检索结果-南通市图书馆

Asian Journal of Andrology 2024年第2期26卷 183-188页

作者： Huan Jiang Chu-Jie Huang Department of Reproductive Endocrinology Longgang District Maternity&Child Healthcare Hospital of Shenzhen City(Longgang Maternity and Child Institute of Shantou University Medical College)Shenzhen 518172China Institute of Reproductive Immunology College of Life Science and TechnologyJinan UniversityGuangzhou 510632China

Aberrant sperm protamination is linked to sperm dysmorphology and nuclear chromatin condensation.Yet,its effects on sperm cytoplasmic maturation remain largely unexplored.The relationships of protamines,sperm morphology,DNA damage,and cytoplasmic remodeling were illustrated in this study to provide fresh perspectives on the mechanisms of male infertility.A total of 205 infertile males were allocated into 5 groups according to the percentage of spermatozoa exhibiting abnormal morphology within their samples.Sperm concentration,motility,abnormal sperm morphology,cytoplasmic droplets(CDs),and excess residual cytoplasm(ERC)were analyzed according to the World Health Organization manual(2010).Sperm nuclear vacuoles(NVs)were determined by propidium iodide(PI)staining.Sperm protamine expressions(P1 and P2)were detected by western blot.DNA damage was measured by acridine orange test(AOT)to calculate the proportion of sperm with single-strand DNA breaks(SSBs).Our data showed that sperm concentration and motility in infertile males significantly decreased with the severity of abnormal sperm morphology(both P<0.01).P1 level,P1/P2 ratio,and SSB rate increased with the severity of sperm dysmorphology,whilst the P2 level decreased(all P

关键词： abnormal sperm morphology excess residual cytoplasm male infertility protamines sperm DNA damage sperm nuclear vacuoles

Recent advances in memristors based on two-dimensional ferroelectric materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第1期19卷 195-218页

作者： Wenbiao Niu Guanglong Ding Ziqi Jia Xin-Qi Ma JiYu Zhao Kui Zhou Su-Ting Han Chi-Ching Kuo Ye Zhou Institute for Advanced Study Shenzhen UniversityShenzhen 518060China college of Electronics and Information Engineering Shenzhen UniversityShenzhen 518060China Institute of Organic and Polymeric Materials Research and Development Center of Smart Textile TechnologyTaipei University of TechnologyTaipei 10608TaiwanChina

In this big data era, the explosive growth of information puts ultra-high demands on the data storage/computing, such as high computing power, low energy consumption, and excellent stability. However, facing this challenge, the traditional von Neumann architecture-based computing system is out of its depth owing to the separated memory and data processing unit architecture. One of the most effective ways to solve this challenge is building brain inspired computing system with in-memory computing and parallel processing ability based on neuromorphic devices. Therefore, there is a research trend toward the memristors, that can be applied to build neuromorphic computing systems due to their large switching ratio, high storage density, low power consumption, and high stability. Two-dimensional (2D) ferroelectric materials, as novel types of functional materials, show great potential in the preparations of memristors because of the atomic scale thickness, high carrier mobility, mechanical flexibility, and thermal stability. 2D ferroelectric materials can realize resistive switching (RS) because of the presence of natural dipoles whose direction can be flipped with the change of the applied electric field thus producing different polarizations, therefore, making them powerful candidates for future data storage and computing. In this review article, we introduce the physical mechanisms, characterizations, and synthetic methods of 2D ferroelectric materials, and then summarize the applications of 2D ferroelectric materials in memristors for memory and synaptic devices. At last, we deliberate the advantages and future challenges of 2D ferroelectric materials in the application of memristors devices.

关键词： two-dimensional ferroelectric materials synthesis strategies memristors artificial synapses

Plant photobiology:From basic theoretical research to crop production

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Integrative Plant Biology 2024年第5期66卷 847-848页

作者： Hongtao Liu Jigang Li college of Life Sciences and Oceanography Shenzhen UniversityShenzhen 518061China State Key Laboratory of Plant Environmental Resilience College of Biological SciencesChina Agricultural UniversityBeijing 100193China

As one of the most important environmental signals for plants,light plays a profound role in regulating virtually every aspect of plant growth and development.Light signals are perceived by plants via several families of photoreceptors,among which phytochromes are responsible for absorbing the red(R)and far-red(FR)wavelengths(600–750 nm),cryptochromes(CRYs)perceive the blue(B)/ultraviolet-A(UV-A)wavelengths(320–500 nm),and UV RESISTANCE LOCUS 8(UVR8)is a recently-characterized UV-B(280–320 nm)photoreceptor.

关键词： UVR8 photoreceptor development.

