检索结果-南通市图书馆

Comprehensive evaluation of an ionic liquid based deep purification process for NH_(3)-containing industrial gas

Journal of Environmental Sciences 2024年第2期136卷 698-708页

作者： Guoxiong Zhan Fei Cao Jianjun Chen Zhen Chen Yuanmeng Duan Fei Chang Shaojuan Zeng Yinge Bai Zengxi Li Xiangping Zhang Junhua Li State Key Joint Laboratory of Environment Simulation and Pollution control School of EnvironmentTsinghua UniversityBeijing 100084China Sino-Danish College University of Chinese Academy of SciencesBeijing 100049China institute of Process engineering Chinese Academy of SciencesBeijing 100190China College of Chemical and engineering University of Chinese Academy of SciencesBeijing 100049China

Ammonia(NH_(3))emission has caused serious environment issues and aroused worldwide concern.The emerging ionic liquid(IL)provides a greener way to efficiently capture NH_(3).This paper provides rigorous process simulation,optimization and assessment for a novel NH_(3)deep purification process using IL.The process was designed and investigated by simulation and optimization using ionic liquid[C_(4)im][NTF_(2)]as absorbent.Three objective functions,total purification cost(TPC),total process CO_(2)emission(TPCOE)and thermal efficiency(ηeff)were employed to optimize the absorption process.Process simulation and optimization results indicate that at same purification standard and recovery rate,the novel process can achieve lower cost and CO_(2)emission compared to benchmark process.After process optimization,the optimal functions can achieve 0.02726$/Nm~3(TPC),311.27 kg CO_(2)/hr(TP-COE),and 52.21%(ηeff)for enhanced process.Moreover,compared with conventional process,novel process could decrease over$3 million of purification cost and 10000 tons of CO_(2)emission during the life cycle.The results provide a novel strategy and guidance for deep purification of NH_(3)capture.

关键词： NH_(3) Capture Process Ionic Liquid Process Simulation Process Optimization Deep purification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of projectile parameters on the momentum transfer and projectile melting during hypervelocity impact

引用

Defence Technology（防务技术） 2024年第2期32卷 89-103页

作者： Wenjin Liu Qingming Zhang Renrong Long Zizheng Gong Ren Jiankang Xin Hu Siyuan Ren Qiang Wu Guangming Song State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081China beijing institute of Spacecraft Environment engineering China Academy of Space TechnologyBeijing100094China

The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation results with the experimental results,the correctness of the calculation and the statistical method of momentum transfer coefficient is verified.Different shapes of aluminum,copper and heavy tungsten alloy projectiles striking aluminum,basalt,and pumice target for impacts up to 10 km/s are simulated.The influence mechanism of the shape of the projectile and projectile/target density on the momentum transfer was obtained.With an increase in projectile density and length-diameter ratio,the energy transfer time between the projectile and targets is prolonged.The projectile decelerates slowly,resulting in a larger cratering depth.The energy consumed by the projectile in the excavation stage increased,resulting in lower mass-velocity of ejecta and momentum transfer coefficient.The numerical simulation results demonstrated that for different projectile/target combinations,the higher the wave impedance of the projectile,the higher the initial phase transition velocity and the smaller the mass of phase transition.The results can provide theoretical guidance for kinetic impactor design and material selection.

关键词： Hypervelocity impact Energy partitioning Impact melting Momentum transfer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An Intelligent Framework for Resilience Recovery of FANETs with Spatio-Temporal Aggregation and Multi-Head Attention Mechanism

引用

Computers, Materials & Continua 2024年第5期79卷 2375-2398页

作者： Zhijun Guo Yun Sun YingWang Chaoqi Fu Jilong Zhong Air Traffic control and Navigation College Air Force Engineering UniversityXi’an710000China institute of Systems engineering Academy of Military ScienceBeijing100101China Equipment Management and UAV engineering College Air Force Engineering UniversityXi’an710038China Defense Innovation institute Academy of Military ScienceBeijing100071China

