the coupling macro configuration of renewable energy in public institutions in China.

关键词： Public institutions Energy demand Energy supply Active and renewable energy coupling ratio Energy conversion efficiency

Effects of operating conditions on iron(hydr)oxides evolution and ciprofloxacin degradation in potassium ferrate-ozone stepwise oxidation system

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第1期135卷 367-378页

作者： Xiaochen Li Yifan Wang Ning Wang Mei Li Maomao Bai Jingtao Xu Hongbo Wang School of municipal and environmental engineering Shandong Jianzhu UniversityJinan 250101China Resources and Environment Innovation Institute Shandong Jianzhu UniversityJinan 250101China

In this study,a stepwise oxidation system of potassium ferrate(K_(2)FeO_(4))combined with ozone(O+3)was used to degrade ciprofloxacin(CIP).The effects of pH and pre-oxidation time of K_(2)FeO_(4) on the evolution of K_(2)FeO_(4) reduction products(iron(hydr)oxides)and CIP degradation were investigated.It was found that in addition to its own oxidation capacity,K_(2)FeO_(4) can also influence the treatment effect of CIP by changing the catalyst content.The presence of iron(hydr)oxides effectively enhanced the mineralization rate of CIP by catalyzing ozonation.The pH value can influence the content and types of the components with catalytic ozonation effect in iron(hydr)oxides.The K_(2)FeO_(4) pre-oxidation stage can produce more iron(hydr)oxides with catalytic components for subsequent ozonation,but the evolution of iron(hydr)oxides components was influenced by O_(3) treatment.It can also avoid the waste of oxidation capacity owing to the oxidation of iron(hydr)oxides by O_(3) and free radicals.The intermediate degradation products were identified by Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR-MS).Besides,the degradation pathways were proposed.Among the degradation products of CIP,the product with broken quinolone ring structure only appeared in the stepwise oxidation system.

关键词： Potassium ferrate reduction products Catalytic ozonation Ciprofloxacin Potassium ferrate pre-oxidation time

COF-based membranes for liquid phase separation:Preparation,mechanism and perspective

在线全文

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第7期141卷 63-89页

作者： Yujie Zhao He Gu Yilun Zhou CaimeiWen Xiaolu Liu Suhua Wang Zhongshan Chen Hui Yang Xiangke Wang college of environmental Science and engineering North China Electric Power UniversityBeijing 102206China School of environmental Science and engineering Guangdong University of Petrochemical TechnologyMaoming 525000China

Covalent organic frameworks(COFs)are a new kind of crystalline porous materials composed of organic molecules connected by covalent bonds,processes the characteristics of low density,large specific surface area,adjustable pore size and structure,and easy to functionalize,which have been widely used in the field of membrane separation technology.Recently,there are more and more researches focusing on the preparation methods,separation application,and mechanism of COF membranes,which need to be further summarized and compared.In this review,we primarily summarized several conventional preparation methods,such as two-phase interfacial polymerization,in-situ growth on substrate,unidirectional diffusion method,layer-by-layer assembly method,mixed matrix membranes,and so on.The advantages and disadvantages of each method are briefly summarized.The application potential of COF membrane in liquid separation are introduced from four aspects:dyeing wastewater treatment,heavy metal removal,seawater desalination and oil-water separation.Then,the mechanisms including pore structure,hydrophilic/hydrophobic,electrostatic repulsion/attraction and Donnan effect are introduced.For the efficient removal of different kind of pollutions,researchers can select different ligands to construct membranes with specific pore size,hydrophily,salt or organic rejection ability and functional group.The ideas for the design and preparation of COF membranes are introduced.Finally,the future direction and challenges of the next generation of COF membranes in the field of separation are prospected.

关键词： Covalent organic frameworks Membrane materials Liquid phase separation Separation mechanism

FeNi Prussian blue analogues on highly graphitized carbon nanosheets as efficient glucose sensors

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第6期43卷 2730-2738页

作者： Jin-Hang Xue Qiu-Hong Sun Cheng Han Yuan-Dong Yang Shao-Jie Xu Qi-Peng Li Jin-Jie Qian college of Life and environmental Science Wenzhou University college of Chemistry and Materials engineering Wenzhou University college of Chemistry and Chemical engineering Zhaotong University

Meeting the continuous glucose monitoring requirements of individuals necessitates the research and development of sensors with high sensitivity and stability.In this study,a straightforward strategy was proposed for synthesizing ultra-thin oxygen-rich graphitized carbon nanosheets（denoted as GCS-O）.These nanosheets are obtained by calcining a topologically two-dimensional indium-based coordination polymer.Subsequently,the growth of FeNi Prussian blue analogue（PBA） on GCS-O effectively introduces active sites and increases the nitrogen content within the carbonaceous matrix.The resulting FeNi-PBA/GCS-O composite exhibits excellent glucose sensing performance with a broad linear range of 1 to 1300μmol·L-1.Meanwhile,it also achieves a high sensitivity of 2496 μA·mmol-1·L·cm-2,a limit of detection of 100nmol·L-1（S/N=3）,and commendable long-term durability.The relatively simple synthesis process,exceptional sensitivity,and satisfactory electrochemical sensing performance of FeNi-PBA/GCS-O open up new directions for biosensor applications.

关键词： Coordination polymer Carbon nanosheet Prussian blue analogue Surface reconstruction Glucose oxidation