检索结果-南通市图书馆

Non-equilibrium kinetic separation of thulium,yttrium and erbium on the surface of freely rising oil droplets

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第1期42卷 200-209,I0007页

作者： Na Sui Shukai Miao Kaihui Cui Fancheng Meng Kun Huang School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing100083China beijing key laboratory of green recovery and extraction of rare and precious metals University of Science and Technology BeijingBeijing100083China key laboratory of green Process and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China

It is difficult to achieve selective separation and enrichment of different rare earths from high abundance yttrium ores efficiently only dependent on their discrepancy in thermodynamic properties.The present work suggests a new strategy based on non-equilibrium kinetic separation of Er and Tm on the surface of freely rising oil droplets to control the separation order of Y.It is revealed that the mutual separation of Er/Tm is significantly promoted with the separation coefficient of 2.89 during the non-equilibrium extraction with the addition of diethylenetriaminepentaacetic acid(DTPA).The extraction sequence of Tm,Er and Y can be controlled as Tm>Y>Er,thus Y can be selectively enriched during the process of separation of Er and Tm,Such a sequence is subject to the controllable dissociation rates of RE(Ⅲ)-DTPA complexes and extraction abilities of P507 with the three RE(Ⅲ)ions.The dissociation rate is dependent on the stabilities of RE(Ⅲ)-DTPA complexes and follows the sequence ofY(Ⅲ)—DTPA Er>Y to Tm>Y>Er.

关键词： DTPA Interface interaction Non-equilibrium kinetic separation rare earths P507

Cycling performance of layered oxide cathode materials for sodium-ion batteries

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1720-1744页

作者： Jinpin Wu Junhang Tian Xueyi Sun Weidong Zhuang School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China State key laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China beijing key laboratory for green recovery and extraction of rare and precious metals University of Science and Technology BeijingBeijing 100083China

Layered oxide is a promising cathode material for sodium-ion batteries because of its high-capacity,high operating voltage,and simple synthesis.Cycling performance is an important criterion for evaluating the application prospects of batteries.However,facing challenges,including phase transitions,ambient stability,side reactions,and irreversible anionic oxygen activity,the cycling performance of layered oxide cathode materials still cannot meet the application requirements.Therefore,this review proposes several strategies to address these challenges.First,bulk doping is introduced from three aspects:cationic single doping,anionic single doping,and multi-ion doping.Second,homogeneous surface coating and concentration gradient modification are reviewed.In addition,methods such as mixed structure design,particle engineering,high-entropy material construction,and integrated modification are proposed.Finally,a summary and outlook provide a new horizon for developing and modifying layered oxide cathode materials.

关键词： sodium-ion battery layered oxide materials cycling performance bulking doping surface coating concentration gradient mixed structure high-entropy

Orange-red emitting Sr_3LaTa_3O_(12):Sm^(3+) phosphors with perovskite structure and high thermal stability for w-LEDs

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第3期42卷 464-472,I0002页

作者： Xiaopeng Hu Anlin Zhang Yufeng Du Li Zhou Changlin Li Jingjing Lian Zhequan Zou Xuan Ouyang Bin Deng Lianwu Xie Ruijin Yu College of Chemistry Biology and Environmental Engineering Xiangnan UniversityChenzhou423043China College of Sciences Central South University of Forestry and TechnologyChangsha410004China College of Chemistry&Pharmacy Northwest A&F UniversityYangling712100China Hunan Provincial key laboratory of Xiangnan rare-precious metals Compounds Research and Application Xiangnan UniversityChenzhou423043China

A novel layered perovskite tantalate phosphor Sr_(3)LaTa_(3)O_(12):Sm^(3+)(SLTO:Sm^(3+)) with orange-red emission was obtained for the first time via the solid-phase synthetic method. The phase purity, surface morphology,element distribution and luminescent properties of the SLTO:xSm^(3+)(x= 0.01 mol%-0.30 mol%) phosphors were investigated. Under 408 nm excitation, the optimum doped SLTO:0.10Sm^(3+) phosphor emits orangered light at 598 nm with the highest emission peak(4G_(5/2)→6H_(7/2)). The critical energy transfer distance is 1.687 nm. The prepared SLTO:0.10Sm^(3+)phosphor has excellent thermal stability with temperature quenching temperature(T_(0.5)> 500 K) and high activation energy(E_(a)= 0.25 e V). Through calculation, the chromaticity coordinates of all samples are concentrated in the orange-red area, and the color purity reaches 99%. The fabricated white light-emitting diode(w-LED) has a good correlated color temperature(5132 K), a high R_(a)(89), and the CIE chromaticity coordinates(0.340, 0.327). Consequently, the superiority of orange-red-emitting tantalate SLTO:Sm^(3+) phosphors for w-LEDs is demonstrated.

