检索结果-南通市图书馆

Journal of Energy Chemistry 2025年第1期100卷 621-627页

作者： Fei Lv Longjie Liu Jiazhe Wu Pengfei Wang Lixia Pan Dengwei Jing Yubin Chen International research center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

Combining water electrolysis and rechargeable battery technologies into a single system holds great promise for the co-production of hydrogen （H2） and ***,the design and development of such systems is still in its ***,an integrated hydrogen-oxygen （O2）-electricity co-production system featuring a bipolar membrane-assisted decoupled electrolyzer and a Na-Zn ion battery was established with sodium nickelhexacyanoferrate （NaNiHCF） and Zn2+/Zn as dual redox *** decoupled electrolyzer enables to produce H2and O2in different time and space with almost 100%Faradaic efficiency at 100 mA ***,the charged NaNiHCF and Zn electrodes after the electrolysis processes formed a Na-Zn ion battery,which can generate electricity with an average cell voltage of 1.75 V at 10 m A *** connecting Si photovoltaics with the modular electrochemical device,a well-matched solar driven system was built to convert the intermittent solar energy into hydrogen and electric energy with a solar to hydrogen-electricity efficiency of 16.7%,demonstrating the flexible storage and conversion of renewables.

关键词： Hydrogen Electricity Decoupled water electrolyzer Na-Zn ion battery Solar energy

Highly mass activity electrocatalysts with ultralow Pt loading on carbon black for hydrogen evolution reaction

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 182-190页

作者： Shaorou Ke Yajing Zhao Xin Min Yanghong Li Ruiyu Mi Yangai Liu Xiaowen Wu Minghao Fang Zhaohui Huang engineering research center of Ministry of Education for Geological Carbon Storage and Low Carbon Utilization of Resources Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid WastersNational Laboratory of Mineral MaterialsSchool of Materials Science and TechnologyChina University of Geosciences(Beijing)Beijing 100083China

Pt-based nanocatalysts offer excellent prospects for various ***,the low loading of Pt with excellent performance for efficient and stable nanocatalysts still presents a considerable *** this study,nanocatalysts with ultralow Pt content,excellent performance,and carbon black as support were prepared through in-situ ***~2-nm particles uniformly and stably dispersed on carbon black because of the strong s-p-d orbital hybridizations between carbon black and Pt,which suppressed the agglomeration of Pt *** unique structure is beneficial for the hydrogen evolution *** catalysts exhibited remarkable catalytic activity for hydrogen evolution reaction,exhibiting a potential of 100 mV at 100 mA·cm^(-2),which is comparable to those of commercial Pt/C *** activity(1.61 A/mg)was four times that of a commercial Pt/C catalyst(0.37 A/mg).The ultralow Pt loading(6.84wt%)paves the way for the development of next-generation electrocatalysts.

关键词： hydrogen evolution reaction ultralow platinum in-situ synthesis ultrasound

Multi boron-doping effects in hard carbon toward enhanced sodium ion storage

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 730-738页

作者： Peng Zheng Wang Zhou Ying Mo Biao Zheng Miaomiao Han Qin Zhong Wenwen Yang Peng Gao Lezhi Yang Jilei Liu College of materials Science and engineering Hunan Joint International Laboratory of Advanced Materials and Technology for Clean Energy Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology Hunan University Greater Bay Area Institute for Innovation Hunan University Changsha research Institute of Mining & Metallurgy Co. LTD.

