检索结果-南通市图书馆

Chinese Journal of Aeronautics 2021年第11期34卷 66-78页

作者： Zakaria MANSOURI Riyadh BELAMADI abylsen science&technology rhone alpes Grenoble 38000France Ecole Superieure de Technologies Industrielles(ESTI) Annaba 23000Algeria

In modern gas turbines,the High Pressure Turbine(HPT)is exposed to an extreme thermal environment due to the burned gases leaving the *** burned gases are characterized by flow and temperature distortions that effect the aerodynamics and heat transfer of the *** purpose of this paper is to investigate numerically the effect of the intensity of the swirling flow combined with the temperature non-uniformity‘‘Hot-Streak"(H-S)on the aerothermal performances of a HPT Nozzle Guide Vane(NGV).The investigations are conducted on the solid untwisted NGV annular cascade developed in NASA Lewis Research *** swirl intensities(|S_(n)|=0,0.1,0.25 and 0.5),two swirl orientations(positive and negative)and two hot-streaks(rounded and radial)at the NGV inlet are *** simulations are done by solving the Reynolds Averaged Navier-Stokes(RANS)equations using ANSYS-CFX *** results show that the H-S with swirl undergoes twisting following the orientation of the *** H-S twist is aggressive under positive swirl compared to the negative swirl *** inlet swirl generates a new secondary flow structure,so called Swirl Vortex(SV),which induces more aerodynamic *** aerodynamic efficiency under negative swirl found to be higher than that under positive *** maximum temperature on the vane surface is controlled by the radial transport of the SV towards the endwalls.

关键词： Aerodynamics Heat transfer Hot-Streak HP turbine NGV Swirl intensity

Microfibrillated Cellulose Based Ink for Eco-Sustainable Screen Printed Flexible Electrodes in Lithium Ion Batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Materials science & technology 2016年第6期32卷 566-572页

作者： Oussama El Baradai Davide Beneventi Fannie Alloin Roberta Bongiovanni Nadege Bruas-Reverdy Yann Bultel Didier Chaussy Univ.Grenoble AIpes LGP2F-38000 GrenobleFrance CNRS LGP2F-38000 GrenobleFrance Univ.Grenoble alpes LEPMIF-38000 GrenobleFrance CNRS LEPMIF-38000 Grenoble.France Department of Applied science and technology DISAT.Politecnico di Torino.Corso Duca degli Abruzzi 24 10129 TorinoItaly

Free organic solvent ink containing graphite, carboxymethyl cellulose and microfibrillated cellulose as active material, dispersing and binder, respectively, has been formulated to produce flexible and eco- sustainable electrodes for lithium ion batteries. Content ratio of components and dispersion protocol were tailored in order to have theological properties suitable for a large and cheap manufacturing process as well as screen printing. The bio-sourced printed electrodes exhibit a high porosity value of 70% that limits the electrochemical performances. However, the calendering process enhances electrode performances by increasing the reversible capacity from 85 until 315 mAh/g and reducing porosity to an optimal value of 34%. Moreover the introduction of 2% w/w of monofluoro-ethylene carbonate in the electrolyte reduced their reversible capacity loss of 11% in the printed electrode.

关键词： Lithium ion batteries Flexible electrode Graphite Screen printing Cellulose Organic free solvent

What We Measure Matters:The Case of the Missing Development Data in Sendai Framework for Disaster Risk Reduction Monitoring