关键词： Tantalate Sr_(3)LaTa_(3)O_(12) Sm^(3+) Luminescence LED rare earths

Synthesis of substitutional hexaboride of lanthanum and cerium La_(1-x)Ce_(x)B_(6) via aluminothermic reduction

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2023年第11期41卷 1780-1788,I0005页

作者： Yu Wang Xiao-Hui Yang Jian Cui Guo-Hua Zhang State key laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing100083China beijing key laboratory of green recovery and extraction of rare and precious metals University of Science and Technology BeijingBeijing 100083China

rare-earth hexaborides(REB_(6))are vital raw materials for cathode materials and high temperature structural ceramics that are widely applied as high-frequency electron tubes and ceramics adaptive for extreme environment,respectively.In this work,single phase substitutional solid solution REB_(6)(LaB_(6),La_(0.75)Ce_(0.25)B_(6).La_(0.5)Ce_(0.5)B_(6),La_(0.25)Ce_(0.75)B_(6) and CeB_(6))powders were prepared with the raw materials of La_(2)O_(3),CeO_(2),B_(4)C and Al powders,after calcining at 1773 K for 4 h and the following alkaline leaching.All substitutional solid solution products have homogeneous distributions of La and Ce in particles.Through microscopic morphology analysis,it is discovered that the formation of solid solution is beneficial for reducing the particle size of product,relative to LaB_(6) and CeB_(6).Moreover,Al flux plays an important role in decarbonizing reaction,and C contents of all products are below 0.4 wt%.

关键词： Hexaboride Substitutional solid solution Aluminothermic reduction rare earths

Self-supporting and hierarchically porous Ni_(x)Fe-S/NiFe_(2)O_(4) heterostructure as a bifunctional electrocatalyst for fluctuating overall water splitting

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2022年第5期29卷 1120-1131页

作者： Wenjing Yan Jintao Zhang Aijing Lü Songle Lu Yiwei Zhong Mingyong Wang State key laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China beijing key laboratory of green recovery and extraction of rare and precious metals University of Science and Technology BeijingBeijing 100083China

Stable non-noble metal bifunctional electrocatalysts are one of the challenges to the fluctuating overall water splitting driven by re-newable energy.Herein,a novel self-supporting hierarchically porous Ni_(x)Fe-S/NiFe_(2)O_(4) heterostructure as bifunctional electrocatalyst was constructed based on porous Ni-Fe electrodeposition on three-dimensional(3D)carbon fiber cloth,in situ oxidation,and chemical sulfuration.Results showed that the Ni_(x)Fe-S/NiFe_(2)O_(4) heterostructure with a large specific surface area exhibits good bifunctional activity and stability for both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)because of the abundance of active sites,synergistic effect of the heterostructure,superhydrophilic surface,and stable,self-supporting structure.The results further confirmed that the Ni_(x)Fe-S phase in the heterostructure is transformed into metal oxides/hydroxides and Ni_(3)S_(2) during OER.Compared with the commercial 20wt%Pt/C||IrO_(2)-Ta_(2)O_(5) electrolyzer,the self-supporting Ni1/5Fe-S/NiFe_(2)O_(4)||Ni1/2Fe-S/NiFe_(2)O_(4) electrolyzer exhibits better stability and lower cell voltage in the fluctu-ating current density range of 10-500 mA/cm^(2).Particularly,the cell voltage of Ni1/5Fe-S/NiFe_(2)O_(4)||Ni1/2Fe-S/NiFe_(2)O_(4) is only approximately 3.91 V at an industrial current density of 500 mA/cm^(2),which is lower than that of the 20wt%Pt/C||IrO_(2)-Ta_(2)O_(5) electrolyzer(i.e.,approximately 4.79 V).This work provides a promising strategy to develop excellent bifunctional electrocatalysts for fluctuating overall water splitting.

关键词： self-supporting hierarchically porous structure heterostructure bifunctional catalyst overall water splitting

The effect of secondary phase on corrosion behaviors of the titanium–zirconium–molybdenum alloy

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第2期6卷 342-354页

作者： Song-Wei Ge Ping Hu Jie Deng Shi-Lei Li Hai-Rui Xing Jia-Yu Han Xing-Jiang Hua Li Wang Jun-Zhou Yang Bo Jin Wen Zhang Kuai-She Wang School of Metallurgy Engineering Xi’an University of Architecture and TechnologyXi’an 710055China National and Local Joint Engineering Research Center for Functional Materials Processing Xi’an University of Architecture and TechnologyXi’an 710055China Western Xinxing rare and precious metals Co. Ltd.Shangluo 726000China Northwest Institute for Non-Ferrous Metal Research Xi’an 710016China

