检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and materials 2024年第10期31卷 2233-2243页

作者： Guonan Ma Shize Zhu Dong Wang Peng Xue BolüXiao Zongyi Ma Shi-changxu Innovation center for advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Centre of excellence for advanced materials Dongguan 523808China

A high-zinc composite,12vol%SiC/Al-13.3 Zn-3.27 Mg-1.07Cu(wt%),with an ultra-high-strength of 781 MPa was success-fully fabricated through a powder metallurgy method,followed by an extrusion *** effects of solid-solution and aging heat treat-ments on the microstructure and mechanical properties of the composite were extensively *** with a single-stage sol-id-solution treatment,a two-stage solid-solution treatment(470℃/1 h+480℃/1 h)exhibited a more effective solid-solution strengthen-ing owing to the higher degree of solid-solution and a more uniform *** to the aging hardness curves of the com-posite,the optimized aging parameter(100℃/22 h)was *** the aging temperature and time resulted in finer and more uniform nanoscale precipitates but only yielded a marginal increase in tensile *** fractography analysis revealed that intergranu-lar cracking and interface debonding were the main fracture mechanisms in the ultra-high-strength SiC/Al-Zn-Mg-Cu *** regions,such as the SiC/Al interface containing numerous compounds and the precipitate-free zones at the high-angle grain boundaries,were identified as significant factors limiting the strength enhancement of the *** compounds,including MgO,MgZn2,and Cu5Zn8,reduced the interfacial bonding strength,leading to interfacial debonding.

关键词： metal matrix composites heat treatment interfacial reaction mechanical properties fracture mechanism

Design of low-alloying and high-performance solid solution-strengthened copper alloys with element substitution for sustainable development

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第5期31卷 826-832页

作者： Jiaqiang Li Hongtao Zhang Jingtai Sun Huadong Fu Jianxin Xie Beijing advanced Innovation center for materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Key Laboratory for advanced materials processing(MOE) University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic materials and processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China Liaoning Academy of materials Shenyang 110004China

Solid solution-strengthened copper alloys have the advantages of a simple composition and manufacturing process,high mechanical and electrical comprehensive performances,and low cost;thus,they are widely used in high-speed rail contact wires,electronic component connectors,and other *** the contradiction between low alloying and high performance is an important challenge in the development of solid solution-strengthened copper *** the typical solid solution-strengthened alloy Cu-4Zn-1Sn as the research object,we proposed using the element In to replace Zn and Sn to achieve low alloying in this *** new alloys,Cu-1.5Zn-1Sn-0.4In and Cu-1.5Zn-0.9Sn-0.6In,were designed and *** total weight percentage content of alloying elements decreased by 43%and 41%,respectively,while the product of ultimate tensile strength(UTS)and electrical conductivity(EC)of the annealed state increased by 14%and 15%.After cold rolling with a 90%reduction,the UTS of the two new alloys reached 576 and 627MPa,respectively,the EC was 44.9%IACS and 42.0%IACS,and the product of UTS and EC(UTS×EC)was 97%and 99%higher than that of the annealed state *** dislocations proliferated greatly in cold-rolled alloys,and the strengthening effects of dislocations reached 332 and 356 MPa,respectively,which is the main reason for the considerable improvement in mechanical properties.

关键词： element substitution copper alloy solid solution strengthening microstructure and performance

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第2期31卷 351-361页

作者： Yuheng Zhang Zixin Li Yunwei Gui Huadong Fu Jianxin Xie Beijing advanced Innovation center for materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Institute of materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110004China Key Laboratory for advanced materials processing(MOE) University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic materials and processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China

Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue ***,these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end *** previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of ***,the intricate interaction among elements considerably affects the oxidation resistance of *** this paper,Co-35Ni-10Al-2W-5Cr-2Mo-1Nb-xTi-(5−x)Ta alloys(x=1,2,3,4)with varying Ti and Ta contents were designed and compounded,and their oxidation resistance was investigated at the temperature range from 800 to 1000℃.After oxidation at three test conditions,namely,800℃for 200 h,900℃for 200 h,and 1000℃for 50 h,the main structure of the oxide layer of the alloy consisted of spinel,Cr_(2)O_(3),and Al_(2)O_(3)from outside to *** consisting of Ta,W,and Mo formed below the Cr_(2)O_(3)*** interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta ***,an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the *** study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide *** results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.

