检索结果-南通市图书馆

Exploring the Effect of Plasticity on the Phase Imaging of TM-AFM Through Molecular Dynamics Simulations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第2期37卷 297-304页

作者： Guolin Liu Yu Zeng Yaxin Chen Zheng Wei School of Mechanical and Electrical Engineering Beijing University of Chemical TechnologyBeijing100029China

In the tapping-mode atomic force microscope(TM-AFM),the probe tip continuously taps the sample surface,which may cause plastic deformation of the sample and result in energy *** energy dissipation of the probe is closely related to the scanned phase *** quantify the energy dissipation due to plastic indentations of the sample,this study utilized a combination of molecular dynamics(MD)simulations and experiments on single-crystal copper samples,including multiple nano-indentation *** energy dissipation of the probe due to the plastic deformation of the sample was calculated by integrating the hysteresis curve of the indentation depth versus the force applied to the *** simulation results are in good agreement with the experimental *** sets of results have demonstrated that the plastic energy dissipation decreases as the number of indentations increases,and eventually the energy of the probe tends to *** equilibrium energy dissipation is associated with other dissipation ***,it was observed that,after hundreds of taps,the dissipated energy of plastic deformation could be ignored,implying that the scanned image may not reflect the plasticity information of the sample after multiple taps of the probe on the sample surface for scanning.

关键词： Atomic force microscopy Force-distance curves Nano-indentations Plasticity Molecular dynamics

In vitro performance of a biodegradable zinc alloy adjustable-loop cortical suspension fixation for anterior cruciate ligament reconstruction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 887-898页

作者： Ting Wang Zhangzhi Shi Hongyong Zhong Xiangmin Li Jinling Sun Wei Yin Xiaojing Ji Qiang Wang Anqi Zhao Luning Wang School of Materials Science and Engineering University of Science and Technology BeijingBeijing 100083China

Anterior cruciate ligament(ACL)injuries of the knee are one of the most common and serious athletic *** widely used cortical suspension fixation buttons for ligament reconstruction are permanent implants,particularly those made from conventional steel or titanium *** this study,a biodegradable Zn-0.45Mn-0.2Mg(ZMM42)alloy with the yield strength of 300.4 MPa and tensile strength of 329.8 MPa was prepared through hot *** use of zinc alloys in the preparation of cortical suspension fixation buttons was proposed for the first *** 35 d of immersion in simulated body fluids,the ZMM42 alloy fixation buttons were degraded at a rate of 44μm/a,and the fixation strength was retained(379.55 N)in the traction ***,the ZMM42 alloy fixation buttons exhibited an increase in MC3T3-E1 cell viability and high antibacterial activity against Escherichia coli and Staphylococcus *** results reveal the potential of biodegradable zinc alloys for use as ligament reconstruction materials and for developing diverse zinc alloy cortical suspension fixation devices.

关键词： anterior cruciate ligament reconstruction zinc alloy fixation buttons mechanical property corrosion behavior biocompatibility

Water modeling on fluid flow and mixing phenomena in a BOF steelmaking converter

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第3期31卷 595-607页

作者： Xin-yu Cai Hao-jian Duan Ding-han Li Anjun Xu Li-feng Zhang School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing 100083China School of Mechanical and Materials Engineering North China University of TechnologyBeijing 100144China

A 1∶8 physical water model was constructed to investigate the fluid flow and mixing phenomena in the basic oxygen furnace(BOF)*** particle image velocimetry was employed to measure the velocity distribution of the bath and the high-speed camera was applied to capture the cavity shape in the combined blowing BOF *** mixing time for varied operating conditions was measured by the stimulus-response *** cavity depth increased with the decrease in the lance height and the increase in the top gas flow rate while the bottom blowing gas had little influence on the cavity *** minimum cavity depth was obtained under the condition of a 69.8 m^(3)/h top gas flow rate,a 287.5 mm lance height and a 0.93 m^(3)/h bottom blowing gas flow rate,which was 161.2 *** mixing time decreased as the lance height decreased and the top blowing gas flow rate *** mixing time was first decreased and then increased with the increase in the bottom gas flow *** the condition of 69.8 m^(3)/h gas flow rate of top blowing,the 287.5 mm lance height and the 0.93 m^(3)/h gas flow rate of bottom blowing,the mixing time in the converter was 48.65 *** empirical formula between the stirring power and the mixing time in the converter was calculated.

