检索结果-南通市图书馆

Superhydrophobic and corrosion-resistant siloxane-modified MgAl-LDHs coatings on magnesium alloy prepared under mild conditions

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 450-463页

作者： Wenxi Zhang Zhangzelong Zhuo Dan Xu Liang Wu Zhihui Xie chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province College of Chemistry and Chemical EngineeringChina West Normal UniversityNanchong 637002China college of materials Science and engineering/National engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China

We have developed a superhydrophobic and corrosion-resistant LDH-W/PFDTMS composite coating on the surface of Mg *** composite comprised a tungstate-intercalated(LDH-W)underlayer that was grown at low temperature(relative to hydrothermal reaction conditions)under atmospheric pressure and an outer polysiloxane layer created from a solution containing perfluorodecyltrimethoxysilane(PFDTMS)using a simple immersion *** successful intercalation of tungstate into the LDH phase and the following formation of the polysiloxane layer were confirmed through X-ray diffraction(XRD),Fourier transform infrared(FTIR)spectroscopy,and X-ray photoelectron spectroscopy(XPS).The corrosion resistance of the LDH-W film,both before and after the PFDTMS modification,was evaluated using electrochemical impedance spectroscopy(EIS),Tafel curves,and immersion *** results showed that Mg coated with LDH-W/PFDTMS exhibited significantly enhanced corrosion protection compared to the unmodified LDHW film,with no apparent signs of corrosion after exposure to 3.5wt%NaCl solution for 15 ***,the LDH-W/PFDTMS coating demonstrated superior superhydrophobicity and self-cleaning properties against water and several common beverages,as confirmed by static contact angle and water-repellency *** results offer valuable insights into preparing superhydrophobic and corrosion-resistant LDH-based composite coatings on Mg alloy surfaces under relatively mild reaction conditions.

关键词： Mg alloy corrosion coating layered double hydroxide

维普期刊数据库

Effects of carbon content on the microstructure and tensile properties of a low-density steel

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu Fan Shuyong Jiang Zhongwu Zhang Key Laboratory of Superlight materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

维普期刊数据库

Synergistically enhanced ORR and HER performance on Co-N-C coupled in-situ generated PtCo intermetallic

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 721-729页

作者： Guanyu Luo Min Song Lulu An Xiao Huang Qian Zhang Chenhao Zhang Tao Shen Shuang Wang Deli Wang Key Laboratory of material Chemistry for Energy Conversion and Storage (Huazhong University of Science and Technology) Ministry of Education School of Chemistry and Chemical Engineering Huazhong University of Science and Technology

Integrating multi-scale sites in a composite catalyst is vital to realize efficient ***,a synergistic composite catalyst consisting of Co atomic sites and in-situ generated PtCo intermetallic compounds （IMCs）(o-PtCo@CoNC) is proposed through Co pre-anchoring and subsequent impregnation-reduction *** loading of Co atoms provides a chance for in-situ generating PtCo ordered intermetallic *** remaining Co single atoms and PtCo IMCs construct synergistic electrocatalytic *** from the ordered structure,synergistic effect of Pt Co IMCs and Co single atoms,o-PtCo@CoNC exhibits excellent electrocatalytic performance for oxygen reduction reaction （ORR） and hydrogen evolution reaction （HER） with mass activity of 1.21 A mgPt-1（at 0.9 V） and5.70 A mgPt-1（at an overpotential of 100 mV）,***,o-PtCo@CoNC delivers negligible loss of half-wave potential and overpotential during long-term stability test in acid solutions,with 13 mV decay after 50,000 potential cycles for ORR and a 2.7 mV decay after 20,000 potential cycles for *** integration strategy of single-atomic sites coupled IMCs paves the way for enhancing the activity and durability of Pt-based electrocatalysts.

关键词： Electrolytic reduction

Identifying the dynamic behaviors in complete reconstruction of Co-based complex precatalysts during electrocatalytic oxygen evolution

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 226-233页

作者： Jingfang Zhang Danyang Wu Linke Cai Youluan Lu Fanpeng Cheng Lijuan Shi Qun Yi Yao Liu Yi Huang Key Laboratory of Green chemical engineering Process of Ministry of Education Engineering Research Center of Phosphorus Resources Development and Utilization of Ministry of Education Hubei Key Laboratory of Novel Reactor and Green Chemical Technology School of Chemical Engineering & Pharmacy Wuhan Institute of Technology Key Laboratory of Pesticide & chemical Biology of Ministry of Education Engineering Research Center of Photoenergy Utilization for Pollution Control and Carbon Reduction of Ministry of Education College of Chemistry Central China Normal University college of materials Science and engineering Fuzhou University

