检索结果-南通市图书馆

science China Chemistry 2024年第4期67卷 1137-1160页

作者： Hui-Min Xu Hong-Rui Zhu Chen-Jin Huang Zhi-Jie Zhang Ting-Yu Shuai Qi-Ni Zhan Gao-Ren Li college of materials science and Engineering Sichuan UniversityChengdu 610065China

Fe-nitrogen-carbon(Fe-N-C)-and Co-nitrogen-carbon(Co-N-C)-based electrocatalysts have been widely concerned because of their high OER/ORR activity,low metal cost,and simple *** exploration of Fe-N-C and Co-N-C single atombased catalysts with high activity and stability to overcome the slow kinetics of oxygen reduction and oxygen evolution reactions is also the key to the development of efficient electrolytic water,fuel cells,and rechargeable metal-air ***-N-C and Co-N-C single atom-based electrocatalysts have the advantages of a high utilization rate of metal atoms and high electrocatalytic activity,and are ideal catalysts for promoting electrochemical energy conversion and *** general principles of designing Fe-N-C and Co-N-C single atom-based electrocatalysts are reviewed in this ***,the strategies to improve the bifunctional catalytic activity and stability are ***,the challenges and prospects of Fe-N-C and Co-N-C single atom-based catalysts are well *** review will provide a reference for the directed optimization of Fe-N-C and Co-N-C single atom-based catalysts.

关键词： Fe-N-C Co-N-C single atom bifunctional oxygen electrocatalysts

Cost-effective fabrication of liquid metals via a laser induced graphene stamp for highly-stretchable integrated optoelectronics

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第8期17卷 7603-7613页

作者： Weiqi Sun Li Xiang Zebang Luo Hui Wang Dong Li Anlian Pan college of materials science and Engineering Hunan UniversityChangsha 410082China

Stretchable electronics have found widespread applications in various fields such as wearable electronics,soft robots,and *** an important promising alternative of traditional rigid conductors,liquid metals have demonstrated immense potential to provide high conductivity and stretchability for the stretchable electronic ***,limited by their fluidity and high surface tension,challenges remain in achieving liquid metal patterns with low-cost,high-precision,large-scale,and complex ***,a fabrication technique was proposed based on laser-induced graphene(LIG)stamps to enable liquid metal self-selectively adhere to *** metal patterns could thus be achieved in different designed geometries and could be transferred onto stretchable *** liquid metal patterns exhibit exceptional electrical conductivity(3.24×10^(6)S/m even under 1000%strain),high stretchability(1000%strain,maximum of 2500%),small resistance changes under significant deformations(with a quality factor of 62.5 under 1000%strain),and high resolution(down to 50μm).Utilizing the patterned liquid metals,a stretchable integrated multifunctional optoelectronic system was demonstrated,encompassing a stretchable display matrix,a pressure sensor array,a wireless powering coil,and cardiovascular sensors,which further highlight the remarkable application potential of liquid metals in optoelectronic user-interaction and advanced physiological monitoring.

关键词： liquid metal wettability selective adhesion transfer printing stretchable electronics

Viscosity and structure of CaO-BaO-SiO_(2)-Al_(2)O_(3)-based mold slags for continuous casting of high titanium steel with different Tio2 absorption

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 1936-1946页

作者： Ya-tao Cui Xue-you Wang Xu-bin Zhang Qiang-qiang Wang Sheng-ping He college of materials science and Engineering Chongqing UniversityChongqing 400044China