在线全文

学校读者我要写书评

暂无评论

International Journal of Disaster Risk science 2021年第6期12卷 779-789页

作者： Ksenia Chmutina Jason von Meding Vicente Sandoval Michael Boyland Giuseppe Forino Wesley Cheek Darien Alexander Williams Claudia Gonzalez-Muzzio Isabella Tomassi Holmes Páez Victor Marchezini School of Architecture.Building and Civil Engineering.Loughborough University Loughborough LEU 3TU.UK Florida Institute of Built Environment Resilience.University of Florida Gainesville.FL 32661USA Disaster Research Unit(DRU) Freie Universitiit Berlin12165 Berlin.Germany Stockholm Environment Institute Asia.Bangkok 10330.Thailand School of Geography University of NottinghamNottingham NG72RD.UK Institute of Disaster Mitigation for Urban Cultural Heritage Ritsumeikan University.Kyoto 603-8341Japan Department of Urban Studies and Planning Massachusetts Institute of Technology(MIT)CambridgeMA 02142USA Amhito Consultores Limitada.3565202 Santiago Chile Laboratoire Triangle Lyon.Ecole Normale Superieure de Lyon 69342 Rhone-AlpesFrance Department of Civil Engineering.Pontificia Universidad Javeriana 110231 BogotaColombia National Centre for Monitoring and Warning of Natural Disasters(CEMADEN).Sao Jose dos Campos SP 12247016Brazil

The Sendai Framework for Disaster Risk Reduction 2015−2030’s(SFDRR)framing moved away from disaster risk as a natural phenomenon to the examination of the inequality and injustice at the root of human vulnerability to hazards and ***,its achievements have not seriously challenged the long-established capitalist systems of oppression that hinder the development leading to disaster risk *** article is an exploratory mapping exercise of and a collective reflection on Sustainable Development Goals(SDGs)and SFDRR indicators-and their use in measuring progress towards disaster risk reduction(DRR).We highlight that despite the rhetoric of vulnerability,the measurement of progress towards DRR remains event/*** argue that the measurement of disaster risk could be greatly enhanced by the integration of development data in future iterations of global DRR frameworks for action.

关键词： Development dynamics Disaster risk root causes Sendai framework for disaster risk reduction Sustainable development goals

Enhancement of anaerobic biodegradability of flower stem wastes with vegetable wastes by co-hydrolysis

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental sciences 2008年第3期20卷 297-303页

作者： ZHANG Bo HE Pinjing Lü Fan SHAO Liming State Key Laboratory of Pollution Control and Resources Reuse Key Laboratory of Yangtze River Water Environment College of Environmental Science and Engineering Tongfi University Shanghai 200092 China

The vegetable wastes and flower stems were co-digested to evaluate the anaerobic hydrolysis performance of difficultly biodegradable organic wastes by introducing readily biodegradable organic wastes. The experiments were carried out in batches. When the vegetable wastes were mixed with the flower stems at the dry weight ratio of 1 to 13, the overall hydrolysis rate increased by 8%, 12%, and 2% according to the carbon, nitrogen, and total solid （TS） conversion rate, respectively. While the dry weight ratio was designed as 1 to 3, there was a respective rise of 5%, 15%, and 4% in the conversion rate of carbon, nitrogen, and TS. The enhancement of anaerobic hydrolysis from the mixed vegetable wastes and flower stems can be attributed to the formation of volatile fatty acids （VFA） and nutrient supplement like nitrogen content. The maximum VFA concentration can achieve 1.7 g/L owing to the rapid acidification of vegetable wastes, loosing the structure of lignocellulose materials. The statistic bivariate analysis revealed that the hydrolysis performance was significantly related to the physical and biochemical compositions of the feeding substrate. Especially, the soluble carbon concentration in the liquid was significantly positively correlated to the concentration of nitrogen and hemicellulose, and negatively correlated to the concentration of carbon and lignocellulose in the feeding substrate, suggesting that the regulation and control of feedstock can have an important influence on the anaerobic hydrolysis of organic wastes.

关键词： municipal solid wastes hydrolysis feedstock characteristics VFA bivariate analysis

Influence of extrusion temperature on microstructure and mechanical properties of Mg-4Y-4Sm-0.5Zr alloy

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2010年第7期20卷 1311-1315页

作者：李大全王渠东丁文江 J.J.BLANDIN M.SUéRY National Engineering Research Center for Nonferrous Metals Composites General Research Institute for Nonferrous Metals National Engineering Research Center of Light Alloys Net Forming State Key Laboratory of Metal Matrix CompositesSchool of Materials Science and EngineeringShanghai Jiao Tong University Universitéde Grenoble Grenoble INPScience et Ingénieriedes Matériaux et Procédés(SIMAP) CNRS UMR 5266UJFBP 4638402 Saint-Martin d'Héres CedexFrance

