检索结果-南通市图书馆

Si-C Foam Porous-Medium Combustion Power-Generation System for Low-Calorific-Value Biomass Syngas

Journal of Thermal Science 2025年第1期34卷 206-222页

作者： YANG Jianwen CHEN Wei CAO Bingwei LIU Xinhui LI Hang College of mechanical and aerospace engineering Jilin University School of mechanical and Vehicle engineering Changchun University

Syngas produced from the gasification of organic feedstocks from biomass is one of the clean and sustainable sources of *** advantages of simple access and renewability of biomass energy can meet the energy needs of temporary power *** study presents a biomass power-generation system for vehicular *** biomass and a free-piston Stirling engine generator（FPSEG） as the primary material and prime mover,respectively,biomass energy is converted into electricity by combusting the syngas to heat the *** and key parameter design for biomass gasification and thermoelectric conversion systems within a power generation system were performed.A porous medium area was constructed using Si-C foam ceramics to obtain an energy-conversion experimental *** effects of bed height,porosity,porous-region diameter,and air-intake conditions on the power-generation performance were investigated,and optimisations were performed for the thermoelectric conversion *** rate of increase during FPSEG power generation first increased and then decreased with increasing bed height,peaking at a bed height of 40 *** increasing porous-region diameter accelerated FPSEG power generation,whereas porosity changes in the porous media did not significantly affect the rate of change during FPSEG power *** increasing air intake,the rate of increase during power generation first increased and then *** maximum change rate and the highest thermoelectric conversion efficiency of the power-generation system occurred at 9.5 m3/h and 6.5 m3/h（～45.1%）air intakes,*** the thermal inertia and combustion structure of the thermoelectric conversion system significantly increased the power-generation rate of the system,with 1.8 W/s being observed at a 9.7 m3/h air intake.

关键词： biomass combined heat and power (CHP) gasification porous media combustion power generation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Comparative Evaluation and Performance Analysis of Heat Exchangers Featured with Peened Surface

引用

Journal of Thermal Science 2025年第1期34卷 50-61页

作者： DINESHBABU Chinnadurai SHIVA SANKARAN Nallasamy VENKATESH RAJA Krishnan VENKATESH Rathinavelu Department of mechanical engineering Kongunadu College of Engineering and Technology Department of mechanical engineering Selvam College of Technology Department of mechanical engineering Sona College of Technology Department of mechanical engineering Saveetha School of EngineeringSaveetha Institute of Medical and Technical Sciences (SIMATS)Saveetha University

Heat exchangers have the potential for various engineering applications,and their performance is enriched by surface *** proposed system enriches the heat exchanger's performance by adapting a peened stainless steel（SS） surface blasted with copper,grinding,sand,and *** influences peened SS surface modified with a copper blast,grinding,sandblast,and iron blast on the surface morphology of shell and tube heat exchanger surface（STHE） is analyzed via tungsten heated cathode electron gun featured scanning electron microscope and observed coarse grain *** SS surface featured STHE performance is experimentally evaluated by different flow rates（30,60,90,and 120 L/min） underwater fluid medium functioned by the temperature ranges of 25-75℃ and its results are compared with computational fluid dynamic（CFD）/heat transfer research（HTRI） analyzed *** 60 L/min flow rate was spotted as an optimum value for both shell and tube side *** STHE is operated with a 60 L/min flow rate under the different peened surfaces and evaluated its Stanton number,Nusselt number,logarithmic mean temperature difference（LMTD）,overall heat transfer coefficient,number of transfer units（NTU）,effectiveness,and exergy *** iron blasted SS peened surface was observed to have better SHTE performance like Stanton number（0.0012）,Nusselt number（2180）,reduced LMTD of 31℃,improved overall heat transfer co-efficient of 2400 W/（m2·K）,better NTU of 0.5532,good effectiveness value of 0.451 62,and hiked exergy efficiency of 10% respectively.

