检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 697-711页

作者： Baosheng Liu Jiali Wei Shaohua Zhang Yuezhong Zhang Pengpeng Wu Daqing Fang Guorui Ma School of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024China State Key Laboratory for Mechanical Behavior of Materials Xi’an Jiaotong UniversityXi’an 710049China Intelligent Equipment Research and Development center Zhuhai Institute of Advanced Technology Chinese Academy of SciencesZhuhai 519080China advanced Materials Research Institute Zhuhai Dingmei Medical Technology Co.Ltd.Zhuhai 519000China

Mg-6Zn-2X(Fe/Cu/Ni)alloys were prepared through semi-continuous casting,with the aim of identifying a degradable magnesium(Mg)alloy suitable for use in fracturing balls.A comparative analysis was conducted to assess the impacts of adding Cu and Ni,which result in finer grains and the formation of galvanic corrosion *** electronic microscopy examination revealed that precipitated phases concentrated at grain boundaries,forming a semi-continuous network structure that facilitated corrosion penetration in Mg-6Zn-2Cu and Mg-6Zn-2Ni *** corrosion was observed in Mg-6Zn-2Fe,while galvanic corrosion was identified as the primary mechanism in Mg-6Zn-2Cu and Mg-6Zn-2Ni *** the tests,the Mg-6Zn-2Ni alloy exhibited the highest corrosion rate(approximately 932.9 mm/a)due to its significant potential *** testing showed that Mg-6Zn-2Ni alloy possessed suitable ultimate compressive strength,making it a potential candidate material for degradable fracturing balls,effectively addressing the challenges of balancing strength and degradation rate in fracturing applications.

关键词： magnesium alloys microstructure micro-galvanic corrosion mechanical properties

Phase-field simulation of precipitation kinetics and creep properties of Ni-Al-Cr/Ta superalloys

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第4期67卷 1139-1150页

作者： YANG ShuaiGe ZHANG Zan ZHUO JiCheng LONG HongLi LI YongSheng National Key Laboratory of advanced Casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China

The precipitation kinetics ofγ'-Ni_(3)(Al,Ta)phase and creep properties of Ni-15Al-x Ta at.%superalloys are investigated by the crystal plasticity phase-field *** results show that the high Ta content brings a lower creep strain for the deceleration and steady creep stage,while the creep lifetime is *** large external strain intensifies the creep damage and shortens the creep life of Ni-15Al-3Ta at.%*** kinetics evolution and elements distribution are revealed in the quaternary Ni-10Al-8.5Cr-xT a(x=1.5 at.%,2.0 at.%,2.5 at.%)superalloys by the multi-component phase-field *** anti-phase boundary(APB)changes the coarsening mechanism ofγ'phase,and Ta promotes the precipitation ofγ'phase with an increasing volume fraction and particle *** composition difference betweenγ'andγphases increases with the rising of Ta content,the strong partitioning of Ta toγ'phase strengthens the partitioning of Ni and Cr toγmatrix,and Ta shows a superiority than Al in the lattice site occupation of L1_(2)-Ni_(3)(Al,X)*** an importantγ'phase forming element,the optimization of Ta content is essential for improving the mechanical properties of Ni-based superalloys.

关键词： Ni-Al-Ta alloys creep properties kinetics phase-field

Atomistic understanding of capacity loss in LiNiO_(2)for high-nickel Li-ion batteries:First-principles study

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第5期33卷 625-629页

作者：彭率陈丽娟何长春杨小宝 School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510000China center of Excellence for advanced Materials Dongguan 523808China

Combining the first-principles calculations and structural enumeration with recognition,the delithiation process of LiNiO_(2)is investigated,where various supercell shapes are considered in order to obtain the formation energy of Li_(x)NiO_(2).Meanwhile,the voltage profile is simulated and the ordered phases of lithium vacancies corresponding to concentrations of 1/4,2/5,3/7,1/2,2/3,3/4,5/6,and 6/7 are *** understand the capacity decay in the experiment during the charge/discharge cycles,deoxygenation and Li/Ni antisite defects are calculated,revealing that the chains of oxygen vacancies will be energetically *** can be inferred that in the absence of oxygen atom in high delithiate state,the diffusion of Ni atoms is facilitated and the formation of Li/Ni antisite is induced.

关键词： Li-ion battery ground state formation energy oxygen vacancy Li/Ni antisite

Precipitating thermally reinforcement phase in aluminum alloys for enhanced strength at 400℃

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & technology 2024年第5期172卷 71-82页

作者： Xiang Su Yuan Lei Yang Chen Hongjie Qu Zhixiang Qi Gong Zheng Xu Liu Henggao Xiang Guang Chen National Key Laboratory of advanced Casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China School of Aviation and Mechanical Engineering Changzhou Institute of TechnologyChangzhou 213032China

Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy ***,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening ***,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum *** enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one *** significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T *** thermostable T phase effectively strengthens the matrix by in-hibiting dislocation ***,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high *** finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.