关键词： Co-Ni-based superalloys high-temperature oxidation Ti and Ta elements formation mechanism of holes

Atomistic understanding of capacity loss in LiNiO_(2)for high-nickel Li-ion batteries:First-principles study

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第5期33卷 625-629页

作者：彭率陈丽娟何长春杨小宝 School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510000China center of excellence for advanced materials Dongguan 523808China

Combining the first-principles calculations and structural enumeration with recognition,the delithiation process of LiNiO_(2)is investigated,where various supercell shapes are considered in order to obtain the formation energy of Li_(x)NiO_(2).Meanwhile,the voltage profile is simulated and the ordered phases of lithium vacancies corresponding to concentrations of 1/4,2/5,3/7,1/2,2/3,3/4,5/6,and 6/7 are *** understand the capacity decay in the experiment during the charge/discharge cycles,deoxygenation and Li/Ni antisite defects are calculated,revealing that the chains of oxygen vacancies will be energetically *** can be inferred that in the absence of oxygen atom in high delithiate state,the diffusion of Ni atoms is facilitated and the formation of Li/Ni antisite is induced.

关键词： Li-ion battery ground state formation energy oxygen vacancy Li/Ni antisite

Two-stage aging treatment to accelerate aging kinetics without impairing strength in B_4C/7A04Al composite

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第8期67卷 2485-2492页

作者： CHEN YunTao MA GuoNan ZHU ShiZe WANG Dong XIAO BoLv MA ZongYi Shi-Changxu Innovation center for advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Centre of excellence for advanced materials Dongguan 523808China

Aging treatments are the key process to obtain satisfactory strength for 7xxxAl alloys and their composites. However, traditional single-stage(SS) aging is time-consuming to reach a peak strength condition. In this study, an efficient 120℃ + 160℃ two-stage(TS) aging treatment was proposed on a B_4C/7A04Al composite fabricated via powder metallurgy(PM) technology, which could acquire similar peak-aging strength but only took about 15% of the time compared to traditional 120℃ SS aging. The evolution of precipitation during the TS aging was investigated, as well as those of the 7A04Al alloys for comparison. In the second stage aging process, the higher aging temperature accelerated the nucleation of η′ phases inside the grains and thus increased the density of precipitates. Moreover, the short aging time limited the coarsening of precipitates and the broadening of precipitatefree zones. The above factors were beneficial for quickly obtaining satisfactory precipitation strengthening effects. The B_4C/7A04Al composite exhibited slower aging kinetics than the 7A04Al alloy in the TS aging. Mg elements consumption by the chemical reaction between B impurities introduced by B_4C particles and the Al matrix was considered to potentially retard the aging kinetics of the B_4C/7A04Al composite. Nevertheless, the precipitation sequence was not affected.

关键词： aluminum matrix composites aging treatment powder metallurgy mechanical properties precipitation

Mussel-inspired Methacrylic Gelatin-dopamine/Ag Nanoparticles/Graphene Oxide Hydrogels with Improved Adhesive and Antibacterial Properties for Applications as Wound Dressings

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials Science) 2024年第2期39卷 512-521页

作者：宿正楠 HU Yanru MENG Lihui OUYANG Zhiyuan LI Wenchao ZHU Fang XIE Bin 吴庆知 State Key Laboratory of advanced Technology for materials Synthesis and processing Biomedical Material and Engineering Center of Hubei ProvinceWuhan University of TechnologyWuhan 430070China

