检索结果-南通市图书馆

Economic effect of China's carbon neutrality target under shared socioeconomic pathways

Science China Earth Sciences 2025年第1期68卷 142-157页

作者： Zemiao LIU Xianjin HUANG Xinxian QI School of Geography and Ocean Science Nanjing University Key Laboratory of Carbon Neutrality and Territory Optimization Ministry of Natural Resources Frontiers Science center for Critical Earth material Cycling Nanjing University

Economic feasibility is crucial for achieving the carbon neutrality target. However, current integrated assessments often underestimate the economic impacts of mitigation policies due to the lack of consideration of their economic benefits. This study integrates a warming-labour productivity model with a typical integrated assessment model using shared socioeconomic pathways. It simulates China's economic development and carbon emission levels under both baseline and carbon-neutral policy scenarios, evaluating the economic costs and benefits of emission reduction policies aimed at achieving carbon neutrality. These findings reveal the following:(1) The economic costs of emission reduction policies are projected to peak between 2050 and 2060, ranging from 0.41% to 9.37% of total GDP in the baseline scenario, primarily due to increased energy prices and R&D investments. These costs are expected to decline rapidly after 2070.(2) China's carbon-neutral policies will mitigate global warming, with the economic benefits of mitigation projected to reach 5.65% to 17.24% of China's total GDP by 2100.(3) Lowcarbon scenarios SSP1 and SSP4 could significantly reduce initial economic costs and advance the onset of net economic gains to 2060. This integrated assessment confirms that China's carbon neutrality target offers substantial net economic benefits in the long term. To minimize initial economic costs, efforts should focus on enhancing consumption-side transitions, upgrading lowcarbon technologies, and adopting new energy sources.

关键词： Climate change China Carbon neutrality Economic effects Policy

来源：

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rise of β-furanosyl ribonucleosides as the extant RNA component facilitated by simple divalent transition-metal minerals

引用

Science China Chemistry 2025年

作者： Qianqian Chen Haoxing Xu Bingyue Zhao Yeersen Patehebieke Zerun Zhao Xiao Wang School of Chemistry and Chemical Engineering Nanjing University Frontiers Science center for Critical Earth material Cycling Nanjing University

The selective nucleoside synthesis through direct condensation between nucleobase and unactivated sugar in aqueous media has long been a formidable obstacle for the early chemical transformations hypothesized to construct the RNAWorld, due to product complexity and the low selectivity of the desired isomer. The preference of β-furanoside, the extant RNA component, has never been documented. Here we report an aqueous ribosylation mediated by divalent transition-metal ions, which unprecedentedly enhances the selectivity of furanosyl ribonucleosides as opposed to the traditionally predominating pyranosyl ones, with the furanoside/pyranoside ratio reaching up to 9/1. Furthermore, β-furanoside stands out for the first time as the most prevalent isomer in the presence of zinc and ammonium salts. The mechanism of this selectivity is elucidated with density functional theory calculations. The selectivity for β-furanoside can be further elevated via the adsorption on a zinc mineral. These findings exhibit as the first example that the selection of nucleosides with the desired, canonical configuration might be completed in the early stage of the RNA-forming process as opposed to later evolution, promoted by simple and widespread transition-metal minerals. The study may also find its value in synthetic chemistry as a guideline for developing a sustainable and selective glycosylation process.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Boosting cationic and anionic redox activity of Li-rich layered oxide cathodes via Li/Ni disordered regulation

引用

Journal of Energy Chemistry 2025年第1期100卷 533-543页

作者： Zewen Liu Zhen Wu Hao Wang Xudong Zhang Yuanzhen Chen Yongning Liu Shengwu Guo Shenghua Chen Yanli Nan Yan Liu State Key Laboratory for Mechanical Behavior of materials Xi'an Jiaotong University School of materials Science and Engineering Xi'an University of Architecture and Technology Hefei advanced Computing center Operation Management Corp Ltd Network Information center Xi'an Jiaotong University