关键词： Aluminum alloys Precipitation Thermally reinforcement phase Re-aging treatment High-temperature strength

Tailoring the austenite characteristics via dual nanoparticles to synergistically optimize the strength-ductility in cold rolled medium Mn steel

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & technology 2024年第2期169卷 158-171页

作者： Qizhe Ye Haokai Dong Qinyi Guo Yishuang Yu Lijie Qiao Yu Yan Beijing advanced Innovation center for Materials Genome Engineering Corrosion and Protection CenterInstitute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China School of Mechanical and Automotive Engineering South China University of TechnologyGuangzhou 510641China School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China School of Biomedical Engineering Shanghai Jiao Tong UniversityShanghai 200240China

In this work,we proposed a novel Cu/θdual nanoparticles strategy to tailor the austenite characteris-tics of a medium Mn steel via a tempering-annealing process to optimize the mechanical *** explored the effects of Cu-rich particles and cementite precipitated in the tempering process on the austenite reversion during the subsequent annealing *** experiments and numerical simula-tions verified that the austenite inherited from cementite had a finer size and a higher Mn enrichment compared with the austenite originating from the tempered martensite *** addition,quantitative evaluations revealed that the pinning effect exerted by the Cu-rich particles could significantly hinder theα/γinterface migration and the recrystallized grain growth,thereby further refining the final *** contributions from the effects of dual nanoprecipitates on the austenite reversion,the heterogeneous austenite grains inherited from varying nucleation sites ensured the sustained and gradual deformation-induced martensite and twinning ***,the Cu-added steels subjected to a tempering-annealing process achieved synergetic enhancement of the tensile strength from 1055 MPa to 1250 MPa and elongation from 33%to 45%.This strategy may provide new guidance for the development and alloy design of high-performance medium Mn steels.

关键词： Dual nanoparticles Medium Mn steel Tempering-annealing process Austenite reversion Mechanical properties

Phase field modeling of grain stability of nanocrystalline alloys by explicitly incorporating mismatch strain

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3370-3382页

作者： Min Zhou Hong-Hui Wu Yuan Wu Hui Wang Xiong-Jun Liu Sui-He Jiang Xiao-Bin Zhang Zhao-Ping Lu Beijing advanced Innovation center for Materials Genome Engineering State Key Laboratory for Advanced Metals and MaterialsUniversity of Science and Technology BeijingBeijing 100083Cnina Institute for Carbon Neutrality University of Science and TechnologyBeijing 100083China Institute of Materials Intelligent technology Liaoning Academy of MaterialsShenyang 110004China

Ab st ra ct Nanocrystalline materials exhibit unique properties due to their extremely high grain boundary(GB) ***,this high-density characteristic induces grain coarsening at elevated temperatures,thereby limiting the widespread application of nanocrystalline *** experimental observations revealed that GB segregation and second-phase pinning effectively hinder GB migration,thereby improving the stability of nanocry stalline *** this study,a mouified phase-field model that integrates mismatch strain,solute segregation and precipitation was developed to evaluate the influence of lattice misfit on the thermal stability of nanocrystalline *** simulation results indicated that introducing a suitable mismatch strain can effectively enhance the microstructural stability of nanocrystalline *** synergizing precipitation with an appropriate lattice misfit,the formation of second-phase particles in the bulk grains can be suppressed,thereby facilitating solute segregation/precipitation at the *** concentrated solute segregation and precipitation at the GBs effectively hinders grain migration,thereby preventing grain *** findings provide a new perspective on the design and regulation of nanocrystalline alloys with enhanced thermal stability.

关键词： Phase field model Mismatch strain Second-phase precipitation Grain boundary segregation Nanocrystalline alloys

Hole mobility enhancement in monolayer WSe2 p-type transistors through molecular doping

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 207-213页

作者： Shiyuan LIU Xiong XIONG Xin WANG Xinhang SHI Ru HUANG Yanqing WU School of Integrated Circuits and Beijing advanced Innovation center for Integrated Circuits Peking University Wuhan National High Magnetic Field center and School of Integrated Circuits Huazhong University of Science and Technology

