检索结果-南通市图书馆

Comparison of the hygrothermal performance of two light-framed timber structure buildings under different operation modes

引用

Journal of Zhejiang University-Science A(Applied Physics & engineering) 2024年第1期25卷 18-35页

作者： Wanqing XU Yucong XUE Jiang LU Yifan FAN Xiaoyu LUO College of Civil engineering and Architecture Zhejiang UniversityHangzhou310058China International Research Center for Green building and Low-Carbon City International CampusZhejiang UniversityJiaxing314400China School of Civil engineering and Architecture Zhejiang University of Science and TechnologyHangzhou310023China

Light-framed timber structure(LTS)buildings have been highly valued in recent years due to their low-carbon ***,the applicability of the building envelope is closely related to indoor and outdoor *** hot summer and cold winter(HSCW)climate zone in China has high humidity and great temperature variation throughout the year,resulting in distinct outdoor environments in different *** indoor environment is greatly affected by energy-consumption patterns and window-opening habits,which largely depend upon the regulation operations of *** these interrelated factors lead to extremely complex boundary conditions on each side of the building *** the structures of LTS buildings are applicable in this climate zone,therefore,needs to be carefully *** this study,two LTS buildings with different envelopes were established in Haining,China,situated in the HSCW climate zone,and selected as the study *** operation modes were adopted to create a variety of indoor *** each condition,the processes of heat and moisture transfer within the building envelopes and the indoor environment were monitored and *** comparison indicated that the building envelope with high moisture storage and insulation ability maintained a relatively stable indoor environment,especially when the environment changed ***,if the outdoor environment was equable(e.g.,relative humidity within the range of 30%–60%)or intermittent energy consumption modes were adopted,the building envelope with a low thermal inertia index and weak moisture-buffering ability performed better because it enabled a faster response of the indoor environment to air ***,a high risk of moisture accumulation between the thermal insulation layer and other materials with a large water vapour transfer resistance factor was also identified,suggesting a higher requirement for the vapour insulation of the env

关键词： Light-framed timber structure(LTS)buildings In-situ experiment Typical operation mode Indoor environment Heatand moisture transfer

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A review of low-carbon technologies and projects for the global cement industry

引用

Journal of Environmental Sciences 2024年第2期136卷 682-697页

作者： Yangyang Guo Lei Luo Tingting Liu Liwei Hao Yinming Li Pengfei Liu Tingyu Zhu CAS Key Laboratory of Green Process and engineering Institute of Process EngineeringInnovation Academy for Green ManufactureChinese Academy of SciencesBeijing 100190China Center for Excellence in Regional Atmospheric Environment Institute of Urban EnvironmentChinese Academy of SciencesXiamen 361021China State Key Laboratory of Solid Waste Reuse for building Materials Beijing Building Materials Academy of Sciences ResearchBeijing 100041China Ganjiang Innovation Academy Chinese Academy of SciencesGanzhou 341000China

Carbon dioxide(CO_(2))emissions from the cement industry account for 26%of the total industrial emissions,and the need to develop low-carbon techniques within the cement industry is extremely ***-carbon projects and technologies for the cement industry in different regions and countries have been thoroughly reviewed in this manuscript,and the low-carbon development concept for each county has been *** developing countries such as China and India,energy saving and efficiency enhancement are currently the key points,while for developed countries and regions such as Europe,more efforts have been focused on carbon capture,utilization,and storage(CCUS).Global CCUS projects have been previously conducted,and the majority of CCUS projects are currently performed in Europe where major projects such as the CEMCAP,CLEANKER,and IEILAC projects represent the latest research progress in cement production technologies and low-carbon technologies for the global cement *** development of low-carbon cement technologies has changed from focusing on the end point to instead focusing on the source and process through the exploration of hydrogen and solar energies,and more disruptive and original technologies are expected to be developed,particularly in the cement industry in China.

