检索结果-南通市图书馆

Research on the navigation method of large-scale differential tail-control improvised guided munitions based on rotational speed constraints

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第8期38卷 155-170页

作者： Ning Liu Wenjiang Zhao Yao Wang Kai Shen Zhong Su Wenhao Qi Yuedong Xie beijing Key Laboratory of High Dynamic Navigation Technology Beijing Information Science and Technology UniversityBeijing100192China Hua an Industry group co. Ltd.Qiqihar161006China Integrated Navigation and Intelligent Navigation Laboratory Beijing Institute of TechnologyBeijing100081China beijing Institute of Technology Beijing100081China

In the process of launching guided projectile under the conventional system, it is difficult to effectively obtain the precise navigation parameters of the projectile in the high dynamic environment. Aiming at this problem, this paper describes a new system of guided ammunition based on tail spin reduction. After analyzing the mechanism of the ammunition's tail spin reduction, a navigation method of large scale difference tail control simple guided ammunition based on speed constraint is proposed. In this method,the corresponding navigation constraints can be carried out by combining the rotation speed state of the ammunition itself, and the optimal solution of navigation parameters during the flight of the missile can be obtained by Extended Kalman Filter(EKF). Finally, the performance of the proposed method was verified by the simulation environment, and the hardware-in-the-loop simulation test and flight test were carried out to verify the performance of the method in the real environment. The experimental results show that the proposed method can achieve the optimal estimation of navigation parameters for simple guided ammunition with large-scale difference tail control. Under the conditions of simulation test and hardware-in-loop simulation test, the position and velocity errors calculated by the method in this paper converged. Under the condition of flight test, the spatial average error calculated by the method described in this paper is 6.17 m, and the spatial error of the final landing point is 3.50 *** this method, the accurate acquisition of navigation parameters in the process of projectile launching is effectively realized.

关键词： Guided projectiles Tail spin reduction RPM constraints combined navigation Extended Kalman filter(EKF)

Multi-performance evaluation of high-throughput accelerated corrosion test for high-strength low-alloy 921A steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1260-1278页

作者： cong-cong Du Ming-hua Qin Zhan-fang Wu Dong-ling Li Lei Zhao Xiang-yang Li Hai-zhou Wang beijing Advanced Innovation Center for Materials Genome Engineering National Center for Materials Service SafetyUniversity of Science and Technology BeijingBeijing100083China China Iron and Steel Research Institute group co. Ltd.Beijing100081China beijing Advanced Innovation Center for Materials Genome Engineering Central Iron and Steel Research InstituteBeijing100081China

The corrosion behavior of high-strength low-alloy 921A steel in a simulated marine atmospheric environment was studied using a high-throughput experimental *** corrosion behavior,corrosion morphology,and corrosion products of 921A steels were analyzed using various techniques,including corrosion mass loss method,polarization curve,white-light interferometry,scanning electron microscopy,energy-dispersive spectrometry,microbeam X-ray fluorescence spectrometry,X-ray diffraction technique,and X-ray photoelectron *** test results indicated that 921A steel exhibits better corrosion resistance than Q450NQR1 steel in simulated harsh atmospheric environments,as evidenced by a lower corrosion mass loss rate throughout the corrosion *** corrosion products of both steels consisted ofα-FeOOH,Fe_(3)O_(4),andγ-FeOOH,withα-FeOOH being more prevalent in the rust layer of 921A steel than in Q450NQR1 *** inner rust layer of 921A steel also exhibited an appositional enrichment region of Cr,Ni,Mo,and V,leading to its superior corrosion resistance compared to that of Q450NQR1 *** efficacy of high-throughput accelerated corrosion experimental methods was highlighted for evaluating the corrosion resistance of steel materials in harsh environmental *** findings suggest that 921A steel exhibits better corrosion resistance compared to Q450NQR1 steel and has the potential to be more suitable in harsh marine atmospheric *** characterization of the rust layer structures and composition reveals the parallel enrichment of certain elements in the inner rust layer of 921A steel,which enhances its corrosion resistance.

