检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2025年第3期32卷 689-698页

作者： Kai Xu Qingqing Gao Shaoqi Shi Pei Liu Yinxu Ni Zhilei Hao Gaojie Xu Yan Fu Fenghua Liu School of Materials Science and Chemical Engineering Ningbo UniversityNingbo 315211China Zhejiang Key Laboratory of additive manufacturing Materials Ningbo Institute of Materials Technology&EngineeringChinese Academy of SciencesNingbo 315201China Northwest Yongxin Coatings Limited Company Lanzhou 730046China

Exploring high-efficiency and broadband microwave absorption(MA)materials with corrosion resistance and low cost is ur-gently needed for wide practical ***,the natural porous attapulgite(ATP)nanorods embedded with TiO_(2)and polyaniline(PANI)nanoparticles are synthesized via heterogeneous precipitation and in-situ *** obtained PANI-TiO_(2)-ATP one-di-mensional(1D)nanostructures can intertwine into three-dimensional(3D)conductive network,which favors energy *** min-imum reflection loss(RL_(min))of the PANI-TiO_(2)-ATP coating(20wt%)reaches-49.36 dB at 9.53 GHz,and the effective absorption band-width(EAB)can reach 6.53 GHz with a thickness of 2.1 *** excellent MA properties are attributed to interfacial polarization,mul-tiple loss mechanisms,and good impedance matching induced by the synergistic effect of PANI-TiO_(2)nanoparticle shells and ATP *** addition,salt spray and Tafel polarization curve tests reveal that the PANI-TiO_(2)-ATP coating shows outstanding corrosion resist-ance *** study provides a low-cost and high-efficiency strategy for constructing 1D nanonetwork composites for MA and corrosion resistance applications using natural porous ATP nanorods as carriers.

关键词： microwave absorption corrosion resistance attapulgite TiO_(2) polyaniline

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 154-168页

作者： Fei Weng Guijun Bi Youxiang Chew Shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China institute of Intelligent manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore institute of manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

Combined anisotropic and cyclic constitutive model for laser powder bed fusion fabricated aluminum alloy

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2025年第1期38卷 165-184页

作者： Fei-Fan LI Jihong ZHU Weihong ZHANG Shifeng WEN Jingwen SONG Jun MA Gang FANG State IJR Center of Aerospace Design and additive manufacturing School of Mechanical EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Research&Development institute of Northwestern Polytechnical University in Shenzhen Shenzhen 518063China School of Materials Science and Engineering Northwestern Polytechnical UniversityXi'an 710072China Department of Mechanical and Industrial Engineering Norwegian University of Science and TechnologyTrondheim 7491Norway State Key Laboratory of Tribology in Advanced Equipment Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China

This study presents new methods to effectively model the anisotropic yielding and hardening behavior of laser powder bed fusion fabricated aluminum alloy under both monotonic and cyclic loading *** proposed model combines the yield surface-interpolation method to accurately describe the anisotropic hardening rates in various directions,with the Chaboche kinematic hardening rule to precisely reflect the cyclic *** numerical implementation of the combined anisotropic and cyclic constitutive model,a fully implicit stress integration algorithm based on return mapping method is ***,the multiple parameters associated with the model are categorized and identified in an uncoupled *** isotropic and cyclic hardening parameters are determined by an inverse method,and the stability of the optimization outcomes is validated by applying different starting points for the ***,the back-stress effect on the identification of anisotropic parameters associated with the stress invariant-based Hill48 yield function is considered for the first *** consideration leads to an improved prediction accuracy compared to the identification of anisotropic parameters without considering back-stress *** combined anisotropic and cyclic constitutive model,along with the calibrated parameters,are proven capable of accurately reproducing the intricate deformation behavior of laser powder bed fusion fabricated AlSi10Mg.

关键词： Constitutive models Anisotropy Kinematic hardening Laser powder bed fusion Aluminum alloys

Broadband low-frequency sound absorption of multifunctional composite metastructure

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2025年第2期68卷 114-124页

作者： Yilong YANG Shanshan LIU Yan LI Tong GAO Yongdong PAN Yong LI Yabin JIN School of Aerospace Engineering and Applied Mechanics Tongji UniversityShanghai 200092China State International Joint Research Center of Aerospace Design and additive manufacturing Northwestern Polytechnical UniversityXi’an 710072China institute of Acoustics School of Physics Science and EngineeringTongji UniversityShanghai 200092China Shanghai Key Laboratory of Intelligent Sensing and Detection Technology School of Mechanical and Power EngineeringEast China University of Science and TechnologyShanghai 200237China Shanghai institute of Aircraft Mechanics and Control Shanghai 200092China

In this study,we fabricated multifunctional metastructures from carbon fiber-reinforced plastic composites using additive manufacturing *** metastructures are characterized by their lightweight,load-bearing capacity,and broadband low-frequency sound absorption *** metastructure consists of 36 unit cells,and non-local coupling mechanism was considered for designing the sound absorption *** developed an acoustic impedance theory tailored for the metastructure,facilitating an analysis of thermal and viscous dissipation *** is proven theoretically and experimentally that the proposed composite metastructure can achieve a noise reduction with an average sound absorption coefficient greater than 0.9 across frequencies in the rage of 330-1500 *** also studied the metastructure’s quasi-static and cyclic compression performance,confirming its efficient absorption capabilities after cyclic *** proposed design and additive manufacturing method for composite metastructures provides a novel pathway for creating lightweight,multifunctional structures with diverse applications,such as aerospace engineering.

