检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2024年第10期31卷 2233-2243页

作者： Guonan Ma Shize Zhu Dong Wang Peng Xue BolüXiao Zongyi Ma Shi-changxu Innovation Center for advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China centre of Excellence for advanced Materials Dongguan 523808China

A high-zinc composite,12vol%SiC/Al-13.3 Zn-3.27 Mg-1.07Cu(wt%),with an ultra-high-strength of 781 MPa was success-fully fabricated through a powder metallurgy method,followed by an extrusion *** effects of solid-solution and aging heat treat-ments on the microstructure and mechanical properties of the composite were extensively *** with a single-stage sol-id-solution treatment,a two-stage solid-solution treatment(470℃/1 h+480℃/1 h)exhibited a more effective solid-solution strengthen-ing owing to the higher degree of solid-solution and a more uniform *** to the aging hardness curves of the com-posite,the optimized aging parameter(100℃/22 h)was *** the aging temperature and time resulted in finer and more uniform nanoscale precipitates but only yielded a marginal increase in tensile *** fractography analysis revealed that intergranu-lar cracking and interface debonding were the main fracture mechanisms in the ultra-high-strength SiC/Al-Zn-Mg-Cu *** regions,such as the SiC/Al interface containing numerous compounds and the precipitate-free zones at the high-angle grain boundaries,were identified as significant factors limiting the strength enhancement of the *** compounds,including MgO,MgZn2,and Cu5Zn8,reduced the interfacial bonding strength,leading to interfacial debonding.

关键词： metal matrix composites heat treatment interfacial reaction mechanical properties fracture mechanism

High performance in Zintl thermoelectrics via reduction in crystal field splitting energy

在线全文

学校读者我要写书评

暂无评论

Science China Materials 2024年第10期67卷 3424-3425页

作者： Anustoop Das Kanishka Biswas New Chemistry Unit School of Advanced Materials and International Centre for Materials Science Jawaharlal Nehru Centre for Advanced Scientific Research(JNCASR)

Sustainable thermoelectric materials open an avenue of emission-free as well as fast-responding recycling of energy in terms of heat to *** efficiency （η） of such conversion is primarily guided by the dimensionless thermoelectric figure of merit （zT）,which depends on parameters like Seebeck coefficient （S）,electrical conductivity （σ）,and thermal conductivity（κ） at a given temperature （T）,which are adversely interrelated to each other （zT=S2σT/κ）[1,2].

关键词：

同方期刊数据库

Ultrahard X-ray multifunctional application beamline at the SSRF

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第6期35卷 14-25页

作者： Ke Yang Zhao-Hui Dong Chun-Yin Zhou Zi-Long Zhao Dong-Xu Liang Sai-Chao Cao Ai-Guo Li Shanghai advanced research Institute Chinese Academy of SciencesShanghai 201210China

The ultrahard X-ray multifunctional application beamline(BL12SW)is a phase-II beamline project at the Shanghai Syn-chrotron Radiation *** primary X-ray techniques used at the beamline are high-energy X-ray diffraction and imaging using white and monochromatic *** main scientific objectives of ultrahard X-ray beamlines are focused on two research *** is the study of the structural properties of Earth’s interior and new materials under extreme high-temperature and high-pressure conditions,and the other is the characterization of materials and processes in near-real service *** beamline utilizes a superconducting wiggler as the light source,with two diamond windows and SiC discs to filter out low-energy light(primarily below 30 keV)and a Cu filter assembly to control the thermal load entering the subsequent optical *** beamline is equipped with dual *** first was a meridional bending Laue monochromator cooled by liquid nitrogen,achieving a full-energy coverage of 30-162 *** second was a sagittal bending Laue monochromator installed in an external building,providing a focused beam in the horizontal direction with an energy range of 60-120 *** were four experimental hutches:two large-volume press experimental hutches(LVP1 and LVP2)and two engineering material experimental hutches(ENG1 and ENG2).Each hutch was equipped with various near-real service conditions to satisfy different *** example,LVP1 and LVP2 were equipped with a 200-ton DDIA press and a 2000-ton dual-mode(DDIA and Kawai)press,***1 and ENG2 provide in situ tensile,creep,and fatigue tests as well as high-temperature *** June 2023,the BL12SW has been in trial *** is expected to officially open to users by early 2024.

关键词： Shanghai Synchrotron Radiation Facility Ultrahard X-ray High energy diffraction High energy imaging Engineering materials Earth science

The hard X-ray nanoprobe beamline at the SSRF

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第7期35卷 79-88页

作者： Yan He Hui Jiang Dong-Xu Liang Zhi-Sen Jiang Huai-Na Yu Hua Wang Cheng-Wen Mao Jia-Nan Xie Ai-Guo Li Shanghai advanced research Institute Chinese Academy of SciencesShanghai201210China

The hard X-ray nanoprobe beamline BL13U is a phase-Ⅱ beamline project at the Shanghai Synchrotron Radiation *** beamline aims to enable comprehensive experiments at high spatial resolutions ranging from 50 to 10 nm. The X-ray energy range of the beamline, 5–25 keV, can detect most elements in the periodic table. Two operating modes were designed to accommodate the experimental requirements of high-energy resolution or high photon flux, respectively. X-ray nanofluorescence, nanodiffraction, and coherent diffraction imaging are developed as the main experimental techniques for BL13U. This paper describes the beamline optics, end station configurations, experimental methods under development, and preliminary test results. This comprehensive overview aims to provide a clear understanding of the beamline capabilities and potential applications.