维普期刊数据库

In vivo label-free measurement of blood flow velocity symmetry based on dual line scanning third-harmonic generation microscopy excited at the 1700 nm window

在线全文

学校读者我要写书评

暂无评论

Journal of Innovative Optical Health Sciences 2024年第1期17卷 61-68页

作者： Hui Cheng Jincheng Zhong Ping Qiu Ke Wang Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province college of Physics and Optoelectronic Engineering shenzhen university Shenzhen 518060 P.R.China

Measurement of bloodflow velocity is key to understanding physiology and pathology in vivo.While most measurements are performed at the middle of the blood vessel,little research has been done on characterizing the instantaneous bloodflow velocity distribution.This is mainly due to the lack of measurement technology with high spatial and temporal resolution.Here,we tackle this problem with our recently developed dual-wavelength line-scan third-harmonic generation(THG)imaging technology.Simultaneous acquisition of dual-wavelength THG line-scanning signals enables measurement of bloodflow velocities at two radially symmetric positions in both venules and arterioles in mouse brain in vivo.Our results clearly show that the instantaneous bloodflow velocity is not symmetric under general conditions.

关键词： 1700 nm-Window third-harmonic generation imaging blood flow velocity

Ileal collision tumor associated with gastrointestinal bleeding: A case report and review of literature

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Gastrointestinal Surgery 2024年第2期16卷 628-634页

作者： Yu-Qi Wu Hong-Yan Wang Mu-Min Shao Lin Xu Xiao-Yan Jiang Shao-Ju Guo Department of Gastroenterology Shenzhen Traditional Chinese Medicine HospitalThe Fourth Clinical Medical College of Guangzhou University of Chinese MedicineShenzhen 518033Guangdong ProvinceChina Department of Pathology Shenzhen Traditional Chinese Medicine HospitalThe Fourth Clinical Medical College of Guangzhou University of Chinese MedicineShenzhen 518033Guangdong ProvinceChina

BACKGROUND Collision tumors involving the small intestine,specifically the combination of a hamartomatous tumor and a lipoma,are extremely rare.To our knowledge,no previous case report has described a collision tumor composed of two benign tumors of different origins in the small intestine.CASE SUMMARY Here,we present the case of an 82-year-old woman who presented with hemorrhagic shock and was found to have a mass measuring approximately 50 mm×32 mm×30 mm in the terminal ileum.Based on computed tomography scan findings,the mass was initially suspected to be a lipoma.A subsequent colonoscopy revealed a pedunculated submucosal elevation consisting of two distinct parts with a visible demarcation line.A biopsy of the upper portion suggested a juvenile polyp(JP).Owing to the patient’s advanced age,multiple comorbidities,and poor surgical tolerance,a modified endoscopic submucosal dissection was performed.Histopathological examination of the excised mucosal mass revealed a lipoma at the base and a JP at the top,demonstrating evidence of rupture and associated bleeding.The patient’s overall health remained satisfactory,with no recurrence of hematochezia during the six-month follow-up period.CONCLUSION This case report provides new evidence for the understanding of gastrointestinal collision tumors,emphasizing their diverse clinical presentations and histopathological characteristics.It also offers diagnostic and therapeutic insights as well as an approach for managing benign collision tumors.

关键词： Collision tumor Gastrointestinal bleeding Hamartomatous tumor Lipoma Modified endoscopic submucosal dissection Case report

Design,fabrication,and characterization of hierarchical mechanical metamaterials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Mechanical Engineering 2024年第1期19卷 73-83页

作者： Jian SONG Junfei YAN Bengang YI Automotive Engineering Research Institute BYD Auto Industry Co.Ltd.Shenzhen 518000China college of Civil and Transportation Engineering Shenzhen UniversityShenzhen 518060China

Natural mechanical materials,such as bamboo and bone,often exhibit superior specific mechanical properties due to their hierarchical porous architectures.Using the principle of hierarchy as inspiration can facilitate the development of hierarchical mechanical metamaterials(HMMs)across multiple length scales via 3D printing.In this work,we propose self-similar HMMs that combine octet-truss(OCT)architecture as the first and second orders,with cubic architecture as the third or more orders.These HMMs were fabricated using stereolithography 3D printing,with the length sizes ranging from approximately 200µm to the centimeter scale.The compressive stress–strain behaviors of HMMs exhibit a zigzag characteristic,and the toughness and energy absorption can be significantly enhanced by the hierarchical architecture.The compressive moduli are comparable to that of natural materials,and the strengths are superior to that of most polymer/metal foams,alumina hollow/carbon lattices,and other natural materials.Furthermore,the flexural stress–strain curves exhibit a nonlinear behavior,which can be attributed to the hierarchical architecture and local damage propagation.The relatively high mechanical properties can be attributed to the synergistic effect of the stretch-dominated OCT architecture and the bending-dominated cube architecture.Lastly,an ultralight HMM-integrated unmanned aerial vehicle(HMM-UAV)was successfully designed and printed.The HMM-UAV is~85%lighter than its bulk counterpart,remarkably extending the flight duration time(~53%).This work not only provides an effective design strategy for HMMs but also further expands the application benchmark of HMMs.

关键词： 3D printing mechanical metamaterials hierarchical architecture mechanical behavior unmanned aerial vehicle(UAV)

Multi-scale data joint inversion of minerals and porosity in altered igneous reservoirs—A case study in the South China Sea

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 206-220页

作者： Xin-Ru Wang Bao-Zhi Pan Yu-Hang Guo Qing-Hui Wang Yao Guan college of Geo-exploration Science and Technology Jilin UniversityChangchun130046JilinChina Research Institute CNOOC Ltd.-ShenzhenShenzhen518000GuangdongChina

There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.

