检索结果-南通市图书馆

Viscosity and structure relationship with equimolar substitution of CaO with MgO in the CaO–MgO–Al_(2)O_(3)–SiO_(2)slag melts

引用

International Journal of Minerals,metallurgy and materials 2025年第1期32卷 70-79页

作者： Yong Hou Shuo Zhang Jie Dang Jia Guo Hanghang Zhou Xuewei Lü college of materials science and engineering Chongqing UniversityChongqing 400044China Chongqing Key Laboratory of Vanadium-Titanium metallurgy and New materials Chongqing UniversityChongqing 400044China

Currently,the Al_(2)O_(3)content in the high-alumina slag systems within blast furnaces is generally limited to 16wt%–18.5wt%,making it challenging to overcome this *** most studies that concentrated on managing the MgO/Al_(2)O_(3)ratio or basicity,this paper explored the effect of equimolar substitution of MgO for CaO on the viscosity and structure of a high-alumina CaO-MgO-Al_(2)O_(3)-SiO_(2)slag system,providing theoretical guidance and data to facilitate the application of high-alumina *** results revealed that the viscosity first decreased and then increased with higher MgO substitution,reaching a minimum at 15mol%MgO *** transform infrared spectroscopy(FTIR)results found that the depths of the troughs representing[SiO_(4)]tetrahedra,[AlO_(4)]tetrahedra,and Si-O-Al bending became progressively deeper with increased MgO *** of the Raman spectra showed that the average number of bridging oxygens per Si atom and the X_(Q^(3))/X_(Q^(2))(X_(Q^(i))is the molar fraction of Q^(i) unit,and i is the number of bridging oxygens in a[SiO_(4)]tetrahedral unit)ratio increased from 2.30 and 1.02 to 2.52 and 2.14,respectively,indicating a progressive polymerization of the silicate structure.X-ray photoelectron spectroscopy(XPS)results highlighted that non-bridging oxygen content decreased from 77.97mol% to 63.41mol% with increasing MgO concentration,whereas bridging oxygen and free oxygen contents *** analysis demonstrated a gradual increase in the polymerization degree of the tetrahedral structure with the increase in MgO ***,bond strength is another important factor affecting the slag *** occurrence of a viscosity minimum can be attributed to the complex evolution of bond strengths of non-bridging oxygens generated during depolymerization of the[SiO_(4)]and[AlO_(4)]tetrahedral structures by CaO and MgO.

关键词： aluminosilicate viscosity structure spectroscopy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interfacial Zn^(2+)-solvation regulator towards reversible and stable Zn anode

引用

Journal of Energy Chemistry 2025年第1期100卷 684-692页

作者： Miao Zhou Xiongbin Luo Hang Li Shan Guo Zhuang Tong Xiaotao Zhou Xu Li Zhaohui Hou Shuquan Liang Guozhao Fang college of Mechanical engineering Key Laboratory of Hunan Province for Advanced Carbon-based Functional MaterialsHunan Institute of Science and TechnologyYueyang 414006HunanChina School of materials science and engineering Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan ProvinceCentral South UniversityChangsha 410083HunanChina college of materials and metallurgy Guizhou UniversityGuiyang 550000GuizhouChina National Energy Metal Resources and New materials Key Laboratory Central South UniversityChangsha 410083HunanChina

Aqueous zinc-ion batteries (AZIBs) are fundamentally challenged by the instability of the electrode/electrolyte interface,predominantly due to irreversible zinc (Zn) deposition and hydrogen ***,the intricate mechanisms behind the electrochemical discrepancies induced by interfacial Zn^(2+)-solvation and deposition behavior demand comprehensive *** molecules endowed with special functional groups (such as hydroxyl,carboxyl,etc.) have the potential to significantly optimize the solvation structure of Zn^(2+)and regulate the interfacial electric double layer (EDL).By increasing nucleation overpotential and decreasing interfacial free energy,these functional groups facilitate a lower critical nucleation radius,thereby forming an asymptotic nucleation model to promote uniform Zn ***,this study presents a pioneering approach by introducing trace amounts of n-butanol as solvation regulators to engineer the homogenized Zn (H-Zn) anode with a uniform and dense *** interfacial reaction and structure evolution are explored by in/ex-situ experimental techniques,indicating that the H-Zn anode exhibits dendrite-free growth,no by-products,and weak hydrogen evolution,in sharp contrast to the bare ***,the H-Zn anode achieves a remarkable Zn utilization rate of approximately 20% and simultaneously sustains a prolonged cycle life exceeding 500 ***,the H-Zn//NH_(4)V_(4)O^(10)(NVO) full battery showcases exceptional cycle stability,retaining 95.04%capacity retention after 400 cycles at a large current density of 5 A g^(-1).This study enlightens solvation-regulated additives to develop Zn anode with superior utilization efficiency and extended operational lifespan.

