检索结果-南通市图书馆

Experimental and numerical study of hypervelocity impact damage on composite overwrapped pressure vessels

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第1期31卷 58-72页

作者： Yong-Pan Duan Run-Qiang Chi Bao-Jun Pang Yuan Cai Hypervelocity Impact Research center Harbin Institute of TechnologyHarbin150080China College of science Heilongjiang University of Science and TechnologyHarbin 150022China

Ground-based tests are important for studying hypervelocity impact(HVI)damage to spacecraft pressure vessels in the orbital debris environment.We analyzed the damage to composite overwrapped pressure vessels(COPVs)in the HVI tests and classified the damage into non-catastrophic damage and catastrophic damage.We proposed a numerical simulation method to further study non-catastrophic damage and revealed the characteristics and mechanisms of non-catastrophic damage affected by impact conditions and internal pressures.The fragments of the catastrophically damaged COPVs were collected after the tests.The crack distribution and propagation process of the catastrophic ruptures of the COPVs were analyzed.Our findings contribute to understanding the damage characteristics and mechanisms of COPVs by HVIs.

关键词： Orbital debris Hypervelocity impact Composite overwrapped pressure vessels Damage mechanisms

Inhibition of Defect-Induced Ice Nucleation, Propagation, and Adhesion by Bioinspired Self-Healing Anti-Icing Coatings

在线全文

学校读者我要写书评

暂无评论

Research 2024年第1期2023卷 237-246页

作者： Shu Tian Ruiqi Li Xinmeng Liu Jiancheng Wang Junyu Yu Sijia Xu Yunqing Tian Jing Yang Lei Zhang Department of Biochemical Engineering Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering(MOE)School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300350China Binzhou Institute of technology Weiqiao-UCAS Science and Technology ParkBinzhou CityShandong Province 256606China

Anti-icing coatings on outdoor infrastructures inevitably suffer from mechanical injuries in numerous icing scenarios such as hailstorms,sandstorms,impacts of foreign objects,and icing–deicing cycles.Herein,the mechanisms of surface-defect-induced icing are clarified.At the defects,water molecules exhibit stronger adsorption and the heat transfer rate increases,accelerating the condensation of water vapor as well as ice nucleation and propagation.Moreover,the ice–defect interlocking structure increases the ice adhesion strength.Thus,a self-healing(at−20℃)antifreeze-protein(AFP)-inspired anti-icing coating is developed.The coating is based on a design that mimics the ice-binding and non-ice-binding sites in AFPs.It enables the coating to markedly inhibit ice nucleation(nucleation temperatureunder various extreme conditions.This work reveals the in-depth mechanism of defect-induced ice formation as well as adhesion,and proposes a self-healing anti-icing coating for outdoor infrastructures.

关键词： coating defect clarified

Global hybrid simulations of soft X-ray emissions in the Earth’s magnetosheath

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第1期8卷 47-58页

作者： Jin Guo TianRan Sun San Lu QuanMing Lu Yu Lin XueYi Wang Chi Wang RongSheng Wang Kai Huang School of Earth and Space sciences University of Science and Technology of ChinaHefei 230026China CAS center for Excellence in Comparative Planetology/CAS Key Lab of Geospace Environment University of Science and Technology of ChinaHefei 230026China Collaborative Innovation center of Astronautical science and technology Harbin 150001China National Space science center Chinese Academy of SciencesBeijing 100190China Physics Department Auburn UniversityAuburnALUSA

Earth’s magnetopause is a thin boundary separating the shocked solar wind plasma from the magnetospheric plasmas,and it is also the boundary of the solar wind energy transport to the magnetosphere.Soft X-ray imaging allows investigation of the large-scale magnetopause by providing a two-dimensional(2-D)global view from a satellite.By performing 3-D global hybrid-particle-in-cell(hybrid-PIC)simulations,we obtain soft X-ray images of Earth’s magnetopause under different solar wind conditions,such as different plasma densities and directions of the southward interplanetary magnetic field.In all cases,magnetic reconnection occurs at low latitude magnetopause.The soft X-ray images observed by a hypothetical satellite are shown,with all of the following identified:the boundary of the magnetopause,the cusps,and the magnetosheath.Local X-ray emissivity in the magnetosheath is characterized by large amplitude fluctuations(up to 160%);however,the maximum line-of-sight-integrated X-ray intensity matches the tangent directions of the magnetopause well,indicating that these fluctuations have limited impact on identifying the magnetopause boundary in the X-ray images.Moreover,the magnetopause boundary can be identified using multiple viewing geometries.We also find that solar wind conditions have little effect on the magnetopause identification.The Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)mission will provide X-ray images of the magnetopause for the first time,and our global hybrid-PIC simulation results can help better understand the 2-D X-ray images of the magnetopause from a 3-D perspective,with particle kinetic effects considered.

