检索结果-南通市图书馆

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 577-585页

作者： Fanjing Meng Wenbo Du Ning Ding Jian Sun Xian Du Ke Liu Shubo Li College of materials Science and engineering Faculty of Materials and ManufacturingBeijing University of TechnologyBeijing 100124China

The hybrid of carbon nanotube(CNT)and reduced graphene oxide(RGO)reinforced ZK61 composite was fabricated by a hot extrusion *** with the raw ZK61 alloy and single-reinforced composites,the hybrid-reinforced by RGO+CNT complex exhibited significant enhancements both in mechanical and thermal *** adjusting the proportion of RGO and CNT in ZK61 alloy,the obtained optimum ZK61/(0.06 wt%RGO+0.54 wt%CNT)composite exhibited increase of 25.4%in yield strength,26.5%in ultimate tensile strength,104%in failure strain and 30.4%in thermal conductivity,respectively,in comparison with ZK61 *** superior properties of the nano-hybrid composite are attributed to the synergetic effects of RGO and CNT,leading to a uniform dispersion and integrated structure as well as the enhanced interfacial bonding with *** strengthening ability of RGO and CNT was calculated to quantify their individual contribution to the improvement in mechanical and thermal properties of the ZK61 matrix *** RGO+CNT hybrids provide a promising way to develop Mg matrix composites with impressive performances.

关键词： Mg matrix composite Carbon nanotube Reduced graphene oxide Mechanical performance Thermal conductivity

Preface to the Special Issue:Additive manufacturing—Expanding Production Horizon

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 1-2页

作者： Lai-Chang Zhang centre for Advanced materials and manufacturing School of EngineeringEdith Cowan University270 Joondalup DriveJoondalupPerthWA6027Australia

Additive manufacturing(AM),commonly known as 3D printing,has become a transformative technology that has a profound impact on various industrial *** encompasses a set of techniques for building objects layer by layer from digital *** conventional subtractive manufacturing methods that involve removing material from large blocks,AM adds material incrementally,providing unprecedented design flexibility and efficiency.

关键词： removing printing Expanding

Stabilizing semi-transparent perovskite solar cells with a polymer composite hole transport layer

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第3期17卷 1500-1507页

作者： Yongbin Jin Huiping Feng Zheng Fang Liu Yang Kaikai Liu Bingru Deng Jingfu Chen Xueling Chen Yawen Zhong Jinxin Yang Chengbo Tian Liqiang Xie Zhanhua Wei Xiamen Key Laboratory of Optoelectronic materials and Advanced manufacturing Institute of Luminescent Materials and Information DisplaysCollege of Materials Science and EngineeringHuaqiao UniversityXiamen 361021China

Semi-transparent perovskite solar cells(ST-PSCs)have broad applications in building integrated ***,the stability of ST-PSCs needs to be improved,especially in n-i-p ST-PSCs since the doped 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene(Spiro-OMeTAD)is unstable at elevated temperatures and high *** this work,aπ-conjugated polymer poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophene-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione)](PBDB-T)is selected to form a polymer composite hole transport layer(HTL)with *** sulfur atom of the thiophene unit and the carbonyl group of the polymer interact with the undercoordinated Pb2+at the perovskite surface,which stabilizes the perovskite/HTL interface and passivates the interfacial *** incorporation of the polymer also increases the glass transition temperature and the moisture resistance of *** a result,we obtain ST-PSCs with a champion efficiency of 13.71%and an average visible light transmittance of 36.04%.Therefore,a high light utilization efficiency of 4.94%can be ***,the encapsulated device can maintain 84%of the initial efficiency after 751 h under continuous one-sun illumination(at 30%relative humidity)at the open circuit and the unencapsulated device can maintain 80%of the initial efficiency after maximum power tracking for more than 1250 h under continuous one-sun illumination.

