检索结果-南通市图书馆

Journal of energy Chemistry 2024年第10期97卷 419-428页

作者： Yu Liu Kun Lang Huifang Han Huijing Liu Yao Fu Pengchen Zou Yinhui Lyu Jia Xu Jianxi Yao State key laboratory of Alternate Electrical Power System with Renewable energy Sources Beijing Key Laboratory of Energy Safety and Clean Utilization North China Electric Power University

CsPbI2Br perovskite solar cell has been extensively studied due to its exceptional thermal stability and relatively stable perovskite phase ***,the presence of bromine leads to a rapid crystallization rate of CsPbI2Br films,resulting in small grain size and high defect ***,CsPbI2Br demonstrates poor light absorption due to its wide ***,it is crucial to control the crystallization rate and increase the film thickness to reduce defect density,enhance light absorption,and improve photovoltaic *** this study,we utilized a PbAc2-incorporated twice spincoating（PTS） process to address these ***,PbAc2was added to the CsPbI2Br precursor solution to form a CsPbI2Br film,which was then coated with the CsPbI2Br precursor solution to produce the PTS film,Ac-can delay the perovskite crystallization,leading to the formation of thicker and denser CsPbI2Br ***,lone-pair electrons of the oxygen atom provided by Ac-formed coordination bonds with under-coordinated Pb2+ions to fill halogen ion vacancies,thereby reducing the defect ***,the PTS CsPbI2Br device achieved a peak power conversion efficiency（PCE） of 16.19% and maintained 96.7% of its initial PCE over 1500 h at room temperature under 25% relative humidity without any encapsulation.

关键词： Crystallization management CsPbI2Br PbAc2 Perovskite solar cells Twice spin-coating process

Improving anammox activity and reactor start-up speed by using CO_(2)/NaHCO_(3) buffer

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第5期139卷 60-71页

作者： Shaoan Cheng Huahua Li Xinyuan He Hua Chen Longxin Li State key laboratory of clean energy utilization College of Energy EngineeringZhejiang UniversityHangzhou 310027China

Anammox bacteria grow slowly and can be affected by large pH *** suitable buffers could make the start-up of anammox reactors easy and *** this study,the effects of three kinds of buffers on the nitrogen removal and growth characteristics of anammox sludge were *** with CO_(2)/NaHCO_(3)buffer solution(CCBS)performed the best in nitrogen removal,while 4-(2-hydroxyerhyl)piperazine-1-ethanesulfonic acid(HEPES)and phosphate buffer solution(PBS)inhibited the anammox *** with 50 mmol/L CCBS could start up in 20 days,showing the specific anammox activity and anammox activity of 1.01±0.10 gN/(gVSS·day)and 0.83±0.06 kgN/(m^(3)·day),*** Kuenenia was the dominant anammox bacteria,with a relative abundance of 71.8%.Notably,anammox reactors could also start quickly by using 50 mmol/L CCBS under nonstrict anaerobic *** findings are meaningful for the quick start-up of engineered anammox reactors and prompt enrichment of anammox bacteria.

关键词： Anammox bacteria Buffer solution CO_(2)/NaHCO_(3) Physiological characteristics Microbial community shift

A clean disposal method of carbide slag with carbon emission reduction:Used as a flux for iron ore sintering Author links open overlay panel

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 303-314页

作者： Hanxiao Meng Jiankang Wang Xiang Liu Kelang Jin Lei Zhang Hao Zhou State key laboratory of clean energy utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou310027China

Limestone or quicklime is a necessary flux in the iron ore sintering *** production and application process will cause CO_(2) emissions and various environmental pollution,but this has not attracted enough *** slag(CS)is a calcium-rich solid waste produced in acetylene production,the harmless disposal of which is still incomplete,resulting in soil and groundwater *** study investigated the granulation characteristics and sintering performance of the sintering mixture with different proportions of *** results show that replacing limestone with an appropriate proportion of CS is promising and beneficial to the formation of high-quality bonding *** CS accounts for 75%of the total mass of CS and limestone,the tumbler index increases by 8.10%and the comprehensive index decreases only from 100 to 96.16,which is within the acceptable *** application of CS in iron ore sintering can achieve a clean disposal of it and a considerable carbon emission reduction,as the main component of which is Ca(OH)2.