关键词： magnetopause X-ray emissivity X-ray imaging SMILE global hybrid-PIC simulation

Experimental and numerical analyses of the effect of fibre content on the close-in blast performance of a UHPFRC beam

在线全文

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第1期31卷 242-261页

作者： Junbo Yan Qiyue Zhang Yan Liu Yingliang Xu Zhenqing Shi Fan Bai Fenglei Huang State Key Laboratory of Explosion science and technology Beijing Institute of TechnologyBeijing 100081China Beijing Institute of technology Chongqing Innovation center Chongqing 401120China

Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge gap through experimental and mesoscale numerical methods.Experiments were conducted on ten UHPFRC beams built with varying steel fiber volumetric fractions subjected to close-in explosive conditions.Additionally,this study considered other parameters,such as the longitudinal reinforcement type and ratio.In the case of UHPFRC beams featuring normal-strength longitudinal reinforcement of diametersΦ12,Φ16,andΦ20,a reduction in maximum displacement by magnitudes of19.6%,19.5%,and 17.4%was observed,respectively,as the volumetric fractions of fiber increased from1.0%to 2.5%.In addition,increasing the longitudinal reinforcement ratio and using high-strength steel longitudinal reinforcement both significantly reduced the deformation characteristics and increase the blasting resistances of UHPFRC beams.However,the effects on the local crushing and spalling damage were not significant.A mesoscale finite element model,which considers the impacts of fiber parameters on UHPFRC beam behaviors,was also established and well correlated with the test findings.Nevertheless,parametric analyses were further conducted to examine the impacts of the steel fiber content and length and the hybrid effects of various types of microfibers and steel fibers on the blasting performance of UHPFRC beams.

关键词： Blast performance Close-in blast Fiber content Mesoscale approach UHPFRC beams

Grain boundary engineering for enhancing intergranular damage resistance of ferritic/martensitic steel P92

在线全文

学校读者我要写书评

暂无评论

Nuclear science and Techniques 2024年第5期35卷 186-199页

作者： Lei Peng Shang-Ming Chen Jing-Yi Shi Yong-Jie Sun Yi-Fei Liu Yin-Zhong Shen Hong-Ya He Hui-Juan Wang Jie Tian State Key Laboratory of Particle Detection and Electronics University of Science and Technology of ChinaHefei 230026China School of Nuclear science and technology University of Science and Technology of ChinaHefei 230027China School of Materials Engineering Shanghai University of Engineering Science333 Long Teng RoadShanghai 201620China Experimental center of Engineering and Material science University of Science and Technology of ChinaHefei 230026China

Ferritic/martensitic(F/M)steel is widely used as a structural material in thermal and nuclear power plants.However,it is susceptible to intergranular damage,which is a critical issue,under service conditions.In this study,to improve the resistance to intergranular damage of F/M steel,a thermomechanical process(TMP)was employed to achieve a grain boundary engineering(GBE)microstructure in F/M steel P92.The TMP,including cold-rolling thickness reduction of 6%,9%,and 12%,followed by austenitization at 1323 K for 40 min and tempering at 1053 K for 45 min,was applied to the as-received(AR)P92 steel.The prior austenite grain(PAG)size,prior austenite grain boundary character distribution(GBCD),and connectivity of prior austenite grain boundaries(PAGBs)were investigated.Compared to the AR specimen,the PAG size did not change significantly.The fraction of coincident site lattice boundaries(CSLBs,3≤Σ≤29)and Σ3^(n) boundaries along PAGBs decreased with increasing reduction ratio because the recrystallization fraction increased with increasing reduction ratio.The PAGB connectivity of the 6%deformed specimen slightly deteriorated compared with that of the AR specimen.Moreover,potentiodynamic polarization studies revealed that the intergranular damage resistance of the studied steel could be improved by increasing the fraction of CSLBs along the PAGBs,indicating that the TMP,which involves low deformation,could enhance the intergranular damage resistance.

关键词： Grain boundary engineering Ferritic/martensitic steel Prior austenite grain boundary character distribution Grain boundary connectivity Intergranular damage resistance

Dynamical pattern recognition for univariate time series and its application to an axial compressor

在线全文

学校读者我要写书评

暂无评论

Control Theory and technology 2024年第1期22卷 39-55页

作者： Jingtao Hu Weiming Wu Zejian Zhu Cong Wang center for Intelligent Medical Engineering School of Control Science and TechnologyShandong UniversityJinan250061ShandongChina School of Automation science and Engineering South China University of TechnologyGuangzhou510641GuangdongChina

In this paper, a learning and recognition approach is proposed for univariate time series composed of output measurements of general nonlinear dynamical systems. Firstly, a class of dynamical systems in the canonical form is derived to describe the univariate time series by introducing coordinate transformation. An observer-based deterministic learning technique is then adopted to achieve dynamical modeling of the associated transformed systems of the training univariate time series, and the modeling results in the form of radial basis function network (RBFN) models are stored in a pattern library. Subsequently, multiple observer-based dynamical estimators containing the RBFN models in the pattern library are constructed for a test univariate time series, and a recognition decision scheme is proposed by the derived recognition indicator. On this basis, more concise recognition conditions are provided, which is beneficial for verifying the recognition results. Finally, simulation studies on the Rossler system and aero-engine stall warning verify the effectiveness of the proposed approach.

