检索结果-南通市图书馆

Nano-Micro Letters 2025年第2期17卷 169-186页

作者： Bitgaram Kim Myeong‑Chang Sung Gwang‑Hee Lee Byoungjoon Hwang Sojung Seo Ji‑Hun Seo Dong‑Wan Kim Department of materials Science and engineering Korea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea School of Civil Environmental and Architectural EngineeringKorea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea materials Science and Chemical engineering center Institute for Advanced Engineering(IAE)Yongin 17180Republic of Korea

A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety *** study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves ***-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain *** this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 *** situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen *** situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability *** present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.

关键词： Solid polymer electrolyte Lithium-oxygen batteries Polyrotaxane ion conductivity Hydrophobic chain

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 20-38页

作者： Qinjin Dai Xuefeng Liu Xin Ma Shaojie Tian Qinghe Cui Beijing Advanced Innovation center for materials Genome engineering University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic materials and Processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China Laboratory for Advanced materials Processing of Ministry of Education University of Science and Technology BeijingBeijing 100083China School of Mechanical and Electrical engineering Xinjiang Institute of EngineeringUrumqi 830023China

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine *** analysis has been used to characterize the shapes of metal materials at various scales and *** methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and ***,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal *** the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear *** relationship between the fractal dimensions and properties of metal material surfaces and interfaces is *** from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be *** is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

关键词： metal material surfaces and interfaces fractal analysis fractal dimension homogeneity

Li,Na,and Cs-based metal-organic frameworks for room temperature phosphorescence applications

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年

作者： Jiaqi Ma Rui Feng Yanyuan Jia Mingshi Zhang Shuo Guo College of Chemistry and Chemical engineering Inner Mongolia University School of materials Science and engineering Smart Sensing Interdisciplinary Science Center Nankai University & TKL of Metal and Molecule Based Material Chemistry Key Laboratory of Advanced Energy materials Chemistry (Ministry of Education) Nankai University Department of Chemistry and Biochemistry University of California San Diego

The conventional design of metal-organic frameworks (MOFs) with room-temperature phosphorescence (RTP) mostly relies on using heavy metals,as the heavy atom effect can effectively increase the efficiency of intersystem crossing (ISC) to get a better phosphorescence *** the first time,we reported the highly efficient RTP of a lithium-based MOF IMU-101 with a lifetime (τ) of 299 ms and a quantum yield (QY) of 4.91%.In addition,MOFs IMU-102 and IMU-103,with sodium and cesium as metal nodes,were successfully *** phosphorescence properties of this series of alkali metal MOFs were systematically studied and *** crystallography and computational calculation show that the mechanism for achieving RTP for this material lies in the ultrashort coordination bond of Li,which enables the reduction of non-radiative ***-101,as a cheap and environmentally friendly room-temperature phosphorescent material,has been further developed into composite polymer inks and bulk *** makes them promising for applications in anti-counterfeiting and information encryption.

关键词：

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 147-153页

作者： Junjie Li Wenbo Yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling Xue Wenning Liu Shoumei Xiong center of materials Science and engineering School of Mechanical and Electronic Control EngineeringBeijing Jiaotong UniversityBeijing 100044China Traffic&Transportation engineering Central South UniversityChangsha 410075China Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China School of materials Science and engineering Tsinghua UniversityBeijing 100084China

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile *** can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated ***,the development of non-heat treatment Al alloys is becoming the hot *** addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of *** achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and *** influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic *** results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased ***,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical *** introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

关键词： aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

A general stabilizing strategy based on vitamin C for n-type organic semiconductors

在线全文

学校读者我要写书评

暂无评论

Science China materials 2025年第01期 303-304页

作者： Hui Huang College of materials Science and Opto-Electronic Technology Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences

Organic semiconductors (OSCs), as an emerging next-generation semiconductor material, hold promising prospects in fields such as flexible displays, electronic skins, smart healthcare,and the Internet of Things, due to their excellent flexibility,solution processability, and tunable band structures [1,2]. These molecules are often classified into n-type and p-type, depending on whether the prevalent charge carriers are electrons or holes[3].