关键词： semi-transparent solar cells π-conjugated polymer composite hole transport layer building integrated photovoltaics

Chlorofullerene C_(60)Cl_(6) Enables Efficient and Stable Tin-Based Perovskite Solar Cells

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental materials 2024年第1期7卷 176-183页

作者： Jingfu Chen Chengbo Tian Chao Sun Panpan Yang Wenjing Feng Lingfang Zheng Liu Yang Enlong Hou Jiefeng Luo Liqiang Xie Zhanhua Wei Xiamen Key Laboratory of Optoelectronic materials and Advanced manufacturing Institute of Luminescent Materials and Information DisplaysCollege of Materials Science and EngineeringHuaqiao UniversityXiamen 361021China

Tin-based perovskite solar cells(TPSCs)have received great attention due to their eco-friendly properties and high theoretical ***,the fast crystallization feature of tin-based perovskites leads to poor film quality and limits the corresponding device ***,a chlorofullerene,C_(60)Cl_(6),with six chlorine attached to the C_(60)cage,is applied to modulate the crystallization process and passivate grain boundary defects of the perovskite *** chemical interactions between C_(60)Cl_(6)and perovskite components retard the transforming process of precursors to perovskite crystals and obtain a high-quality tin-based perovskite *** is also revealed that the C_(60)Cl_(6)located at the surfaces and grain boundaries can not only passivate the defects but also offer a role in suturing grain boundaries to suppress the detrimental effects of water and oxygen on perovskite films,especially the oxidation of Sn^(2+)to Sn^(4+).As a result,the C_(60)Cl_(6)-based device yields a remarkably improved device efficiency from 10.03%to 13.30%with enhanced *** work provides a new strategy to regulate the film quality and stability of TPSCs using functional fullerene materials.

关键词： crystallization regulation defect passivation fullerene derivative perovskites solar cell tin-based perovskite

Interconnected microstructure and flexural behavior of Ti_(2)C-Ti composites with superior Young’s modulus

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第9期31卷 2088-2101页

作者： Fengbo Sun Rui Zhang Fanchao Meng Shuai Wang Lujun Huang Lin Geng School of materials Science and engineering Harbin Institute of TechnologyHarbin 150001China Waikato centre for Advanced materials and manufacturing School of EngineeringUniversity of WaikatoHamilton 3240New Zealand State Key Laboratory of Precision Welding&Joining of materials and Structures Harbin Institute of TechnologyHarbin 150001China

To enhance the Young’s modulus(E)and strength of titanium alloys,we designed titanium matrix composites with intercon-nected microstructure based on the Hashin-Shtrikman *** to the results,the in-situ reaction yielded an interconnected microstructure composed of Ti_(2)C particles when the Ti_(2)C content reached 50vol%.With widths of 10 and 230 nm,the intraparticle Ti lamellae in the prepared composite exhibited a bimodal size distribution due to precipitation and the unreacted Ti phase within the grown Ti_(2)C *** composites with interconnected microstructure attained superior properties,including E of 174.3 GPa and ultimate flexural strength of 1014 *** with that of pure Ti,the E of the composite was increased by 55% due to the high Ti_(2)C content and interconnected *** outstanding strength resulted from the strong interfacial bonding,load-bearing capacity of interconnected Ti_(2)C particles,and bimodal intraparticle Ti lamellae,which minimized the average crack driving *** flexural tests revealed preferential crack initiation along the{001}cleavage plane and grain boundary of Ti_(2)C in the region with the highest tensile *** addition,the propagation can be efficiently inhibited by interparticle Ti grains,which prevented the brittle fracture of the composites.

关键词： titanium matrix composites titanium carbide interface Young’s modulus flexural behavior

Microstructure and property of laser additive manufactured alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si after aged at different temperatures

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2275-2281页

作者： Guo-Chao Li Xu Cheng Hua-Ming Wang National engineering Laboratory of Additive manufacturing for Large Metallic Components and engineering Research Center of Ministry of Education on Laser Direct manufacturing for Large Metallic Components School of Materials Science and EngineeringBeihang UniversityBeijing 100191China