Due to the time-varying topology and possible disturbances in a conflict environment,it is still challenging to maintain the mission performance of flying Ad hoc networks(FANET),which limits the application of Unmanned Aerial Vehicle(UAV)swarms in harsh environments.This paper proposes an intelligent framework to quickly recover the cooperative coveragemission by aggregating the historical spatio-temporal network with the attention mechanism.The mission resilience metric is introduced in conjunction with connectivity and coverage status information to simplify the optimization model.A spatio-temporal node pooling method is proposed to ensure all node location features can be updated after destruction by capturing the temporal network structure.Combined with the corresponding Laplacian matrix as the hyperparameter,a recovery algorithm based on the multi-head attention graph network is designed to achieve rapid recovery.Simulation results showed that the proposed framework can facilitate rapid recovery of the connectivity and coverage more effectively compared to the existing studies.The results demonstrate that the average connectivity and coverage results is improved by 17.92%and 16.96%,respectively compared with the state-of-the-art model.Furthermore,by the ablation study,the contributions of each different improvement are compared.The proposed model can be used to support resilient network design for real-time mission execution.

关键词： Resilience cooperative mission FANET spatio-temporal node pooling multi-head attention graph network

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Kinematic calibration method with high measurement efficiency and robust identification for hybrid machine tools

引用

Chinese Journal of Aeronautics 2024年第3期37卷 468-482页

作者： Liping WANG Mengyu LI Guang YU Weitao LI Xiangyu KONG State Key Laboratory of Tribology Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China beijing Key Laboratory of Precision/Ultra-precision Manufacturing Equipment and control Beijing 100084China

Geometric error is the main factor affecting the machining accuracy of hybrid machine tools.Kinematic calibration is an effective way to improve the geometric accuracy of hybrid machine tools.The necessity to measure both position and orientation at each pose,as well as the instability of identification in case of incomplete measurements,severely affects the application of traditional calibration methods.In this study,a kinematic calibration method with high measurement efficiency and robust identification is proposed to improve the kinematic accuracy of a five-axis hybrid machine tool.First,the configuration is introduced,and an error model is derived.Further,by investigating the mechanism error characteristics,a measurement scheme that only requires tool centre point position error measurement and one alignment operation is proposed.Subsequently,by analysing the effects of unmeasured degrees of freedom(DOFs)on other DOFs,an improved nonlinear least squares method based on virtual measurement values is proposed to achieve stable parameter identification in case of incomplete measurement,without introducing additional parameters.Finally,the proposed calibration method is verified through simulations and experiments.The proposed method can efficiently accomplish the kinematic calibration of the hybrid machine tool.The accuracy of the hybrid machine tool is significantly improved after calibration,satisfying actual aerospace machining requirements.

关键词： Hybrid machine tool Calibration Measurement scheme Improved nonlinear least squares method Virtual measurement values

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Acute Effects of Low Temperatures and Cold Waves on Elderly Infectious Pneumonia Mortality—Jinan City,Shandong Province,China,2014-2022

引用

China CDC weekly 2024年第5期6卷 77-82,I0002-I0005页

作者： Huiyun Chang Mingjun Li Ying Wang Liangliang Cui Tiantian Li Jinan Municipal Center for Disease control and Prevention Jinan Municipal Center for Disease Control and Prevention Affiliated to Shandong UniversityJinan CityShandong ProvinceChina Chinese Filed Epidemiology Training Program Chinese Center for Disease Control and PreventionBeijingChina China CDC Key Laboratory of Environment and Population Health National Institute of Environmental HealthChinese Center for Disease Control and PreventionBeijingChina

Summary What is already known about this topic?The mortality rate due to pneumonia varies depending on the infectious agents present in a low-temperature environment.What is added by this report?This study aimed to examine the relationship between low temperatures and cold waves and the risk of mortality from infectious pneumonia in the elderly.The findings indicate a significant increase in the risk of infectious pneumonia.