关键词：

同方期刊数据库

Efficient and Stable Photoassisted Lithium‑Ion Battery Enabled by Photocathode with Synergistically Boosted Carriers Dynamics

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 440-454页

作者： Zelin Ma Shiyao Wang Zhuangzhuang Ma Juan Li Luomeng Zhao Zhihuan Li Shiyuan Wang Yazhou Shuang Jiulong Wang Fang Wang Weiwei Xia Jie Jian Yibo He Junjie Wang Pengfei Guo Hongqiang Wang State Key Laboratory of Solidification Processing Center for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene(NPU)Xi’an 710072People’s Republic of China State Key Laboratory of Solidification Processing School of Materials Science and Engineering DepartmentNorthwestern Polytechnical UniversityXi’an 710072People’s Republic of China State Key Laboratory of Solidification Processing Center of Advanced Lubrication and Seal MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072People’s Republic of China Research and Development Institute of Northwestern Polytechnical University in Shenzhen Shenzhen 518063People’s Republic of China Key Laboratory of Applied Surface and Colloid Chemistry Shaanxi Key Laboratory for Advanced Energy DevicesShaanxi Engineering Lab for Advanced Energy TechnologySchool of Materials Science and EngineeringNational Ministry of EducationShaanxi Normal UniversityXi’an 710119People’s Republic of China

Efficient and stable photocathodes with versatility are of significance in photoassisted lithium-ion batteries(PLIBs),while there is always a request on fast carrier transport in electrochemical active *** work proposes a general approach of creating bulk heterojunction to boost the carrier mobility of photocathodes by simply laser assisted embedding of plasmonic *** employed in PLIBs,it was found effective for synchronously enhanced photocharge separation and transport in light charging ***,experimental photon spectroscopy,finite difference time domain method simulation and theoretical analyses demonstrate that the improved carrier dynamics are driven by the plasmonic-induced hot electron injection from metal to TiO_(2),as well as the enhanced conductivity in TiO2 matrix due to the formation of oxygen vacancies after Schottky *** from these merits,several benchmark values in performance of TiO2-based photocathode applied in PLIBs are set,including the capacity of 276 mAh g^(−1)at 0.2 A g^(−1)under illumination,photoconversion efficiency of 1.276%at 3 A g^(−1),less capacity and Columbic efficiency loss even through 200 *** results exemplify the potential of the bulk heterojunction strategy in developing highly efficient and stable photoassisted energy storage systems.

关键词： Photoassisted lithium-ion batteries Bulk heterojunction Carrier dynamics TiO2 nanofiber Plasmonic metal nanocrystals

Highly mass activity electrocatalysts with ultralow Pt loading on carbon black for hydrogen evolution reaction

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 182-190页

作者： Shaorou Ke Yajing Zhao Xin Min Yanghong Li Ruiyu Mi Yangai Liu Xiaowen Wu Minghao Fang Zhaohui Huang engineering Research center of Ministry of Education for Geological Carbon Storage and Low Carbon Utilization of Resources Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid WastersNational Laboratory of Mineral MaterialsSchool of Materials Science and TechnologyChina University of Geosciences(Beijing)Beijing 100083China

Pt-based nanocatalysts offer excellent prospects for various ***,the low loading of Pt with excellent performance for efficient and stable nanocatalysts still presents a considerable *** this study,nanocatalysts with ultralow Pt content,excellent performance,and carbon black as support were prepared through in-situ ***~2-nm particles uniformly and stably dispersed on carbon black because of the strong s-p-d orbital hybridizations between carbon black and Pt,which suppressed the agglomeration of Pt *** unique structure is beneficial for the hydrogen evolution *** catalysts exhibited remarkable catalytic activity for hydrogen evolution reaction,exhibiting a potential of 100 mV at 100 mA·cm^(-2),which is comparable to those of commercial Pt/C *** activity(1.61 A/mg)was four times that of a commercial Pt/C catalyst(0.37 A/mg).The ultralow Pt loading(6.84wt%)paves the way for the development of next-generation electrocatalysts.

关键词： hydrogen evolution reaction ultralow platinum in-situ synthesis ultrasound

Sulfolane‑Based Flame‑Retardant Electrolyte for High‑Voltage Sodium‑Ion Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 498-516页

作者： Xuanlong He Jie Peng Qingyun Lin Meng Li Weibin Chen Pei Liu Tao Huang Zhencheng Huang Yuying Liu Jiaojiao Deng Shenghua Ye Xuming Yang Xiangzhong Ren Xiaoping Ouyang Jianhong Liu Biwei Xiao Jiangtao Hu Qianling Zhang Graphene Composite Research center College of Chemistry and Environmental EngineeringShenzhen UniversityShenzhen 518060People’s Republic of China center of Electron Microscopy State Key Laboratory of Silicon and Advanced Semiconductor MaterialsSchool of Materials Science and EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China GRINM(Guangdong)Research Institute for Advanced materials and Technology FoshanGuangdong 528051People’s Republic of China College of Energy engineering Zhejiang UniversityHangzhouZhejiang 310027People’s Republic of China School of materials Science and engineering Xiangtan UniversityXiangtan 411105People’s Republic of China Shenzhen Eigen-Equation Graphene Technology Co.Ltd Shenzhen 518000People’s Republic of China