关键词： Aqueous zinc-ion batteries Zn^(2+)-solvation structure Interfacial reaction Asymptotic nucleation model Reversible and stable Zn anode

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High toughness and strong electromagnetic shielding properties of PAM/PEG dual network hydrogels

引用

International Journal of Minerals,metallurgy and materials 2025年第3期32卷 747-755页

作者： Kunlan Diao Yuhuan Xu Jingyu Du Teng Zhou Xiao Zhan Daohai Zhang Xiaosi Qi Shuhao Qin School of Chemical engineering Guizhou Minzu UniversityGuiyang 550025China college of Physics Guizhou UniversityGuiyang 550025China National engineering Research Center for Compounding and Modification of Polymer materials Guiyang 550014China

With the wide application of electromagnetic wave,a high performance electromagnetic shielding material is urgently needed to solve the harm caused by electromagnetic *** cross-linking strategy is adopted in this ***(PAM)was synthesized by in-situ polymerization of acrylamide(AM)*** obtained PAM was blended with polyethylene glycol(PEG)to prepare PAM/PEG hydrogels and form rigid support ***,the modified carbon nanotubes(S-CNTs)were incorpor-ated into sodium alginate(SA)and PAM/***,Na+was used to trigger SA self-assembly,which significantly improved the mechanical properties and electrical conductivity of the hydrogels,and prepared PAM/PEG/SA/S-CNTs-Na hydrogels with high tough-ness and strong electromagnetic interference(EMI)shielding efficiency(SE).The results showed that the compressive strength of PAM/PEG/SA/S-CNTs-Na hydrogel was 19.05 MPa,which was 7.69%higher than that of PAM/PEG hydrogel(17.69 MPa).More en-couraging,the average EMI SE of PAM/PEG/SA/S-CNTs-Na hydrogels at a thickness of only 3 mm and a CNTs content of 16.53wt%was 32.92 dB,which is 113.21%higher than that of PAM/PEG hydrogels(15.44 dB).

关键词： polyacrylamide polyethylene glycol sodium alginate carbon nanotubes electromagnetic shielding

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Isothermal reduction kinetics and reduction prediction for iron ore pellets

引用

Journal of Iron and Steel Research International 2025年第1期32卷 64-72页

作者： Fei Meng Hao Liu Yue-lin Qin Huang-jie Hua Yin Deng Ze-zheng Sun Long-hai Liu School of metallurgy and materials engineering Chongqing University of Science and TechnologyChongqing401331China CISDI Group Co. Ltd.Chongqing401122China college of materials science and engineering Chongqing UniversityChongqing400044China Sichuan Desheng Group Vanadium&Titanium Co. Ltd.Leshan614000SichuanChina

Iron ore pellets,as one of the main charges of blast furnaces,have a greater impact on the CO_(2)emission reduction and stable operation of blast *** isothermal reduction behavior of the pellets obtained from a Chinese steel plant was studied in the gas mixtures of CO and N_(2).The results showed the reduction process is divided into two *** reduction in the initial stage(time t≤40 min)is cooperatively controlled by internal diffusion and interface chemical reactions with the activation energy of 30.19 and 16.67 kJ/mol,*** controlling step of the reduction in the final stage(t>40 min)is internal diffusion with the activation energy of 34.60 kJ/*** reduction process can be described by two equations obtained from kinetic *** reduction degree can be predicted under different temperatures and time,and the predicted results showed an excellent correlation with the experimental *** reduction mechanisms were confirmed by the analysis of the scanning electron microscope equipped with an energy dispersive spectrometer and optical microscope.

关键词： Pellet Reduction behavior Kinetics Mechanism Reduction prediction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Structural design and controllable preparation of SiC NWs@Fe_(3)O_(4)@NC nanocomposites for electromagnetic wave absorption

引用

International Journal of Minerals,metallurgy and materials 2025年第3期32卷 520-533页

作者： Wenxin Zhao Meng Zhang Yukun Miao Chang Wang Anguo Cui Liying Yuan Zeqing Miao Xiaoqing Wang Zhibo Wang Haoyu Pang Alan Meng Zhenjiang Li Ting Wang college of materials science and engineering Qingdao University of Science and TechnologyQingdao 266042China Shandong engineering Laboratory for Preparation and Application of High-Performance Carbon-materials College of Electromechanical EngineeringQingdao University of Science and TechnologyQingdao 266061China Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life science MOEShandong Key Laboratory of Biochemical AnalysisCollege of Chemistry and Molecular EngineeringQingdao University of Science and TechnologyQingdao 266042China college of Chemical engineering Qingdao University of Science and TechnologyQingdao 266042China