Two-dimensional （2D） transition metal dichalcogenide （TMDC） semiconductor materials exhibit extraordinary electrical properties,holding promise for the realization of next-generation complementary metal-oxide-semiconductor （CMOS） devices at ultimate ***,constrained by effective device doping strategies,the hole mobility and device performance of tungsten diselenide （WSe2） p-type transistors,especially monolayer chemical vapor deposition （CVD）-grown WSe2,have not met *** this paper,an effective performance enhancement of monolayer WSe2p-type transistor was achieved through a molecular doping *** monolayer WSe2directly on SiO2back-gated substrates and leveraging energy band alignment design,4-nitrobenzenediazonium tetrafluoroborate （4-NBD） molecular dopant with a concentration of 10 m M was utilized to modulate the Fermi level position of monolayer WSe2for hole *** devices demonstrated a more than 98%increase in hole mobility,reaching up to 97 cm2·V-1·s-1while maintaining the current on/off ratio of *** p-type WSe2transistors with 1μm channel length exhibit a high drive current surpassing 176μA·μm-1,exceeding previous CVD-WSe2devices with similar channel *** straightforward and effective approach to improving the electrical performance of WSe2transistors paves the way for advanced logic technologies based on transition metal dichalcogenide semiconductors.

关键词： CVD-grown WSe$_2$ molecular doping 4-NBD p-type transistors hole mobility

Efficient guiding and focusing of intense laser pulse using periodic thin slits

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第4期9卷 29-39页

作者： L.Xu T.W.Huang K.Jiang C.N.Wu H.Peng P.C.hen R.Li H.B.Zhuo C.T.Zhou Shenzhen Key Laboratory of Ultraintense Laser and advanced Material technology Center for Intense Laser ApplicationTechnologyand College of Engineering PhysicsShenzhen Technology UniversityShenzhen 518118People’s Republic of China

Slits have been widely used in laser-plasma interactions as plasma optical components for generating high-harmonic light and controlling laser-driven particle ***,we propose and demonstrate that periodic thin slits can be regarded as a new breed of optical elements for efficient focusing and guiding of intense laser *** fundamental physics of intense laser interaction with thin slits is studied,and it is revealed that relativistic effects can lead to enhanced laser focusing far beyond the pure diffractive focusing *** addition,the interaction of an intense laser pulse with periodic thin slits makes it feasible to achieve multifold enhancement in both laser intensity and energy transfer efficiency compared with conventional *** results provide a novel method for manipulating ultra-intense laser pulses and should be of interest for many laser-based applications.

关键词： laser pulse intense

Perspective for OER electrocatalysts:Lattice engineering of clay-like frameworks with near-surface cluster active sites

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第1期67卷 330-334页

作者： ZHANG DanTong QIAN BinBin XUE DongFeng Multiscale Crystal Materials Research center Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Near-surface cluster active centers(NSCAC)are pivotal functional units in the catalysis of oxygen evolution reaction(OER),which exceeds the limitations imposed by the diverse coordination environments experienced in atomic and molecular active centers,thereby serving as an exceptional medium for exploring the dynamic catalytic processes of metal active sites[1,2].In the OER,the NSCAC primarily consist of the catalytic site and the first neighboring coordinating *** investigation of NSCAC surpasses the exclusive reliance on the electron state regulation mechanism at the atomic level.

关键词： cluster centers exceptional

A novel triple periodic minimal surface-like plate lattice and its data-driven optimization method for superior mechanical properties

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第2期45卷 217-238页

作者： Yanda WANG Yanping LIAN Zhidong WANG Chunpeng WANG Daining FANG State Key Laboratory for Turbulence and Complex Systems&center for Applied Physics and technology College of EngineeringPeking UniversityBeijing 100871China Institute of advanced Structure technology Beijing Institute of TechnologyBeijing 100081China

Lattice structures can be designed to achieve unique mechanical properties and have attracted increasing attention for applications in high-end industrial equipment,along with the advances in additive manufacturing(AM)*** this work,a novel design of plate lattice structures described by a parametric model is proposed to enrich the design space of plate lattice structures with high connectivity suitable for AM *** parametric model takes the basic unit of the triple periodic minimal surface(TPMS)lattice as a skeleton and adopts a set of generation parameters to determine the plate lattice structure with different topologies,which takes the advantages of both plate lattices for superior specific mechanical properties and TPMS lattices for high connectivity,and therefore is referred to as a TPMS-like plate lattice(TLPL).Furthermore,a data-driven shape optimization method is proposed to optimize the TLPL structure for maximum mechanical properties with or without the isotropic *** this method,the genetic algorithm for the optimization is utilized for global search capability,and an artificial neural network(ANN)model for individual fitness estimation is integrated for high efficiency.A set of optimized TLPLs at different relative densities are experimentally validated by the selective laser melting(SLM)fabricated *** is confirmed that the optimized TLPLs could achieve elastic isotropy and have superior stiffness over other isotropic lattice structures.

关键词： lattice structure triple periodic minimal surface(TPMS) plate lattice structural optimization machine learning