检索结果-南通市图书馆

Thermal stability improvement and microstructure optimization of high cobalt content Nd-Fe-B magnets via terbium grain boundary diffusion

引用

Journal of Rare Earths 2024年第8期42卷 1531-1538,I0004页

作者： Jiyuan Xu Ruiyang Meng Jing Liu Jiateng Zhang Rui Han Yikun Fang Shengzhi Dong Wei Li Division of Functional Materials research Central Iron and Steel Research InstituteBeijing100081China

The substitution of Fe by Co in the 2:14:1 phase is an effective method to increase the Curie temperature and enhance the thermal stability of the Nd-Fe-B ***,the accumulation of Co ele ment at the grain boundaries(GBs) changes the GBs from nonmagnetic to ferromagnetic and causes the thinlayer GBs to become rare,In this paper,the method of diffusing Tb element was chosen to improve the microstructure and temperature stability of high-Co *** original sintered Nd_(28.5)Dy_(3)-CO_(x)e_(bal)M_(0.6)B_(i)(x=0,6 wt%,12 wt%;M = Cu,Al,Zr) magnets with different Co contents were diffused with Tb by grain boundary diffusion(GBD).After GBD,high-Co magnets exhibit more continuously distributed thin-layer GBs,and their thermal stability is significantly *** high-Co magnets(x=6 wt%),the absolute value of the temperature coefficient of coercivity decreases from 0.603%/K to0.508%/K in the temperature range of 293-413 K,that of remanence decreases from 0.099%/K to 0.091%/K,and the coercivity increases from 18.44 to 25.04 *** electron microscopy(TEM)characterization reveals that there are both the 1:2 phase and the amorphous phase in the high-Co magnet before and after GBD,EDS elemental analysis shows that Tb element is more likely to preferentially replace the rare earth elements in the 2:14:1 main phase than in the 1:2 phase and the amorphous *** concentration of Tb at the edge of the main phase is much higher than that in the 1:2phase and amorphous phase,which is beneficial to the improvement of the *** preferential replacement of Tb elements at the edge of the 2:14:1 phase and thin-layer GBs with a more continuous distribution are synergistically responsible for improving the thermal stability of high-Co *** study indicates that GBD is an effective method to improve the microstructure and thermal stability of high-Co magnets.

关键词： Nd-Fe-B magnets Coercivity Grain boundary diffusion Thermal stability Micro structure Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pr-Tb synergistic strengthening on coercivity of Nd-Ce-Fe-B magnets grain boundary diffused with Pr-Tb-Al-Ga alloys

引用

Journal of Rare Earths 2024年第9期42卷 1704-1709,I0003页

作者： Ruifang Song Hang Zhao Haibo Feng institute of Functional Materials Central Iron&Steel Research InstituteBeijing100081China

Sintered Nd-Ce-Fe-B magnets were grain boundary diffused(GBDed) with Pr_(x)Tb_(80-x)Al_(10)Ga_(10)(at%)(x=0,20,40,60,80) *** effect of Pr/Tb content in diffusion source on magnetic properties,microstructure and elements distribution of GBDed magnets was *** Pr is used to substitute for 75% Tb in diffusion source,Tb consumption per unit coercivity improvement of GBDed magnet reduces by 77%,compared with the Tb_(80)Al_(10)Ga_(10) diffused *** element diffuses into magnets and then forms Tb-rich shell with high magneto-crystalline anisotropy field surrounding main phase grains,resulting in substantial coercivity *** with low melting point diffuses deeply along liquid grain boundary phase during GBD *** can eliminate some sharp defects of main phase grains and make grain boundaries smooth,which provides diffusion channels for further diffusion of Tb ***,there are more diffusion channels for Tb and less Tb enriched at surface region,making Tb diffuse more deeply and improving Tb utilization *** method significantly improves the coercivity,and realizes the green,efficient and high-quality utilization of heavy rare earth(HRE)elements.

关键词： Grain boundary diffusion Rare earths Microstructure Synergistic strengthening

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synergistic effect and heterointerface engineering of cobalt/carbon nanotubes enhancing electromagnetic wave absorbing properties of silicon carbide fibers

引用

Nano research 2024年第9期17卷 8479-8486页

作者： Zixiang Zhao Zheyipei Ma Zizhao Ding Yanqiong Liu Mingwei Zhang Chao Jiang institute of Powder Metallurgy research Central South UniversityChangsha 410083China

To improve the synergistic effect between dielectric and magnetic loss is a practical and effective way in optimizing electromagnetic wave absorbing *** composites of metal particles and carbon ligands derived from metal organic frameworks have gained wide *** this study,Co particles and multiwalled carbon nanotubes(CNT)were successfully synthesized covering the surface of silicon carbide(SiC)fibers,and the morphology,interfaces and electromagnetic wave absorption performance were *** sample SiC@Co/CNT,the minimum reflection loss value can reach-70.22 dB at 11.21 GHz with the thickness of 2.12 *** effective absorbing bandwidth can reach up to 6.03 GHz with the thickness of 1.71 mm,which covers the entire Ku *** brings more interfaces between Co particles and CNTs as well as SiC fibers and Co/C *** interfacial polarization has been hugely enhanced,and the microwave absorbing properties have been *** article reports on the impedance matching of magnetic and non-magnetic components and the heterointerface engineering,which can be effective strategy and inspiration to illustrate the relationship between components,structures and functions of electromagnetic wave absorbing materials.