关键词： composite metastructure broadband sound absorption additive manufacturing

同方期刊数据库

Reduced graphene oxide-mediated electron-hole separation using titanium dioxide increases the photocatalytic antibacterial activity of bone scaffolds

在线全文

学校读者我要写书评

暂无评论

Bio-Design and manufacturing 2025年第1期8卷 100-115,I0044页

作者： Pei Feng Haifeng Tian Feng Yang Shuping Peng Hao Pan Cijun Shuai State Key Laboratory of Precision manufacturing for Extreme Service Performance College of Mechanical and Electrical EngineeringCentral South UniversityChangsha 410083China NHC Key Laboratory of Carcinogenesis of Hunan Cancer Hospital and the Affiliated Cancer Hospital of Xiangya School of Medicine Cancer Research InstituteSchool of Basic Medical ScienceCentral South UniversityChangsha 410013China RESEARCH ARTICLE The Key Laboratory of Carcinogenesis and Cancer Invasion of the Chinese Ministry of Education of Xiangya Hospital and School of Basic Medical Science Central South UniversityChangsha 410013China Department of Periodontics&Oral Mucosal Section Xiangya Stomatological Hospital&Xiangya School of StomatologyCentral South UniversityChangsha 410013China institute of additive manufacturing Jiangxi University of Science and TechnologyNanchang 330013China College of Mechanical Engineering Xinjiang UniversityUrumqi 830017China

Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect *** this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser *** results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in *** experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus ***,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.

关键词： Reduced graphene oxide Photocatalysis Reactive oxygen species Antibacterial properties Bone scaffold

Thermal effects on wear behavior of additively manufactured NiTi shape memory alloys

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2025年第1期38卷 147-164页

作者： Xianghui HUANG Nan KANG Pei WANG Mohamed EL MANSORI Arts et Metiers institute of Technology MSMPHESAM UniversitéChâlons-en-Champagne 51006France Henan Key Laboratory of High-Performance Carbon Fiber Reinforced Composites Institute of Carbon Matrix CompositesHenan Academy of SciencesZhengzhou 450046China Texas A&M Engineering Experiment Station Institute for Manufacturing SystemsCollege StationTX 77843USA

NiTi alloys fabricated by laser powder bed fusion(LPBF)additive manufacturing technology not only address the compositional instability resulting from complex processes but also solve the challenges of difficult machining of intricate aerospace ***,there are very few reports on the wear behavior of LPBF-NiTi *** the present work,the effects of microstructure and thermal treatment,including heat treatment and frictional heat,on the wear behavior of LPBF-NiTi alloy and 100Cr6 ball were analyzed through a series of tribological experiments with different sliding *** the average sliding speed increases(0.079–0.216 m/s),the wear rate of the as-built and heat-treated samples tends to decrease in the range of 2.69×10^(-3)–0.97×10^(-3)mm^(3)/*** the heat-treated LPBF-NiTi alloy is 46%harder than the as-built alloy is,the latter has a higher toughness(505 MJ/m^(3))and greater transformation strain of SIM(0.097).This leads to a coupling effect of heat treatment and sliding speed on the wear *** addition,the wear track morphologies under different sliding speeds are asymmetric due to the 24% greater acceleration at the far end from the motor and the 2.15 mm deviation between the maximum speed position and the geometric center of the *** wear modes of the as-built and heat-treated samples included adhesive,abrasive and delamination ***,the wear morphologies and dominant wear modes change with the frictionally caused heat release induced by the sliding speed.

关键词： additive manufacturing Laser powder bed fusion NiTi alloys Wear resistance Sliding speed

Recent progress in flexible sensors based on 2D materials

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Semiconductors 2025年第1期46卷 130-142页

作者： Xiang Li Guancheng Wu Caofeng Pan Rongrong Bao School of Physics Beihang UniversityBeijing 100191China institute of Atomic manufacturing Beihang UniversityBeijing 100191China Beijing institute of Nanoenergy and Nanosystems Chinese Academy of SciencesBeijing 101400China School of Nanoscience and Engineering University of Chinese Academy of SciencesBeijing 100049China

With the rapid development of the internet of things(IoT)and wearable electronics,the role of flexible sensors is becoming increasingly irreplaceable,due to their ability to process and convert information ***-dimensional(2D)materials have been widely welcomed by researchers as sensitive layers,which broadens the range and application of flexible sensors due to the advantages of their large specific surface area,tunable energy bands,controllable thickness at the atomic level,stable mechanical properties,and excellent optoelectronic *** review focuses on five different types of 2D materials for monitoring pressure,humidity,sound,gas,and so on,to realize the recognition and conversion of human body and environmental ***,the main problems and possible solutions of flexible sensors based on 2D materials as sensitive layers are summarized.