关键词： Water model Fluid flow Particle image velocimetry Mixing time BOF converter

Lead-free metal halide scintillator materials for imaging applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第8期67卷 85-101页

作者： Junzhe LIN Dan GUO Tianrui ZHAI Department of Physics and Optoelectronic Engineering Beijing University of Technology

High-energy radiation detection and imaging technology has significant applications in highenergy physics research, medical imaging, and industrial monitoring. Lead-free metal halides exhibit exceptional potential for conducting indirect detection of high-energy radiation due to their characteristics of low toxicity, strong stability, high light yield, and large Stokes shift. This paper reviews the most recent advances in lead-free metal halide scintillator materials for X-ray imaging. Subsequently, it lists the most important parameters of scintillator performance and introduces the production procedures for single crystal, powder,and nanocrystal scintillators. Furthermore, it discusses the manufacturing of scintillator films with improved performance, focusing on large-area flexible scintillator films and the coupling with microstructures. Finally,it discusses current challenges and opportunities for enhancing X-ray imaging using lead-free metal halide scintillator materials.

关键词： film imaging lead-free metal halide luminescence scintillators

Paraffin–CaCl_(2)·6H_(2)O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第1期31卷 60-70页

作者： Hai Li Aibing Jin Shuaijun Chen Yiqing Zhao You Ju Key Laboratory of Ministry of Education for Efficient Mining and Safety of Metal Mine University of Science and Technology BeijingBeijing 100083China School of Civil and Resources Engineering University of Science and Technology BeijingBeijing 100083China

The challenge of high temperatures in deep mining remains harmful to the health of workers and their production efficiency The addition of phase change materials (PCMs) to filling slurry and the use of the cold storage function of these materials to reduce downhole temperatures is an effective approach to alleviate the aforementioned ***–CaCl_(2)·6H_(2)O composite PCM was prepared in the *** composition,phase change latent heat,thermal conductivity,and cemented tailing backfill (CTB) compressive strength of the new material were *** heat transfer characteristics and endothermic effect of the PCM were simulated using Fluent *** results showed the following:(1) The new paraffin–CaCl_(2)·6H_(2)O composite PCM improved the thermal conductivity of native paraffin while avoiding the water solubility of CaCl_(2)·6H_(2)O.(2) The calculation formula of the thermal conductivity of CaCl_(2)·6H_(2)O combined with paraffin was deduced,and the reasons were explained in principle.(3) The“enthalpy–mass scale model”was applied to calculate the phase change latent heat of nonreactive composite PCMs.(4)The addition of the paraffin–CaCl_(2)·6H_(2)O composite PCM reduced the CTB strength but increased its heat absorption *** research can give a theoretical foundation for the use of heat storage backfill in green mines.

关键词： paraffin–CaCl_(2)·6H_(2)O heat transfer simulation heat calculation phase change material-based backfill latent heat of formula

Magnesium-containing pellet regulating blast furnace ferrous burden interaction:softening-melting behavior and mechanism

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1623-1635页

作者： Li-ming Ma Jian-liang Zhang Yao-zu Wang Xiao-yong Ma Gui-lin Wang Zhuo Li Hui-qing Jiang Zheng-jian Liu School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China School of Intelligence Science and technology University of Science and Technology BeijingBeijing 100083China Lingyuan Iron and Steel Group Co. Lingyuan 122500LiaoningChina

MgO participates in all stages of sintering,pelletizing,and blast furnace ironmaking,and synergistically optimizing the distribution of MgO in ferrous burden can effectively enhance the interaction within the ferrous burdens and optimize the softening-melting properties of the mixed ***-containing pellets mixed with low-MgO sinter or mixed with high-MgO sinter in the blast furnace ferrous burden structure have opposite softening-melting performance *** the structure of the ferrous burden is magnesium-containing pellets mixed with low-MgO sinter,the magnesium-containing pellets can enhance the interaction of the ferrous burden in the process of softening-melting,which can optimize the composition of the slag phase and improve the slag *** the structure of the ferrous burden is magnesium-containing pellets mixed with high-MgO sinter,the magnesium-containing pellets weaken the interaction of the ferrous burden in the process of softening-melting,increase the content of the high melting point solid-phase particles in the slag,lead to an increase in the viscosity of the slag and difficult separation of the slag and iron,and decrease the permeability of the charge ***,to ensure good permeability of the mixed burden,the following measures are suggested:optimizing the MgO distribution of the ferrous burden,reducing the MgO content of the sinter to 1.96 wt.%,increasing the MgO content of the pellets to 1.03-1.30 wt.%,controlling the MgO/Al_(2)O_(3) ratio of the mixed burden within 1.15-1.32,narrowing the position of the cohesive zone,and maintaining an S value(permeability index)of approximately 150 kPa℃.

