检索结果-南通市图书馆

Journal of Energy Chemistry 2025年第1期100卷 215-225页

作者： Jiaye Li Shuang Pan Yihuang Chen Qiong Liu College of Chemistry and Materials Engineering Wenzhou University Guangdong Provincial Key Laboratory of Chemical Measurement and Emergency Test Technology (china) Institute of Analysis Guangdong Academy of Sciences (China National Analytical CenterGuangzhou)

Photocatalytic oxygen reduction for hydrogen peroxide （H2O2） synthesis presents a green and costeffective production ***,achieving highly selective H2O2synthesis remains challenging,necessitating precise control over free radical reaction pathways and minimizing undesirable oxidative ***,we report for the visible light-driven simultaneous co-photocatalytic reduction of O2to H2O2and oxidation of biomass using the atomic rubidium-nitride modified carbon nitride（CNRb）.The optimized CNRb catalyst demonstrates a record photoreduction rate of 8.01 mM h-1for H2O2generation and photooxidation rate of 3.75 mM h-1for furfuryl alcohol to furoic acid,achieving a remarkable solar-to-chemical conversion （SCC） efficiency of up to 2.27%.Experimental characterizations and DFT calculation disclosed that the introducing atomic Rb–N configurations allows for the high-selective generation of superoxide radicals while suppressing hydroxyl free radical *** is because the Rb–N serves as the new alternative site to perceive a stronger connection position for O2adsorption and reinforce the capability to extract protons,thereby triggering a high selective redox product *** study holds great potential in precisely regulating reactive radical processes at the atomic level,thereby paving the way for efficient synthesis of H2O2coupled with biomass valorization.

关键词： Free radical reactions

Study of the Transport Behavior of Multispherical Proppant in Intersecting Fracture Based on Discrete Element Method

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2025年第1期122卷 185-201页

作者： Chengyong Peng JianshuWu Mao Jiang Biao Yin Yishan Lou CNOOC Research institute Company Limited Beijing100028China School of Petroleum Engineering Yangtze UniversityWuhan430100China Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering(Yangtze University) Wuhan430100China

To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on *** reservoir production parameters and the discrete elementmethod,multispherical proppants were ***,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting *** indicate that turbulent kinetic energy is an intrinsic factor affecting proppant ***,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture *** to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.

关键词： Hydraulic fracturing discrete element method proppant sphericity CFD-DEM

Emerging trends in the selective production of value-added aromatics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science china Chemistry 2025年第1期68卷 15-20页

作者： Yuchao Wu Houliang Dai Weisheng Yang Yaxing Li Lichen Liu Petrochemical Research institute Company Limited China National Petroleum Corporation Engineering Research Center of Advanced Rare Earth Materials Department of Chemistry Tsinghua University

1 Introduction Aromatics (mainly benzene, toluene, and xylenes, BTX) are essential intermediates in the chemical industry. They are employed in the synthesis of a broad spectrum of chemicals and materials, e.g., various polymers, plastics, resins, solvents, dyes, pharmaceuticals [1]. The manufacturing pathway of BTX mainly includes petroleum reforming of naphtha, coal-to-aromatics, methanol-to-aromatics [2].

关键词：

Optimizing Fine-Tuning in Quantized Language Models:An In-Depth Analysis of Key Variables

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2025年第1期82卷 307-325页

作者： Ao Shen Zhiquan Lai Dongsheng Li Xiaoyu Hu National Key Laboratory of Parallel and Distributed Computing National University of Defense TechnologyChangsha410073China Strategic Assessments and Consultation institute Academy of Military ScienceBeijing100091China

Large-scale Language Models(LLMs)have achieved significant breakthroughs in Natural Language Processing(NLP),driven by the pre-training and fine-tuning *** this approach allows models to specialize in specific tasks with reduced training costs,the substantial memory requirements during fine-tuning present a barrier to broader ***-Efficient Fine-Tuning(PEFT)techniques,such as Low-Rank Adaptation(LoRA),and parameter quantization methods have emerged as solutions to address these challenges by optimizing memory usage and computational *** these,QLoRA,which combines PEFT and quantization,has demonstrated notable success in reducing memory footprints during fine-tuning,prompting the development of various QLoRA *** these advancements,the quantitative impact of key variables on the fine-tuning performance of quantized LLMs remains *** study presents a comprehensive analysis of these key variables,focusing on their influence across different layer types and depths within LLM *** investigation uncovers several critical findings:(1)Larger layers,such as MLP layers,can maintain performance despite reductions in adapter rank,while smaller layers,like self-attention layers,aremore sensitive to such changes;(2)The effectiveness of balancing factors depends more on specific values rather than layer type or depth;(3)In quantization-aware fine-tuning,larger layers can effectively utilize smaller adapters,whereas smaller layers struggle to do *** insights suggest that layer type is a more significant determinant of fine-tuning success than layer depth when optimizing quantized ***,for the same discount of trainable parameters,reducing the trainable parameters in a larger layer is more effective in preserving fine-tuning accuracy than in a smaller *** study provides valuable guidance for more efficient fine-tuning strategies and opens avenues for further research into optimizing LLM