The solid solution and aging treatment for conventional manufacturing processes might not be suitable for laser additive manufactured titanium alloys due to the different lamellar *** this study,the influence of aging temperatures(600,700 and 800°C)on microstructure and mechanical properties of titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si was *** results indicate that after solid solution treatment at 970°C followed by water quenching,the alloy mainly consists of coarsening lamellar a phase in martensite α' *** at 600°C will not change the size of primary lamellar α phase but lead to huge amount of secondary a phases(α_(s))generating with very fine *** increasing the aging temperature,the number of α_(s) decreases but with coarsened *** aged at 800°C,the width of the asphase reaches 350 nm,almost 7 times wider than that aged at 600°*** changing size of α_(s) obviously influences the property of the *** fine α_(s) leads to high strength and microhardness but low plasticity,and specimen aged at 700°C with suitable assize has the best comprehensive properties.

关键词： α+βtitanium alloy Laser additive manufacturing Solid solution and aging treatment Microstructure Room temperature tensile property

Unveiling the Contribution of Lactic Acid to the Passivation Behavior of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion in Hank’s Solution

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 102-118页

作者： Yu-Hang Chu Liang-Yu Chen Bo-Yuan Qin Wenbin Gao Fanmin Shang Hong-Yu Yang Lina Zhang Peng Qin Lai-Chang Zhang School of materials Science and engineering Jiangsu University of Science and TechnologyZhenjiang212100China Foshan(Southern China)Institute for New materials Foshan528200China Key Laboratory of Automobile materials Ministry of Education and Department of Materials Science and EngineeringJilin UniversityChangchun130025China centre for Advanced materials and manufacturing School of EngineeringEdith Cowan University270 Joondalup DriveJoondalupPerthWA6027Australia

In actual physiological environments,bacteria can activate the immune system and release lactic ***,the detailed contribution of lactic acid to the passivation behavior of titanium(Ti)alloys is still *** current work investigated the in vitro passivation behavior of Ti-6Al-4V(TC4)alloys fabricated by laser powder bed fusion in Hank's solution with and without adding lactic *** methods,inductively coupled plasma atomic emission spectrometer,and X-ray photoelectron spectroscopy were jointly *** lactic acid decreases the corrosion resistance of samples by degrading the formed passive *** film formed in the(lactic acid)-containing solution exhibits a higher level of oxygen vacancies and a lower thickness,attributed to the suppressed formation of Ti^(4+)transformed from Ti^(3+)and Ti^(2+).Moreover,the presence of lactic acid would increase the open circuit potential,relieve the ions release,and hinder the deposition of calcium phosphates within 24 h immersion.

关键词： Titanium alloy Corrosion behavior Passive film Lactic acid Laser powder bed fusion

Fatigue Crack Initiation and Propagation Dominated by Crystallographic Factors in TiB/near α-Ti Composite

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 763-776页

作者： Fanchao Meng Rui Zhang Shuai Wang Fengbo Sun Run Chen Lujun Huang Lin Geng School of materials Science and engineering Harbin Institute of TechnologyHarbin 150001China Waikato centre for Advanced materials and manufacturing School of EngineeringUniversity of WaikatoHamilton 3240New Zealand State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China

Discontinuously reinforced titanium matrix composites(DRTMCs)with a network structure have been extensively researched due to their superior combination of strength and ***,their fatigue performance has remained *** order to elucidate the fatigue behavior of DRTMCs,a tension-tension fatigue test was performed on a TiB/nearα-Ti composite with network *** results showed that the variability of fatigue lifetime increased as the stress level *** analysis indicated that fatigue crack initiation was associated with facet formation,while the subsequent propagation was hindered by the network structure comprising TiB whiskers and *** characterization further revealed that facets formed due to a combination of shear and normal *** reduction in fatigue lifetime was attributed to an increase in the effective slip length,which was influenced by the orientation of grains near the crack-initiation sites toward basal slip in the life-limiting *** in situ observation suggested that the crack initiation was facilitated by both basal and prismatic slip ofα-Ti as well as fracture of *** propagation was found to be associated with basal and prismatic slip systems with high Schmid factors,regardless of whether the crack was intergranular or intragranular.

