检索结果-南通市图书馆

Bidirectional rotating direct-current triboelectric nanogenerator with self-adaptive mechanical switching for harvesting reciprocating motion

引用

International Journal of Extreme manufacturing 2024年第4期6卷 324-335页

作者： Donghan Lee Joonmin Chae Sumin Cho Jong Woo Kim Awais Ahmad Mohammad Rezaul Karim Moonwoo La Sung Jea Park Dongwhi Choi Department of mechanical Engineering(Integrated Engineering Program) Kyung Hee University1732 Deogyeong-daeroYonginGyeonggi 17104Republic of Korea Department of Chemistry University of LahoreLahorePakistan Department of mechanical Engineering College of EngineeringKing Saud UniversityRiyadh 11421Saudi Arabia School of mechanical Engineering Korea University of Technology and Education1600 Chungjeol-roCheonanChungnam 31253Republic of Korea

Amid the growing interest in triboelectric nanogenerators(TENGs)as novel energy-harvesting devices,several studies have focused on direct current(DC)TENGs to generate a stable DC output for operating electronic ***,owing to the working mechanisms of conventional DC TENGs,generating a stable DC output from reciprocating motion remains a ***,we propose a bidirectional rotating DC TENG(BiR-TENG),which can generate DC outputs,regardless of the direction of rotation,from reciprocating *** distinct design of the BiR-TENG enables the mechanical rectification of the alternating current output into a rotational-direction-dependent DC ***,it allows the conversion of the rotational-direction-dependent DC output into a unidirectional DC output by adapting the configurations depending on the rotational *** to these tailored design strategies and subsequent optimizations,the BiR-TENG could generate an effective unidirectional DC *** of the BiR-TENG for the reciprocating motions of swinging doors and waves were demonstrated by harnessing this *** study demonstrates the potential of the BiR-TENG design strategy as an effective and versatile solution for energy harvesting from reciprocating motions,highlighting the suitability of DC outputs as an energy source for electronic devices.

关键词： direct-current triboelectric nanogenerator mechanical rectification self-adaptive mechanical design harvesting reciprocation motion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental evaluation of mechanical compression of lattice trusses made with Ti6Al4V for aerospace use

引用

Chinese Journal of Aeronautics 2024年第5期37卷 520-532页

作者： Carlo Giovanni FERRO Sara VARETTI Paolo MAGGIORE Department of mechanical and Aerospace Engineering Politecnico di TorinoCorso Duca degli AbruzziTorino 10124Italy

Lattice structures are three-dimensional structures composed of repeated geometrical shapes with multiple interconnected nodes,providing high strength-to-weight ratios,customizable properties,and efficient use of materials.A smart use of materials leads to reduced fuel consumption and lower operating costs,making them highly desirable for aircraft ***,the customizable properties of lattice structures allow for tailoring to specific design requirements,leading to improved performance and safety for *** advantages make lattice structures an important focus for research and development in the aviation *** paper presents an experimental evaluation of the mechanical compression properties of lattice trusses made with Ti6Al4V,designed for use in an anti-ice *** truss structures were manufactured using additive manufacturing techniques and tested under compressive loads to determine mechanical *** showed that lattice trusses exhibited high levels of compressive strength,making them suitable for use in applications where mechanical resistance and durability are critical,such as in anti-ice *** also highlight the potential of additive manufacturing techniques for the fabrication of lattice trusses with tailored mechanical *** study provides valuable insights into the mechanical behavior of Ti6Al4V lattice trusses and their potential applications in anti-ice systems,as well as other areas where high strength-to-weight ratios are *** results of this research contribute to the development of lightweight,efficient,and durable anti-ice systems for use in aviation and other industries.

关键词： Additive manufacturing(AM) Selective Laser Sintering(SLM) Anti ice systems Lattice structures Aircraft on board systems design of Experiments(DOE)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in aerospace community:a comparative analysis

引用

International Journal of Extreme manufacturing 2024年第2期6卷 190-271页

作者： Guolong Zhao Biao Zhao Wenfeng Ding Lianjia Xin Zhiwen Nian Jianhao Peng Ning He Jiuhua Xu College of mechanical and Electrical Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016People’s Republic of China

The aerospace community widely uses difficult-to-cut materials,such as titanium alloys,high-temperature alloys,metal/ceramic/polymer matrix composites,hard and brittle materials,and geometrically complex components,such as thin-walled structures,microchannels,and complex *** machining is the main material removal process for the vast majority of aerospace ***,many problems exist,including severe and rapid tool wear,low machining efficiency,and poor surface *** energy-assisted mechanical machining is a hybrid process that uses nontraditional energies(vibration,laser,electricity,etc)to improve the machinability of local materials and decrease the burden of mechanical *** provides a feasible and promising method to improve the material removal rate and surface quality,reduce process forces,and prolong tool ***,systematic reviews of this technology are lacking with respect to the current research status and development *** paper reviews the recent progress in the nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in the aerospace *** addition,this paper focuses on the processing principles,material responses under nontraditional energy,resultant forces and temperatures,material removal mechanisms,and applications of these processes,including vibration-,laser-,electric-,magnetic-,chemical-,advanced coolant-,and hybrid nontraditional energy-assisted mechanical ***,a comprehensive summary of the principles,advantages,and limitations of each hybrid process is provided,and future perspectives on forward design,device development,and sustainability of nontraditional energy-assisted mechanical machining processes are discussed.