The effect of TiO_(2) absorption into two different CaO-BaO-SiO_(2)-Al_(2)O_(3)-based mold slags from the steel plant on the viscosity,melting performance and microstructure of slags was investigated through the measurement of the viscosity-temperature relationship,melting temperature and Raman *** parameter of the number of non-bridging oxygen per tetrahedrally-coordinated atom(NBO/T)was also calculated to explain the microstructure variation of molten slags with different TiO_(2) *** variation of the actual slag consumption and the depth of the liquid slag in mold was explained through the comparison of the viscosity and the melting temperature of two different *** viscosity of mold slags(basicity=0.6)decreased from 1.1 to 0.68 Pa s with the increase in the Ti0_(2) absorption from 0 to 10%,while that of slags(basicity=0.7)decreased from 0.76 to 0.56 Pa s with the Ti0_(2) absorption from 0 to 6%.The activation energy of both two groups of slags had the tendency to decrease with the increasing TiO_(2) *** network structure of both two groups of slags measured by the Raman spectra showed that the fraction of complex structure units(Q^(1),Q^(2),Q^(3) and A1-O-Al)decreased and simple structure units(Al-O-and Q^(0))increased with the increase in TiO_(2) ***/T also increased with the increase in the TiO2 absorption,indicating that the absorption of TiO_(2) into slags resulted in the destruction of silicate/aluminate ***,the absorption of TiO_(2) into the current CaO-BaO-SiO_(2)-Al_(2)O_(3) mold slags decreased the degree of polymerization of these slags and then led to the decrease of viscosity.

关键词： Mold slag Viscosity Melting temperature Slag consumption Liquid slag depth Structure

Improvement of Microstructure and Mechanical Properties of Rapid Cooling Friction Stir-welded A1050 Pure Aluminum

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials science) 2024年第1期39卷 134-141页

作者：许楠 LIU Lutao SONG Qining ZHAO Jianhua BAO Yefeng college of materials science and Engineering Hohai UniversityChangzhou 213200China

Two-mm thick A1050 pure aluminum plates were successfully joined by conventional and rapid cooling friction stir welding(FSW), respectively. The microstructure and mechanical properties of the welded joints were investigated by electron backscatter diffraction characterization, Vickers hardness measurements, and tensile testing. The results showed that liquid CO_(2) coolant significantly reduced the peak temperature and increased the cooling rate, so the rapidly cooled FSW joint exhibited fine grains with a large number of dislocations. The grain refinement mechanism of the FSW A1050 pure aluminum joint was primarily attributed to the combined effects of continuous dynamic recrystallization, grain subdivision, and geometric dynamic recrystallization. Compared with conventional FSW, the yield strength, ultimate tensile strength, and fracture elongation of rapidly cooled FSW joint were significantly enhanced, and the welding efficiency was increased from 80% to 93%. The enhanced mechanical properties and improved synergy of strength and ductility were obtained due to the increased dislocation density and remarkable grain refinement. The wear of the tool can produce several WC particles retained in the joint, and the contribution of second phase strengthening to the enhanced strength should not be ignored.

关键词： aluminum alloy friction stir welding recrystallization microstructure mechanical properties

Deterioration Reason and Improvement Measure of the Retarding Effect of Protein Retarder on Phosphorus Building Gypsum

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials science) 2024年第4期39卷 962-967页

作者：刘志刚 TANG Zezheng 杨立荣 WANG Chunmei XIE Yuantao LIU Yisen college of materials science and Engineering North China University of Science and TechnologyTangshan 063210China

The retarding effect of protein retarder on phosphorus building gypsum(PBG)and desulfurization building gypsum(DBG)was investigated,and the results show that protein retarder for DBG can effectively prolong the setting time and displays a better retarding effect,but for PBG shows a poor retarding ***,the deterioration reason of the retarding effect of protein retarder on PBG was investigated by measuring the pH value and the retarder concentration of the liquid phase from vacuum filtration of PBG slurry at different hydration time,and the measure to improve the retarding effect of protein retarding on PBG was *** pH value of PBG slurry(<5.0)is lower than that of DBG slurry(7.8-8.5).After hydration for 5 min,the concentration of retarder in liquid phase of DBG slurry gradually decreases,but in liquid phase of PBG slurry continually increases,which results in the worse retarding effect of protein retarder on *** liquid phase pH value of PBG slurry can be adjusted higher by sodium silicate,which is beneficial to improvement in the retarding effect of the *** adding 1.0%of sodium silicate,the initial setting time of PBG was efficiently prolonged from 17 to 210 min,but little effect on the absolute dry flexural strength was observed.