Lithium-rich layered oxides （LLOs） are increasingly recognized as promising cathode materials for nextgeneration high-energy-density lithium-ion batteries （LIBs）.However,they suffer from voltage decay and low initial Coulombic efficiency （ICE） due to severe structural degradation caused by irreversible O ***,we introduce a three-in-one strategy of increasing Ni and Mn content,along with Li/Ni disordering and TM–O covalency regulation to boost cationic and anionic redox activity simultaneously and thus enhance the electrochemical activity of *** target material,Li1.2Ni0.168Mn0.558Co0.074O2（L1）,exhibits an improved ICE of 87.2%and specific capacity of 293.2 mA h g-1and minimal voltage decay of less than 0.53 m V cycle-1over 300 cycles at 1C,compared to Li1.2Ni0.13Mn0.54Co0.13O2（Ls）(274.4 mA h g-1for initial capacity,73.8%for ICE and voltage decay of 0.84 mV/cycle over 300 cycles at 1C).Theoretical calculations reveal that the density of states （DOS） area near the Fermi energy level for L1 is larger than that of Ls,indicating higher anionic and cationic redox reactivity than ***,L1 exhibits increased O-vacancy formation energy due to higher Li/Ni disordering of 4.76%（quantified by X-ray diffraction Rietveld refinement） and enhanced TM–O covalency,making lattice O release more difficult and thus improving electrochemical *** increased Li/Ni disordering also leads to more Ni2+presence in the Li layer,which acts as a pillar during Li+de-embedding,improving structural *** research not only presents a viable approach to designing low-Co LLOs with enhanced capacity and ICE but also contributes significantly to the fundamental understanding of structural regulation in high-performance LIB cathodes.

关键词： Ice

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Li,Na,and Cs-based metal-organic frameworks for room temperature phosphorescence applications

引用

Science China Chemistry 2025年

作者： Jiaqi Ma Rui Feng Yanyuan Jia Mingshi Zhang Shuo Guo College of Chemistry and Chemical Engineering Inner Mongolia University School of materials Science and Engineering Smart Sensing Interdisciplinary Science Center Nankai University & TKL of Metal and Molecule Based Material Chemistry Key Laboratory of advanced Energy materials Chemistry (Ministry of Education) Nankai University Department of Chemistry and Biochemistry University of California San Diego

The conventional design of metal-organic frameworks (MOFs) with room-temperature phosphorescence (RTP) mostly relies on using heavy metals,as the heavy atom effect can effectively increase the efficiency of intersystem crossing (ISC) to get a better phosphorescence *** the first time,we reported the highly efficient RTP of a lithium-based MOF IMU-101 with a lifetime (τ) of 299 ms and a quantum yield (QY) of 4.91%.In addition,MOFs IMU-102 and IMU-103,with sodium and cesium as metal nodes,were successfully *** phosphorescence properties of this series of alkali metal MOFs were systematically studied and *** crystallography and computational calculation show that the mechanism for achieving RTP for this material lies in the ultrashort coordination bond of Li,which enables the reduction of non-radiative ***-101,as a cheap and environmentally friendly room-temperature phosphorescent material,has been further developed into composite polymer inks and bulk *** makes them promising for applications in anti-counterfeiting and information encryption.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Gradient maturation experiment on hairs implies taphonomic changes in fossil hairs

引用

Science China Earth Sciences 2025年第1期68卷 62-73页

作者： Xin LI Yibo ZHOU Tao ZHAO Xingjian HE Yanhong PAN State Key Laboratory for Mineral Deposits Research Center for Critical Earth Material Cycling Centre for Research and Education on Biological Evolution and Environment and Frontiers Science School of Earth Sciences and Engineering Nanjing University Institute of Palaeontology Yunnan Key Laboratory of Earth System Science Yunnan Key Laboratory for PalaeobiologyYunnan University

