检索结果-南通市图书馆

Chinese Journal of Polymer Science 2024年第6期42卷 751-765页

作者： Jun-Hao Zhou Li-Ming Tang Key laboratory of advanced materials of Ministry of Education of China Department of Chemical EngineeringTsinghua UniversityBeijing100084China

In this study,a series of hindered urea bond(HUB)containing polyurethane-urea methacrylate prepolymers and a none HUB containing polyurethane methacrylate prepolymer were prepared using isobornyl methacrylate as the reactive diluent via one-pot *** prepolymers were characterized fully by various ***,their thermosets were fabricated via UV curing in presence of a photo initiator,and their mechanical property and thermal behavior were investigated and *** from the none HUB containing thermoset,the HUB containing thermosets(defined as PUT)could be recycled and reprocessed by hot press under relatively mild conditions with high recovery ratio of mechanical ***,zinc oxide(ZnO)nanoparticles were modified with 3-(trimethoxysilyl)propyl methacrylate and the modified ZnO(defined as ZnO-TPM)was dispersed and polymerized into PUT matrix to prepare their *** influence of ZnO-TPM on the mechanical performance of the composites was evaluated,which indicated that the Young’s modulus and tensile strength increased gradually to the maximum values at ZnO-TPM content of 1 wt%and then *** composites also displayed good reprocessability with improved recovery ratio compared to the pure PUT *** addition,the composite materials exhibited strong UV absorption capacity,implying their potential application in the circumstance where UV-shielding was required.

关键词： Polyurethane-urea methacrylate Hindered urea bond ZnO nanoparticles Reprocessing UV curing

Artificial synapses based on organic electrochemical transistors with self-healing dielectric layers

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第3期35卷 423-427页

作者： Yushan Gao Junyao Zhang Dapeng Liu Tongrui Sun Jun Wang Li Li Shilei Dai Jianhua Zhang Zhenglong Yang Jia Huang School of materials Science and Engineering Tongji UniversityShanghai 201804China Key laboratory of advanced Display and System application Ministry of EducationShanghai UniversityShanghai 200072China National Key laboratory of Autonomous Intelligent Unmanned Systems Tongji UniversityShanghai 201804China

Organic electrochemical transistors(OECTs)have emerged as one type of promising building block for neuromorphic systems owing to their capability of mimicking the morphology and functions of biological neurons and ***,numerous kinds of OECTs have been developed,while self-healing performance has been neglected in most reported *** this work,the OECTs using self-healing polymer electrolytes as dielectric layers are *** important synaptic behaviors are simulated in the OECTs by doping the channel layers with ions from the *** from the dynamic hydrogen bonds in the self-healing polymer electrolytes,the OECTs can successfully maintain their electrical performance and the ability of emulating synaptic behaviors after self-healing compared with the initial *** significantly,the sublinear spatial summation function is demonstrated in the OECTs and their potential in flexible electronics is also *** results suggest that our devices are expected to be a vital component in the development of future wearable and bioimplantable neuromorphic systems.

关键词： Organic electrochemical transistors Artificial synapses Synaptic behaviors Self-healing Flexibility

Modeling Method of C/C-ZrC Composites and Prediction of Equivalent Thermal Conductivity Tensor Based on Asymptotic Homogenization

在线全文

学校读者我要写书评

暂无评论

工程与科学中的计算机建模(英文) 2024年第1期138卷 391-410页

作者： Junpeng Lyu Hai Mei Liping Zu Lisheng Liu Liangliang Chu Department of Mechanics and Engineering Structure Wuhan University of TechnologyWuhan430070China Hubei Key laboratory of Theory and application of advanced materials Mechanics Wuhan University of TechnologyWuhan430070China

This article proposes a modeling method for C/C-ZrC composite *** to the superposition of Gaussian random field,the original gray model is obtained,and the threshold segmentation method is used to generate the C-ZrC inclusion ***,the fiber structure is added to construct the microstructure of the three-phase plain weave *** reconstructed inclusions can meet the randomness of the shape and have a uniform *** an algorithm based on asymptotic homogenization and finite element method,the equivalent thermal conductivity prediction of the microstructure finite element model was carried out,and the influence of component volume fraction on material thermal properties was *** sensitivity of model parameters was studied,including the size,mesh sensitivity,Gaussian complexity,and correlation length of the RVE model,and the optimal calculation model was *** results indicate that the volume fraction of the inclusion phase has a significant impact on the equivalent thermal conductivity of the *** the volume fraction of carbon fiber and ZrC increases,the equivalent thermal conductivity tensor gradually *** model can be used to explore the impact of materialmicrostructure on the results,and numerical simulations have studied the relationship between structure and performance,providing the possibility of designing microstructure based on performance.