关键词： penned surface performance analysis shell and tube heat exchanger stainless steel

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Melting Evaluation of Phase Change Materials Impregnated into Cascaded Metal Foams with Regionalized Enhancement

引用

Journal of Thermal Science 2025年第1期34卷 223-241页

作者： WEI Xinyi ZHANG Nan ZHANG Zhaoli CAO Xiaoling YUAN Yanping School of mechanical engineering Southwest Jiaotong University

Metal foam promotes the heat transfer of phase change materials(PCMs) in the penalty of reducing the energy storage density of the composite *** this work,the effects of constant porosity(0.96,0.94,0.92,or 0.90) and pore density(PPI) of metal foam on heat transfer of composite PCMs are *** rate could be enhanced by employing with low porosity copper ***,aiming to the right bottom phase changing "dead region",a regionalized enhancement strategy of cascaded metal foams is *** dynamic melting performances of all the composite PCMs are comprehensively *** results reveal that the cascaded configuration is beneficial for *** show that the horizontal strategy enhances melting performance:a maximum of 17.98% reduction in total melting time could be reached when the rear part porosity is 90%.The energy storage density rate could be raised by 5.48%.Besides,the vertical strategy performs with a better average temperature uniformity of 0.441 and brings a lower temperature in the heated *** sum up,the regionalized enhancement of copper foam provides better performance in the phase change *** shows significant potential for solar heat storage and thermal protection.

关键词： copper metal foam heat transfer enhancement phase change materials regionalized enhancement

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Bulging Performance and Quality Control of Aluminum Alloy Tailor-welded Overlapping Sheets Based on Interface Friction

引用

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 258-264页

作者： GAO Tiejun GAO Bowen LI Weijie ZHANG Jiabin College of aerospace engineering Shenyang Aerospace UniversityShenyang 110136China Shenyang aerospace Xinguang Group Co.L td. Shenyang 110043China

In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded sheets by covering the tailor-welded sheets with better plastic properties overlapping *** the same time,the interface friction effect between the overlapping and tailor-welded sheets was utilized to control the stress magnitude and further improve the formability and quality of the tailor-welded *** this work,the bulging process of the tailor-welded overlapping sheets was taken as the research *** alloy tailor-welded overlapping sheets bulging specimens were studied by a combination of finite element analysis and experimental *** results show that the appropriate use of interface friction between tailor-welded and overlapping sheets can improve the formability of tailor-welded sheets and control the flow of weld seam to improve the forming *** increasing the interface friction coefficient on the side of tailor-welded sheets with higher strength and decreasing that on the side of tailor-welded sheets with lower strength,the deformation of the tailor-welded sheets are more uniform,the offset of the weld seam is minimal,the limit bulging height is maximal,and the forming quality is optimal.

关键词： tailor-welded sheets overlapping sheet bulging interface friction weld seam stress

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical Simulation of Radiation Transport to Improve Microalgae Cultivation in an Air-Lift Photobioreactor

引用

Journal of Thermal Science 2025年第1期34卷 62-76页

作者： ZHANG Xianbin LI Mingjia HUNG Tzuchen ZHANG Zixun Key Laboratory of Thermo-Fluid Science and engineering of Ministry of Education School of Energy and Power EngineeringXi'an Jiaotong University School of mechanical engineering Beijing Institute of Technology Department of mechanical engineering Taipei University of Technology

A comprehensive numerical model is developed to simulate the growth of microalgae under light/dark cycling *** purpose of this study is to predict the growth rate of Chlorella vulgaris cultivated in photobioreactors(PBRs) in order to improve the light conditions for microalgae and enhance the photosynthetic *** fluid dynamics(CFD) is used to simulate its internal hydrodynamic *** Lagrangian method is employed to track the movement of microalgae *** radiative transfer equation(RTE)is used to obtain light intensity *** combination of light radiation field and microalgae cell motions is used to construct the light history and they are integrated into the model of the photosynthetic units(PSU) to calculate the microalgae growth *** numerical results demonstrate that enhanced light/dark cycling frequency with ordered mixing can promote efficient microalgae *** effect of the vortex flow field generated by the baffles in an air-lift PBR is analyzed for increasing microalgae growth *** using the 1:1 baffle spacing,the biomass production of microalgae is increased by 41.8% compared to the original PBR.