关键词： protein retarder phosphorus building gypsum deterioration reason improvement measure

A review on ultra-small undoped MoS_(2) as advanced catalysts for renewable fuel production

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第2期6卷 92-112页

作者： Guoping Liu Lingling Ding Yuxuan Meng Ahmad Ali Guifu Zuo Xianguang Meng Kun Chang Oi Lun Li Jinhua Ye Hebei Provincial Laboratory of Inorganic Nonmetallic materials College of Materials Science and EngineeringNorth China University of Science and TechnologyTangshanChina college of materials science and Technology Nanjing University of Aeronautics and AstronauticsNanjingChina School of materials science and Engineering Pusan National UniversityBusanKorea International Center for materials Nanoarchitectonics(WPIMANA) National Institute for Materials Science(NIMS)1-1 NamikiTsukubaIbarakiJapan

Molybdenum disulfide(MoS_(2))has garnered significant attention in the field of catalysis due to the high density of active sites in its unique two-dimensional(2D)structure,which could be developed into numerous high-performance *** synthesis of ultra-small MoS2 particles(<10 nm)is highly desired in various experimental *** ultra-small structure could often lead to a distinct S-Mo coordination state and nonstoichiometric composition in MoSx,minimizing in-plane active sites of the 2D structure and making it probable to regulate the atomic and electronic structure of its intrinsic active sites on a large extent,especially in MoSx *** article summarizes the recent progress of catalysis over ultra-small undoped MoS_(2) particles for renewable fuel *** a systematic review of their synthesis,structural,and spectral characteristics,as well as the relationship between their catalytic performance and inherent defects,we aim to provide insights into catalysis over this matrix that may potentially enable advancement in the development of high-performance MoS_(2)-based catalysts for sustainable energy generation in the future.

关键词： applications catalytic MoS_(2) structure synthesis

Interfacial Reaction of Ti6Al4V Lattice Structure-Reinforced VW92 Alloy Matrix Composites

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 570-576页

作者： Haijun Wang Renju Cheng Xianhua Chen Mingbo Yang Daiyi Deng Lirui Liu Yongfeng Zhou Yanlong Ma Kaihong Zheng Fusheng Pan college of materials science and Engineering Chongqing University of TechnologyChongqing 400054China college of materials science and Engineering Chongqing UniversityChongqing 400044China Institute of New materials Guangdong Academy of SciencesGuangzhou 510650China

A novel melting infiltration by ultrasonic vibration was investigated and applied to fabricate Ti6Al4V(TC4)lattice structure-reinforced Mg-10Gd-2Y-1Zn-xZr(refer to VW92 hereafter,x=0,0.5 wt%)alloy matrix *** edge-to-edge matching model indicates that the well-matching and possible orientation relationships(ORs)between theα-Mg andα-Ti,[10-10]_(α-Mg)//[11-23]_(α-Ti) in(0002)_(α-Mg)//(10-10)_(α-Ti) possesses the smallest misfit of 0.4%(f_(r)),and thus theα-Mg grains can nucleate on the TC4 lattice *** reaction occurred in the TC4/VW92+0.5 wt%Zr composites,and the reaction product was confirmed to be Al_(2)Zr_(3),AlZr_(2) andα-Ti(Zr)particles formed by continuous solution of *** the interfacial products,the AlZr_(2) phase is a brittle phase with high-volume fraction,which is not conducive to the load *** generally speaking,theα-Ti(Zr)and theα-Mg tend to form a coherent interface,which is beneficial for improving the interfacial bonding strength of composites.