Sodium-ion batteries hold great promise as next-generation energy storage ***,the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of *** particular,an unstable cathode–electrolyte interphase(CEI)leads to successive electrolyte side reactions,transition metal leaching and rapid capacity decay,which tends to be exacerbated under high-voltage ***,constructing dense and stable CEIs are crucial for high-performance *** work reports localized high-concentration electrolyte by incorporating a highly oxidation-resistant sulfolane solvent with non-solvent diluent 1H,1H,5H-octafluoropentyl-1,1,2,2-tetrafluoroethyl ether,which exhibited excellent oxidative stability and was able to form thin,dense and homogeneous *** excellent CEI enabled the O3-type layered oxide cathode NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2)(NaNMF)to achieve stable cycling,with a capacity retention of 79.48%after 300 cycles at 1 C and 81.15%after 400 cycles at 2 C with a high charging voltage of 4.2 *** addition,its nonflammable nature enhances the safety of *** work provides a viable pathway for the application of sulfolane-based electrolytes on SIBs and the design of next-generation high-voltage electrolytes.

关键词： Sodium-ion batteries Sulfolane-based electrolyte High voltage Layered oxide cathode Flame retardant

Direct Photolithography of WO_(x)Nanoparticles for High‑Resolution Non‑Emissive Displays

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 297-309页

作者： Chang Gu Guojian Yang Wenxuan Wang Aiyan Shi Wenjuan Fang Lei Qian Xiaofei Hu Ting Zhang Chaoyu Xiang Yu‑Mo Zhang Laboratory of Optoelectronic Information Technology and Devices Ningbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingbo 315201People’s Republic of China Hangzhou Bay Laboratory of Advanced Nano‑Optoelectronic materials and Devices Qianwan Institute of CNITECHNingbo 315336People’s Republic of China smart materials for Architecture Research Lab Innovation Center of Yangtze River DeltaZhejiang UniversityJiaxing 314100People’s Republic of China University of Science and Technology of China Hefei 230026People’s Republic of China State Key Lab of Supramolecular Structure and materials College of ChemistryJilin UniversityChangchun 130012People’s Republic of China

High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy ***,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron ***,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand *** strategy enabled us to achieve ultra-high resolution efficiently(line widthmaterials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,*** success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.

关键词： Electrochromic Direct photolithography WOx nanoparticles In situ photo-induced ligand exchange High-resolution displays

Multiple dynamic bonds enable high mechanical strength and efficient room-temperature self-healable polyurethane for triboelectric nanogenerators

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年

作者： Wenwen Zhang Huixia Xuan Xiaofei Xu Jiaming Lou Qingbao Guan Zhengwei You State Key Laboratory for Modification of Chemical Fibers and Polymer materials Institute of Functional Materials College of Materials Science and Engineering Shanghai Key Laboratory of Lightweight Composite Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine Donghua University

For room temperature self-healing triboelectric nanogenerators（TENGs）, the inherent contradiction between mechanical strength and self-healing properties was an urgent problem to be solved. Based on the phenol-carbamate bond, this paper proposed a strategy to design a new molecular structure and coordinate the triple dynamic bonds, which provided a feasible strategy to solve this contradiction. With polytetramethylene ether glycol（M_n= 1,000） as the soft segment in the main chain of polyurethane（PU）, meanwhile methylene diphenyl diisocyanate and 4,4′-dihydroxybiphenyl（BP） as the hard segment and chain extension agent, respectively, the combination of tetrad benzene ring endowed the resultant 4BP-PU with π-π interaction. The effective reversible dissociation and association with hydrogen bond not only bestowed 4BP-PU with high mechanical strength（16.14 MPa）, but also promoted high self-healing efficiency（94.8%） at room temperature. 4BP-PU was selected as the elastic substrate between polydimethylsiloxane and copper sheet to prepare a self-healing TENG to collect energy from natural ***, the rational molecular structure design provided new ideas for developing self-healing materials and fabricating energy harvest electronics.

关键词：