关键词： Large-scale Language Model Parameter-Efficient Fine-Tuning parameter quantization key variable trainable parameters experimental analysis

Effect of Bi/Si Ratio of BiBSi Glass on Its Structure, Properties and Laser Sealing Shear Strength for Vacuum Glazing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 13-24页

作者： LIU Wei JIAO Jinxu LUO Dusha ZHOU Junjie SHI Lifen WANG Weiwei LI Changqing WANG Peng XIONG Dehua LI Hong State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan 430070China Silica-Based Materials Laboratory of Anhui Province CNBM Research Institute for Advanced Glass Materials Group Co.LtdBengbu 233018China State Key Laboratory of Advanced Technology for Float Glass CNBM Research Institute for Advanced Glass Materials Group Co.LtdBengbu 233018China

The low-melting glass of Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi)system was used for the first time for laser sealing of vacuum *** the condition of constant boron content,how the structure and properties vary with Bi/Si ratio in low-melting glass was *** addition,the relationships between laser power,low-melting glass solder with different Bi/Si ratios and laser sealing shear strength were *** results show that a decrease in the Bi/Si ratio can cause a contraction of the glass network of the low-melting glass,leading to an increase of its characteristic temperature and a decrease of its coefficient of thermal *** laser sealing,the copper ions in the low-melting glass play an endothermic role.A change in the Bi/Si ratio will affect the valence state transition of the copper ions in the low-melting *** absorbance of the low-melting glass does not follow the expected correlation with the Bi/Si ratio,but shows a linear correlation with the content of divalent copper *** greater the concentration of divalent copper ions,the greater the absorbance of the low-melting glass,and the lower the laser power required for laser *** shear strength of the low melting glass solder after laser sealing was tested,and it was found that the maximum shear strength of Z1 glass sample was the highest up to 2.67 MPa.

关键词： Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi) Bi/Si ratio low-melting glass laser sealing vacuum glazing

Morphology engineering of ZnO micro/nanostructures under mild conditions for optoelectronic application

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 498-503页

作者： Liang Chu Haoyu Shen Hudie Wei Hongyu Chen Guoqiang Ma Wensheng Yan institute of Carbon Neutrality and New Energy&School of Electronics and Information Hangzhou Dianzi UniversityHangzhou 310018China School of Applied Physics and Materials Wuyi UniversityJiangmen 529020China

Zinc oxide(ZnO)serves as a crucial functional semiconductor with a wide direct bandgap of approximately 3.37 *** reaction is commonly used in the synthesis of ZnO micro/nanostructures,given its low cost,simplicity,and easy ***,ZnO morphology engineering has become desirable through the alteration of minor conditions in the reaction process,particularly at room *** this work,ZnO micro/nanostructures were synthesized in a solution by varying the amounts of the ammonia added at low temperatures(including room temperature).The formation of Zn^(2+)complexes by ammonia in the precursor regulated the reaction rate of the morphology engineering of ZnO,which resulted in various structures,such as nanoparticles,nanosheets,microflowers,and single ***,the obtained ZnO was used in the optoelectronic application of ultraviolet detectors.

关键词： morphology engineering low temperature ZnO nanosheets microflowers ultraviolet detector

Industrial Control Anomaly Detection Based on Distributed Linear Deep Learning

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2025年第1期82卷 1129-1150页

作者： Shijie Tang Yong Ding Huiyong Wang School of Computer Science and Information Security Guilin University of Electronic TechnologyGuilin541004China School of Electronic Engineering and Automation Guilin University of Electronic TechnologyGuilin541004China Guangxi Engineering Research Center of Industrial Internet Security and Blockchain Guilin University of Electronic TechnologyGuilin541004China institute of Cyberspace Technology HKCT Institute for Higher EducationHong Kong999077China School of Mathematics&Computing Science Guilin University of Electronic TechnologyGuilin541004China

As more and more devices in Cyber-Physical Systems(CPS)are connected to the Internet,physical components such as programmable logic controller(PLC),sensors,and actuators are facing greater risks of network attacks,and fast and accurate attack detection techniques are *** key problem in distinguishing between normal and abnormal sequences is to model sequential changes in a large and diverse field of time *** address this issue,we propose an anomaly detection method based on distributed deep *** method uses a bilateral filtering algorithm for sequential sequences to remove noise in the time series,which can maintain the edge of discrete *** use a distributed linear deep learning model to establish a sequential prediction model and adjust the threshold for anomaly detection based on the prediction error of the validation *** method can not only detect abnormal attacks but also locate the sensors that cause *** conducted experiments on the Secure Water Treatment(SWAT)and Water Distribution(WADI)public *** experimental results show that our method is superior to the baseline method in identifying the types of attacks and detecting efficiency.