Hard carbon （HC） has been considered as promising anode material for sodium-ion batteries （SIBs）.The optimization of hard carbon’s microstructure and solid electrolyte interface （SEI） property are demonstrated effective in enhancing the Na+storage capability,however,a one-step regulation strategy to achieve simultaneous multi-scale structures optimization is highly ***,we have systematically investigated the effects of boron doping on hard carbon’s microstructure and interface chemistry.A variety of structure characterizations show that appropriate amount of boron doping can increase the size of closed pores via rearrangement of carbon layers with improved graphitization degree,which provides more Na+storage ***-situ Fourier transform infrared spectroscopy/electrochemical impedance spectroscopy （FTIR/EIS） and X-ray photoelectron spectroscopy （XPS） analysis demonstrate the presence of more BC3and less B–C–O structures that result in enhanced ion diffusion kinetics and the formation of inorganic rich and robust SEI,which leads to facilitated charge transfer and excellent rate *** a result,the hard carbon anode with optimized boron doping content exhibits enhanced rate and cycling *** general,this work unravels the critical role of boron doping in optimizing the pore structure,interface chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced Na+storage performance.

关键词： X ray photoelectron spectroscopy

Cyano migration-mediated radical-polar crossover cyclopropanation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第01期 241-248页

作者： Ziqiang Wang Yasu Chen Jie Li Chen Zhu Key Laboratory of Organic Synthesis of Jiangsu Province College of Chemistry Chemical Engineering and Materials ScienceSoochow University Frontiers Science center for Transformative Molecules Zhangjiang Institute for Advanced Study and Shanghai Key Laboratory for Molecular Engineering of Chiral Drugs Shanghai Jiao Tong University

We report a novel cyano migration-mediated radical-polar crossover process, whereby both the sulfonylcyanation of aliphatic alkenes and the formation of cyclopropanes are concurrently achieved. This transformation yields a diverse array of multisubstituted cyclopropanes under mild photocatalytic conditions. Mechanistic studies elucidate that the reaction proceeds via intramolecular nucleophilic substitution, leading to the formation of the cyclopropane derivatives.

关键词：

同方期刊数据库

Double [5]carbohelicene: facile synthesis, chiroptical properties,isomerization study, and lasing application

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期 233-240页

作者： Peipei Liu Yantong Li Meng-Xiang Wu Hao Kang Xiao-Li Zhao Lin Xu Linlin Liu Xiaodong Li Junfeng Fang Zhiwei Fang Ya Cheng Hai-Bo Yang Huakang Yu Xueliang Shi State Key Laboratory of Petroleum molecular & Process engineering Shanghai Key Laboratory of Green Chemistry and Chemical ProcessesSchool of Chemistry and Molecular Engineering East China Normal University School of Physics and Optoelectronics South China University of Technology Institute of Polymer Optoelectronic materials & Devices State Key Laboratory of Luminescent Materials & Devices South China University of Technology School of Physics and Electronic Science Engineering Research Center of Nanophotonics & Advanced Instrument Ministry of EducationEast China Normal University State Key Laboratory of Precision Spectroscopy School of Physics and Electronic Science East China Normal University

Double carbohelicenes have attracted considerable attention due to their aesthetic structures, distinct π-conjugation extension, inherent chirality, and intriguing optical and electronic properties. Herein, the concise de novo synthesis of a new double[5]carbohelicene 1 together with its chiroptical properties, isomerization process and lasing application is presented. 1 was synthesized by a simple protocol involving the formation of a 6,6′-bipentacene as the key intermediate. It is worth noting that1 existed as two diastereomers 1-PP/MM and 1-PM, which were successfully isolated and unambiguously confirmed by Xray crystallography. The optical resolution of the racemic 1-PP/MM was successfully achieved by chiral-phase highperformance liquid chromatography（HPLC）, and 1-PP and 1-MM were characterized by circular dichroism. Interestingly, it was found that 1-PP/MM could be completely isomerized to 1-PM upon heating, and the detailed thermodynamics and kinetics of the isomerization process were systematically investigated. 1-PM exhibited deep-red luminescence with emission maximum at 723 nm and fluorescence quantum yield as high as 32.95%. Consequently, we can showcase the lasing application of 1-PM by doping with epoxy resin to assemble a bottle microlaser spontaneously, which the lasing wavelength is 796.6 nm at a threshold of 0.8 m J cm-2. We believe that our studies, including the facile synthesis methodology, detailed isomerization studies, and lasing application, will shed some light on the design and synthesis of novel carbohelical systems with more functions.