As the range of applications for molybdenum and its alloys has expanded,the corrosive environment for molybdenum alloys has become more demanding.In the past,the content of doping elements has been studied to investigate their infl uence on the corrosion performance of titanium–zirconium–molybdenum(TZM)alloys.In this paper,it is considered that the second phase in the alloy is the main factor aff ecting the corrosion performance of TZM alloys.By comparing the corrosion behavior of molybdenum metal and TZM alloy,the eff ect of the secondary phase on corrosion behaviors of TZM alloy has been investigated.The results show that the second phase reduces the corrosion resistance of the TZM alloy.The potential of the second phase is 73.7 mV higher than that of the Mo matrix,which contributes to the formation of microscopic electric couples.Under the action of microscopic electric couples,pitting corrosion is preferentially formed at the interface between the second phase and the matrix,which accelerates the corrosion of the matrix.This paper provides a theoretical basis for the application of TZM alloys in corrosive environments.

关键词： Secondary phase Electrochemical corrosion Titanium–zirconium–molybdenum(TZM) Galvanic corrosion Corrosion resistance

Phase transfer-based high-efficiency recycling of precious metal electrocatalysts

在线全文

学校读者我要写书评

暂无评论

green Chemical Engineering 2024年第1期5卷 68-74页

作者： Qing Zeng Shaonan Tian Yu Zhang Hui Liu Dong Chen Xinlong Tian Chaoquan Hu Jun Yang State key laboratory of Multiphase Complex Systems Institute of Process EngineeringChinese Academy of SciencesBeijing100190China State key laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine ChemistrySchool of Chemical Engineering and TechnologyHainan UniversityHaikou570228China Nanjing IPE Institute of green Manufacturing Industry Nanjing211100China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing100049China

Recycling precious metals with high-efficiency is undoubtedly beneficial to optimize resource utilization for environmental remediation and sustainable development.Herein,we report an efficient route to recycle the palladium(Pd)and platinum(Pt)electrocatalysts using a phase transfer method.This strategy involves acidic dissolution of deactivated precious metal(Pd/Pt)electrocatalysts from their loading substrates,mixing with an ethanolic solution of dodecylamine(DDA),subsequent extraction of metal ions into a non-polar organic phase,and final reduction by sodium borohydride to reproduce high-performance electrocatalysts towards typical electrochemical reactions,e.g.,oxygen reduction reaction(ORR)and ethanol oxidation reaction(EOR).In specific,the transfer efficiencies are up to 98%and the final recovery rate is over 85%for Pd and Pt electrocatalysts in each cycle.This approach symbolizes a facile and efficient way to recover precious metals,which might be applied to recycling a wide range of metals in various realms after appropriate modifications.

关键词： precious metal Phase transfer extraction recovery Electrocatalyst

2D/2D heterostructured MoS_(2)/PtSe_(2) promoting charge separation in FTO thin film for efficient and stable photocatalytic hydrogen evolution

在线全文

学校读者我要写书评

暂无评论

rare metals 2022年第5期41卷 1735-1742页

作者： Shu-Tong Wan Hao-Tong Li Zhen-Hui Ma He-Chuan Zhang Yan-Zhen Zheng beijing key laboratory of green recovery and extraction of rare and precious metals University of Science and Technology BeijingBeijing 100083China State key laboratory of Organic-Inorganic Composites Beijing University of Chemical TechnologyBeijing 100029China Department of Physics Beijing Technology and Business UniversityBeijing 100037China

Exploiting stable photocatalytic films is of practical significance for solar energy-hydrogen conversion and pollutant degradation, yet remains a big challenge so far. In this work, we report a highly stable photocatalytic film, i.e.,MoS_(2)/PtSe_(2)/FTO by sequential growing PtSe_(2) and MoS_(2) onto commercially fluorine-doped tin oxide(FTO) substrates using two round thermal evaporation and chemical vapor deposition(CVD) process.

关键词： film FTO separation

A review of lithium extraction from natural resources

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2023年第2期30卷 209-224页

作者： Yubo Liu Baozhong Ma Yingwei Lü Chengyan Wang Yongqiang Chen State key laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China beijing key laboratory of green recovery and extraction of rare and precious metals University of Science and Technology BeijingBeijing 100083China

Lithium is considered to be the most important energy metal of the 21st century.Because of the development trend of global electrification,the consumption of lithium has increased significantly over the last decade,and it is foreseeable that its demand will continue to increase for a long time.Limited by the total amount of lithium on the market,lithium extraction from natural resources is still the first choice for the rapid development of emerging industries.This paper reviews the recent technological developments in the extraction of lithium from natural resources.Existing methods are summarized by the main resources,such as spodumene,lepidolite,and brine.The advantages and disadvantages of each method are compared.Finally,reasonable suggestions are proposed for the development of lithium extraction from natural resources based on the understanding of existing methods.This review provides a reference for the research,development,optimization,and industrial application of future processes.

关键词： lithium extraction spodumene lepidolite brine