Mammalian hair, as a key feature related to endothermy, physical protection, and camouflage, has a long geohistorical record that dates back even to the Mesozoic. However, the limited information on the taphonomy of hair hinders the understanding of its evolutionary significance in deep time. To address this, we conducted taphonomic experiments to simulate the transformation process of black hair. The changes in the morphological structure, microscopic characteristics, and chemical composition of hair during the simulated fossilization process were documented by scanning electron microscopy, Fourier transform infrared(FTIR) spectroscopy, and Raman spectroscopy. Our results revealed that damage to the morphology of hair began at a mild temperature(150–175°C), and hair transformed into a fluid-like mass at a relatively high temperature(200°C). In addition, the morphological structure of melanosomes had relatively greater preservation potential than keratins did, and the microscopic features of melanosomes were persistently stable. The Raman and FTIR spectra indicated that the characteristic melanin and keratin peaks changed as the temperature increased. Although the chemical signals were not lost completely, the variations in the characteristic amide bands in the FTIR spectra indicate that the keratins severely degraded at high temperatures(>200°C), whereas the characteristic melanin bands in the Raman spectra suggested that melanin signals were still recognizable, even at high temperatures(>200°C). These results were confirmed by principal component analysis(PCA) and principal component analysis linear discriminant analysis(PCA–LDA). In addition, the Raman signals of all the samples in the simulated experiments were distinguished from the signals of common geological carbonaceous materials(humic acid), which suggested that Raman spectroscopy can be used to detect melanin in fossils.

关键词： Mammalian hair Melanin Keratin Fossilization Experimental taphonomy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Design of multifunctional interfaces on ceramic solid electrolytes for high-performance lithium-air batteries

引用

Green Energy & Environment 2025年第1期10卷 183-192页

作者： Yunxin Shi Ziyang Guo Changhong Wang Mingze Gao Xiaoting Lin Hui Duan Yonggang Wang Xueliang Sun College of Energy material and Chemistry College of Chemistry and Chemical EngineeringInner Mongolia UniversityHohhot010021China Department of Mechanical and materials Engineering Western UniversityLondonONN6A 5B9Canada Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative materials Institute of New EnergyiChEM(Collaborative Innovation Center of Chemistry for Energy Materials)Fudan UniversityShanghai200433China Eastern Institute for advanced Study Eastern Institute of TechnologyNingboZhejiang315100China

High-energy-density lithium(Li)–air cells have been considered a promising energy-storage system,but the liquid electrolyte-related safety and side-reaction problems seriously hinder their *** address these above issues,solid-state Li–air batteries have been widely ***,many commonly-used solid electrolytes generally face huge interface impedance inLi–air cells and also showpoor stability towards ambient air/Li ***,we fabricate a differentiating surface-regulated ceramic-based composite electrolyte(DSCCE)by constructing disparately LiI-containing polymethyl methacrylate(PMMA)coating and Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)layer on both sides of Li_(1.5)Al_(0.5)Ge_(1.5)(PO_(4))_(3)(LAGP).The cathode-friendly LiI/PMMA layer displays excellent stability towards superoxide intermediates and also greatly reduces the decomposition voltage of discharge products in Li–air ***,the anode-friendly PVDF-HFP coating shows low-resistance properties towards ***,Li dendrite/passivation derived from liquid electrolyte-induced side reactions and air/I-attacking can be obviously suppressed by the uniformand compact composite *** a result,the DSCCE-based Li–air batteries possess high capacity/low voltage polarization(11,836mAh g^(-1)/1.45Vunder 500mAg^(-1)),good rate performance(capacity ratio under 1000mAg^(-1)/250mAg^(-1) is 68.2%)and longterm stable cell operation(~300 cycles at 750 mA g^(-1) with 750 mAh g^(-1))in ambient air.

关键词： Li-air batteries Li_(1.5)Al_(0.5)Ge_(1.5)(PO_(4))_(3) Polymers Composite electrolyte Ambient air

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bioinspired Ultrasensitive Flexible Strain Sensors for Real‑Time Wireless Detection of Liquid Leakage

引用

Nano-Micro Letters 2025年第3期17卷 310-327页

作者： Weilong Zhou Yu Du Yingying Chen Congyuan Zhang Xiaowei Ning Heng Xie Ting Wu Jinlian Hu Jinping Qu Key Laboratory of material Chemistry for Energy Conversion and Storage Ministry of EducationHubei Key Laboratory of Material Chemistry and Service Failure and Hubei Engineering Research Center for Biomaterials and Medical Protective MaterialsSchool of Chemistry and Chemical EngineeringHuazhong University of Science and TechnologyWuhan 430074People’s Republic of China School of materials Science and Engineering Wuhan Institute of TechnologyWuhan 430205People’s Republic of China Department of Biomedical Engineering City University of Hong KongHong KongSAR 999077People’s Republic of China

