检索结果-南通市图书馆

Viscosity and structure relationship with equimolar substitution of CaO with MgO in the CaO–MgO–Al_(2)O_(3)–SiO_(2)slag melts

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 70-79页

作者： Yong Hou Shuo Zhang Jie Dang Jia Guo Hanghang Zhou Xuewei Lü college of materials science and engineering Chongqing UniversityChongqing 400044China Chongqing Key Laboratory of Vanadium-Titanium Metallurgy and New materials Chongqing UniversityChongqing 400044China

Currently,the Al_(2)O_(3)content in the high-alumina slag systems within blast furnaces is generally limited to 16wt%–18.5wt%,making it challenging to overcome this *** most studies that concentrated on managing the MgO/Al_(2)O_(3)ratio or basicity,this paper explored the effect of equimolar substitution of MgO for CaO on the viscosity and structure of a high-alumina CaO-MgO-Al_(2)O_(3)-SiO_(2)slag system,providing theoretical guidance and data to facilitate the application of high-alumina *** results revealed that the viscosity first decreased and then increased with higher MgO substitution,reaching a minimum at 15mol%MgO *** transform infrared spectroscopy(FTIR)results found that the depths of the troughs representing[SiO_(4)]tetrahedra,[AlO_(4)]tetrahedra,and Si-O-Al bending became progressively deeper with increased MgO *** of the Raman spectra showed that the average number of bridging oxygens per Si atom and the X_(Q^(3))/X_(Q^(2))(X_(Q^(i))is the molar fraction of Q^(i) unit,and i is the number of bridging oxygens in a[SiO_(4)]tetrahedral unit)ratio increased from 2.30 and 1.02 to 2.52 and 2.14,respectively,indicating a progressive polymerization of the silicate structure.X-ray photoelectron spectroscopy(XPS)results highlighted that non-bridging oxygen content decreased from 77.97mol% to 63.41mol% with increasing MgO concentration,whereas bridging oxygen and free oxygen contents *** analysis demonstrated a gradual increase in the polymerization degree of the tetrahedral structure with the increase in MgO ***,bond strength is another important factor affecting the slag *** occurrence of a viscosity minimum can be attributed to the complex evolution of bond strengths of non-bridging oxygens generated during depolymerization of the[SiO_(4)]and[AlO_(4)]tetrahedral structures by CaO and MgO.

关键词： aluminosilicate viscosity structure spectroscopy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 147-153页

作者： Junjie Li Wenbo Yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling Xue Wenning Liu Shoumei Xiong Center of materials science and engineering School of Mechanical and Electronic Control EngineeringBeijing Jiaotong UniversityBeijing 100044China Traffic&Transportation engineering Central South UniversityChangsha 410075China Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China School of materials science and engineering Tsinghua UniversityBeijing 100084China

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile *** can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated ***,the development of non-heat treatment Al alloys is becoming the hot *** addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of *** achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and *** influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic *** results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased ***,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical *** introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

关键词： aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advancements in Liver Tumor Detection:A Comprehensive Review of Various Deep Learning Models

引用

Computer Modeling in engineering & sciences 2025年第1期142卷 91-122页

作者： Shanmugasundaram Hariharan D.Anandan Murugaperumal Krishnamoorthy Vinay Kukreja Nitin Goyal Shih-Yu Chen Deptartment of Artificial Intelligence and Data science Vardhaman College of EngineeringHyderabad501218India Deptartment of CSE V.S.B College of EngineeringKarur639111India Deptartment of Electrical and Electronics engineering Vardhaman College of EngineeringHyderabad501218India Centre for Research Impact&Outcome Chitkara UniversityRajpura140401PunjabIndia Department of Computer science and engineering School of Engineering and TechnologyCentral University of HaryanaMahendergarh123031HaryanaIndia Department of Computer science and Information engineering National Yunlin University of Science and TechnologyYunlin64002Taiwan Intelligence Recognition Industry Service Research Center National Yunlin University of Science and TechnologyYunlin64002Taiwan

Liver cancer remains a leading cause of mortality worldwide,and precise diagnostic tools are essential for effective treatment *** Tumors(LTs)vary significantly in size,shape,and location,and can present with tissues of similar intensities,making automatically segmenting and classifying LTs from abdominal tomography images crucial and *** review examines recent advancements in Liver Segmentation(LS)and Tumor Segmentation(TS)algorithms,highlighting their strengths and limitations regarding precision,automation,and *** metrics are utilized to assess key detection algorithms and analytical methods,emphasizing their effectiveness and relevance in clinical *** review also addresses ongoing challenges in liver tumor segmentation and identification,such as managing high variability in patient data and ensuring robustness across different imaging *** suggests directions for future research,with insights into technological advancements that can enhance surgical planning and diagnostic accuracy by comparing popular *** paper contributes to a comprehensive understanding of current liver tumor detection techniques,provides a roadmap for future innovations,and improves diagnostic and therapeutic outcomes for liver cancer by integrating recent progress with remaining challenges.