关键词： environment Shandong finding

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Phase-field simulations of the effect of temperature and interface for zirconiumδ-hydrides

引用

Chinese Physics B 2024年第4期33卷 701-710页

作者：陈子航盛杰刘瑜施小明黄厚兵许可王越超武帅孙博刘海风宋海峰 School of Materials Science and engineering Beijing Institute of TechnologyBeijing 100081China Advanced Research institute of Multidisciplinary Science Beijing Institute of TechnologyBeijing 100081China Laboratory of Computational Physics Institute of Applied Physics and Computational MathematicsBeijing 100088China Department of Physics University of Science and Technology BeijingBeijing 100083China

Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides.In this study,we have developed a phasefield model based on the assumption of elastic behaviour within a specific temperature range(613 K-653 K).This model allows us to study the influence of temperature and interfacial effects on the morphology,stress,and average growth rate of zirconium hydride.The results suggest that changes in temperature and interfacial energy influence the length-to-thickness ratio and average growth rate of the hydride morphology.The ultimate determinant of hydride orientation is the loss of interfacial coherency,primarily induced by interfacial dislocation defects and quantifiable by the mismatch degree q.An escalation in interfacial coherency loss leads to a transition of hydride growth from horizontal to vertical,accompanied by the onset of redirection behaviour.Interestingly,redirection occurs at a critical mismatch level,denoted as qc,and remains unaffected by variations in temperature and interfacial energy.However,this redirection leads to an increase in the maximum stress,which may influence the direction of hydride crack propagation.This research highlights the importance of interfacial coherency and provides valuable insights into the morphology and growth kinetics of hydrides in zirconium alloys.

关键词： zirconium hydride phase-field method temperature effect mismatch degree

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Deep Reinforcement Learning or Lyapunov Analysis?A Preliminary Comparative Study on Event-Triggered Optimal control

引用

IEEE/CAA Journal of Automatica Sinica 2024年第7期11卷 1702-1704页

作者： Jingwei Lu Lefei Li Qinglai Wei Fei-Yue Wang IEEE the Department of Industrial engineering Tsinghua UniversityBeijing 100084China The State Key Laboratory for Management and control of Complex Systems Institute of AutomationChinese Academy of SciencesBeijing 100190China

Dear Editor,This letter develops a novel method to implement event-triggered optimal control(ETOC) for discrete-time nonlinear systems using parallel control and deep reinforcement learning(DRL), referred to as Deep-ETOC. The developed Deep-ETOC method introduces the communication cost into the performance index through parallel control, so that the developed method enables control systems to learn ETOC policies directly without triggering conditions.

关键词： Deep letter enable

来源：

维普期刊数据库

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Classification of knowledge graph completeness measurement techniques

引用

Journal of Systems engineering and Electronics 2024年第1期35卷 154-162页

作者： ZHANG Ying XIAO Gang institute of Systems engineering Academy of Military SciencesBeijing 100107China

At present,although knowledge graphs have been widely used in various fields such as recommendation systems,question and answer systems,and intelligent search,there are always quality problems such as knowledge omissions and errors.Quality assessment and control,as an important means to ensure the quality of knowledge,can make the applications based on knowledge graphs more complete and more accurate by reasonably assessing the knowledge graphs and fixing and improving the quality problems at the same time.Therefore,as an indispensable part of the knowledge graph construction process,the results of quality assessment and control determine the usefulness of the knowledge graph.Among them,the assessment and enhancement of completeness,as an important part of the assessment and control phase,determine whether the knowledge graph can fully reflect objective phenomena and reveal potential connections among entities.In this paper,we review specific techniques of completeness assessment and classify completeness assessment techniques in terms of closed world assumptions,open world assumptions,and partial completeness assumptions.The purpose of this paper is to further promote the development of knowledge graph quality control and to lay the foundation for subsequent research on the completeness assessment of knowledge graphs by reviewing and classifying completeness assessment techniques.