关键词： Dynamical pattern recognition Deterministic learning Stall warning Radial basis function network Sampled-data observer

Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第3期31卷 688-699页

作者： Wen-quan Sun Sheng-yi Yong Tie-heng Yuan Ting-song Yang An-rui He Chao Liu Rui-chun Guo National Engineering Research center for Advanced Rolling and Intelligent Manufacturing University of Science and Technology BeijingBeijing 100083China

The slow phase transformation of microalloyed dual phase steel makes the nonuniform stress and temperature fields during the post rolling cooling process have a significant impact on the phase transformation process.Given the relatively slow phase transformation of DP780 steel within the microalloyed dual phase steel series,the influence of stress on the phase transformation behavior of DP780 steel was investigated.To quantify the nonuniform thermal and stress conditions in the steel coil,a thermo-mechanical coupled finite element model of the hot-rolled strip cooling process was established.Based on the simulation data,DP780 steel was chosen as the research material,and Gleeble 3500 thermal simulation equipment was used for experimental validation.The thermal expansion curves were analyzed through regression to establish the dynamic model of DP780 steel phase transformation under stress.Subsequently,metallographic analysis was conducted to determine phase transformation type and grain size of DP780 steel.The results confirmed that the stress promotes the occurrence of semi-diffusion-type bainite transformation.Furthermore,an appropriate level of stress facilitates the growth of bainitic grains,while the increased stress inhibits the growth of ferritic grains.

关键词： Microalloyed dual phase steel Stress Bainitic transformation Grain Finite element method

Control of GaN inverted pyramids growth on c-plane patterned sapphire substrates

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Semiconductors 2024年第6期45卷 92-96页

作者： Luming Yu Xun Wang Zhibiao Hao Yi Luo Changzheng Sun Bing Xiong Yanjun Han Jian Wang Hongtao Li Lin Gan Lai Wang Beijing National Research center for Information science and technology Department of Electronic EngineeringTsinghua UniversityBei-jing 100084China center for Flexible Electronics technology Tsinghua UniversityBeijing 100084China

Growth of gallium nitride(GaN)inverted pyramids on c-plane sapphire substrates is benefit for fabricating novel devices as it forms the semipolar facets.In this work,GaN inverted pyramids are directly grown on c-plane patterned sapphire substrates(PSS)by metal organic vapor phase epitaxy(MOVPE).The influences of growth conditions on the surface morphol-ogy are experimentally studied and explained by Wulff constructions.The competition of growth rate among{0001},{1011},and{1122}facets results in the various surface morphologies of GaN.A higher growth temperature of 985 ℃ and a lowerⅤ/Ⅲratio of 25 can expand the area of{}facets in GaN inverted pyramids.On the other hand,GaN inverted pyramids with almost pure{}facets are obtained by using a lower growth temperature of 930℃,a higherⅤ/Ⅲratio of 100,and PSS with pattern arrangement perpendicular to the substrate primary flat.

关键词： inverted pyramids GaN MOVPE crystal growth competition model

Set-Membership Filtering Approach to Dynamic Event-Triggered Fault Estimation for a Class of Nonlinear Time-Varying Complex Networks

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第3期11卷 638-648页

作者： Xiaoting Du Lei Zou Maiying Zhong the College of Electrical Engineering and Automation Shandong University of Science and TechnologyQingdao 266590China IEEE the College of Information science and technology Donghua UniversityShanghai 201620 the Engineering Research center of Digitalized Textile and Fashion technology Ministry of EducationShanghai 201620China

The present study addresses the problem of fault estimation for a specific class of nonlinear time-varying complex networks,utilizing an unknown-input-observer approach within the framework of dynamic event-triggered mechanism(DETM).In order to optimize communication resource utilization,the DETM is employed to determine whether the current measurement data should be transmitted to the estimator or not.To guarantee a satisfactory estimation performance for the fault signal,an unknown-input-observer-based estimator is constructed to decouple the estimation error dynamics from the influence of fault signals.The aim of this paper is to find the suitable estimator parameters under the effects of DETM such that both the state estimates and fault estimates are confined within two sets of closed ellipsoid domains.The techniques of recursive matrix inequality are applied to derive sufficient conditions for the existence of the desired estimator,ensuring that the specified performance requirements are met under certain conditions.Then,the estimator gains are derived by minimizing the ellipsoid domain in the sense of trace and a recursive estimator parameter design algorithm is then provided.Finally,a numerical example is conducted to demonstrate the effectiveness of the designed estimator.

关键词： Dynamic event-triggered mechanism(DETM) fault estimation nonlinear time-varying complex networks set-member-ship filtering unknown input observer