关键词：

同方期刊数据库

Superhydrophobic and corrosion-resistant siloxane-modified MgAl-LDHs coatings on magnesium alloy prepared under mild conditions

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 450-463页

作者： Wenxi Zhang Zhangzelong Zhuo Dan Xu Liang Wu Zhihui Xie Chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province College of Chemistry and Chemical EngineeringChina West Normal UniversityNanchong 637002China College of materials Science and engineering/National engineering research center for Magnesium Alloys Chongqing UniversityChongqing 400044China

We have developed a superhydrophobic and corrosion-resistant LDH-W/PFDTMS composite coating on the surface of Mg *** composite comprised a tungstate-intercalated(LDH-W)underlayer that was grown at low temperature(relative to hydrothermal reaction conditions)under atmospheric pressure and an outer polysiloxane layer created from a solution containing perfluorodecyltrimethoxysilane(PFDTMS)using a simple immersion *** successful intercalation of tungstate into the LDH phase and the following formation of the polysiloxane layer were confirmed through X-ray diffraction(XRD),Fourier transform infrared(FTIR)spectroscopy,and X-ray photoelectron spectroscopy(XPS).The corrosion resistance of the LDH-W film,both before and after the PFDTMS modification,was evaluated using electrochemical impedance spectroscopy(EIS),Tafel curves,and immersion *** results showed that Mg coated with LDH-W/PFDTMS exhibited significantly enhanced corrosion protection compared to the unmodified LDHW film,with no apparent signs of corrosion after exposure to 3.5wt%NaCl solution for 15 ***,the LDH-W/PFDTMS coating demonstrated superior superhydrophobicity and self-cleaning properties against water and several common beverages,as confirmed by static contact angle and water-repellency *** results offer valuable insights into preparing superhydrophobic and corrosion-resistant LDH-based composite coatings on Mg alloy surfaces under relatively mild reaction conditions.

关键词： Mg alloy corrosion coating layered double hydroxide

Sulfolane‑Based Flame‑Retardant Electrolyte for High‑Voltage Sodium‑Ion Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 498-516页

作者： Xuanlong He Jie Peng Qingyun Lin Meng Li Weibin Chen Pei Liu Tao Huang Zhencheng Huang Yuying Liu Jiaojiao Deng Shenghua Ye Xuming Yang Xiangzhong Ren Xiaoping Ouyang Jianhong Liu Biwei Xiao Jiangtao Hu Qianling Zhang Graphene Composite research center College of Chemistry and Environmental EngineeringShenzhen UniversityShenzhen 518060People’s Republic of China center of Electron Microscopy State Key Laboratory of Silicon and Advanced Semiconductor MaterialsSchool of Materials Science and EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China GRINM(Guangdong)research Institute for Advanced materials and Technology FoshanGuangdong 528051People’s Republic of China College of Energy engineering Zhejiang UniversityHangzhouZhejiang 310027People’s Republic of China School of materials Science and engineering Xiangtan UniversityXiangtan 411105People’s Republic of China Shenzhen Eigen-Equation Graphene Technology Co.Ltd Shenzhen 518000People’s Republic of China

Sodium-ion batteries hold great promise as next-generation energy storage ***,the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of *** particular,an unstable cathode–electrolyte interphase(CEI)leads to successive electrolyte side reactions,transition metal leaching and rapid capacity decay,which tends to be exacerbated under high-voltage ***,constructing dense and stable CEIs are crucial for high-performance *** work reports localized high-concentration electrolyte by incorporating a highly oxidation-resistant sulfolane solvent with non-solvent diluent 1H,1H,5H-octafluoropentyl-1,1,2,2-tetrafluoroethyl ether,which exhibited excellent oxidative stability and was able to form thin,dense and homogeneous *** excellent CEI enabled the O3-type layered oxide cathode NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2)(NaNMF)to achieve stable cycling,with a capacity retention of 79.48%after 300 cycles at 1 C and 81.15%after 400 cycles at 2 C with a high charging voltage of 4.2 *** addition,its nonflammable nature enhances the safety of *** work provides a viable pathway for the application of sulfolane-based electrolytes on SIBs and the design of next-generation high-voltage electrolytes.