关键词： difficult-to-cut materials geometrically complex components nontraditional energy mechanical machining aerospace community

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

design and parameter optimization of air-suction wheel type of seedmetering device with elastic pad for maize

引用

International Journal of Agricultural and Biological Engineering 2024年第4期17卷 116-127页

作者： Yuhuan Sun Junhai Guo Linrong Shi College of mechanical and Electrical Engineering Gansu Agricultural UniversityLanzhou 730070China College of mechanical and Electrical Engineering Lanzhou University of TechnologyLanzhou 730070China

Due to the maize growing agronomy requires ground covered by mulch film in the arid zones of the China Northwest region,the seed-metering device must roll over,break the film,and then throw seeds into ***,the uneven ground can cause the seed-metering device to shake,reducing seed-metering *** improve the adaptability for different shapes of maize seeds,a air suction wheel type seed-metering device with elastic pad was developed for better seed extraction and bump ***,the advantages and influencing factors of the elastic pad were analyzed through four processes of metering ***,the velocity distributions of six diameters of the suction hole are compared to determine the range with ***,a one-factor experiment was conducted to analyze the pattern of the factors(the seed layer height,the critical vacuum,the rotational speed of the seed disk,and the suction hole diameter)influencing the metering seed ***,a five-level quadratic rotation orthogonal design was used to optimize the *** show that the optimal values are that the seed layer height is 40 mm,and the critical vacuum is 2.85 kPa,and the rotational speed of the seed disk is 20.1 r/*** validation experiment resulted in a 93.79%qualified index,with a 4.02%missing index and a 2.19%multiple index.

关键词： maize seeds seed-metering device with air suction elastic suction parameter optimization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Wearable multilead ECG sensing systems using on-skin stretchable and breathable dry adhesives

引用

Bio-design and manufacturing 2024年第2期7卷 167-180页

作者： Yingxi Xie Longsheng Lu Wentao Wang Huan Ma School of mechanical and Automotive Engineering South China University of TechnologyGuangzhou 510641China College of Automotive and mechanical Engineering Changsha University of Science and TechnologyChangsha 410114China Guangdong Cardiovascular Institute Guangdong Provincial People’s HospitalGuangzhou 510080China

Electrocardiogram(ECG)monitoring is used to diagnose cardiovascular diseases,for which wearable electronics have attracted much attention due to their lightweight,comfort,and long-term *** study developed a wearablemultilead ECG sensing system with on-skin stretchable and conductive silver(Ag)-coated fiber/silicone(AgCF-S)dry *** and normal adhesion to pigskin(0.43 and 0.20 N/cm2,respectively)was optimized by the active control of fiber density and mixing ratio,resulting in close contact in the electrode–skin *** breathableAgCF-S dry electrodewas nonallergenic after continuous fit for 24 h and can be reused/cleaned(>100 times)without loss of *** AgCF encapsulated inside silicone elastomers was overlapped to construct a dynamic network under repeated stretching(10%strain)and bending(90°)deformations,enabling small intrinsic impedance(0.3,0.1 Hz)and contact impedance variation(0.7 k)in high-frequency vibration(70 Hz).All hard/soft modules of the multilead ECG system were integrated into lightweight clothing and equipped with wireless transmission for signal *** synchronous acquisition of I–III,aVR,aVL,aVF,and V4 lead data,the multilead ECG sensing system was suitable for various scenarios,such as exercise,rest,and sleep,with extremely high signal-to-noise ratios.

关键词： Multilead electrocardiogram Dry electrodes Wearable electronics Wireless transmission

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Kinematical system of breadth cam profile design

引用

Journal of Central South University 2011年第2期18卷 451-457页

作者： SHIN Joong-ho 李琳 YANG Hyun-dai KWON Soon-man Department of mechanical design & manufacturing Changwon National University

The design solutions for breadth cam mechanism was presented. The main topics of the shape design for breadth cam was to calculate the coordinate at each contact point to determine the cam profile. The proposed method according to velocity and geometric relationships of instant velocity centers can easily determine each contact point at any instant moment. The cam profile was defined by contouring of the contact points. And also a program was developed by using Microsoft Visual C++ program,which can quickly and easily draw a 2D cam profile through the displacement diagram. Finally,the program was used to confirm the accuracy on the breadth cam profile design by computer animation graphically.