The solution-treated Mg-4Y-4Sm-0.5Zr alloy was extruded at temperatures from 325℃ to 500℃.Dynamic recrystallization(DRX) completely occurs when the alloy is extruded at 350℃and *** grains of the extruded alloy are obviously refined by the occurrence of *** average grain size of the extruded alloy increases with increasing the extrusion temperature,leading to a slight decrease of the ultimate tensile strength(UTS) and the yield strength(YS) .On the contrary,the UTS and YS of the extruded and aged alloy increase with increasing the extrusion *** of UTS of 400 MPa,YS larger than 300 MPa and elongation(EL) of 7%are achieved after extrusion at 400℃ and ageing at 200℃ for 16 *** grain refinement and precipitation are efficient strengthening mechanisms for the Mg-4Y-4Sm-0.5Zr alloy.

关键词：挤压温度合金模型力学性能平均晶粒尺寸动态再结晶铸造晶粒细化

Effects of Ho on the microstructure and mechanical properties of Mg-Zn-Ho-Zr magnesium alloys

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2011年第2期30卷 131-136页

作者： LI Daquan WANG Qudong DING Wenjiang National Engineering Research Center for Nonferrous Metals Compositions General Research Institute for Nonferrous Metals Beijing 100088 China National Engineering Research Center of Light Alloys Net Forming and State Key Laboratory of Metal Matrix Composites School of Materials Science and Engineering Shanghai Jiaotong University Shanghai 200240 China

The microstructure and mechanical properties of Mg-Zn-Ho-Zr alloys have been investigated in detail. The grain size of the as-cast Mg-Zn-Ho-Zr alloy was greatly decreased by the addition of Ho, and the grain growth during solution treatment was suppressed by Mg-Zn-Ho phases formed at grain boundaries. These thermally stable Mg-Zn-Ho phases could not completely dissolve into the matrix dur- ing solution treatment, and the strengthening effect of solution-plus-ageing treatment weakened. The addition of Ho can greatly enhance the high-temperature elongation of the Mg-Zn-Ho-Zr alloy, but the increase of high-temperature tensile strength was just a little.

关键词： magnesium alloys holmium rare earth additions heat treatment microstmcture mechanical properties