关键词： light distribution particle tracking photobioreactor structure optimization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Few-shot learning for screening 2D Ga2CoS4-x supported single-atom catalysts for hydrogen production

引用

Journal of Energy Chemistry 2025年第1期100卷 665-673页

作者： Nabil Khossossi Poulumi Dey Department of mechanical engineering (ME) Delft University of Technology

Hydrogen generation and related energy applications heavily rely on the hydrogen evolution reaction（HER）,which faces challenges of slow kinetics and high *** electrocatalysts,particularly single-atom catalysts （SACs） on two-dimensional （2D） materials,are *** study presents a few-shot machine learning （ML） assisted high-throughput screening of 2D septuple-atomic-layer Ga2CoS4-xsupported SACs to predict HER catalytic ***,density functional theory （DFT）calculations showed that 2D Ga2CoS4is inactive for ***,defective Ga2CoS4-x（x=0–0.25）monolayers exhibit excellent HER activity due to surface sulfur vacancies （SVs）,with predicted overpotentials （0–60 mV） comparable to or lower than commercial Pt/C,which typically exhibits an overpotential of around 50 m V in the acidic electrolyte,when the concentration of surface SV is lower than 8.3%.SVs generate spin-polarized states near the Fermi level,making them effective HER *** demonstrate ML-accelerated HER overpotential predictions for all transition metal SACs on 2D *** DFT data from 18 SACs,an ML model with high prediction accuracy and reduced computation time was *** intrinsic descriptor linking SAC atomic properties to HER overpotential was *** study thus provides a framework for screening SACs on 2D materials,enhancing catalyst design.

关键词： Hydrogen production Electrocatalyst 2D material Density functional theory Machine learning Surface sulfur vacancy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Dynamic modeling of a three-dimensional braided composite thin plate considering braiding directions

引用

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 123-138页

作者： Chentong GAO Huiyu SUN Jianping GU W.M.HUANG College of aerospace engineering Nanjing University of Aeronautics and Astronautics School of mechanical and aerospace engineering Nanyang Technological University Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology School of Materials Science and EngineeringNanjing Institute of Technology

Currently, there are a limited number of dynamic models available for braided composite plates with large overall motions, despite the incorporation of three-dimensional(3D) braided composites into rotating blade components. In this paper, a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established. Based on Kirchhoff's plate assumptions, the displacement variables of the plate are expressed. By incorporating the braiding directions into the constitutive equation of the braided composites, the dynamic model of the plate considering braiding directions is obtained. The effects of the speeds, braiding directions, and braided angles on the responses of the plate with fixed-axis rotation and translational motion, respectively, are investigated. This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions. It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.

关键词： Constitutive equations

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Potassium ions and cyano group modified g-C3N4 for effective generation of H2O2 through two-electron oxygen reduction

引用

Science China Chemistry 2025年第1期68卷 192-200页

作者： Dongying Wang Shulan Pu Yongmin Chen Ke Lei Yujie Duan Linjiao Mao Xuhui Zeng Xi Luo Yuntao Zhang Yuqin Dong Jin Zhong Zhang Yan Sun School of mechanical engineering Chengdu University Department of Chemistry and Biochemistry University of California

Potassium ions （K+） doped graphitic carbon nitride （g-C3N4） was prepared by a thermal etching method using potassium hydroxide （KOH） as an ion *** transform infrared spectroscopy （FTIR） and X-ray photoelectron spectroscopy （XPS）results showed that the generation of the cyano group was detected while introducing K+.Under simulated sunlight irradiation,the sample with a K+doping amount of 10%showed the highest hydrogen peroxide （H2O2） generation rate of2,140.2μmol *** apparent quantum yield （AQY） at 400 nm and the solar-to-chemical conversion （SCC） are 4.35%and1.23%,respectively.K+acted as a bridge between g-C3N4layers,which enhanced charge transfer ***,the cyano group enhanced the adsorption capacity of protons （H+） and promoted the yield of *** catalyst exhibited excellent photocatalytic stability based on four-cycle *** addition,a mechanism study showed that superoxide radicals （·O2-）were the most important active species in the reaction *** production of H2O2was achieved through consecutive single-electron *** study deepens the understanding of the oxygen reduction reaction process and opens up a new venue for improving H2O2generation.