关键词： 3D reconstruction randomheterogeneous media microstructure asymptotic homogenization effective properties

Wide temperature range,air stable,transparent,and self-powered photodetectors enabled by a hybrid film of graphene and singlewalled carbon nanotubes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第7期17卷 6582-6593页

作者： Ying Yue Di Zhang Pengyu Wang Xin Wu Yuejuan Zhang Yanchun Wang Xiao Zhang Xiaojun Wei Huaping Liu Weiya Zhou Beijing National laboratory for Condensed Matter Physics and Institute of PhysicsChinese Academy of SciencesBeijing 100190China School of Physical Sciences and College of materials Science and Optoelectronic Technology University of Chinese Academy of SciencesBeijing 100049China Songshan Lake materials laboratory Dongguan 523808China Beijing Key laboratory for advanced Functional materials and Structure research Beijing 100190China

Transparent photovoltaic devices(TPVDs)have attracted increasing attention in emerging electronic *** the application scenarios extend,there raise higher requirements regarding the stability and operating temperature range of *** this work,a unique preparation strategy is proposed for air stable TPVD with a wide operating temperature range,i.e.,a nanoscale architecture termed as H-TPVD is constructed that integrates a free-standing and highly transparent conductive hybrid film of graphene and single-walled carbon nanotubes(G-SWNT TCF for short)with a metal oxide NiO/TiO_(2)*** preparation approach is suitable for scaling *** to the excellent transparent conductivity of the freestanding G-SWNT hybrid film and the ultrathin NiO/TiO_(2)heterojunction(100 nm),H-TPVD selectively absorbs the ultraviolet(UV)band of sunlight and has a transparency of up to 71%in the visible *** integrated nanoscale architecture manifests the significant holecollecting capability of the G-SWNT hybrid film and the efficient carrier generation and separation within the ultrathin NiO/TiO_(2)heterojunction,resulting in excellent performance of the H-TPVD with a specific detectivity of 2.7×1010 ***,the freestanding G-SWNT TCF is a super stable and non-porous two-dimensional film that can insulate gas molecules,thereby protecting the surface properties of NiO/TiO_(2)heterojunctions and enhancing the stability of *** subjected to 20,000 cycles and storage in air for three months,the performance parameters such as photo-response signal,output power,and specific detectivity show no noticeable *** particular,the as-fabricated self-powered H-TPVD can operate over a wide temperature range from^(−1)80 to 300°C,and can carry out solar-blind UV optical communication in this *** addition,the 4×4 array H-TPVD demonstrates clear optical *** results make it possible for H-TPVD to expand its potential application scenarios.

关键词： transparent photovoltaic devices hybrid films of graphene and single-walled carbon nanotubes metal oxides stability wide temperature range

In-situ imaging electrocatalysis in a solid-state Li-O_(2) battery with CuSe nanosheets as air cathode

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第5期35卷 466-470页

作者： Peng Jia Yunna Guo Dongliang Chen Xuedong Zhang Jingming Yao Jianguo Lu Liqiang Zhang Hebei Key laboratory of Applied Chemistry College of Environmental and Chemical EngineeringYanshan UniversityQinhuangdao 066004China Clean Nano Energy Center State Key Laboratory of Metastable Materials Science and TechnologyYanshan UniversityQinhuangdao 066004China State Key laboratory of Silicon and advanced Semiconductor materials School of Materials Science and EngineeringZhejiang UniversityHangzhou 310058China Key laboratory of Low Dimensional materials and application Technology of Ministry of Education School of Materials Science and EngineeringXiangtan UniversityXiangtan 411105China

The development of highly efficient catalysts in the cathodes of rechargeable Li-O_(2) batteries is a considerable *** enhance the electrochemical performance of the Li-O_(2) battery,it is essential to choose a suitable catalyst *** selenide(CuSe)is considered as a more promising cathode catalyst material for Li-O_(2) battery due to its better conductivity and rich electrochemical active ***,its electrochemical reaction and fundamental catalytic mechanism remain unclear till ***,in-situ environmental transmission electron microscopy technique was used to study the catalysis mechanism of the CuSe nanosheets in Li-O_(2) batteries during discharge and charge *** is found that Li_(2)O was formed and decomposed around the ultrafine-grained Cu during the discharge and charge processes,respectively,demonstrating excellent *** indicate that the freshly formed ultrafine-grained Cu in the conversion reaction catalyzed the latter four-electron-transfer oxygen reduction reaction,leading to the formation of Li_(2)*** study provides important understanding of the electrochemistry of the LiO_(2) nanobatteries,which will aid the development of high-performance Li-O_(2) batteries for energy storage applications.