关键词： Atmospheric corrosion High-throughput experimental method High-strength low-alloy steel corrosion characteristics Rust layer Element enrichment

Cross-Modal consistency with Aesthetic Similarity for Multimodal False Information Detection

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

computers, Materials & continua 2024年第5期79卷 2723-2741页

作者： Weijian Fan Ziwei Shi State Key Laboratory of Media convergence and communication Communication University of ChinaBeijing100024China Software Research Institute China United Network Communication Group Co.Ltd.Beijing100024China

With the explosive growth of false information on social media platforms, the automatic detection of multimodalfalse information has received increasing attention. Recent research has significantly contributed to multimodalinformation exchange and fusion, with many methods attempting to integrate unimodal features to generatemultimodal news representations. However, they still need to fully explore the hierarchical and complex semanticcorrelations between different modal contents, severely limiting their performance detecting multimodal falseinformation. This work proposes a two-stage detection framework for multimodal false information detection,called ASMFD, which is based on image aesthetic similarity to segment and explores the consistency andinconsistency features of images and texts. Specifically, we first use the contrastive Language-Image Pre-training(CLIP) model to learn the relationship between text and images through label awareness and train an imageaesthetic attribute scorer using an aesthetic attribute dataset. Then, we calculate the aesthetic similarity betweenthe image and related images and use this similarity as a threshold to divide the multimodal correlation matrixinto consistency and inconsistencymatrices. Finally, the fusionmodule is designed to identify essential features fordetectingmultimodal false information. In extensive experiments on four datasets, the performance of the ASMFDis superior to state-of-the-art baseline methods.

关键词： Social media false information detection image aesthetic assessment cross-modal consistency

A Survey on Blockchain-Based Federated Learning:Categorization,Application and Analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

computer Modeling in Engineering & Sciences 2024年第6期139卷 2451-2477页

作者： Yuming Tang Yitian Zhang Tao Niu Zhen Li Zijian Zhang Huaping Chen Long Zhang School of Cyberspace Science&Technology Beijing Institute of TechnologyBeijing100081China School of computer Science&Technology Beijing Institute of TechnologyBeijing100081China Southeast Institute of Information Technology Beijing Institute of TechnologyPutian351100China Qianxin Technology group co. Ltd.Beijing100044China

Federated Learning(FL),as an emergent paradigm in privacy-preserving machine learning,has garnered significant interest from scholars and engineers across both academic and industrial *** its innovative approach to model training across distributed networks,FL has its vulnerabilities;the centralized server-client architecture introduces risks of single-point ***,the integrity of the global model—a cornerstone of FL—is susceptible to compromise through poisoning attacks by malicious *** attacks and the potential for privacy leakage via inference starkly undermine FL’s foundational privacy and security *** these reasons,some participants unwilling use their private data to train a model,which is a bottleneck in the development and industrialization of federated *** technology,characterized by its decentralized ledger system,offers a compelling solution to these *** inherently prevents single-point failures and,through its incentive mechanisms,motivates participants to contribute computing ***,blockchain-based FL(BCFL)emerges as a natural progression to address FL’s *** study begins with concise introductions to federated learning and blockchain technologies,followed by a formal analysis of the specific problems that FL *** discusses the challenges of combining the two technologies and presents an overview of the latest cryptographic solutions that prevent privacy leakage during communication and incentives in *** addition,this research examines the use of BCFL in various fields,such as the Internet of Things and the Internet of ***,it assesses the effectiveness of these solutions.

关键词： Federated learning blockchain privacy-preserving

Study on tungsten sintering temperature field based on electromagnetic simulation and computational fluid dynamics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tungsten 2024年第2期6卷 355-366页

作者： Lu-Yan Wang Yue-Guang Yu Jian-Xin Dong Kai-Ping Du Shan-Yu Liu Cao-Bing Li University of Science and Technology beijing Beijing 100083China BGRIMM Technology group Beijing 100160China China Iron&Steel Research Institute group Beijing 100081China