Using SiC nanowires(SiCNWs)as the substrate,reflux-annealing and electrodeposition-carbonization were sequentially applied to integrate SiC nanowires with magnetic Fe_(3)O_(4) nanoparticles and amorphous nitrogen-doped carbon(NC)for the fabrication of SiCNWs@Fe_(3)O_(4)@NC *** testing and characterization of this product provided valuable insights into the im-pact of structural and composition changes on its electromagnetic wave absorption *** optimized SiCNWs@Fe_(3)O_(4)@NC nanocomposite,which has 30wt%filler content and a corresponding thickness of 2.03 mm,demonstrates exceptional performance with the minimum reflection loss(RL_(min))of-53.69 dB at 11.04 GHz and effective absorption bandwidth(EAB)of 4.4 *** synergistic effects of the enhanced nanocomposite on electromagnetic wave absorption were thoroughly elucidated using the theories of multiple scattering,polarization relaxation,hysteresis loss,and eddy current ***,a multicomponent electromagnetic wave attenu-ation model was established,providing valuable insight into the design of novel absorbing materials and the enhancement of their absorp-tion *** research demonstrated the significant potential of the SiCNWs@Fe_(3)O_(4)@NC nanocomposite as a highly efficient electromagnetic wave-absorbing material with potential applications in various fields,such as stealth technology and microwave absorption.

关键词： electromagnetic attenuation mechanism multicomponent nanocomposite SiC nanowires structural design

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Atomic-scale insights into microscopic mechanisms of grain boundary segregation in Al−Cu alloys

引用

Transactions of Nonferrous Metals Society of China 2025年第1期35卷 1-12页

作者： Xiong SHUAI Hong MAO Sai TANG Yi KONG Yong DU State Key Laboratory of Powder metallurgy Central South UniversityChangsha 410083China college of Mechanical engineering Hunan Institute of Science and TechnologyYueyang 414006China National Key Laboratory of science and Technology on High-strength Structural materials Central South UniversityChangsha 410083China

This study aims to clarify the mechanisms for the grain boundary(GB)segregation through investigating the absorption of excess solute atoms at GBs in Al−Cu alloys by using the hybrid molecular dynamics/Monte Carlo *** segregation mechanisms,substitutional and interstitial mechanisms,are *** intergranular defects,including dislocations,steps and vacancies,and the intervals in structural units are conductive to the prevalence of interstitial *** substitutional mechanism is favored by the highly ordered twin ***,the two mechanisms affect the GB structure *** is quantified that interstitial mechanism is less destructive to GB structure than substitutional one,and often leads to a segregation level being up to about 6 times higher than the *** findings contribute to atomic scale insights into the microscopic mechanisms about how solute atoms are absorbed by GB structures,and clarify the correlation among intergranular structures,segregation mechanisms and kinetics.

关键词： grain boundaries segregation Al−Cu alloy intergranular structure molecular dynamics simulation Monte Carlo simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

引用

International Journal of Minerals,metallurgy and materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu Yang Lei Xiao Zhiyong Kan Jing Guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China college of materials science and engineering Fuzhou UniversityFuzhou 350108China college of Chemistry and Environmental science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-interface structure design of bamboo-based carbon/Co/CoO composite electromagnetic wave absorber based on biomimetic honeycomb-shaped superstructure

引用

International Journal of Minerals,metallurgy and materials 2025年第3期32卷 631-644页

作者： Yanting Wang He Han Huiyang Bian Yanjun Li Zhichao Lou Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources College of Materials Science and EngineeringNanjing Forestry UniversityNanjing 210037China college of Light Industry and Food engineering Nanjing Forestry UniversityNanjing 210037China

The rapid development of 5G communication technology and smart electronic and electrical equipment will inevitably lead to electromagnetic radiation *** heterointerface polarization relaxation through nanostructure design and interface modifica-tion has proven to be an effective strategy to obtain efficient electromagnetic wave ***,this work implements an innovative method that combines biomimetic honeycomb superstructure to constrain hierarchical porous heterostructure composed of Co/CoO nano-particles to improve the interfacial polarization *** method effectively controlled the absorption efficiency of Co^(2+)through de-lignification modification of bamboo,and combined with the bionic carbon-based natural hierarchical porous structure to achieve uniform dispersion of nanoparticles,which is conducive to the in-depth construction of heterogeneous *** addition,the multiphase struc-ture brought about by high-temperature pyrolysis provides the best dielectric loss and impedance matching for the ***,the obtained bamboo-based Co/CoO multiphase composite showed excellent electromagnetic wave absorption performance,achieving excel-lent reflection loss(RL)of-79 dB and effective absorption band width of 4.12 GHz(6.84-10.96 GHz)at low load of 15wt%.Among them,the material’s optimal radar cross-section(RCS)reduction value can reach 31.9 dB·m^(2).This work provides a new approach to the micro-control and comprehensive optimization of macro-design of microwave absorbers,and offers new ideas for the high-value utiliza-tion of biomass materials.