Transition metal-based nanomaterials have emerged as promising electrocatalysts for oxygen evolution reaction（OER）. Considerable research efforts have shown that self-reconstruction occurs on these nanomaterials under operating conditions of OER process. However, most of them undergo incomplete reconstruction with limited thickness of reconstruction layer, leading to low component utilization and arduous exploration of real catalytic mechanism. Herein, we identify the dynamic behaviors in complete reconstruction of Co-based complexes during OER. The hollow phytic acid（PA） cross-linked CoFe-based complex nanoboxes with porous nanowalls are designed because of their good electrolyte penetration and mass transport ability, in favor of the fast and complete reconstruction. A series of experiment characterizations demonstrate that the reconstruction process includes the fast substitution of PA by OH-to form Co（Fe）(OH)xand subsequent potential-driven oxidation to Co（Fe）OOH. The obtained CoFeOOH delivers a low overpotential of 290 mV at a current density of 10 mA cm-2and a long-term *** experiment results together with theory calculations reveal that the Fe incorporation can result in the electron rearrangement of reconstructed CoFeOOH and optimization of their electronic structure,accounting for the enhanced OER activity. The work provides new insights into complete reconstruction of metal-based complexes during OER and offers guidelines for rational design of high-performance electrocatalysts.

关键词： Complete reconstruction Co-based complex Precatalysts Oxygen evolution reaction

From waste to wealth:Coal tar residue derived carbon materials as low-cost anodes for potassium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 464-475页

作者： Zhonghua Lu Jun Shen Xin Zhang Lingcong Chao Liang Chen Ding Zhang Tao Wei Shoudong Xu college of chemical engineering and Technology Taiyuan University of TechnologyTaiyuan 030024China college of Chemistry Taiyuan University of TechnologyTaiyuan 030024China School of chemical engineering and Pharmacy Wuhan Institute of TechnologyWuhan 430205China School of Energy and Power Jiangsu University of Science and TechnologyZhenjiang 212003China

Carbon materials are widely recognized as highly promising electrode materials for various energy storage system *** tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilization,are crucially important for the development of a more sustainable *** this study,we employed a straightforward direct carbonization method within the temperature range of 700-1000℃to convert the worthless solid waste CTR into economically valuable carbon materials as anodes for potassium-ion batteries(PIBs).The effect of carbonization temperature on the microstructure and the potassium ions storage properties of CTR-derived carbons(CTRCs)were systematically explored by structural and morphological characterization,alongside electrochemical performances *** on the co-regulation between the turbine layers,crystal structure,pore structure,functional groups,and electrical conductivity of CTR-derived carbon carbonized at 900℃(CTRC-900H),the electrode material with high reversible capacity of 265.6m Ah·g^(-1)at 50 m A·g^(-1),a desirable cycling stability with 93.8%capacity retention even after 100 cycles,and the remarkable rate performance for PIBs were ***,cyclic voltammetry(CV)at different scan rates and galvanostatic intermittent titration technique(GITT)have been employed to explore the potassium ions storage mechanism and electrochemical kinetics of *** indicate that the electrode behavior is predominantly governed by surface-induced capacitive processes,particularly under high current densities,with the potassium storage mechanism characterized by an“adsorption-weak intercalation”*** work highlights the potential of CTR-based carbon as a promising electrode material category suitable for high-performance PIBs electrodes,while also provides valuable insights into the new avenues for the high value-added utilization of CTR.

关键词： coal tar residue carbon materials anode potassium-ion batteries high value-added

维普期刊数据库

Universal design of three-dimensional porous graphene-iron based promotors for kinetically rationalized lithium-sulfur chemistry

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 192-200页

作者： Hua Gao Yunfeng Zhang Menglei Wang Ruoxuan Yang Shuai Feng Xuan Cao Yaping Zhang Zhongyuan Lu Yingze Song State Key Laboratory of Environment-Friendly Energy materials School of Materials and Chemistry Southwest University of Science and Technology School of material Science and engineering Henan University of Technology college of Chemistry and chemical engineering Taishan University