Search for the rare decays W^(+)→D_(s)^(+)γ and Z→D^(0)γ at LHCb

在线全文

学校读者我要写书评

暂无评论

中国物理C:英文版 2023年第9期47卷 14-26页

作者： R.Aaij A.S.W.Abdelmotteleb C.Abellan Beteta F.Abudinén T.Ackernley B.Adeva M.Adinolfi P.Adlarson H.Afsharnia C.Agapopoulou C.A.Aidala Z.Ajaltouni S.Akar K.Akiba J.Albrecht F.Alessio M.Alexander A.Alfonso Albero Z.Aliouche P.Alvarez Cartelle R.Amalric S.Amato J.L.Amey Y.Amhis L.An L.Anderlini M.Andersson A.Andreianov M.Andreotti D.Andreou D.Ao F.Archilli A.Artamonov M.Artuso E.Aslanides M.Atzeni B.Audurier S.Bachmann M.Bachmayer J.J.Back A.Bailly-reyre P.Baladron Rodriguez V.Balagura W.Baldini J.Baptista de Souza Leite M.Barbetti R.J.Barlow S.Barsuk W.Barter M.Bartolini F.Baryshnikov J.M.Basels G.Bassi B.Batsukh A.Battig A.Bay A.Beck M.Becker F.Bedeschi I.B.Bediaga A.Beiter V.Belavin S.Belin V.Bellee K.Belous I.Belov I.Belyaev G.Benane G.Bencivenni E.Ben-Haim A.Berezhnoy *** *** Andres D.Berninghoff H.C.Bernstein C.Bertella A.Bertolin C.Betancourt F.Betti Ia.Bezshyiko S.Bhasin J.Bhom L.Bian M.S.Bieker N.V.Biesuz S.Bifani P.Billoir A.Biolchini M.Birch F.C.R.Bishop A.Bitadze A.Bizzeti M.P.Blago T.Blake F.Blanc J.E.Blank S.Blusk D.Bobulska J.A.Boelhauve O.Boente Garcia T.Boettcher A.Boldyrev C.S.Bolognani R.Bolzonella N.Bondar F.Borgato S.Borghi M.Borsato J.T.Borsuk S.A.Bouchiba T.J.V.Bowcock A.Boyer C.Bozzi M.J.Bradley S.Braun A.Brea Rodriguez J.Brodzicka A.Brossa Gonzalo J.Brown D.Brundu A.Buonaura L.Buonincontri A.T.Burke C.Burr A.Bursche A.Butkevich J.S.Butter J.Buytaert W.Byczynski S.Cadeddu H.Cai R.Calabrese L.Calefice S.Cali R.Calladine M.Calvi M.Calvo Gomez P.Campana D.H.Campora Perez A.F.Campoverde Quezada S.Capelli L.Capriotti A.Carbone G.Carboni R.Cardinale A.Cardini P.Carniti L.Carus A.Casais Vidal R.Caspary G.Casse M.Cattaneo G.Cavallero V.Cavallini S.Celani J.Cerasoli D.Cervenkov A.J.Chadwick M.G.Chapman M.Charles Ph.Charpentier C.A.Chavez Barajas M.Chefdeville C.Chen S.Chen A.Chernov S.Chernyshenko V.Chobanova S.Cholak M.Chrzaszcz A.Chubykin V.Chulikov P.Ciambrone M.F.Cicala X.Cid Vidal G.Ciezarek G.Ciullo P.E.L.Clarke M.Clemencic H.V.Cliff J.Closier J.L.Cobbledick V.Coco J.A.B.Coelho J.Cogan E.Cognera Centro Brasileiro de Pesquisas Físicas(CBPF) Rio de JaneiroBrazil Universidade Federal do Rio de Janeiro(UFRJ) Rio de JaneiroBrazil Center for High Energy Physics Tsinghua UniversityBeijingChina Institute Of High Energy Physics(IHEP) BeijingChina School of Physics State Key Laboratory of Nuclear Physics and technology Peking UniversityBeijingChina University of Chinese Academy of sciences BeijingChina Institute of Particle Physics Central China Normal UniversityWuhanHubeiChina Université Savoie Mont Blanc CNRSIN2P3-LAPPAnnecyFrance UniversitéClermont Auvergne CNRS/IN2P3LPCClermont-FerrandFrance Aix Marseille Univ CNRS/IN2P3CPPMMarseilleFrance UniversitéParis-Saclay CNRS/IN2P3IJCLabOrsayFrance Laboratoire Leprince-Ringuet CNRS/IN2P3Ecole PolytechniqueInstitut Polytechnique de ParisPalaiseauFrance LPNHE Sorbonne UniversitéParis Diderot Sorbonne Paris CitéCNRS/IN2P3ParisFrance I.Physikalisches Institut RWTH Aachen UniversityAachenGermany Fakultat Physik Technische Universitat DortmundDortmundGermany Max-Planck-Institut für Kernphysik(MPIK) HeidelbergGermany Physikalisches Institut Ruprecht-Karls-Universitat HeidelbergHeidelbergGermany School of Physics University College DublinDublinIreland INFN Sezione di Bari BariItaly INFN Sezione di Bologna BolognaItaly INFN Sezione di Ferrara FerraraItaly INFN Sezione di Firenze FirenzeItaly INFN Laboratori Nazionali di Frascati FrascatiItaly INFN Sezione di Genova GenovaItaly INFN Sezione di Milano MilanoItaly INFN Sezione di Milano-Bicocca MilanoItaly INFN Sezione di Cagliari MonserratoItaly Universitàdegli Studi di Padova Universitàe INFNPadovaPadovaItaly INFN Sezione di Pisa PisaItaly INFN Sezione di Roma La Sapienza RomaItaly INFN Sezione di Roma Tor Vergata RomaItaly Nikhef National Institute for Subatomic Physics AmsterdamNetherlands Nikhef National Institute for Subatomic Physics and VU University Amsterdam AmsterdamNetherlands AGH-University of science and technology Faculty of Physics and Applied Computer Scienc