关键词： biomass honeycomb porous heterojunction structure interfacial polarization electromagnetic wave absorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Phase equilibria of Fe_(3)O_(4)-Cr_(2)O_(3)-CaO system:experimental measurements and thermodynamic calculations

引用

Journal of Iron and Steel Research International 2025年第1期32卷 95-104页

作者： Ao Zhu Chen-ying Shi Pei-yuan Ni Teng-fei Deng State Key Laboratory of Silicate materials for Architectures Wuhan University of TechnologyWuhan 430070HubeiChina college of Chemistry and Chemical engineering Central South UniversityChangsha 410083HunanChina Key Laboratory of Ecological metallurgy of Multi-Metal Intergrown Ores of Education Ministry School of MetallurgyNortheastern UniversityShenyang 110819LiaoningChina

Understanding the phase equilibria of the Fe_(3)O_(4)-Cr_(2)O_(3)-CaO system is essential for the efficient recycling of stainless steel pickling *** isothermal section of this system at 1473 K under oxygen partial pressure of 0.15 Pa was *** experiments on the relevant binary systems were conducted using a combination of equilibrium-quenching techniques,X-ray diffraction,high-resolution transmission electron microscope,and electron probe *** systems were rigorously assessed using the CALPHAD(CALculation of Phase Diagram)method,incorporating the present experimental *** liquid phase was modeled using the ionic two-sublattice model,represented as(Ca^(2+),Cr^(3+),Fe^(2+))P(O_(2)^(-),Va,FeO_(1.5))Q,where Va represents vacancy,and P and Q denote the number of sites on the cation and anion sublattices,*** ensure electroneutrality,the values of P and Q adjust according to the composition of the *** this,the isothermal section of the Fe_(3)O_(4)-Cr_(2)O_(3)-CaO system at 1473 K under the specified oxygen partial pressure was obtained based on the thermodynamic parameters of the binary *** present experimental data and calculation results hold significant implications for the comprehensive recycling of stainless steel pickling sludge.

关键词： Fe_(3)O_(4)-Cr_(2)O_(3)-CaO system Ionic two-sublattice model Phase equilibria CALPHAD

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Superhydrophobic and corrosion-resistant siloxane-modified MgAl-LDHs coatings on magnesium alloy prepared under mild conditions

引用

International Journal of Minerals,metallurgy and materials 2025年第2期32卷 450-463页

作者： Wenxi Zhang Zhangzelong Zhuo Dan Xu Liang Wu Zhihui Xie Chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province College of Chemistry and Chemical EngineeringChina West Normal UniversityNanchong 637002China college of materials science and engineering/National engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China

We have developed a superhydrophobic and corrosion-resistant LDH-W/PFDTMS composite coating on the surface of Mg *** composite comprised a tungstate-intercalated(LDH-W)underlayer that was grown at low temperature(relative to hydrothermal reaction conditions)under atmospheric pressure and an outer polysiloxane layer created from a solution containing perfluorodecyltrimethoxysilane(PFDTMS)using a simple immersion *** successful intercalation of tungstate into the LDH phase and the following formation of the polysiloxane layer were confirmed through X-ray diffraction(XRD),Fourier transform infrared(FTIR)spectroscopy,and X-ray photoelectron spectroscopy(XPS).The corrosion resistance of the LDH-W film,both before and after the PFDTMS modification,was evaluated using electrochemical impedance spectroscopy(EIS),Tafel curves,and immersion *** results showed that Mg coated with LDH-W/PFDTMS exhibited significantly enhanced corrosion protection compared to the unmodified LDHW film,with no apparent signs of corrosion after exposure to 3.5wt%NaCl solution for 15 ***,the LDH-W/PFDTMS coating demonstrated superior superhydrophobicity and self-cleaning properties against water and several common beverages,as confirmed by static contact angle and water-repellency *** results offer valuable insights into preparing superhydrophobic and corrosion-resistant LDH-based composite coatings on Mg alloy surfaces under relatively mild reaction conditions.

关键词： Mg alloy corrosion coating layered double hydroxide

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：