A novel strategy was developed to prepare the methacrylic gelatin-dopamine(GelMA-DA)/Ag nanoparticles(NPs)/graphene oxide(GO) composite hydrogels with good biocompatibility,mechanical properties,and antibacterial ***-inspired DA was utilized to modify the GelMA molecules,which imparts good adhesive performance to the ***,interfacial enhancer,not only improves mechanical properties of the hydrogels,but also provides anchor sites for loading Ag NPs through numerous oxygencontaining functional groups on the *** experimental results show that the GelMA/Ag NPs/GO hydrogels have good biocompatibility,and exhibit a swelling rate of 202±16%,the lap shear strength of 147±17 kPa,and compressive modulus of 136±53 kPa,in the case of the Ag NPs/GO content of 2 mg/*** activity of the hydrogels against both gram-negative and gram-positive bacteria is dependent on the Ag NPs/GO content derived from the release of Ag^(+).Furthermore,the GelMA/Ag NPs/GO hydrogels possess good adhesive ability,which is resistant to highly twisted state when stuck on the surface of *** results demonstrate promising potential of the GelMA-DA/Ag NPs/GO hydrogels as wound dressings for biomedical applications in clinical and emergent treatment.

关键词： GelMA dopamine,graphene oxide adhesion antibacterial ability

Emerging probing perspective of two-dimensional materials physics:terahertz emission spectroscopy

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第7期13卷 1278-1298页

作者： Yifei Wu Yuqi Wang Di Bao Xiaonan Deng Simian Zhang Lin Yu-chun Shengxian Ke Jianing Liu Yingjie Liu Zeli Wang Pingren Ham Andrew Hanna Jiaming Pan Xinyue Hu Zhengcao Li Ji Zhou Chen Wang State Key Laboratory of New Ceramics and Fine processing Key Laboratory of Advanced Materials of Ministry of EducationSchool of Materials Science and EngineeringTsinghua University100084 BeijingChina Beijing advanced Innovation center for Integrated Circuits 100084 BeijingChina

Terahertz(THz)emission spectroscopy(TES)has emerged as a highly effective and versatile technique for investigating the photoelectric properties of diverse materials and nonlinear physical processes in the past few ***,research on two-dimensional(2D)materials has experienced substantial growth due to their atomically thin structures,exceptional mechanical and optoelectronic properties,and the potential for applications in flexible electronics,sensing,and ***,these materials offer advantages such as tunable bandgap,high carrier mobility,wideband optical absorption,and relatively short carrier *** applying TES to investigate the 2D materials,their interfaces and heterostructures,rich information about the interplay among photons,charges,phonons and spins can be unfolded,which provides fundamental understanding for future *** it is timely to review the nonlinear processes underlying THz emission in 2D materials including optical rectification,photon-drag,high-order harmonic generation and spin-to-charge conversion,showcasing the rich diversity of the TES employed to unravel the complex nature of these *** applications based on THz emissions,such as THz lasers,ultrafast imaging and biosensors,are also *** further,we analyzed the unique advantages of spintronic terahertz emitters and the future technological advancements in the development of new THz generation mechanisms leading to advanced THz sources characterized by wide bandwidth,high power and integration,suitable for industrial and commercial *** continuous advancement and integration of TES with the study of 2D materials and heterostructures promise to revolutionize research in different areas,including basic materials physics,novel optoelectronic devices,and chips for post-Moore’s era.

关键词： optoelectronic versatile exceptional

Ultraviolet Photodetector based on Sr_(2)Nb_(3)O_(10) Perovskite Nanosheets

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials Science) 2024年第2期39卷 282-287页

作者：张斌斌 JIA Mengmeng LIANG Qi WU Jinsong ZHAI Junyi 李宝文 School of materials Science and Engineering Wuhan University of TechnologyWuhan 430070China CAS center for excellence in Nanoscience Beijing Institute of Nanoenergy and NanosystemsChinese Academy of SciencesBeijin 100083China State Key Laboratory of advanced Technology for materials Synthesis and processing Wuhan University of TechnologyWuhan 430070China

Liquid-phase exfoliation was employed to synthesize Sr_(2)Nb_(3)O_(10) perovskite nanosheets with thicknesses down to 1.76 *** electron microscopy(TEM),atomic force microscope(AFM),X-ray photoelectron spectrometer(XPS),and other characterization techniques were used to evaluate the atomic structure and chemical composition of the exfoliated nanosheets.A UV photodetector based on individual Sr_(2)Nb_(3)O_(10) nanosheets was prepared to demonstrate the application of an ultraviolet(UV) *** UV photodetector exhibited outstanding photocurrent and responsivity with a responsivity of 3×10^(5) A·W^(-1) at 5 V bias under 280 nm illumination,a photocurrent of 60 nA,and an on/off ratio of 3×10^(2).