In order to study the influence of various sintering variables more intuitively and clearly,electromagnetic field analysis and computational fl uid dynamics are used to analyze the infl uence of gas flow,heating power and other process parameters on the temperature range of medium-frequency sintering in this *** results indicate that the uniformity of temperature fi eld is determined by the gas flow rate and heating *** the heating power is 50 kW,the stable temperature drops about 10 K for every 1 m^(3)·h^(−1)increase of hydrogen *** peak value of the maximum temperature diff erence on the tungsten rods gradually increases with the increase of the hydrogen flow rate,and it appears slightly *** temperature distribution of tungsten rods in furnace is similar with diff erent hydrogen flow *** the same time,the closer to the furnace wall,the higher the temperature of the tungsten *** temperature diff erence between tungsten rods mainly occurred within 1 h after the beginning of *** the heating power can improve the stable temperature,but has little eff ect on the heating *** heating power can increase the peak value of the maximum temperature diff erence on the tungsten rods,but has little eff ect on the occurrence time of the peak value of the maximum temperature diff erence on the tungsten *** the heating power will increase the temperature diff erence of a single tungsten rod,but the temperature diff erence of a single tungsten rod never exceeds 65 *** study can be used to guide the process optimization *** with numerical simulation calculation,the sintering parameters with low energy consumption and high temperature uniformity can be quickly and eff ectively found,thus improving the microstructure and properties of sintered tungsten products.

关键词： Tungsten products Sintering Hydrogen flow rate Heating power

Fracture geometry and breakdown pressure of radial borehole fracturing in multiple layers

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 430-444页

作者： Yu-Ning Yong Zhao-Quan Guo Shou-Ceng Tian Lu-Yao Ma Tian-Yu Wang Mao Sheng National Key Laboratory of Petroleum Resources and Engineering China University of Petroleum(Beijing)Beijing102249China beijing Petroleum Machinery company Limited CNPC Engineering Technology R&D Company LimitedBeijing102206China Smart Energy co. LtdChina Xiongan GroupXiong’an New Area071000HebeiChina

Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas *** paper aims to investigate fracture propagation and pressure characteristics of radial borehole fracturing in multiple layers.A series of laboratory experiments with artificial rock samples(395 mm×395 mm×395 mm)was conducted using a true triaxial fracturing *** crucial factors corresponding to the vertical distance of adjacent radial borehole layers(vertical distance),the azimuth and diameter of the radial borehole are *** results show that radial borehole fracturing in multiple layers generates diverse fracture *** types of fractures are identified based on the connectivity between hydraulic fractures and radial *** vertical distance significantly influences fracture propagation perpendicular to the radial borehole *** increase in the vertical distance impedes fracture connection across multiple radial borehole layers and reduces the fracture propagation distance along the radial borehole *** azimuth also influences fracture propagation along the radial borehole *** the azimuth reduces the guiding ability of radial boreholes,which makes the fracture quickly curve to the maximum horizontal stress *** breakdown pressure correlates with diverse fracture geometries *** the fractures connect multi-layer radial boreholes,increasing the vertical distance decreases the breakdown *** the azimuth and increasing the diameter also decrease the breakdown *** extrusion force exists between the adjacent fractures generated in radial boreholes in multiple rows,which plays a crucial role in enhancing the guiding ability of radial boreholes and results in higher breakdown *** research provides valuable theoretical insights for the field application of radial borehole fracturing technology in tight oil and g

关键词： Multi-layer radial boreholes Hydraulic fracturing Fracture propagation Pressure characteristic

Three-dimensional Modeling of Ore-forming Elements and Mineralization Prognosis for the Yechangping Mo Deposit,Henan Province,China

在线全文

学校读者我要写书评

暂无评论

Acta Geologica Sinica(English Edition) 2024年第3期98卷 736-752页

作者： DING Gaoming JI Genyuan YAN Guolong XU Yongzhong WANG Kunming XIAO Chun WANG Quanle GUO Dongbao China National Administration of coal Geology Beijing 100038China MNR Key Laboratory of Metallogeny and Mineral Assessment Institute of Mineral ResourcesCAGSBeijing 100037China China Gold group Geological co. Ltd.Beijing 100011China China Gold group ZhongYuan Mining co. Ltd.SanmenxiaHenan 472000China Lanzhou Mineral Exploration Institute of Gansu Nonferrous Metal Geological Exploration Bureau Lanzhou 730046China

Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep *** approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking *** Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China *** borehole data on oreforming elements underpin deep geochemical *** methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.