Lithium-sulfur （Li-S） batteries are widely deemed to be one of the most potential candidates for future secondary batteries because of their remarkable energy ***,notorious polysulfide shuttling and retarded sulfur reaction kinetics pose significant obstacles to the further application of Li-S *** rationally designed highly active electrocatalysts can facilitate polysulfide conversion,the universal and scalable synthesis strategies need to be ***,a universal synthetic strategy to construct a series of three-dimensional （3D） porous graphene-iron （3DGr-Fe） based electrocatalysts involving 3DGr-FeP,3DGr-Fe3C,and 3DGr-Fe3Se4is exploited for manipulating the Li-S redox *** has been observed that the implementation of a 3D porous Gr architecture leads to the well-designed conductive networks,while the uniformly dispersed iron nanoparticles introduce an abundance of active sites,fostering the lithium polysulfide conversion,thereby bolstering the overall electrochemical *** Li-S battery with the 3DGr-Fe based electrocatalyst exhibits remarkable capacity retention of 94.8%upon 100 times at 0.2 ***,the soft-packaged Li-S pouch cell based on such a 3DGr-Fe electrocatalyst delivers superior capacity of 1060.71 mA h g-1and guarantees for the continuous 30 min work of fan *** investigation gives comprehensive insights into the design,synthesis,and mechanism of 3DGr-Fe based electrocatalysts with high activity toward efficient and durable Li-S batteries.

关键词： Lithium-sulfur battery Universal synthesis 3D graphene-iron based promotor Electrocatalysis

Mechanistic insight into the synergy between nickel single atoms and nanoparticles on N-doped carbon for electroreduction of CO2

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 327-336页

作者： Mingdong Sun Wenwen Guan Cailing Chen Chao Wu Xiaoling Liu Biao Meng Tao Chen Yu Han Jun Wang Shibo Xi Yu Zhou State Key Laboratory of materials-Oriented chemical engineering College of Chemical Engineering Nanjing Tech University Advanced Membranes and Porous materials Center Physical Sciences and Engineering Division King Abdullah University of Science and Technology Institute of Sustainability for chemicals Energy and Environment A*STAR (Agency for Science Technology and Research) college of materials Science and engineering Sichuan University

The synergy of single atoms （SAs） and nanoparticles （NPs） has demonstrated great potential in promoting the electrocatalytic carbon dioxide reduction reaction （CO2RR）;however,the rationalization of the SAs/NPs proportion remains one challenge for the catalyst ***,a Ni2+-loaded porous poly（ionic liquids）(PIL) precursor synthesized through the free radical self-polymerization of the ionic liquid monomer,1-allyl-3-vinylimidazolium chloride,was pyrolyzed to prepare the Ni,N co-doped carbon materials,in which the proportion of Ni SAs and NPs could be facilely modulated by controlling the annealing *** catalyst Ni-NC-1000 with a moderate proportion of Ni SAs and NPs exhibited high efficiency in the electrocatalytic conversion of CO2into *** Ni K-edge X-ray absorption near-edge structure （XANES） spectra and theoretical calculations were conducted to gain insight into the synergy of Ni SAs and *** charge transfer from Ni NPs to the surrounding carbon layer and then to the Ni SAs resulted in the electron-enriched Ni SAs active *** the electroreduction of CO2,the coexistence of Ni SAs and NPs strengthened the CO2activation and the affinity towards the key intermediate of*COOH,lowering the free energy for the potential-determining*CO2→*COOH step,and therefore promoted the catalysis efficiency.

关键词： Single atom catalyst Synergy effect Carbon catalyst Electrocatalysis

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won Department of chemical and Biological engineering Korea University Department of chemical engineering (Integrated process) Kyung Hee University Department of chemical engineering and materials Science Ewha Womans University Department of chemical engineering Pukyong National University Resources engineering Plant Research Department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Biorefinery Carbon mitigation Climate change Global warming Lignin utilization Bioeconomy

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 702-709页

作者： Yiman Gu Yanchao Zhang Zhanyu Li Yijia Lei Baozeng Sun Xiaoyu Yu Zhe Wang college of Chemistry and Life Science Changchun University of Technology college of chemical engineering Changchun University of Technology School of materials Science and engineering Changchun University of Technology Key Laboratory of Advanced Functional Polymer Membrane materials of Jilin Province

The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes （AEMs） has been widely ***,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains *** strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being ***,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone （x=40,50,and 60） into the main chain of poly（p-terphenylene isatin）.Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation *** results show that PTI-PTF50-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of *** has an ionic conductivity of 133.83 mS cm-1at 80°*** addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of *** cell polarization curve based on PTI-PTF50-NOH shows a power density of 734.76 mW cm-2at a current density of 1807.7 mA cm-2.

关键词： Anion exchange membranes Poly(p-terphenylene isatin) Hydrophilic-hydrophobic phase separation Fluorinated group