关键词： Liver tumor detection liver tumor segmentation image processing liver tumor diagnosis feature extraction tumor classification deep learning machine learning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu Yang Lei Xiao Zhiyong Kan Jing Guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China college of materials science and engineering Fuzhou UniversityFuzhou 350108China college of Chemistry and Environmental science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

引用

Nano-Micro Letters 2025年第1期17卷 507-527页

作者： Zhiqiang Guo Di Lan Zirui Jia Zhenguo Gao Xuetao Shi Mukun He Hua Guo Guanglei Wu Pengfei Yin college of science Sichuan Agricultural UniversityYa’an 625014People’s Republic of China School of materials science and engineering Hubei University of Automotive TechnologyShiyan 442002People’s Republic of China Institute of materials for Energy and Environment State Key Laboratory of Bio‑Fibers and Eco‑TextilesCollege of Materials Science and EngineeringQingdao UniversityQingdao 266071People’s Republic of China Shaanxi Key Laboratory of Macromolecular science and Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi’anShaanxi 710072People’s Republic of China

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly ***-component interface engineering is considered an effective means to achieve high-efficiency EMW ***,interface modulation engineering has not been fully discussed and has great potential in the field of EMW *** this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal *** utilizing the different properties of different substances,rich heterogeneous interfaces are *** effectively promotes charge transfer and enhances interfacial polarization and conduction *** prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy *** minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 ***,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel ***,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

关键词： Electrostatic spinning Component regulation Heterogeneous interfaces Electromagnetic wave absorption Corrosion protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In situ polymerization of poly(3,4-ethylenedioxythiophene)protective layer towards stable zinc anode

引用

Nano Research 2025年第1期18卷 382-394页

作者： Debin Luo Peng Zhou Xiaowei Lv Panpan Sun Xiaohua Sun Hewei Zhao college of materials and Chemical engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion MaterialsChina Three Gorges UniversityYichang 443002China Hubei Three Gorges Laboratory Yichang 443007China School of Chemistry Beihang UniversityBeijing 100191China

Aqueous zinc-ion devices are considered promising candidates for energy storage due to their high safety,low cost and relatively high energy ***,the dendrite growth,hydrogen evolution reaction(HER)and corrosion of the zinc anode significantly limit the development of Zn-ion ***,an inexpensive poly(3,4-ethylenedioxythiophene)(PEDOT)protective layer was constructed in situ on the Zn surface using electropolymerization to suppress dendrite growth and side reactions,thereby enhancing the reversibility of *** and theoretical calculations revealed that this hydrophilic protective layer promotes the desolvation process of hydrated Zn^(2+)and facilitates the transport of zinc ions,thus improving the thermodynamic and kinetic properties of Zn^(2+)deposition and inhibiting interfacial side ***,the optimized PEDOT@Zn symmetric battery exhibited a cycling stability exceeding 1250 h at 0.5 mA·cm^(-2)and 0.25 mAh·cm^(-2),with a significantly reduced overpotential(from 91.8 to 35 mV).With the assistance of the PEDOT protective layer,the PEDOT@Zn//Cu battery maintained approximately 99.5%Coulombic efficiency after 450 ***-situ scanning electron microscopy(SEM)and in situ optical microscopy characterizations further confirmed that the PEDOT protective layer can effectively suppress the growth of zinc ***,the Zn-ion capacitors assembled by the PEDOT@Zn and activated carbon also demonstrated outstanding cycling stability.

关键词： zinc-ion devices zinc anode poly(3 4-ethylenedioxythiophene)(PEDOT) dendrite desolvation process

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Magneto‑Dielectric Synergy and Multiscale Hierarchical Structure Design Enable Flexible Multipurpose Microwave Absorption and Infrared Stealth Compatibility

引用

Nano-Micro Letters 2025年第2期17卷 401-416页

作者： Chen Li Leilei Liang Baoshan Zhang Yi Yang Guangbin Ji School of Electronic science and engineering Nanjing UniversityNanjing 210093People’s Republic of China college of materials science and Technology Nanjing University of Aeronautics and AstronauticsNanjing 210016People’s Republic of China