关键词： Anomaly detection CPS deep learning MLP(multi-layer perceptron)

Design of multifunctional interfaces on ceramic solid electrolytes for high-performance lithium-air batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green Energy & Environment 2025年第1期10卷 183-192页

作者： Yunxin Shi Ziyang Guo Changhong Wang Mingze Gao Xiaoting Lin Hui Duan Yonggang Wang Xueliang Sun College of Energy Material and Chemistry College of Chemistry and Chemical EngineeringInner Mongolia UniversityHohhot010021China Department of Mechanical and Materials Engineering Western UniversityLondonONN6A 5B9Canada Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New EnergyiChEM(Collaborative Innovation Center of Chemistry for Energy Materials)Fudan UniversityShanghai200433China Eastern institute for Advanced Study Eastern Institute of TechnologyNingboZhejiang315100China

High-energy-density lithium(Li)–air cells have been considered a promising energy-storage system,but the liquid electrolyte-related safety and side-reaction problems seriously hinder their *** address these above issues,solid-state Li–air batteries have been widely ***,many commonly-used solid electrolytes generally face huge interface impedance inLi–air cells and also showpoor stability towards ambient air/Li ***,we fabricate a differentiating surface-regulated ceramic-based composite electrolyte(DSCCE)by constructing disparately LiI-containing polymethyl methacrylate(PMMA)coating and Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)layer on both sides of Li_(1.5)Al_(0.5)Ge_(1.5)(PO_(4))_(3)(LAGP).The cathode-friendly LiI/PMMA layer displays excellent stability towards superoxide intermediates and also greatly reduces the decomposition voltage of discharge products in Li–air ***,the anode-friendly PVDF-HFP coating shows low-resistance properties towards ***,Li dendrite/passivation derived from liquid electrolyte-induced side reactions and air/I-attacking can be obviously suppressed by the uniformand compact composite *** a result,the DSCCE-based Li–air batteries possess high capacity/low voltage polarization(11,836mAh g^(-1)/1.45Vunder 500mAg^(-1)),good rate performance(capacity ratio under 1000mAg^(-1)/250mAg^(-1) is 68.2%)and longterm stable cell operation(~300 cycles at 750 mA g^(-1) with 750 mAh g^(-1))in ambient air.

关键词： Li-air batteries Li_(1.5)Al_(0.5)Ge_(1.5)(PO_(4))_(3) Polymers Composite electrolyte Ambient air

Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 311-324页

作者： Qian Yin Fan Wen Zhigang Tao Hai Pu Tianci Deng Yaoyao Meng Qingbin Meng Hongwen Jing Bo Meng Jiangyu Wu State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering China University of Mining and TechnologyXuzhou 221116China State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines Anhui University of Science and TechnologyHuainan 232001China State Key Laboratory for Geomechanics&Deep Underground Engineering China University of Mining and Technology(Beijing)Beijing 100083China Key Laboratory of Xinjiang Coal Resources Green Mining Ministry of EducationXinjiang Institute of EngineeringUrumqi 830023China

The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious ***,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of *** mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically *** results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,***,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the ***σ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite ***ε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse *** increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.

关键词： cemented gangue backfill materials particle size distribution true triaxial compression test carbon nanotubes mechanical properties failure modes

MXene Hybridized Polymer with Enhanced Electromagnetic Energy Harvest for Sensitized Microwave Actuation and Self‑Powered Motion Sensing

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 265-279页

作者： Yu‑Ze Wang Yu‑Chang Wang Ting‑Ting Liu Quan‑Liang Zhao Chen‑Sha Li Mao‑Sheng Cao School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081People’s Republic of China School of Materials Science and Engineering Peking UniversityBeijing 100871People’s Republic of China School of Mechanical and Material Engineering North China University of TechnologyBeijing 100144People’s Republic of China Key Laboratory of Functional Inorganic Material Chemistry Ministry of Education of the People’s Republic of ChinaHeilongjiang UniversityHarbin 150080People’s Republic of China

Polymeric microwave actuators combining tissue-like softness with programmablemicrowave-responsive deformation hold great promise for mobile intelligentdevices and bionic soft robots. However, their application is challenged by restricted electromagneticsensitivity and intricate sensing coupling. In this study, a sensitized polymericmicrowave actuator is fabricated by hybridizing a liquid crystal polymer with Ti3C2Tx(MXene). Compared to the initial counterpart, the hybrid polymer exhibits unique spacechargepolarization and interfacial polarization, resulting in significant improvements of230% in the dielectric loss factor and 830% in the apparent efficiency of electromagneticenergy harvest. The sensitized microwave actuation demonstrates as the shortenedresponse time of nearly 10 s, which is merely 13% of that for the initial shape memory polymer. Moreover, the ultra-low content of MXene (upto 0.15 wt%) benefits for maintaining the actuation potential of the hybrid polymer. An innovative self-powered sensing prototype that combinesdriving and piezoelectric polymers is developed, which generates real-time electric potential feedback (open-circuit potential of ~ 3 mV) duringactuation. The polarization-dominant energy conversion mechanism observed in the MXene-polymer hybrid structure furnishes a new approachfor developing efficient electromagnetic dissipative structures and shows potential for advancing polymeric electromagnetic intelligent devices.

关键词： Microwave absorption Electromagnetic response Energy harvest Self-sensing Soft actuator