关键词： cam profile breadth cam reciprocating follower oscillating follower instant velocity center

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dual cycloid gear mechanism for automobile safety pretensioners

引用

Journal of Central South University 2012年第2期19卷 365-373页

作者： SHIN Joong-ho KIM Chang-hyun YUN Pyeong-hwa KWON Soon-man Department of mechanical design and manufacturing Changwon National University

The most conventional vehicle pretensioner system consists of an internal gear pair with involute teeth. However, it has been well known that the corresponding gear pairs are relatively weak under the situation of impact loadings. To improve this phenomenon, a new pretensioning gear system with cycloid teeth rather than the involute ones was proposed, and dual cycloidal gear mechanisms were designed for satisfying geometric constraints and dynamic loading conditions. The simulations of the prototypes were conducted by LS-DYNA program and the experiments for a prototype were performed for a dynamic model with impact loading devices. The results show that the better operation and the smoother motion are confirmed in the proposed cycloidal gear system rather than the conventional one without interferences between gear teeth under the impact of a crash.

关键词： seat belt pretensioner internal gear pairs involute gear dual cycloid gear

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Efficient measurement and optical proximity correction modeling to catch lithography pattern shift issues of arbitrarily distributed hole layer

引用

Frontiers of mechanical Engineering 2024年第4期19卷 45-54页

作者： Yaobin FENG Jiamin LIU Zhiyang SONG Hao JIANG Shiyuan LIU State Key Laboratory of Inteligent manufacturing Equipment and Technology Huazhong University of Science and TechnologyWuhan 430074China Optics Valley Laboratory Wuhan 430074China

With the continued shrinking of the critical dimensions(CDs)of wafer patterning,the requirements for modeling precision in optical proximity correction(OPC)increase *** requirement extends beyond CD controlling accuracy to include pattern alignment accuracy because misalignment can lead to considerable overlay and metal-via coverage issues at advanced nodes,affecting process window and *** paper proposes an efficient OPC modeling approach that prioritizes pattern-shift-related elements to tackle the issue *** method integrates careful measurement selection,the implementation of pattern-shift-aware structures in design,and the manipulation of the cost function during model tuning to establish a robust *** experiments are performed on a via layer fabricated using a negative tone *** demonstrate that pattern shifts can be constrained within a range of+1 nm,remarkably better than the original range of±3 ***,simulations reveal notable differences between post OPC and original masks when considering pattern shifts at locations sensitive to this *** validation confirms the accuracy of the proposed modeling approach,and a firm consistency is observed between the simulation results and experimental data obtained from actual design structures.

关键词： computational lithography optical proximity correction modeling pattern shift metrology

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Lightweight design of 45000r/min spindle using full factorial design and extreme vertices design methods

引用

Journal of Central South University 2011年第1期18卷 153-158页

作者： PARK Seong-jin LEE Choon-man HWANG Young-kug Department of mechanical design and manufacturing Engineering Changwon National University

Factors for determining the spindle size are the shaft diameter, positions of bearing and motor, and entire length of the spindle. Then, it is important to find the assembling of the optimal design variables, which satisfy the stiffimss and rotational speed required to the spindle. A general full factorial design method was used to verify some factors that affect the natural frequency of a spindle. It is verified that the shorter shaft length and bearing span length represent the higher natural frequency, and there are some effects according to the change in the levels of factors. The detailed spindle dimension is determined by applying an EVD method, which can define the optimal bearing position through considering the limiting condition. Based on the estimated regression model, the optimal spindle size and bearing distance that can improve the primary natural frequency are obtained, and the influence of design factors on the natural frequency is also analyzed.

关键词： high-speed spindle extreme vertices design natural frequency lightweight design full factorial design

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of analysis model for geometric error in turning processes

引用

Journal of Central South University 2011年第3期18卷 711-717页

作者： LEE Mun-jae LEE Choon-man Department of mechanical design and manufacturing Engineering Changwon National University

A finite element model was established for analyzing the geometric errors in turning operations and a two-step analyzing process was proposed. In the first analyzing step, the cutting force and the cutting heat for the cutting conditions were obtained using the AdvantEdge. Also, the deformation of a workpiece was estimated in the second step using the ANSYS. The deformation was analyzed for a 150 mm-long workpiece at three different measuring points, such as 10, 70 and 130 mm from a reference point, and the amounts of the deformation were compared through experiments. /n the results of the comparison and analysis, the values obtained from these comparison and analysis represent similar tendencies. Also, it is verified that their geometric errors increase with the increase in temperature. In addition, regarding the factors that affect the deformation of a workpiecc, it can be seen that the geometric error in the lathe is about 15%, the error caused by the cutting force is about 10%, and the deformation caused by the heat is about 75%.

关键词： geometric error machining accuracy finite element analysis turning cutting force, cutting temperature

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：