关键词： perovskite nanosheets liquid-phase exfoliation ultraviolet photodetector

EBSD analysis of grain boundary evolution and dynamic recrystallization of Inconel 625 superalloy at various hot spinning feed rates

在线全文

学校读者我要写书评

暂无评论

Progress in Natural Science:materials International 2024年第1期34卷 56-65页

作者： Zhanjie Jing Jiangkun Fan Xudong Liu Yuelin Song Zixiao Wang Kai Cao Yuetan Chen Heng Fu Jianing Zhang Jinshan Li State Key Laboratory of Solidification processing Northwestern Polytechnical University Chongqing Innovation center Northwestern Polytechnical University National&Local Joint Engineering Research center for Precision Thermoforming Technology of advanced Metal materials

Hot spinning can make the material withstand shear stress, so that the shape of the material has a great change,which is one of the main processing methods of nickel-based alloy plate members. Inconel 625 alloy, which has excellent high temperature mechanical properties and can be used as the main candidate material for aerospace applications, needs further study on its hot spinning deformation behavior and deformation mechanism. In this paper, the effect of feed rate on the microstructure evolution of Inconel 625 superalloy was studied by the electron backscattered diffraction technology. The microstructure with necklace-like structures composed of dynamic recrystallization(DRX) grains was observed after hot spinning. It was found that at the low feed rate, the promotion of DRX degree and grain refinement happened, where the grain size reached the trough of 10.99 μm under a feed rate of 300 mm/min. However, with the further feed rate rising, the degree of DRX was suppressed to a certain extent and grain size increased to 14.26 μm. On balance, the feed rate of 300 mm/min was the most efficient condition for grain refinement. Besides, it was revealed that both discontinuous dynamic recrystallization(DDRX) and continuous dynamic recrystallization(CDRX) occurred during hot spinning. DDRX includes the initial grain boundary nucleation by bulging and the annealing twin boundary assisted nucleation, while the CDRX mechanism is related to the continuous subgrain rotation within the deformed grain. DDRX is the main DRX mechanism.

关键词： Inconel 625 superalloy Hot spinning Grain boundary evolution DRX mechanism

Laser Powder Bed Fusion of Beta-Type Titanium Alloys for Biomedical Application:A Review

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 17-28页

作者： Xuan Luo Chao Yang Dongdong Li Lai-Chang Zhang State Key Laboratory of materials processing and Die&Mould Technology Huazhong University of Science and TechnologyWuhan430074China National Engineering Research center of Near-Net-Shape Forming for Metallic materials Guangdong Provincial Key Laboratory for Processing and Forming of Advanced Metallic MaterialsSouth China University of TechnologyGuangzhou510640China Centre for advanced materials and Manufacturing School of EngineeringEdith Cowan University270 Joondalup DriveJoondalupPerthWA6027Australia

Additive manufacturing ofβ-type titanium alloy is expected to replace Ti-6Al-4V alloy in the field of orthopedic implantation because of their low elastic modulus,excellent corrosion resistance,and *** briefly introducing the laser powder bed fusion(LPBF)process and physical phenomena,this paper reviews the recent progresses in LPBF-edβ-type Ti *** strategies to strengthening and tougheningβ-type Ti alloys are critically *** is followed by the processing routes employed to achieve to low modulus for orthopedic applications,especially a new methodology for tailoring crystallographic orientation called multi-track coupled directional *** effect of processing and compositions on performance metrics ofβ-type Ti alloys included corrosion behavior,and biocompatibility is *** the end,challenges in additive manufacturing ofβ-type Ti alloys in future are highlighted,with the aim to ensue clinical application of LPBF-edβ-type Ti alloys.

关键词： β-type Ti alloys Laser powder bed fusion Mechanical properties Elastic modulus Biocompatibility