关键词： Ironore sintering Carbide slag Flux Carbon emission Comprehensive index

Experimental Investigation and X-Ray Computed Microtomography Simulation on Thermal Physical Properties of Foundation Materials after Molten Salt Leakage in the Storage Tank

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 591-601页

作者： WANG Zhaowen ZHOU Hao LUO Jiawei LI Yawei FANG Hao LIU Tianxiao State key laboratory of clean energy utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou310027China

This paper studied the thermal physical properties of foundation materials in the molten salt tank of thermal energy storage system after molten salt leakage by Transient plane source experiment and X-ray computed microtomography simulation *** microstructure,thermal properties and pressure resistance with different particle diameters were *** measured heat conductivities from Transient plane source experiment for three cases are 0.49 W/(m·K),0.48 W/(m·K),and 0.51 W/(m·K),and the porosity is 30.1%,30.7%,and 31.2% *** heat conductivity simulating results of three cases are 0.471 W/(m·K),0.482W/(m·K),and 0.513 W/(m·K).The ratio of difference between the results of simulation and Transient plane source measurement is as low as 1.2%,verifying the reliability of experimental and simulation results to a certain *** with the heat conductivity of 0.097-0.129 W/(m·K) and porosity of 71.6%-78.9% without leaking salt,the porosity is reduced by more than 50% while the heat conductivity increased by 4 to 5 times after molten salt *** significant increase in heat conductivity has a great impact on security operation,structure design,and modeling of the tank foundation for solar power plants.

关键词： heat conductivity X-ray computed microtomography foundation materials three-phase threshold algorithm molten salt leakage

Copper slag assisted coke reduction of phosphogypsum for sulphur dioxide preparation

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第1期65卷 43-53页

作者： Dong Ma Qinhui Wang State key laboratory of clean energy utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou 310027China

The reduction of phosphogypsum(PG)to lime slag and SO_(2)using coke can effectively alleviate the environmental problems caused by ***,the PG decomposition temperature remains high and the product yield remains *** adding additives,the decomposition temperature can be further reduced and PG decomposition rate and product yield can be ***,the use of current additives such as Fe_(2)O_(3)and SiO_(2)brings the problem of increasing economic ***,it is proposed to use solid waste copper slag(CS)as a new additive to reduce PG to prepare SO2,which can reduce the cost and meet the environmental benefits at the same *** effects of proportion,temperature and thermostatic time on PG decomposition are investigated by experimental and kinetic analysis combined with FactSage thermodynamic calculations to optimize the roasting ***,the reaction mechanism is *** is found that adding CS to the coke and PG system can increase the rate of PG decomposition and SO_(2)yield while lowering the PG decomposition *** example,when the CS/PG mass ratio increases from 0 to 1,PG decomposition rate increases from 83.38%to 99.35%,SO_(2)yield increases from 78.62%to 96.81%,and PG decomposition temperature decreases from 992.4℃to 949.6℃.The optimal reaction parameters are CS/PG mass ratio of 1,Coke/PG mass ratio of 0.06 at 1100℃for 20 min with 99.35%PG decomposition rate and 96.81%SO_(2) *** process proceeds according to the following reactions:2CaSO_(4)+ 0.7C + 0.8Fe_(2)SiO_(4)→0.8Ca_(2)SiO_(4)+ 0.2Ca_(2)Fe_(2)O_(5)+ 0.4Fe_(3)O_(4)+2SO_(2)+ 0.7CO_(2)Finally,a process for decomposing PG with coke and CS is proposed.

关键词： Phosphogypsum Sulfur dioxide Copper slag Fluidized-bed Reduction Waste treatment

Promoting effect of FeOx addition on the mechanochemically prepared vanadium-based catalyst for real PCDD/Fs removal and mechanism insight

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第3期137卷 478-487页

作者： Minghui Tang Ling Wang Hongxian Li Xinlei Huang Cuicui Du Shengyong Lu State key laboratory for clean energy utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou 310027China