Developing advanced stealth devices to cope with radar-infrared(IR)fusion detection and diverse application scenarios is increasingly demanded,which faces significant challenges due to conflicting microwave and IR cloaking mechanisms and functional integration ***,we propose a multiscale hierarchical structure design,integrating wrinkled MXene IR shielding layer and flexible Fe_(3)O_(4)@C/PDMS microwave absorption *** top wrinkled MXene layer induces the intensive diffuse reflection effect,shielding IR radiation signals while allowing microwave to pass ***,the permeable microwaves are assimilated into the bottom Fe_(3)O_(4)@C/PDMS layer via strong magneto-electric *** theoretical and experimental optimization,the assembled stealth devices realize a near-perfect stealth capability in both X-band(8–12 GHz)and long-wave infrared(8–14μm)wavelength ***,it delivers a radar cross-section reduction of−20 dB m^(2),a large apparent temperature modulation range(ΔT=70℃),and a low average IR emissivity of ***,the optimal device demonstrates exceptional curved surface conformability,self-cleaning capability(contact angle≈129°),and abrasion resistance(recovery time≈5 s).This design strategy promotes the development of multispectral stealth technology and reinforces its applicability and durability in complex and hostile environments.

关键词： Microwave absorption Radar-infrared compatible stealth Wrinkled MXene Magneto-dielectric synergy Multifunction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Gradient‑Layered MXene/Hollow Lignin Nanospheres Architecture Design for Flexible and Stretchable Supercapacitors

引用

Nano-Micro Letters 2025年第2期17卷 447-462页

作者： Haonan Zhang Cheng Hao Tongtong Fu Dian Yu Jane Howe Kaiwen Chen Ning Yan Hao Ren Huamin Zhai Jiangsu Provincial Key Lab of Sustainable Pulp and Paper Technology and Biomass materials NanJing Forestry UniversityNanjing 210037People’s Republic of China Department of Chemical engineering and Applied Chemistry University of Toronto200 College StreetTorontoON M5S 3E5Canada Department of materials science and engineering University of Toronto184 College StreetTorontoON M5S 3E4Canada college of materials science and engineering Nanjing Forestry UniversityNanjing 210037People’s Republic of China

With the rapid development of flexible wearable electronics,the demand for stretchable energy storage devices has *** this work,a novel gradient-layered architecture was design based on single-pore hollow lignin nanospheres(HLNPs)-intercalated two-dimensional transition metal carbide(Ti_(3)C_(2)T_(x) MXene)for fabricating highly stretchable and durable *** depositing and inserting HLNPs in the MXene layers with a bottom-up decreasing gradient,a multilayered porous MXene structure with smooth ion channels was constructed by reducing the overstacking of MXene ***,the micro-chamber architecture of thin-walled lignin nanospheres effectively extended the contact area between lignin and MXene to improve ion and electron accessibility,thus better utilizing the pseudocapacitive property of *** these strategies effectively enhanced the capacitive performance of the *** addition,HLNPs,which acted as a protective phase for MXene layer,enhanced mechanical properties of the wrinkled stretchable electrodes by releasing stress through slip and deformation during the stretch-release cycling and greatly improved the structural integrity and capacitive stability of the *** electrodes and symmetric flexible all-solid-state supercapacitors capable of enduring 600%uniaxial tensile strain were developed with high specific capacitances of 1273 mF cm^(−2)(241 F g^(−1))and 514 mF cm^(−2)(95 F g^(−1)),***,their capacitances were well preserved after 1000 times of 600%stretch-release *** study showcased new possibilities of incorporating biobased lignin nanospheres in energy storage devices to fabricate stretchable devices leveraging synergies among various two-dimensional nanomaterials.

关键词： Hollow lignin nanospheres MXene Gradient-layered architecture Wrinkled electrodes Stretchable supercapacitors

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 214-220页

作者： Chao Tan Junling Lü Chunchi Zhang Dong Liang Lei Yang Zegao Wang college of materials science and engineering Sichuan UniversityChengdu 610065China The 54th Research Institute of China Electronics Technology Group Corporation Shijiazhuang 050081China

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other ***-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate ***,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of *** we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor *** systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 *** sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on ***,there was almost no performance loss for the device as left in the air for two months.

关键词： flexible gate dielectric transistor force sensor impulse sensor force sensor array

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 20-38页

作者： Qinjin Dai Xuefeng Liu Xin Ma Shaojie Tian Qinghe Cui Beijing Advanced Innovation Center for materials Genome engineering University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic materials and Processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China Laboratory for Advanced materials Processing of Ministry of Education University of Science and Technology BeijingBeijing 100083China School of Mechanical and Electrical engineering Xinjiang Institute of EngineeringUrumqi 830023China

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine *** analysis has been used to characterize the shapes of metal materials at various scales and *** methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and ***,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal *** the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear *** relationship between the fractal dimensions and properties of metal material surfaces and interfaces is *** from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be *** is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

关键词： metal material surfaces and interfaces fractal analysis fractal dimension homogeneity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：