关键词： Joint inversion Altered igneous rock Element correction method Lithology identification Multi mineral volume model

维普期刊数据库

Progress and prospects of graphene-based materials in lithium batteries

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 1886-1905页

作者： Shen Lai Tao Huang Pei Liu Hong-Bin Wang Shi-Chun Yang Xin-Hua Liu Kai Yang Qian-Ling Zhang Jian-Hong Liu Jiang-Tao Hu Graphene Composite Research Center College of Chemistry and Environmental Engineering Shenzhen University college of Physics and Optoelectronic Engineering Shenzhen University shenzhen Eigen-Equation Graphene Technology Co.Ltd School of Transportation Science and Engineering Beihang University Department of Electrical and Electronic Engineering Advanced Technology Institute University of Surrey

Reasonable design and applications of graphene-based materials are supposed to be promising ways to tackle many fundamental problems emerging in lithium batteries,including suppression of electrode/electrolyte side reactions,stabilization of electrode architecture,and improvement of conductive component.Therefore,extensive fundamental research on this aspect has been performed so far.However,when it comes to large-scale industrial applications,the utilization of graphene-based materials progresses at a very slow pace.Namely,there presents a severe technological decoupling between academic research and industrial application,and there is an urgent need to link them.Herein,in order to address current issues of graphene-based materials used in lithium batteries,we present their latest advancements with stateof-the-art technologies.Potential applications of graphenebased materials in practical lithium batteries are highlighted and predicted to bridge the gap between the academic progress and industrial manufacture,thereby paving the way for accelerating the development of graphenebased material as well as lithium battery industry.

关键词： Lithium batteries Graphene-based materials Academic research Industrial application Development direction

Integrated interconnected porous and lamellar structures realized fast ion/electron conductivity in high-performance lithium-sulfur batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第6期35卷 161-167页

作者： Ya Song Mingxia Zhou Zhu Chen Huali Nie Jiao-Jing Shao Guangmin Zhou School of Materials and Metallurgy Guizhou UniversityGuiyang 550025China Medical college of Guizhou university Guiyang 550025China college of Biological Science and Medical Engineering Donghua UniversityShanghai 201620China shenzhen Geim Graphene Center Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China

The practical application of high-energy-density lithium-sulfur(Li-S)batteries have been highly praised for energy storage devices,while are largely hindered by the“shuttling effect”.Herein,core-shell carbon spheres composed of interlinked porous core and lamellar shell were designed to restrain the polysulfide shuttling.The microporous structure with pore size of around 1 nm effectively trap lithium polysulfides.Furthermore,the interconnected porous core shortens the ion transfer distance and the lamellar carbon shell endows the carbon spheres with fast electron conduction,finally facilitating polysulfide conversion kinetics.Therefore,the Li-S batteries with the carbon spheres as the interlayer show high discharge specific capacity of 1002 m Ah/g at 2 C with 574 m Ah/g remaining after 600 cycles,and high areal capacity of 5.48 m Ah/cm^(2) with sulfur loading of 4.67 mg/cm^(2) at 0.1 C.The corresponding pouch cells also exhibit stable cycling stability with an initial discharge specific capacity of 1082 m Ah/g at 0.1 C.

关键词： Interlayer Shuttle effect Strong adsorption Porous carbon spheres Lithium-sulfur batteries

维普期刊数据库

Femtosecond laser 3D printed micro objective lens for ultrathin fiber endoscope

在线全文

学校读者我要写书评

暂无评论

Fundamental Research 2024年第1期4卷 123-130页

作者： Bozhe Li Changrui Liao Zhihao Cai Jie Zhou Cong Zhao Liqing Jing Jiaqi Wang Cong Xiong Lei Xu Ying Wang Yiping Wang Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education/Guangdong Province College of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen 518060China shenzhen Key Laboratory of Photonic Devices and Sensing Systems for Internet of Things Guangdong and Hong Kong Joint Research Centre for Optical Fibre SensorsShenzhen UniversityShenzhen 518060China School of Electronic and Communication Engineering Shenzhen Polytechnic UniversityShenzhen 518055China

The most important optical component in an optical fiber endoscope is its objective lens.To achieve a high imaging performance level,the development of an ultra-compact objective lens is thus the key to an ultra-thin optical fiber endoscope.In this work,we use femtosecond laser 3D printing to develop a series of micro objective lenses with different optical designs.The imaging resolution and field-of-view performances of these printed micro objective lenses are investigated via both simulations and experiments.For the first time,multiple micro objective lenses with different fields of view are printed on the end face of a single imaging optical fiber,thus realizing the perfect integration of an optical fiber and objective lenses.This work demonstrates the considerable potential of femtosecond laser 3D printing in the fabrication of micro-optical systems and provides a reliable solution for the development of an ultrathin fiber endoscope.

关键词： Femtosecond laser Two-photon polymerization 3D printing Micro objective lens Fiber endoscope