A search for the rare decays W^(+)→D_(s)^(+)γ and Z→D0γis performed using proton-proton collision data collected by the LHCb experiment at a centre-of-mass energy of 13TeV,corresponding to an integrated luminosity of 2.0fb−*** significant signal is observed for either decay mode and upper limits on their branching fractions are set using W^(+)→D_(s)^(+)γ and Z→μ+μ−decays as normalization *** upper limits are 6.5×10^(−4) and 2.1×10^(−3) at 95% confidence level for the W^(+)→D_(s)^(+)γ and Z→D^(0)γ decay modes,*** is the first reported search for the Z→D^(0)γ decay,while the upper limit on the W+→D+sγbranching fraction improves upon the previous best limit.

关键词： W/Z boson rare decay upper limit of branching fraction

Effects of aging on the microstructures and mechanical properties of extruded AM50+xCa magnesium alloys

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2006年第4期25卷 377-381页

作者： WANG Qudong PENG Jianguo Suéry Michel Jean-Jacques Blandin National Engineering Research Centre of Light Alloys Net Forming School of Materials Science and Engineering Shanghai Jiaotong UniversityShanghai 200030 China Institute National Polytechnique de Grenoble （INPG） Génie Physique et Mécanique des Matériaux （GPM2） UMR CNRS 5010 ENSPG BP46 38402 Saint-Martin d＇Héres Cedex France

The effects of aging treatment on the microstructures and mechanical properties of extruded AM50 ＋ xCa alloys （x=0, 1, 2 wt.%） were studied. The results indicated the secondary phase Mgl7Al12 precipitated from the saturated α-Mg solid solution while Al2Ca changed slightly when the aging time was increased. The hardness of extruded AM50 ＋ xCa al- loys increased initially to its peak, and then dropped to reach its original hardness with the increase in aging time. With the increase in aging temperature, the hardness of the AM50 ＋ 2Ca ahoy decreased, whereas the hardness of AM50 and AM50 ＋ 1Ca alloys decreased in the initial stages of aging treatment and increased in the later stages of aging treatment. The tensile strengths of AM50 and AM50 ＋ 1Ca alloys increased after aging treatment for the precipitation of Mg17Al12 phase, which increases the resistance against dislocation movement at the grain boundary; with increase in aging temperature, their tensile strengths increased. For AM50 ＋ 2Ca alloy, the tensile strength declined after aging at 150℃ and 175℃, while it increased slightly at 200℃. The ductility of AM50 ＋ xCa alloys （x = 0, 1, 2 wt.%） declined after aging treatment.

关键词： AM50 + xCa alloys aging extrusion mechanical properties

Engineering a light–matter strong coupling regime in perovskite-based plasmonic metasurface: quasi-bound state in the continuum and exceptional points

在线全文

学校读者我要写书评

暂无评论

Photonics Research 2020年第12期8卷 I0005-I0014页

作者： LERAN LU QUYNH LE-VAN LYDIE FERRIER EMMANUEL DROUARD CHRISTIAN SEASSAL HAI SON NGUYEN Universitéde Lyon Institut des Nanotechnologies de LyonINL/CNRSEcole Centrale de Lyon36 avenue Guy de Collongue69130 EcullyFrance College of Engineering and Computer science VinUniversityHanoi 14000Vietnam Universitéde Lyon Institut des Nanotechnologies de LyonINL/CNRSINSA-Lyon7 avenue Jean Capelle69621 VilleurbanneFrance Institut Universitaire de France(IUF) ParisFrance

We present theoretically the formation of exciton–photon polaritons and exciton-surface plasmon polaritons in a perovskite-based subwavelength lattice on the metallic *** is shown that the later polaritons will be achieved as the perovskite layer is ultra-thin(<50 nm),while the co-existence of both polaritons will dominate,as the thickness of the perovskite metasurface approaches *** the two cases,the lower polaritonic branches consist of dark and bright modes corresponding to infinite and finite radiative quality factors,*** salient property in this work is that it allows one to obtain exceptional points(EPs)in momentum space with a four-fold enhancement of local density of states through engineering the perovskite *** findings show that the perovskite metasurface is an attractive and rich platform to make polaritonic devices,even with the presence of a lossy metallic layer.