关键词： metal organic frameworks Co nanocrystals carbon nanotubes Schottky heterointerfaces synergistic effect

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Damping capacity of Fe_(83)Ga_(17) magnetostrictive alloy under magnetic field

引用

Rare Metals 2024年第1期43卷 402-409页

作者： Shao-Wen Yan Xing Mu Bing-Jie Liu Li-Hong Xu Shi-Hai Guo Yan Qi Hong-Ping Zhang Department of Functional Material research Central Iron and Steel Research InstituteBeijing 100081China

The damping performance of Fe_(83)Ga_(17) alloys has been investigated in the static magnetic field (H). The results demonstrate that the damping peak value can be adjusted between 0.020 and 0.085 under the magnetic f... 详细信息

关键词： alloy magnetic alloys

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds

引用

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 725-736页

作者： Hui Wang Yidi Li Ming Zhang Wei Gong Ruilin Lai Yunping Li State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China research institute of Light Alloy Central South UniversityChangsha 410083China

Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five *** this work,the microstructural evolution and mechanical performance of the Al-Mg-Si alloy plate repaired by the preheating-assisted AFSD process were *** evaluate the tool rotation speed and substrate preheating for repair quality,the AFSD technique was used to additively repair 5 mm depth blind holes on 6061 aluminum alloy *** results showed that preheat-assisted AFSD repair significantly improved joint bonding and joint strength compared to the control non-preheat substrate ***,increasing rotation speed was also beneficial to improve the metallurgical bonding of the interface and avoid volume *** preheating conditions,the UTS and elongation were positively correlated with rotation *** the process parameters of preheated substrate and tool rotation speed of 1000 r/min,defect-free specimens could be obtained accompanied by tensile fracture occurring in the substrate rather than the repaired *** UTS and elongation reached the maximum values of 164.2MPa and 13.4%,which are equivalent to 99.4%and 140%of the heated substrate,respectively.

关键词： additive friction stir deposition structural repair tool rotation speed Al alloy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Weatherability and heat resistance enhanced by interaction between AG25 and Mg/AI-LDH

引用

Rare Metals 2024年第6期43卷 2758-2768页

作者： Pei-Yao Yang Xiang-Cui Liu Yu-Chao Wang Huan-Ran Zheng Jin-Xian Wang Jia-Yi Zheng Meng-Jie Liu Dan-Ni Deng Yu Bai Ying-Bi Chen Tong Zhang Zhi-Ming Liu Yong-Peng Lei State Key Laboratory of Powder Metallurgy Powder Metallurgy Research InstituteCentral South UniversityChangsha 410083China research institute of Chemical Defense Beijing 102205China

Although inorganic pigments in common spectral tuning materials show good weatherability and heat resistance,the limited color choices,weak coloring power,poor dispersibility,and a possibility of toxicity limit their *** the basis of organic pigments which possess a wide range of colors,high coloring power,good transparency,and high safety,herein,the modified pigment and biomimetic coating with improved weatherability,especially ultraviolet(UV)resistance(from 2 to 6 days),was achieved by intercalating acid green 25(AG25)pigment into Mg/Al-layered double hydroxides(Mg/Al-LDH).Furthermore,the heat resistance of AG25 was also significantly ***,the spectral stability of pigments after heat treatment is superior with almost unchanged spectral profile and green reflection *** formation of strong N-H bonds and the S-M(Mg,Al)bonds between Mg/Al-LDH laminates and AG25 molecules contributes to the *** work shows potential for biomimetic leaf materials in respect of reflective spectra stability.

关键词： Layered double hydroxide Biomimetic Acid green 25 Interaction Weatherability Heat resistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Revealing effect of Al content on oxidation of novel Co-Cr-Nb-W carbide-strengthened superalloy

引用

Rare Metals 2024年第9期43卷 4521-4534页

作者： Chen Ling Shang-Ping Li Jie Hou He-Li Luo central Iron & Steel research institute Beijing GAONA Materials&Technology Co. Ltd.

The high-temperature oxidation behavior of novel Co-Cr-Nb-W carbide-strengthened wear-resistance alloys with different Al contents（1wt%, 2wt% and 3wt%）at 950, 1000 and 1050 °C was thoroughly investigated by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and field emission electron probe analyzer. The porous property of Nb C in-situ oxidation products（Nb2O5, Co Nb2O6and Co4Nb2O9） induces a multi-layered oxide scale with micropores and ***-Cr-Nb-W alloy with 1 wt% Al undergoes catastrophic oxidation and spalling above 1000 °C. The outward transportation of Cr and Co is effectively restrained by a continuous Al2O3scale formed around Nb C in-situ oxidation region when Al content reaches 3 wt%. The β-Co Al in Co-Cr-Nb-W alloy with 3 wt% Al has an oxidation priority over eutectic carbides and the alloy matrix which are both enriched with Cr, thereby preventing the formation of Cr-depletion area and improving the self-healing ability of the oxide film. A slight change in Al content has a remarkable influence on the cooperative effect of Al and Cr and multiplies the antioxidant capacity of Co-Cr-Nb-W alloy above 1000 °C.