关键词： photocatalysis hydrogen peroxide oxygen reduction reaction potassium doping cyano group

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Enhanced Dairy Scum Biodiesel Blends:Unleashing the Power of Aluminium Oxide for Sustainable and Efficient Engine Performance

引用

Journal of Thermal Science 2025年第1期34卷 283-302页

作者： Veeranna MODI Prasad B.RAMPURE Sunil Kumar SHETTY Madeva NAGARAL Channa Keshava NAIK N Johar MGM Muhammad Irsyad ABDULLAH Abdullah I.AL-MANSOUR Shamshad ALAM KLE College of engineering and Technology ChikodiVisvesvaraya Technological University Nitte (Deemed to be University) NMAM Institute of Technology (NMAMIT)Department of Mechanical Engineering Aircraft Research and Design Centre HAL Department of mechanical engineering BGS College of Engineering and TechnologyBengaluruAffiliated to Visvesvaraya Technological University Management and Science University Department of Civil engineering College of EngineeringKing Saud University

This study investigates the effect of aluminium oxide nanoparticlesaddition to biodiesel blends made from dairy milk scum on performance and combustion characteristics of the diesel *** dispersion of Al2O3nanoparticles in B20 blends at different concentrations was done with the help of *** number of blends were prepared for the *** Machine learning algorithms(Random Forest（RF）and CatBoost) was used for the *** results show that in comparison to biodiesel blends without nanoparticles,the kinematic viscosity and density is higher for fuel blends with *** these Fuel blends have higher calorific *** blends exhibited reduced Brake Specific Fuel Consumption（BSFC） of2.85% than the blends without nano particles(Dairy Scum Methyl Ester Biodiesel 20%+Neat Diesel 80%（in volume）,DSMEB20),57.14% less CO,40.8% less hydrocarbon,and increased NOxemissions compared to conventional diesel,contributing to the development of environmentally friendly and renewable biofuel blends with *** B20NP30 is the optimal blend for performance and emission *** study concludes with findings on enhanced Brake Thermal Efficiency（BTE） of 26.29% in 3×10-5（in volume） Al2O3nanoparticle-blended DSME B20 and other DSME B20 fuel blends,emphasizing the importance of optimal nanoparticle *** correlation matrix shows how engine load,efficiency measures（BTE,BSFC）,and emissions（CO,CO2,NOx,Smoke） are connected in complex *** results help us understand the complicated dynamics of engine performance and emission characteristics ***'s diagram for BTE and BSFC shows that CatBoost-based BTE models perform superior to RF-based models during the training as well as testing *** results were obtained for CO and CO2emission results.

关键词： Al2O3 concentration CI engine Dairy Scum Methyl Ester Biodiesel

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A comprehensive investigation on nonlinear vibration and bending characteristics of bio-inspired helicoidal laminated composite structures

引用

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 81-100页

作者： S.SAURABH R.KIRAN D.SINGH R.VAISH V.S.CHAUHAN School of mechanical and Materials engineering Indian Institute of Technology Mandi

Bio-inspired helicoidal composite laminates, inspired by the intricate helical structures found in nature, present a promising frontier for enhancing the mechanical properties of structural designs. Hence, this study provides a comprehensive investigation into the nonlinear free vibration and nonlinear bending behavior of bio-inspired composite plates. The inverse hyperbolic shear deformation theory(IHSDT) of plates is employed to characterize the displacement field, with the incorporation of Green-Lagrange nonlinearity. The problem is modeled using the C0finite element method(FEM), and an in-house code is developed in the MATLAB environment to solve it numerically. Various helicoidal layup configurations including helicoidal recursive(HR), helicoidal exponential(HE), helicoidal semi-circular(HS), linear helicoidal(LH), and Fibonacci helicoidal(FH)with different layup sequences and quasi-isotropic configurations are studied. The model is validated, and parametric studies are conducted. These studies investigate the effects of layup configurations, side-to-thickness ratio, modulus ratios, boundary conditions, and loading conditions at different load amplitudes on the nonlinear vibration and nonlinear bending behaviors of bio-inspired composite plates. The results show that the laminate sequence exerts a substantial impact on both nonlinear natural frequencies and nonlinear bending behaviors. Moreover, this influence varies across different side-to-thickness ratios and boundary conditions of the bio-inspired composite plate.

关键词： Inverse problems

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：