关键词： 2D materials flexible sensors layered structure solution method

Physics-informed battery degradation prediction:Forecasting charging curves using one-cycle data

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第2期101卷 825-836页

作者： Aihua Tang Yuchen Xu Jinpeng Tian Xing Shu Quanqing Yu Key Laboratory of Advanced manufacturing Technology for Automobile Parts Ministry of Education Chongqing University of Technology Department of Electrical and Electronic Engineering and Research Centre for Grid Modernization The Hong Kong Polytechnic University School of Automotive Engineering Harbin Institute of Technology

Accurately predicting battery degradation is crucial for battery system ***,due to the complexities of aging mechanisms and limitations of historical data,comprehensively indicating battery degradation solely through maximum capacity loss assessment is *** machine learning offers promising solutions,it often overlooks domain knowledge,resulting in reduced accu racy,increased computational burden and decreased ***,this study proposes a method to predict the voltage-capacity（V-Q） curve during battery degradation with limited historical *** process is achieved through two physically interpretable components:a lightweight interpretable physical model and a physics-informed neural *** components incorporate domain knowledge into machine learning to improve V-Q curve prediction performance and enhance *** validation was conducted on 52 batteries of different types under different testing *** proposed method can accurately predict future *** for hundreds of cycles using only one-present-cycle V-Q curve,with root mean square error and mean absolute error basically less than 0.035 Ah and R2basically less than 98.5%.This means that incremental capacity curves can be extracted from the predicted results for a more comprehensive and accurate battery degradation ***,the method can flexibly adjust prediction length and density to cater to the practical needs of long-cycle prediction and data *** study provides a viable method for rapid degradation prediction and is expected to be generalized to in-vehicle implementations.

关键词： Degradation prediction Lightweight interpretable physical model Lithium-ion battery Physics-informed neural network Voltage-capacity curve

ICA-Net: improving class activation for weakly supervised semantic segmentation via joint contrastive and simulation learning

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Optoelectronics Letters 2025年第3期21卷 188-192页

作者： YE Zhuang LIU Ruyu SUN Bo School of Information Engineering Chengdu Aviation Vocational and Technical College School of Computer Science and Engineering Hangzhou Normal University Quanzhou institute of Equipment manufacturing Haixi Institutes Chinese Academy of Sciences

In the field of optoelectronics, certain types of data may be difficult to accurately annotate, such as high-resolution optoelectronic imaging or imaging in certain special spectral ranges. Weakly supervised learning can provide a more reliable approach in these situations. Current popular approaches mainly adopt the classification-based class activation maps (CAM) as initial pseudo labels to solve the task.

关键词： A

additive manufacturing of thin electrolyte layers via inkjet printing of highly-stable ceramic inks

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2021年第2期10卷 279-290页

作者： Zhongqi Zhu Zhiyuan Gong Piao Qu Ziyong Li Sefiu Abolaji Rasaki Zhiyuan Liu Pei Wang Changyong Liu Changshi Lao Zhangwei Chen additive manufacturing institute Shenzhen UniversityShenzhen518060China

Inkjet printing is a promising alternative for the fabrication of thin film components for solid oxide fuel cells(SOFCs) due to its contactless, mask free, and controllable printing process. In order to obtain satisfying electrolyte thin layer structures in anode-supported SOFCs, the preparation of suitable electrolyte ceramic inks is a key. At present, such a kind of 8 mol% Y_(2)O_(3)-stabilized ZrO_(2)(8 YSZ) electrolyte ceramic ink with long-term stability and high solid loading(> 15 wt%) seems rare for precise inkjet printing, and a number of characterization and performance aspects of the inks, such as homogeneity, viscosity, and printability, should be studied. In this study, 8 YSZ ceramic inks of varied compositions were developed for inkjet printing of SOFC ceramic electrolyte layers. The dispersing effect of two types of dispersants, i.e., polyacrylic acid ammonium(PAANH4) and polyacrylic acid(PAA), were compared. The results show that ultrasonic dispersion treatment can help effectively disperse the ceramic particles in the inks. PAANH4 has a better dispersion effect for the inks developed in this study. The inks show excellent printable performance in the actual printing process. The stability of the ink can be maintained for a storage period of over 30 days with the help of initial ultrasonic dispersion. Finally, micron-size thin 8 YSZ electrolyte films were successfully fabricated through inkjet printing and sintering, based on the as-developed high solid loading 8 YSZ inks(20 wt%). The films show fully dense and intact structural morphology and smooth interfacial bonding, offering an improved structural quality of electrolyte for enhanced SOFC performance.

关键词： inkjet printing water-based ceramic ink solid oxide fuel cell(SOFC)electrolyte 8YSZ ink stability rheological properties