关键词： TC4 VW92 composites TC4 lattice structure Interfacial reaction Mismatch

MOF-derived porous graphitic carbon with optimized plateau capacity and rate capability for high performance lithium-ion capacitors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第2期31卷 395-404页

作者： Ge Chu Chaohui Wang Zhewei Yang Lin Qin Xin Fan college of materials science&Engineering Guilin University of TechnologyGuilin 541004China Institute of Energy Innovation College of Materials Science and EngineeringTaiyuan University of TechnologyTaiyuan 030024China

The development of anode materials with high rate capability and long charge-discharge plateau is the key to improve per-formance of lithium-ion capacitors(LICs).Herein,the porous graphitic carbon(PGC-1300)derived from a new triply interpenetrated co-balt metal-organic framework(Co-MOF)was prepared through the facile and robust carbonization at 1300°C and washing by HCl *** as-prepared PGC-1300 featured an optimized graphitization degree and porous framework,which not only contributes to high plateau capacity(105.0 mAh·g^(−1)below 0.2 V at 0.05 A·g^(−1)),but also supplies more convenient pathways for ions and increases the rate capability(128.5 mAh·g^(−1)at 3.2 A·g^(−1)).According to the kinetics analyses,it can be found that diffusion regulated surface induced capa-citive process and Li-ions intercalation process are coexisted for lithium-ion ***,LIC PGC-1300//AC constructed with pre-lithiated PGC-1300 anode and activated carbon(AC)cathode exhibited an increased energy density of 102.8 Wh·kg^(−1),a power dens-ity of 6017.1 W·kg^(−1),together with the excellent cyclic stability(91.6%retention after 10000 cycles at 1.0 A·g^(−1)).

关键词： metal-organic framework porous graphitic carbon optimized plateau capacity kinetic analysis lithium-ion capacitor

A physics-informed neural network for simulation of finite deformation in hyperelastic-magnetic coupling problems

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and mechanics(English Edition) 2024年第10期45卷 1717-1732页

作者： Lei WANG Zikun LUO Mengkai LU Minghai TANG Department of Engineering mechanics College of Mechanics and Engineering SciencesHohai University School of Mechanical Engineering and mechanics Ningbo University

Recently, numerous studies have demonstrated that the physics-informed neural network(PINN) can effectively and accurately resolve hyperelastic finite deformation problems. In this paper, a PINN framework for tackling hyperelastic-magnetic coupling problems is proposed. Since the solution space consists of two-phase domains,two separate networks are constructed to independently predict the solution for each phase region. In addition, a conscious point allocation strategy is incorporated to enhance the prediction precision of the PINN in regions characterized by sharp *** the developed framework, the magnetic fields and deformation fields of magnetorheological elastomers(MREs) are solved under the control of hyperelastic-magnetic coupling equations. Illustrative examples are provided and contrasted with the reference results to validate the predictive accuracy of the proposed framework. Moreover, the advantages of the proposed framework in solving hyperelastic-magnetic coupling problems are validated, particularly in handling small data sets, as well as its ability in swiftly and precisely forecasting magnetostrictive motion.

关键词： 74B20 74F15 deep learning finite deformation hyperelasticmagnetic coupling O343.5 physics-informed neural network (PINN) small data set

A vibration isolator with a controllable quasi-zero stiffness region based on nonlinear force design

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and mechanics(English Edition) 2024年第8期45卷 1279-1294页

作者： Xinyu LIAN Bing LIU Huaxia DENG Xinglong GONG CAS Key Laboratory of Mechanical Behavior and Design of materials Department of Modern MechanicsUniversity of Science and Technology of ChinaHefei 230027China State Key Laboratory of Nonlinear mechanics Institute of MechanicsChinese Academy of SciencesBeijing 100190China State Key Laboratory of Fire science University of Science and Technology of ChinaHefei 230026China

To achieve stability optimization in low-frequency vibration control for precision instruments,this paper presents a quasi-zero stiffness(QZS)vibration isolator with adjustable nonlinear ***,the stress-magnetism coupling model is established through meticulous theoretical *** controllable QZS interval is constructed via parameter design and magnetic control,effectively segregating the high static stiffness bearing section from the QZS vibration isolation ***,a displacement control scheme utilizing a magnetic force is proposed to regulate entry into the QZS working range for the vibration isolation *** results demonstrate that the operation within this QZS region reduces the peak-to-peak acceleration signal by approximately 66.7%compared with the operation outside this region,thereby significantly improving the low frequency performance of the QZS vibration isolator.

关键词： low frequency nonlinear vibration isolator quasi-zero stiffness(QzS)