关键词： Shanghai synchrotron radiation facility Hard X-ray nanoprobe X-ray nanofocusing

The SLEGS beamline of SSRF

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第7期35卷 20-30页

作者： Long-Xiang Liu Hong-Wei Wang Gong-Tao Fan Hang-Hua Xu Yue Zhang Zi-Rui Hao Ai-Guo Li Shanghai advanced research Institute Chinese Academy of SciencesShanghai201210China

The Shanghai Laser Electron Gamma Source(SLEGS, located in BL03SSID) beamline at the Shanghai Synchrotron Radiation Facility(SSRF) is a Laser Compton Scattering(LCS) gamma source used for the investigation of nuclear structure, which is in extensive demand in fields such as nuclear astrophysics, nuclear cluster structure, polarization physics, and nuclear energy. The beamline is based on the inverse Compton scattering of 10640 nm photons on 3.5 GeV electrons and a gamma source with variable energy by changing the scattering angle from 20° to 160°. γ rays of 0.25-21.1 MeV can be extracted by the scheme consisting of the interaction chamber, coarse collimator, fine collimator, and attenuator. The maximum photon flux for 180° is approximately 10~7 photons/s at the target at 21.7 MeV, with a 3-mm-diameter beam. The beamline was equipped with four types of spectrometers for experiments in( γ,γ'),( γ,n),( γ,p), and( γ,α). At present, Nuclear Resonance Fluorescence(NRF) spectrometry, Flat-Efficiency neutron Detector(FED) spectrometry, neutron Time-Of-Flight(TOF) spectrometry, and Light-Charged Particle(LCP) spectrometry methods have been developed.

关键词： Shanghai Synchrotron Radiation Facility SLEGS Nuclear astrophysics Nuclear structure

Stable graphene oxide-based lyotropic liquid crystals for interfacial lubrication

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第5期12卷 954-967页

作者： Yumei GUO Hanglin LI Jiusheng LI Xiangqiong ZENG Laboratory for advanced Lubricating Materials Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai201210China University of Chinese Academy of sciences Beijing100049China

Lyotropic liquid crystals have lubricating properties due to their ordered assembly and fluidity,whose mesogens are often characterized by amphiphilic *** the attention that graphene oxide(GO)has been studied as a novel amphiphilic lyotropic mesogen this decade,and GO applied as a lubrication additive has been demonstrated in both oil and water-based systems,little research reveals the interfacial lubrication of GO liquid crystals *** work reports that GO aqueous dispersion can form lyotropic liquid crystals above a specific critical concentration of 5.00 mg/mL,providing a form of stable water-based lubricant,which can keep stable for several months and can reduce friction by 37.3%and wear by 25.24%.The liquid crystal phase was verified by polarizing microscope and synchrotron radiation small-angle X-ray scattering,and its rheological properties and viscoelasticity were studied by interfacial *** formation of lyotropic liquid crystals can enhance the stability of GO aqueous dispersions at high density,simultaneously ensuring friction decrease and anti-wear *** is attributed to the stable nematic network by the ordered GO *** ordered assembly structure bears vertical shear force,therefore,reducing the *** is also assumed that the wide lateral size of graphene oxide promotes the nematic phase thus smoothes the graphene oxide film composed spontaneously under the coincidence of lamellar liquid crystal and 2D layered *** this work,the interlayer lubrication of GO was optimized,and the problem of GO dispersion sedimentation was solved by *** range of interfacial lubrication of GO aqueous dispersion has been expanded and the synergistic effect is conducive to the environmentally friendly lubricants.

关键词： lyotropic liquid crystal graphene oxide aqueous lubrication tribological behavior

Development of a high-repetition-rate lumped-inductance kicker magnet prototype for the beam switchyard of SHINE

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第2期35卷 20-31页

作者： Yong-Fang Liu Rui-Ping Wang Jin Tong Bo Zhang Si Chen Qi-Bing Yuan Hai-Xiao Deng Ming Gu Bo Liu Shanghai advanced research Institute Chinese Academy of SciencesShanghai 201412People’s Republic of China

The Shanghai high-repetition-rate X-ray free-electron laser and extreme light facility(SHINE)operates at a maximum repetition rate of 1 *** magnets are key components that distribute electron bunches into three different undulator lines in a bunch-by-bunch *** kicker field width must be less than the time interval between bunches.A lumpedinductance kicker prototype was developed using a vacuum chamber with a single-turn *** full magnetic field strength was 0.005 *** paper presents the requirements,design considerations,design parameters,magnetic field calculations,and measurements of the kicker *** relevant experimental results are also *** pulse width of the magnetic field was approximately 600 ns,and the maximum operation repetition rate was 1 *** developed kicker satisfies the requirements for the SHINE ***,numerous recommendations for the future optimization of kicker magnets are provided.