关键词： 3D geochemical model ore-forming elements geostatistics deep mineralization prediction Yechangping Mo deposit

Small-scale fire tests in the underwater tunnel section model with new sidewall smoke extraction

在线全文

学校读者我要写书评

暂无评论

Deep Underground Science and Engineering 2024年第2期3卷 247-254页

作者： Shunyu Yue Ruifeng Miao Huihang Cheng Maohua Zhong Xiujun Yang Department of Engineering Physics Institute of Public Safety ResearchTsinghua UniversityBeijingChina Shanxi Province Expressway group Limited Liability company Shanxi Expressway group Shuoshen co. LtdShuozhouChina Research Institute of Highway Ministry of Transport RIOH Transport ConsultantsLtdBeijingChina

The Shenzhen–Zhongshan Bridge is a 24‐km‐long bridge and tunnel system,including a 6.8-km-long super cross section subsea *** solve the smoke exhaust problem of a super large cross-section subsea tunnel,the tunnel has a new smoke exhaust system that combines a horizontal smoke exhaust cross section at the top and sidewall smoke exhaust *** order to evaluate the potential fire hazards of this type of tunnel,a 1:30 tunnel model was established and 140 smallscale experiments on underwater tunnel fires were *** changing the fire power,fire location,and fan operation mode,different scenarios of submarine immersed tunnel fire were simulated and the related key parameters such as fire smoke diffusion behavior and smoke temperature distribution were *** this basis,the optimal smoke control strategy was proposed for different fire *** research results indicate that the new smoke exhaust system can fully utilize the smoke flow characteristics,significantly improve smoke exhaust efficiency,and increase available evacuation time,thus further enhancing the fire safety of super large cross-section subsea tunnels.

关键词： sidewall smoke extraction system small‐scale fire tests smoke control

Magnesium-containing pellet regulating blast furnace ferrous burden interaction:softening-melting behavior and mechanism

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1623-1635页

作者： Li-ming Ma Jian-liang Zhang Yao-zu Wang Xiao-yong Ma Gui-lin Wang Zhuo Li Hui-qing Jiang Zheng-jian Liu School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China School of Intelligence Science and Technology University of Science and Technology BeijingBeijing 100083China Lingyuan Iron and Steel group co. Lingyuan 122500LiaoningChina

MgO participates in all stages of sintering,pelletizing,and blast furnace ironmaking,and synergistically optimizing the distribution of MgO in ferrous burden can effectively enhance the interaction within the ferrous burdens and optimize the softening-melting properties of the mixed ***-containing pellets mixed with low-MgO sinter or mixed with high-MgO sinter in the blast furnace ferrous burden structure have opposite softening-melting performance *** the structure of the ferrous burden is magnesium-containing pellets mixed with low-MgO sinter,the magnesium-containing pellets can enhance the interaction of the ferrous burden in the process of softening-melting,which can optimize the composition of the slag phase and improve the slag *** the structure of the ferrous burden is magnesium-containing pellets mixed with high-MgO sinter,the magnesium-containing pellets weaken the interaction of the ferrous burden in the process of softening-melting,increase the content of the high melting point solid-phase particles in the slag,lead to an increase in the viscosity of the slag and difficult separation of the slag and iron,and decrease the permeability of the charge ***,to ensure good permeability of the mixed burden,the following measures are suggested:optimizing the MgO distribution of the ferrous burden,reducing the MgO content of the sinter to 1.96 wt.%,increasing the MgO content of the pellets to 1.03-1.30 wt.%,controlling the MgO/Al_(2)O_(3) ratio of the mixed burden within 1.15-1.32,narrowing the position of the cohesive zone,and maintaining an S value(permeability index)of approximately 150 kPa℃.

关键词： Ironmaking Ferrous burden Softening-melting property Interaction Permeability Slag