关键词： Titanium matrix composite TiBw Fatigue lifetime variability Crack initiation Crack propagation

Hot deformation behavior and microstructure evolution of GH3536-TiB_(2) composites fabricated by powder metallurgy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第7期67卷 2107-2124页

作者： ZHOU ShiPeng WANG Shuai HUANG LuJun ZHANG Rui CHEN Xin MENG FanChao CHEN Run SUN FengBo WANG CunYu GENG Lin School of materials Science and engineering Harbin Institute of TechnologyHarbin 150001China Waikato centre for Advanced materials and manufacturing School of EngineeringUniversity of WaikatoHamilton 3240New Zealand State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China

The hot deformation behavior and microstructure evolution of GH3536-TiB2composites fabricated by powder metallurgy(PM)were examined in the temperature range of 950–1150℃ and strain rate range of 0.001–1 s^(-1). The hot compression stress-strain curves and the constitutive equation were obtained. In addition, the hot processing map was drawn, which indicated that the appropriate hot working window was 950–1050℃/0.001–0.1 s^(-1)and 1050–1100℃/0.001–0.01 s^(-1). The microstructure analysis showed that the splitting and spheroidization of M3B2led to a decrease in size and volume fraction at 950–1100℃. At 1150℃,the eutectic microstructure of M_(3)B_(2)+ γ was formed due to the dissolution of M_(3)B_(2), which caused macroscopic cracking of the deformed sample. Additionally, the deformation temperature and the strain rate had little effect on the size and volume fraction of M_(3)B_(2). Besides, discontinuous dynamic recrystallization(DDRX) and continuous dynamic recrystallization(CDRX) were found in the deformed microstructure, while the former was dominant. Within the test range of this work, the dynamic recrystallization(DRX) fraction of the deformed composites was high due to the bulging nucleation of numerous interfaces. The DRX grain size increased with increasing deformation temperature or decreasing strain rate. Texture analysis showed that the deformation texture of //compression direction RD existed in the matrix when the deformation temperature was below 1100℃, and the texture type became //RD at 1100℃. Additionally, it was also found that the //RD texture was formed in M3B2under the strain rates of 0.1 and 0.01 s^(-1).

关键词： GH3536 alloy matrix composites powder metallurgy hot deformation behavior microstructure evolution

Theoretical insights into efficient oxygen evolution reaction using non-noble metal single-atom catalysts on W2CO2 MXene

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 5082-5094页

作者： Jing-Yu Zhou Zhi-Cheng Han Shu Zhao Tao Yang Da-Zhou Yan Hai-Jun Yu Institute of Advanced Battery materials and Devices College of Materials Science and EngineeringBeijing University of Technology Key Laboratory of Advanced Functional materials Ministry of EducationBeijing University of Technology China ENFI engineering Corporation National engineering Research Center of Silicon-Based materials manufacturing Technology

The pursuit of highly active oxygen evolution reaction （OER） catalysts,especially those free of noble metals,is a focal point in fuel cell *** extensive density functional theory calculations,this study designed and evaluated the activity and stability of singleatom catalysts （SACs） composed of 3d,4d and 5d transition metals supported on tungsten-based MXene for OER *** highlighted the exceptional OER performance of Ni@W2CO2,Rh@W2CO2and Pt@W2CO2,displaying remarkably low overpotentials The catalytic activity of TM@W2CO2SACs exhibited a robust correlation with surface properties,particularly the d-band center index and surface work *** Ni@W2CO2,Rh@W2CO2and Pt@W2CO2emerged as promising candidates for OER and oxygen reduction reaction （ORR） bifunctional catalysis,while Pt@W2CO2and Rh@ W2CO2showed high potential for OER and hydrogen evolution reaction （HER） bifunctional catalysis The effectiveness of tungsten-based MXene as a substrate for non-noble-metal SACs marks a breakthrough in OER catalyst design,driving advancements towards sustainable energy solutions and addressing critical challenges in energy conversion and storage.

关键词： Density functional theory MXene Non-noble metal Oxygen evolution reaction Single-atom catalysts