Industrial-use VOx-based catalysts usually have a higher active temperature window (>250-300℃),which becomes a“bottleneck”for the practical application of PCDD/Fs catalytic degradation *** this work,VO_(x)-FeO_(x)/TiO_(2) catalyst prepared via mechanochemically method was investigated for the catalytic removal of PCDD/*** removal efficiency of 1,2-DCBz,pure PCDD/Fs gas generated in the lab,PCDD/Fs from actual fue gas,long-term were studied,and the degradation mechanism was explored using FTIR and *** degradation efficiency of 1,2-DCBz and PCDD/Fs on VO_(x)-FeO_(x)/TiO_(2) were higher than that of VO_(x)/TiO_(2)catalyst,and the optimal FeOx addition ratio was 3 wt.%.The characterization results show that the addition of FeOx can effectively improve the pore structure,surface acidity,and VOx dispersion of the catalyst,thus contributing to increasing the V^(5+)content and surface-active oxygen,which is conducive to the improvement of adsorption and redox performance of the *** the actual MSWI (municipal solid waste incineration)fue gas,the PCDD/Fs removal efficiency over VTi-3Fe-MC maintained long-term stability,higher than 85%for 240 *** result was not significantly reduced compared with the data obtained in the *** to the analysis results of intermediate products by FTIR and GC-TOFMS,it can be inferred that the epoxidation fracture of benzene ring is the rate-limiting step of dioxin catalytic degradation *** work gives an in-depth view into the PCDD/Fs removal over VO_(x)-FeO_(x)/TiO_(2) catalysts and could provide guidelines for the rational design of reliable catalysts for industrial applications.

关键词： PCDD/F removal MSWI fue gas VO_(x)-FeO_(x)/TiO_(2) Mechanochemical GC-TOFMS

Effect of CO_(2) Opposing Multiple Jets on Thermoacoustic Instability and NO_(x) Emissions in a Lean-Premixed Model Combustor

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第1期33卷 207-221页

作者： ZHOU Hao HU Liubin Institute for Thermal Power Engineering State Key Laboratory of Clean Energy UtilizationZhejiang UniversityHangzhou 310027China

This paper experimentally studied the effect of CO_(2) opposing multiple jets on the thermoacoustic instability and NO_(x) emissions in a lean-premixed model *** feasibility was verified from three variables:the CO_(2) jet flow rate,hole numbers,and hole diameters of the *** indicate that the control effect of thermoacoustic instability and NO_x emissions show a reverse trend with the increase of open area ratio on the whole,and the optimal jet flow rate range is 1-4 L/min with CO_(2) opposing multiple *** this flow rate range,the amplitude and frequency of the dynamic pressure and heat release signals CH~* basically decrease as the CO_(2) flow rate increases,which avoids high-frequency and high-amplitude thermoacoustic *** amplitude-damped ratio of dynamic pressure and CH*can reach as high as 98.75% and 93.64% with an optimal open area ratio of 3.72%.NO_(x) emissions also decrease as the jet flow rate increases,and the maximum suppression ratio can reach 68.14%.Besides,the flame shape changes from a steep inverted "V" to a more flat "M",and the flame length will become shorter with CO_(2) opposing multiple *** research achieved the synchronous control of thermoacoustic instability and NO_(x) emissions,which could be a design reference for constructing a safer and cleaner combustor.

关键词： thermoacoustic instability lean-premixed model combustor CO_(2)opposing multiple jets open area ratio NO_(x)emissions

Enhanced photoelectrochemical water splitting with a donor-acceptor polyimide

在线全文

学校读者我要写书评

暂无评论

Frontiers in energy 2024年第4期18卷 463-473页

作者： Hongyu QU Xiaoyu XU Longfei HONG Xintie WANG Yifei ZAN Huiyan ZHANG Xiao ZHANG Sheng CHU key laboratory of energy Thermal Conversion and Control of the Ministry of Education School of Energy and EnvironmentSoutheast UniversityNanjing 210096China State key laboratory of clean energy utilization Zhejiang UniversityHangzhou 310027China

Polyimide(PI)has emerged as a promising organic photocatalyst owing to its distinct advantages of high visible-light response,facile synthesis,molecularly tunable donor-acceptor structure,and excellent physicochemical ***,the synthesis of high-quality PI photoelectrode remains a challenge,and photoelectrochemical(PEC)water splitting for PI has been less ***,the synthesis of uniform PI photoelectrode films via a simple spin-coating method was reported,and their PEC properties were investigated using melamine as donor and various anhydrides as *** influence of the conjugate size of aromatic unit(phenyl,biphenyl,naphthalene,perylene)of electron acceptor on PEC performance were studied,where naphthalene-based PI photoelectrode exhibited the highest photocurrent *** is resulted from the unification of widerange light absorption,efficient charge separation and transport,and strong photooxidation *** paper expands the material library of polymer films for PEC applications and contributes to the rational design of efficient polymer photoelectrodes.