关键词： X-ray free-electron laser Kicker magnet Beam switchyard High repetition rate Ni-Zn ferrites

Two-stage aging treatment to accelerate aging kinetics without impairing strength in B_4C/7A04Al composite

在线全文

学校读者我要写书评

暂无评论

Science China(Technological sciences) 2024年第8期67卷 2485-2492页

作者： CHEN YunTao MA GuoNan ZHU ShiZe WANG Dong XIAO BoLv MA ZongYi Shi-Changxu Innovation Center for advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China centre of Excellence for advanced Materials Dongguan 523808China

Aging treatments are the key process to obtain satisfactory strength for 7xxxAl alloys and their composites. However, traditional single-stage(SS) aging is time-consuming to reach a peak strength condition. In this study, an efficient 120℃ + 160℃ two-stage(TS) aging treatment was proposed on a B_4C/7A04Al composite fabricated via powder metallurgy(PM) technology, which could acquire similar peak-aging strength but only took about 15% of the time compared to traditional 120℃ SS aging. The evolution of precipitation during the TS aging was investigated, as well as those of the 7A04Al alloys for comparison. In the second stage aging process, the higher aging temperature accelerated the nucleation of η′ phases inside the grains and thus increased the density of precipitates. Moreover, the short aging time limited the coarsening of precipitates and the broadening of precipitatefree zones. The above factors were beneficial for quickly obtaining satisfactory precipitation strengthening effects. The B_4C/7A04Al composite exhibited slower aging kinetics than the 7A04Al alloy in the TS aging. Mg elements consumption by the chemical reaction between B impurities introduced by B_4C particles and the Al matrix was considered to potentially retard the aging kinetics of the B_4C/7A04Al composite. Nevertheless, the precipitation sequence was not affected.

关键词： aluminum matrix composites aging treatment powder metallurgy mechanical properties precipitation

Fast X-ray imaging beamline at SSRF

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第9期35卷 68-81页

作者： Ke Li Hong-Lan Xie Ya-Nan Fu Fei-Xiang Wang Guo-Hao Du Jian-Feng ji Biao Deng Ti-Qiao Xiao Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China

The fast X-ray imaging beamline(BL16U2)at Shanghai Synchrotron Radiation Facility(SSRF)is a new beamline that provides X-ray micro-imaging capabilities across a wide range of time scales,spanning from 100 ps toμs and *** beamline has been specifically designed to facilitate the investigation of a wide range of rapid phenomena,such as the deformation and failure of materials subjected to intense dynamic *** addition,it enables the study of high-pressure and high-speed fuel spray processes in automotive *** light source of this beamline is a cryogenic permanent magnet undulator(CPMU)that is cooled by liquid *** CPMU can generate X-ray photons within an energy range of 8.7-30 *** beamline offers two modes of operation:monochromatic beam mode with a liquid nitrogen-cooled double-crystal monochromator(DCM)and pink beam mode with the first crystal of the DCM out of the beam *** X-ray imaging methods were implemented in BL16U2:single-pulse ultrafast X-ray imaging,microsecond-resolved X-ray dynamic imaging,millisecond-resolved X-ray dynamic micro-CT,and high-resolution quantitative ***,BL16U2 is equipped with various in situ impact loading systems,such as a split Hopkinson bar system,light gas gun,and fuel spray *** the completion of the final commissioning in 2021 and subsequent trial operations in 2022,the beamline has been officially available to users from 2023.

关键词： Multiple time-scale X ray imaging Single-pulse X ray imaging Dynamic 2D imaging Dynamic micro-CT

Surface diffraction beamline at the SSRF

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第7期35卷 47-57页

作者： Yue-Liang Gu Xu Zheng Xing-Min Zhang Bin Zhao Guang-Zhi Yin Da-Ming Zhu Yuan-He Sun Xing-Yu Gao Xiao-Long Li Shanghai advanced research Institute Chinese Academy of Sciences239 Zhangheng RoadPudong DistrictShanghai201204China

BL02U2 of the Shanghai Synchrotron Radiation Facility is a surface diffraction beamline with a photon flux of 5.5×10^(12) photons/s at 10 keV and a beam size of 160µm×80µm at the sample *** is dedicated to studying surfaces(solid-vacuum,solid-gas)and interfaces(solid-solid,solid-liquid,and liquid-liquid)in nanoscience,condensed matter,and soft matter systems using various surface scattering techniques over an energy range of 4.8-28 keV with transmission and reflection ***,BL02U2 has a high energy resolution,high angular resolution,and low beam divergence,which can provide excellent properties for X-ray diffraction experiments,such as grazing incident X-ray diffraction,X-ray reflectivity,crystal truncation rods,and liquid X-ray *** of in situ environments can also be provided for the samples *** paper describes the setup of the new beamline and its applications in various fields.

关键词： Surface and interface Beamline Surface diffraction Microstructure