关键词： In-situ environmental transmission electron microscopy Lithium oxygen batteries CuSe nanosheets Oxygen reduction reaction Oxygen evolution reaction

A High-Performance MoS_(2)-Based Visible-Near-Infrared Photodetector from Gateless Photogating Effect Induced by Nickel Nanoparticles

在线全文

学校读者我要写书评

暂无评论

research 2024年第2期6卷 171-179页

作者： Ran Duan Weihong Qi Panke Li Kewei Tang Guoliang Ru Weimin Liu State Key laboratory of Solidification Processing Center of Advanced Lubrication and Seal MaterialsNorthwestern Polytechnical UniversityXi'an 710072China Shandong laboratory of Yantai advanced materials and Green Manufacturing Yantai 265503China State Key laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

Recent advancements in two-dimensional materials have shown huge potential for optoelectronic *** is challenging to achieve highly effective and sensitive broadband photodetection based on MoS_(2)*** engineering,such as introducing vacancies,can narrow the bandgap and boost the separation of photogenerated carriers by defect states but leads to a slow response ***,we propose a nickel nanoparticle-induced gateless photogating effect with a unique energy band structure to enable the application of defect engineering and achieve high optoelectronic *** device based on Ni nanoparticle-decorated MoS_(2)with S vacancies exhibited high responsivities of 106.21 and 1.38 A W^(-1)and detectivities of 1.9×10^(12)and 8.9×10^(9)Jones under 532 and 980 nm illumination(visible to near infrared),respectively,with highly accelerated response *** strategy provides new insight into optimizing defect engineering to design high-performance optoelectronic devices capable of broadband photodetection.

关键词： defect Infrared illumination

Insights into ionic association boosting water oxidation activity and dynamic stability

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第2期89卷 99-109,I0004页

作者： Zanling Huang Shuqi Zhu Yuan Duan Chaoran Pi Xuming Zhang Abebe Reda Woldu Jing-Xin Jian Paul K.Chu Qing-Xiao Tong Liangsheng Hu Xiangdong Yao Department of Chemistry and Key laboratory for Preparation and application of Ordered Structural materials of Guangdong Province Shantou UniversityShantou 515063GuangdongChina Chemistry and Chemical Engineering Guangdong laboratory Shantou 515063GuangdongChina State Key laboratory of Refractories and Metallurgy and Institute of advanced materials and Nanotechnology Wuhan University of Science and TechnologyWuhan 430081HubeiChina Department of Physics Department of Materials Science and Engineeringand Department of Biomedical EngineeringCity University of Hong KongTat Chee AvenueKowloonHong KongChina School of advanced Energy Sun Yat-sen University(Shenzhen)Shenzhen 518107GuangdongChina

There have been reports about Fe ions boosting oxygen evolution reaction(OER)activity of Ni-based catalysts in alkaline conditions,while the origin and reason for the enhancement remains ***,we attempt to identify the activity improvement and discover that Ni sites act as a host to attract Fe(Ⅲ)to form Fe(Ni)(Ⅲ)binary centres,which serve as the dynamic sites to promote OER activity and stability by cyclical formation of intermediates(Fe(Ⅲ)→Fe(Ni)(Ⅲ)→Fe(Ni)-OH→Fe(Ni)-O→Fe(Ni)OOH→Fe(Ⅲ))at the electrode/electrolyte interface to emit O_(2).Additionally,some ions(Co(Ⅱ),Ni(Ⅱ),and Cr(Ⅲ))can also be the active sites to catalyze the OER process on a variety of *** Fe(Ⅲ)-catalyzed overall water-splitting electrolyzer comprising bare Ni foam as the anode and Pt/Ni-Mo as the cathode demonstrates robust stability for 1600 h at 1000 mA cm^(-2)@~1.75 *** results provide insights into the ioncatalyzed effects boosting OER performance.

关键词： Oxygen evolution reaction Fe(Ⅲ)-catalysis Ni-Fe binary active centers Ion-catalyzed effects Robust stability

Frequency-dependent Electrical Capacitance and Resistance of Ultra-high Performance Concrete and Their Responses to Compressive Strain

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials Science) 2024年第4期39卷 968-978页

作者：吴瑜孙明清 ZHU Lutao SONG Qiulei CHEN Jianzhong Hubei Key laboratory of Theory and application of advanced materials Mechanics School of ScienceWuhan University of TechnologyWuhan 430070China School of Civil Engineering and Architecture Hubei University of Arts and ScienceXiangyang 441053China Suzhou Concrete and Cement Products research Institude Co. LtdSuzhou 215026China