关键词： Ironmaking Ferrous burden Softening-melting property Interaction Permeability Slag

Developing an atmospheric aging evaluation model of acrylic coatings:A semi-supervised machine learning algorithm

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1617-1627页

作者： Yiran Li Zhongheng Fu Xiangyang Yu Zhihui Jin Haiyan Gong Lingwei Ma Xiaogang Li Dawei Zhang beijing Advanced Innovation Center for Materials Genome Engineering Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National Materials Corrosion and Protection Data Center University of Science and Technology BeijingBeijing 100083China BRI Southeast Asia Network for Corrosion and Protection(MOE) Shunde Innovation School of University of Science and Technology BeijingFoshan 528399China

To study the atmospheric aging of acrylic coatings,a two-year aging exposure experiment was conducted in 13 representative climatic environments in *** atmospheric aging evaluation model of acrylic coatings was developed based on aging data including11 environmental factors from 567 cities.A hybrid method of random forest and Spearman correlation analysis was used to reduce the redundancy and multicollinearity of the data set by dimensionality reduction.A semi-supervised collaborative trained regression model was developed with the environmental factors as input and the low-frequency impedance modulus values of the electrochemical impedance spectra of acrylic coatings in 3.5wt%NaCl solution as *** model improves accuracy compared to supervised learning algorithms model(support vector machines model).The model provides a new method for the rapid evaluation of the aging performance of acrylic coatings,and may also serve as a reference to evaluate the aging performance of other organic coatings.

关键词： acrylic coatings coatings aging atmospheric environment machine learning

Numerical Study on the Aerodynamic and Fluid−Structure Interaction of An NREL-5MW Wind Turbine

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第3期38卷 363-378页

作者： ZHAO Mi YU Wan-li WANG Pi-guang QU Yang DU Xiu-li Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education Beijing University of TechnologyBeijing 100124China State Key Laboratory of Bridge Engineering Safety and Resilience Beijing University of TechnologyBeijing 100124China

A 5-MW wind turbine has been modeled and analyzed for fluid-structure interaction and aerodynamic *** this study, a full-scale model of a 5-MW wind turbine is first developed based on a computational fluid dynamics(CFD) approach, in which the unsteady, noncompressible Reynolds Averaged Navier-Stokes(RANS) method is used. The main focus of the study is to analyze the tower shadow effect on the aerodynamic performance of the wind turbine under different inlet flow conditions. Subsequently, the finite element model is established by considering fluid/structure interactions to study the structural stress, displacement, strain distributions and flow field information of the structure under the uniform wind speed. Finally, the fluid-structure interaction model is established by considering turbulent wind and the tower shadow effect. The variation rules of the dynamic response of the one-way and two-way fluid-structure interaction(FSI) models under different wind speeds are analyzed, and the numerical calculation results are compared with those of the centralized mass model. The results show that the tower shadow effect and structural deformation are the main factors affecting the aerodynamic load fluctuation of the wind turbine, which in turn affects the aerodynamic performance and structural stability of the blades. The structural dynamic response of the coupled model shows significant similarity, while the structural displacement response of the former exhibits less fluctuation compared with the conventional centralized mass model. The one-way fluid-structure interaction(FSI)model shows a higher frequency of stress-strain and displacement oscillations on the blade compared with the two-way FSI model.

关键词： computational fluid dynamics methods(CFD) tower shadow effect aerodynamic performance fluidstructure interaction space flow field

A hybrid attention model based on first-order statistical features for smoke recognition

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第3期67卷 809-822页

作者： GUO Nan LIU JiaHui DI KeXin GU Ke QIAO JunFei beijing Laboratory of Smart Environmental Protection Beijing Key Laboratory of Computational Intelligence and Intelligent SystemBeijing Artificial Intelligence InstituteBeijing 100124China Faculty of Information technology Beijing University of TechnologyBeijing 100124China

Smoke and fire recognition are of great importance on foreseeing fire disasters and preventing environmental pollution by monitoring the burning process of objects(e.g., straw, fuels). However, since fire images suffer from problems like the variability of the features, complexity of scenarios, interference from background, changeable weather conditions as well as image quality problems, identifying smoke and fire accurately and promptly from a given image still remains a substantial challenge. Automatically learning the features of smoke images by CNNs has improved the target recognition ability compared to traditional approaches,nonetheless, convolutions and pooling operations in CNNs may cause severe information loss which may lead to *** tackle the above problems, this paper proposed a hybrid attention model based on the characteristics of smoke images. This model adopted multiple optimized attention mechanism in several stages to quickly and precisely capture the important features,achieving state-of-the-art performance on smoke and fire recognition in terms of accuracy and speed. Our proposed module mainly consists of two stages: pooling and attention. In the first stage, we conducted several newly proposed first-order pooling methods. Through traversing the data space in a larger scope, features are better reserved, thus constructing a more intact feature space of smoke and fire in an image. In the second stage, feature maps are aggregated together to perform channel and spatial attention. The channel and spatial dependencies allow us to quickly catch the important features presented in an image. By fully exploring the feature space and prominent salient features, characteristics of smoke and fire are better presented so as to obtain better smoke and fire detection results. Experiments have been conducted on public smoke detection dataset and new proposed fine-grained smoke and fire detection database. Experimental results revealed that the propose

关键词： hybrid attention first-order pooling smoke and fire detection deep convolutional neural networks