Liquid leakage of pipeline networks not only results in considerableresource wastage but also leads to environmental pollution and ecological *** response to this global issue, a bioinspired superhydrophobic thermoplastic polyurethane/carbon nanotubes/graphene nanosheets flexible strain sensor (TCGS) hasbeen developed using a combination of micro-extrusion compression molding andsurface modification for real-time wireless detection of liquid leakage. The TCGSutilizes the synergistic effects of Archimedean spiral crack arrays and micropores,which are inspired by the remarkable sensory capabilities of scorpions. This designachieves a sensitivity of 218.13 at a strain of 2%, which is an increase of 4300%. Additionally, it demonstrates exceptional durability bywithstanding over 5000 usage cycles. The robust superhydrophobicity of the TCGS significantly enhances sensitivity and stability indetecting small-scale liquid leakage, enabling precise monitoring of liquid leakage across a wide range of sizes, velocities, and compositionswhile issuing prompt alerts. This provides critical early warnings for both industrial pipelines and potential liquid leakage scenariosin everyday life. The development and utilization of bioinspired ultrasensitive flexible strain sensors offer an innovative and effectivesolution for the early wireless detection of liquid leakage.

关键词： Thermoplastic polyurethane Bioinspired Cracks Liquid leakage Flexible strain sensor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 20-38页

作者： Qinjin Dai Xuefeng Liu Xin Ma Shaojie Tian Qinghe Cui Beijing advanced Innovation center for materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic materials and Processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China Laboratory for advanced materials Processing of Ministry of Education University of Science and Technology BeijingBeijing 100083China School of Mechanical and Electrical Engineering Xinjiang Institute of EngineeringUrumqi 830023China

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine *** analysis has been used to characterize the shapes of metal materials at various scales and *** methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and ***,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal *** the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear *** relationship between the fractal dimensions and properties of metal material surfaces and interfaces is *** from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be *** is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

关键词： metal material surfaces and interfaces fractal analysis fractal dimension homogeneity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 154-168页

作者： Fei Weng Guijun Bi Youxiang Chew Shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng Key Laboratory for Liquid-Solid Structural Evolution and Processing of materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China Institute of Intelligent Manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore Institute of Manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical properties and microstructures of Mg-6Si alloys fabricated using the tungsten-inert-gas arc additive manufacturing

引用

China Foundry 2025年

作者： Peng-cheng Zhou Guo-qiang You Jin-yu Feng Lei Wang Xiao Lin Bin Jiang College of materials Science and Engineering Chongqing University National Engineering Research center for Magnesium Alloys Chongqing University National Key Laboratory of advanced Casting Technologies Chongqing University

Si-containing Mg alloys solidified at conventional rates often contain coarse and sharp Mg2Si phases,which can result in inferior material *** this study,Mg-6wt.%Si （Mg-6Si） alloy was prepared by wire arc additive manufacturing （WAAM）,employing the gas tungsten arc welding technique with rapid *** microstructures and mechanical properties of the WAAM alloy were investigated and compared with those of the as-cast samples produced using a metal *** results indicate that the WAAM Mg-6Si is harder and stronger than the as-cast *** microhardness of the WAAM Mg-6Si increases by 36.6%in comparison to that of as-cast Mg-6Si ***,the average tensile strengths at room temperature and 150°C increases by 63.4%and 21.3%,*** refines both the Mg2Si phase and the overall grains,resulting in a homogeneous morphology and improved mechanical *** granular Mg2Si phase,characterized by fine particles with a diffused distribution,shows a significant increase in *** acicular Mg2Si phase is distributed along the grain boundaries,and its concentration significantly *** average grain size of the Mg2Si phase is about 9.20μm,about 5 times *** refinement and distribution of the granular Mg2Si phase,as well as the reduction in the amount of needle-like Mg2Si particles,are the key factors for improving the mechanical properties of WAAM Mg-6Si alloy.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：