关键词： quality assessment completeness assessment closed world assumptions open world assumption partial completeness assumption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Corrosion behaviors and kinetics of nanoscale zero-valent iron in water:A review

引用

Journal of Environmental Sciences 2024年第1期135卷 391-406页

作者： Chenliu Tang Xingyu Wang Yufei Zhang Nuo Liu Xiang Hu Research Group of Water Pollution control and Water Reclamation College of Chemical EngineeringBeijing University of Chemical TechnologyBeijing 100029China Shanghai Collaborative Innovation Centre for WEEE Recycling School of Resources and Environmental EngineeringShanghai Polytechnic UniversityShanghai 201209China

Knowledge on corrosion behaviors and kinetics of nanoscale zero-valent iron(nZVI)in aquatic environment is particularly significant for understanding the reactivity,longevity and stability of nZVI,as well as providing theoretical guidance for developing a cost-effective nZVI-based technology and designing large-scale applications.Herein,this review gives a holistic overview on the corrosion behaviors and kinetics of nZVI in water.Firstly,Eh-pH diagram is introduced to predict the thermodynamics trend of iron corrosion.The morphological,structural,and compositional evolution of(modified-)nZVI under different environmental conditions,assisted with microscopic and spectroscopic evidence,is then summarized.Afterwards,common analytical methods and characterization technologies are categorized to establish time-resolved corrosion kinetics of nZVI in water.Specifically,stable models for calculating the corrosion rate constant of nZVI as well as electrochemical methods for monitoring the redox reaction are discussed,emphasizing their capabilities in studying the dynamic iron corrosion processes.Finally,in the future,more efforts are encouraged to study the corrosion behaviors of nZVI in long-term practical application and further build nanoparticles with precisely tailored properties.We expect that our work can deepen the understanding of the nZVI chemistry in aquatic environment.

关键词： Nanoscale zero-valent iron(nZVI) Corrosion behaviors Corrosion kinetics nZVI evolution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The impact of water quality on the formation of halogenated benzoquinones and the adsorption efficiency by activated carbon

引用

Journal of Environmental Sciences 2024年第1期135卷 693-702页

作者： Yongjing Wang Song Gao Xinyu Yan Songtao Wang Ruolin Zhang Yan Zhou Lianhai Ren Cheng Li State Environmental Protection Key Laboratory of Food Chain Pollution control Beijing Technology and Business UniversityBeijing 100048China institute of Scientific and Technical Information of China Beijing 100038China institute of Quality Standard and Testing Technology Beijing Academy of Agriculture and Forestry SciencesBeijing 100097China Key Laboratory of Cleaner Production and Integrated Resource Utilization of China National Light Industry Beijing Technology and Business UniversityBeijing 100048China

Halogenated benzoquinones(HBQs)could cause bladder cancer,but there were few related studies on the generation and control.In this study,the impact of different precursors,pH,bromide concentration,and algae-derived organic matters on the formation of HBQs and the removal efficiency by activated carbon were investigated.It was found that the chlorination of bisphenol A produced the most 2,6-dichloro-1,4-benzoquinone(2,6-DCBQ),reaching 14.86μg/L at 1 hr,followed by tyrosine,2-chlorophenol,P-hydroxybenzoic acid,trichlorophenol,and N-methylaniline.The production of 2,6-DCBQ increased first and then decreased from 0 to 36 hr(chlorination doses 0-20 mg/L),indicating that HBQs were unstable in water.Trihalomethanes(THMs)were detected during chlorination,and the concentration increased with prolongation of reaction time.2,6-DCBQ production decreased and 2,6-dibromo-1,4-benzoquinone(2,6-DBBQ)production increased with increment bromide concentration and the bromide promoted the formation of tribromomethane.The production of 2,6-DCBQ decreased with increase of pH,and the maximum production was 141.38μg/L at pH of 5.Microcystis aeruginosa,Chlorella algae cells,and intracellular organic matters(IOM)could be chlorinated as potential precursors for HBQs.The most amount of 2,6-DCBQ was generated from algae cells of Microcystis aeruginosa,followed by Chlorella algae cells,Microcystis aeruginosa IOM,and Chlorella IOM.This study compared the removal efficiency of HBQs by granular activated carbon(GAC)and columnar activated carbon(CAC)under different carbon doses and initial concentrations of HBQs.It was found that the removal efficiency by GAC(80.1%)was higher than that by CAC(51.8%),indicating that GAC has better control for HBQs.

关键词： HBQS DBPS Drinking water Algae derived organic matters Activated carbon

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：