The frequency-dependent electrical properties and strain self-sensing behaviour of ultra-high performance concrete(UHPC)as cement-based stress/strain self-sensing(CBSS)smart materials were investigated in the frequency range from 100 Hz to 300 *** using the electrical parameters of the equivalent electric circuit model,the quantitative relations of capacitance and conductance of CBSS with the measurement frequency were *** capacitance and the conductance exhibit power-law type dependence on the measurement *** calculated capacitance values at frequencies beyond 2 kHz and conductance values are consistent with the experimental *** sweep-frequency test and the fixed-frequency test were performed to examine effects of the excitation frequencies on strain self-sensing properties of *** fractional change in capacitance(FCC)and resistance(FCR)of CBSS are frequency-dependent in the frequency range from 100 Hz to the f_(B),but frequency-independent in the frequency range from the f_(B)to 300 *** f_(A)and the f_(B)are 1.7-4.0 kHz and 11-78 kHz depending on the fiber dosages,*** and FCR reach their maximum at the f_(A)and 100 Hz,*** responses of capacitance and resistance of CBSS to strain show good repeatability during cyclic *** the fiber dosage increases,capacitance-based sensitivity to strain increases initially and then decreases at the f_(A),and resistance-based sensitivity to strain of CBSS increases with increasing fiber contents.

关键词： UHPC strain self-sensing capacitance-based frequency-dependent

Performance improvements in complementary metal oxide semiconductor devices and circuits based on fin field-effect transistors using 3-nm ferroelectric Hf0.5Zr0.5O2

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3242-3249页

作者： Zhao-Hao Zhang Yan-Na Luo Gao-Bo Xu Jia-Xin Yao Zhen-Hua Wu Hong-Bin Zhao Qing-Zhu Zhang Hua-Xiang Yin Jun Luo Wen-Wu Wang Hai-Ling Tu Integrated Circuit advanced R&D Center Institute of Microelectronics of Chinese Academy of Sciences School of Integrated Circuits University of Chinese Academy of Sciences State Key laboratory of advanced materials for Smart Sensing General Research Institute for Nonferrous Metals

In this work,a conventional HfO2gate dielectric layer is replaced with a 3-nm ferroelectric（Fe） HZO layer in the gate stacks of advanced fin field-effect transistors（FinFETs）.Fe-induced characteristics,e.g.,negative drain induced barrier lowering（N-DIBL） and negative differential resistance（NDR）,are clearly observed for both p-and n-type HZO-based *** characteristics are attributed to the enhanced ferroelectricity of the 3-nm hafnium zirconium oxide（HZO） film,caused by Al doping from the TiAlC capping *** mechanism is verified for capacitors with structures similar to the *** to the enhanced ferroelectricity and N-DIBL phenomenon,the drain current(IDS)of the HZO-FinFETs is greater than that of HfO2-FinFETs and obtained at a lower operating ***,circuits based on HZO-FinFET achieve higher performance than those based on HfO2-FinFET at a low voltage drain(VDD),which indicates the application feasibility of the HZO-FinFETs in the ultralow power integrated circuits.

关键词： FinFET Ferroelectric Hafnium zirconium oxide Subthreshold swing Low power

Highly-chlorinated inert and robust interphase without mineralization of oxide enhancing high-rate Li metal batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第6期35卷 239-243页

作者： Long Li Kang Yang Chenpeng Xi Mengchao Li Borong Li Gui Xu Yuanbin Xiao Xiancai Cui Zhiliang Liu Lingyun Li Yan Yu Chengkai Yang Key laboratory of advanced materials Technologies International(HongKong Macao and Taiwan)Joint Laboratory on Advanced Materials TechnologiesSchool of Materials Science and EngineeringFuzhou UniversityFuzhou 350108China College of Material Sciences and Chemical Engineering Harbin Engineering UniversityHarbin 150001China

Side reactions and dendrite growth triggered by the unstable interface and inhomogeneous deposition have become the biggest obstacle to the commercialization for lithium metal *** this study,a highly-chlorinated organic-inorganic hybrid interfacial protective layer is developed by rationally tuning the interfacial passivation and robustness to achieve the convenient and efficient Li metal *** polyvinyl chloride(PVC)can effectively resist water and oxygen,which is confirmed by density functional *** organic-dominant solid electrolyte interphases(SEI)with lithium chloride are investigated by the X-ray photoelectron spectroscopy(XPS)with little mineralization of oxide,such as Li_(2)O and Li_(2)CO_(3).With such artificial SEI,a uniform and dense lithium deposition morphology are formed and an ultra-long stable cycle of over 500 h are achieved even at an ultra-high current density of 10 m A/cm^(2).Moreover,the simple and convenient protected anode also exhibits excellent battery stability when paired with the LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)and LiFePO_(4)(LFP)cathode,showing great potential for the commercial application of lithium metal batteries.

关键词： Highly-chlorinated Water/oxygen resistance Stable interphase Dendrite-free lithium metal batteries High-rate