关键词： High-temperature oxidation behavior Microstructure Oxidation kinetics Superalloy Wear-resistant alloy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Porous TiFe_(2) intermetallic compound fabricated via elemental powder reactive synthesis

引用

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 764-772页

作者： Qian Zhao Zhenli He Yuehui He Yue Qiu Zhonghe Wang Yao Jiang State Key Laboratory of Powder Metallurgy Powder Metallurgy Research InstituteCentral South UniversityChangsha 410083China

Porous intermetallics show potential in the field of filtration and separation as well as in the field of ***,porous Ti Fe2intermetallics were fabricated by the reactive synthesis of elemental *** phase transformation and pore formation of porous TiFe2intermetallics were investigated,and its corrosion behavior and hydrogen evolution reaction(HER)performance in alkali solution were *** TiFe2intermetallics with porosity in the range of 34.4%-56.4%were synthesized by the diffusion reaction of Ti and Fe elements,and the pore formation of porous TiFe2intermetallic compound is the result of a combination of the bridging effect and the Kirkendall *** porous TiFe2samples exhibit better corrosion resistance compared with porous 316L stainless steel,which is related to the formation of uniform nanosheets on the surface that hinder further corrosion,and porous TiFe2electrode shows the overpotential of 220.6 and 295.6 mV at 10 and 100 mA·cm-2,suggesting a good catalytic *** synthesized porous Fe-based intermetallic has a controllable pore structure as well as excellent corrosion resistance,showing its potential in the field of filtration and separation.

关键词： TiFe2 intermetallic compound porous materials reactive synthesis corrosion behavior hydrogen evolution reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimization of microstructure design for enhanced sensing performance in flexible piezoresistive sensors

引用

Journal of Advanced Ceramics 2024年第6期13卷 711-728页

作者： Xinghao Fan Hailong Hu Bin Liao Yaqi Zhang Fan Zhang School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083China research institute of Aerospace Technology Central South UniversityChangsha 410083China

Flexible piezoresistive strain sensors have received significant attention due to their diverse applications in monitoring human activities and health,as well as in robotics,prosthetics,and human–computer interaction *** the various flexible sensor types,those with microstructure designs are considered promising for strain sensing due to their simple structure,high sensitivity,extensive operational range,rapid response time,and robust *** review provides a concise overview of recent advancements in flexible piezoresistive sensors based on microstructure design for enhanced strain sensing performance,including the impact of microstructure on sensing mechanisms,classification of microstructure designs,fabrication methods,and practical ***,this review delves into the analysis of piezoresistive sensor sensing mechanisms and performance parameters,exploring the relationship between microstructure design and performance ***,an in-depth discussion is presented,focusing on the primary themes of microstructure design classification,process selection,performance characteristics,and specific *** review employs mathematical modeling and hierarchical analysis to emphasize the directionality of different microstructures on performance enhancement and to highlight the performance advantages and applicable features of various microstructure *** conclusion,this review examines the multifunctionality of flexible piezoresistive sensors based on microstructure design and addresses the challenges that still need to be overcome and improved,such as achieving a wide range of stretchability,high sensitivity,and robust *** review summarizes the research directions for enhancing sensing performance through microstructure design,aiming to assist in the advancement of flexible piezoresistive sensors.

关键词： microstructure design sensing performance flexible piezoresistive strain sensors microsensing mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-performance anisotropic SmCo-based magnet with novel microstructure

引用

Journal of Rare Earths 2024年第8期42卷 1539-1545,I0005页

作者： Yingchang Li Zicao Xing Nengjun Yu Zesong Ren Minxiang Pan Qiong Wu Hongliang Ge Minggang Zhu Wei Li College of Materials and Chemistry China jiliang UniversityHangzhou 310018China Division of Functional Materials research Central Iron and Steel Research InstituteBeijing 100081China

A novel micro structure of magnetically anisotropic Sm Co-based magnet with high-performance is *** magnet consists of SmCo_(7)-H(TbCu_(7)-hexagonal type),Sm_(2)Co_(17)-H(Th_(2)Ni_(17)-hexagonal type)and SmCo_(3)-R(SmCo_(3)-rhombohedral type)*** maximum magnetic energy product of the magnet is 231.69 kj/m^(3),and the intrinsic coercivity is 1005.47 kA/*** outstanding intrinsic coercivity temperature coefficient(β)of-0.125%/K between 298 and 773 K is obtained,which is very close to theβof commercial high-temperature Sm_(2)Co_(17)-based sintered *** initial magnetization curve indicates that the coercivity mechanism is controlled by a domain wall pinning *** SmCo_(3)-R lamellar phase may be a potential pinning center or self-pinning *** microstructure of the magnet is different from that of any previous SmCo-based *** findings provide a new idea for preparing high-performance SmCo-based permanent magnets.

关键词： Rare earths Permanent magnet Composite magnet Melt-spinning Microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：