关键词： surface. perovskite exceptional

在线全文

学校读者我要写书评

暂无评论

双J/ψ介子不变质量谱中首次发现新型结构

science Bulletin 2020年第23期65卷 1983-1993,M0004页

作者：大型强子对撞机底夸克实验(LHCb)合作组 Nikhef National Institute for Subatomic Physics Netherlands Amsterdam Physik-Institut Universitat Zurich Switzerland Zurich Oliver Lodge Laboratory University of Liverpool United Kingdom Liverpool Instituto Galego de Fisica de Altas Enerxias (IGFAE) Universidade de Santiago de Compostela Spain Santiago de Compostela H.H. Wills Physics Laboratory University of Bristol United Kingdom Bristol Universite Clermont Auvergne CNRS/IN2P3LPC France Clermont-Ferrand University of Michigan United States Ann Arbor INFN Sezione di Milano Italy Milano University of Cincinnati United States Cincinnati Fakultat Physik Technische Universitat Dortmund Germany Dortmund European Organization for Nuclear Research (CERN) Switzerland Geneva School of Physics and Astronomy University of Glasgow United Kingdom Glasgow ICCUB Universitat de Barcelona Spain Barcelona Department of Physics and Astronomy University of Manchester United Kingdom Manchester Petersburg Nuclear Physics Institute NRC Kurchatov Institute (PNPI NRC KI) Russia Gatchina Universidade Federal do Rio de Janeiro (UFRJ) Brazil Rio de Janeiro Universite Paris-Saclay CNRS/IN2P3IJCLab France Orsay INFN Sezione di Firenze Italy Firenze Institute of Physics Ecole Polytechnique Federale de Lausanne (EPFL) Switzerland Lausanne INFN Sezione di Ferrara Italy Ferrara Physikalisches Institut Ruprecht-Karls-Universitat Heidelberg Germany Heidelberg Institute for High Energy Physics NRC Kurchatov Institute (IHEP NRC KI) ProtvinoRussia Russia Protvino Syracuse University United States Syracuse Yandex School of Data Analysis Russia Moscow Aix Marseille Univ CNRS/IN2P3CPPM France Marseille Department of Physics University of Warwick United Kingdom Coventry Imperial College London United Kingdom London Laboratoire Leprince-Ringuet France Palaiseau Centro Brasileiro de Pesquisas Fisicas (CBPF) Brazil Rio de Janeiro INFN Sezione di Genova Italy Genova Universita di Genova Italy Genova National University of science and Technolog

除介子和重子之外的由夸克和胶子组成的粒子统称奇异强子.对奇异强子的研究可以加深对强相互作用的理解.利用质心能量为7、8和13 TeV,总积分亮度为9 fb-1的质子-质子对撞数据,大型强子对撞机底夸克实验(LHCb)研究了双J/ψ介子的不变质... 详细信息

除介子和重子之外的由夸克和胶子组成的粒子统称奇异强子.对奇异强子的研究可以加深对强相互作用的理解.利用质心能量为7、8和13 TeV,总积分亮度为9 fb-1的质子-质子对撞数据,大型强子对撞机底夸克实验(LHCb)研究了双J/ψ介子的不变质量分布.实验在6.9 GeV/c2附近观测到一个符合共振态谱形的窄峰(X(6900))并在两倍于J/ψ介子质量(≈6.2 GeV/c2)以上看到一个较宽的凸起结构.在超过5倍标准偏差的显著水平上,实验数据排除了6.2到7.4 GeV/c2的质量范围内不含任何共振态的假设,这个质量范围涵盖了理论模型预言的由四个粲夸克组成的强子态的质量.基于X(6900)结构的不变质量分布呈现Breit-Wigner谱形的假设,实验对它的质量和自然宽度进行了测量.此次发现将有助于理解强子内部的强相互作用机制,进而推动量子色动力学的理论研究.

关键词：量子色动力学大型强子对撞机强相互作用强子显著水平共振态质量范围粲夸克