关键词： polyimide(PI)film photoelectrochemistry band structure engineering aromatic unit

Bubble dynamics properties of B-particles in a quasi-2D gas-solid fluidized bed:Computational particle fluid dynamics numerical simulation and post-processed by digital image analysis technique

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 223-238页

作者： Zemin Yuan Zhong Huang Guotao Qin Guanjia Zhao Suxia Ma Hairui Yang Guangxi Yue key laboratory of clean and Efficient Combustion and utilization in the Circulating Fluidized Bed Taiyuan University ofTechnologyTaiyuan030024China Department of energy and Power Engineering Tsinghua UniversityBeijing100084.China

Bubble dynamics properties play a crucial and significant role in the design and optimization of gas-solid fluidized *** this study,the bubble dynamics properties of four B-particles were investigated in a quasi-two-dimensional(quasi-2D)fluidized bed,including bubble equivalent diameter,bubble size distribution,average bubble density,bubble aspect ratio,bubble hold-up,bed expansion ratio,bubble radial position,and bubble *** studies were performed by computational particle fluid dynamics(CPFD)numerical simulation and post-processed with digital image analysis(DIA)technique,at superficial gas velocities ranging from 2u_(mf) to 7u_(mf).The simulated results shown that the CPFD simulation combining with DIA technique post-processing could be used as a reliable method for simulating bubble dynamics properties in quasi-2D gas-solid fluidized ***,it seemed not desirable for the simulation of bubble motion near the air distributor at higher superficial gas velocity from the simulated average bubble density *** superficial gas velocity significantly affected the bubble equivalent diameter and evolution,while it had little influence on bubble size distribution and bubble aspect ratio distribution for the same *** time-averaged bubble hold-up and bed expansion ratio increased with the increase of superficial gas *** core-annular flow structures could be found in the fluidized bed for all *** average bubble rising velocity increased with the increasing bubble equivalent *** bubble lateral movement,the smaller bubbles might be more susceptible,and superficial gas velocity had a little influence on the absolute lateral velocity of *** simulated results presented a valuable and novel approach for studying bubble dynamics *** comprehensive understanding of bubble dynamics behaviors in quasi-2D gas-solid fluidized beds would provide support in the design,operation,and optimization of gas-solid

关键词： Bubble dynamics properties CPFD simulation Quasi-2D gas-solid fluidized bed Digital image analysis

Sodium Nitrate/Formamide Deep Eutectic Solvent as Flame-Retardant and Anticorrosive Electrolyte Enabling 2.6 V Safe Supercapacitors with Long Cyclic Stability

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

energy & Environmental Materials 2024年第3期7卷 378-387页

作者： Huachao Yang Yiheng Qi Zifan Wang Qinghu Pan Chuanzhi Zhang Jianhua Yan Kefa Cen Zheng Bo Kostya (Ken) Ostrikov State key laboratory of clean energy utilization College of Energy Engineering Zhejiang University School of Chemistry and Physics and QUT Centre for Materials Science Queensland University of Technology (QUT)

Safe operation of electrochemical capacitors （supercapacitors） is hindered by the flammability of commercial organic ***-flammable Waterin-Salt （WIS） electrolytes are promising alternatives; however,they are plagued by the limited operation voltage window （typically≤2.3 V） and inherent corrosion of current ***,a novel deep eutectic solvent（DES）-based electrolyte which uses formamide （FMD） as hydrogen-bond donor and sodium nitrate （NaNO3） as hydrogen-bond acceptor is *** electrolyte exhibits the wide electrochemical stability window （3.14 V）,high electrical conductivity (14.01 mS cm-1),good flameretardance,anticorrosive property,and ultralow cost （7%of the commercial electrolyte and 2%of WIS）.Raman spectroscopy and Density Functional Theory calculations reveal that the hydrogen bonds between the FMD molecules and NO3-ions are primarily responsible for the superior stability and *** developed NaNO3/FMD-based coin cell supercapacitor is among the best-performing state-of-art DES and WIS devices,evidenced by the high voltage window （2.6 V）,outstanding energy and power densities(22.77 Wh kg-1at 630 W kg-1and 17.37 kW kg-1at 12.55 Wh kg-1),ultralong cyclic stability （86%after 30 000 cycles）,and negligible current collector *** NaNO3/FMD industry adoption potential is demonstrated by fabricating 100 F pouch cell supercapacitors using commercial aluminum current collectors.

关键词： cyclic stability deep eutectic solvents electrical conductivity electrochemical stability window supercapacitors