关键词： Sodium-ion batteries Sulfolane-based electrolyte High voltage Layered oxide cathode Flame retardant

engineering atomic Rb-N configurations to tune radical pathways for highly selective photocatalytic H2O2 synthesis coupled with biomass valorization

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 215-225页

作者： Jiaye Li Shuang Pan Yihuang Chen Qiong Liu College of Chemistry and materials engineering Wenzhou University Guangdong Provincial Key Laboratory of Chemical Measurement and Emergency Test Technology (China) Institute of Analysis Guangdong Academy of Sciences (China National Analytical CenterGuangzhou)

Photocatalytic oxygen reduction for hydrogen peroxide （H2O2） synthesis presents a green and costeffective production ***,achieving highly selective H2O2synthesis remains challenging,necessitating precise control over free radical reaction pathways and minimizing undesirable oxidative ***,we report for the visible light-driven simultaneous co-photocatalytic reduction of O2to H2O2and oxidation of biomass using the atomic rubidium-nitride modified carbon nitride（CNRb）.The optimized CNRb catalyst demonstrates a record photoreduction rate of 8.01 mM h-1for H2O2generation and photooxidation rate of 3.75 mM h-1for furfuryl alcohol to furoic acid,achieving a remarkable solar-to-chemical conversion （SCC） efficiency of up to 2.27%.Experimental characterizations and DFT calculation disclosed that the introducing atomic Rb–N configurations allows for the high-selective generation of superoxide radicals while suppressing hydroxyl free radical *** is because the Rb–N serves as the new alternative site to perceive a stronger connection position for O2adsorption and reinforce the capability to extract protons,thereby triggering a high selective redox product *** study holds great potential in precisely regulating reactive radical processes at the atomic level,thereby paving the way for efficient synthesis of H2O2coupled with biomass valorization.

关键词： Atomic economy Radical pathway regulation Rubidium atom coordination Biomass valorization

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 154-168页

作者： Fei Weng Guijun Bi Youxiang Chew Shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng Key Laboratory for Liquid-Solid Structural Evolution and Processing of materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China Institute of Intelligent Manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore Institute of Manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

Establishing a new testing protocol of the electrochemical stability window for electric double-layer capacitors

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第01期 217-225页

作者： Ruilin Hou Xiaoxi Zhao Tingting Liang Qingyun Dou Shan Xu Xingbin Yan School of materials Science and engineering Sun Yat-sen University Laboratory of Clean Energy Chemistry and materials Lanzhou Institute of Chemical Physics Chinese Academy of Sciences College of engineering and Applied Sciences Nanjing University center of Industrial Analysis and Testing Guangdong Academy of Science

The electrochemical stability window(ESW) is crucial for determining the energy density of electric double-layer capacitors(EDLCs). However, current ESW testing protocols of EDLCs are strongly affected by artificial factors, thereby leading to unreliable result. To solve this problem, we first identify the key shortcomings of the traditional protocols by analyzing their test principles. Subsequently, taking an aqueous carbon-based EDLC as an example, we design a side reaction descriptor to represent the response difference in the charging capacitance to side reactions between the cyclic voltammetry and galvanostatic chargedischarge methods. With the aid of this descriptor, we propose a new ESW testing protocol, which is not only able to completely avoid the adverse influence of subjective factors but also fully consider the operating condition limitations. The protocol can be extended from the single electrode to the full device. This work proposes a more rigorous definition of ESW and provides a reliable protocol for evaluating the ESW of EDLCs.

关键词：

同方期刊数据库