关键词： Cement industry CO_(2)emissions Low carbon development Projects Carbon capture utilization and storage

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Hydroxyl radical production by abiotic oxidation of pyrite under estuarine conditions:The effects of aging,seawater anions and illumination

引用

Journal of Environmental Sciences 2024年第1期135卷 715-727页

作者： Ruixue Liu Yinshun Dai Yucheng Feng Shiwen Sun Xiaodong Zhang Chunjiang An Shan Zhao Shandong Key Laboratory of Water Pollution Control and Resource Reuse School of Environmental Science and EngineeringShandong UniversityQingdao 266237China Department of building Civil and Environmental EngineeringConcordia UniversityMontrealQC H3G 1M8Canada

Pyrite is widely distributed in estuarine sediments as an inexpensive natural Fenton-like reagent,however,the mechanism on the hydroxyl radical(HO^(·))production by pyrite under estuarine environmental conditions is still poorly *** batch experiments were performed to investigate the effects of estuarine conditions including aging(in air,in water),seawater anions(Cl^(-),Br^(-)and HCO_(3)^(-))and light on the HO^(·)production by pyrite *** one-electron transfer dominated the process from O_(2) to HO^(·)induced by oxidation of *** Fe(oxyhydr)oxide coatings on the surface of pyrite aged in air and water consumed hydrogen peroxide while mediating the electron transfer,and the combined effect of the two resulted in a suppression of HO^(·)production in the early stage of aging and a promotion of HO^(·)production in the later stage of *** of the surface oxide layers by aggressive anions was the main reason for the inhibition of HO^(·)production by Cl^(-)and Br^(-),and the generation of Cl^(·)and Br^(·)may also play a role in the scavenging of HO^(·).HCO_(3)^(-)increased the average rate of HO^(·)production through surface-CO_(2) complexes formed by adsorption on the surface of *** significant enhancement of HO^(·)production under light was attributed to the formation of photoelectrons induced by photochemical reactions on pyrite and its surface oxide *** findings provide new insights into the environmental chemical behavior of pyrite in the estuary and enrich the understanding of natural remediation of estuarine environments.

关键词： Hydroxyl radical Pyrite oxidation Aging Anions Irradiation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In search of optimal building behavior models for model predictive control in the context of flexibility

引用

building Simulation 2024年第1期17卷 71-91页

作者： Arash Erfani Tohid Jafarinejad Staf Roels Dirk Saelens KU Leuven Department of Civil EngineeringBuilding Physics and Sustainable Design SectionKasteelpark Arenberg 40 Bus 24473001 HeverleeBelgium EnergyVille Thor Park 8310Genk 3600Belgium

Model predictive control(MPC)is an advanced control *** has been deployed to harness the energy flexibility of a *** requires a dynamic model of the building to achieve such an ***,developing a suitable predictive model is the main challenge in MPC implementation forflexibility *** studyfocuses on the application of key performance indicators(KPls)to evaluate the suitability of MPC models via feature *** this end,multiple models were developed for two houses.A feature selection method was developed to select an appropriate feature space to train the *** predictive models were then quantified based on one-step ahead prediction error(OSPE),a standard KPI used in multiple studies,and a less-often KPl:multi-step ahead prediction error(MSPE).An MPC workflow was designed where different models can serve as the predictive *** showed that MSPE better demonstrates the performance of predictive models used for flexibility *** revealed that up to 57% of the flexibility potential and 48% of energy use reduction are not exploited if MSPE is not minimized while developing a predictive model.

关键词： building flexibility model predictive control for building building behaviour identification smart home

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Evolution of inclusions in vacuum induction melting of superalloys containing 70%return material

引用

Journal of Iron and Steel Research International 2024年第3期31卷 719-728页

作者： Jin-guo Gao Shu-lei Yang Shu-feng Yang Jing-she Li Wei Liu Meng-jing Zhao An-ren Wang School of Metallurgical and Ecological engineering University of Science and Technology BeijingBeijing 100083China State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China Metallurgical and building Materials Business Department China International Engineering Consulting CorporationBeijing 100048China

The variation law of inclusions type and size in the vacuum induction melting process and ingot of Ni-based superalloy containing 70%return material was studied by industrial test sampling,and the mechanism of inclusions formation was analyzed with thermodynamic *** results show that there are mainly two types of composite inclusions in the vacuum induction melting of Ni-based superalloys,which are nitride-and oxide-based composite inclusions,like Al_(2)O_(3)-SiO_(2)-Cr_(2)O_(3),TiN-(Mo,Nb)C,*** type and proportion of inclusions from the center to the edge of the vacuum induction ingot did not change *** number density of inclusions from the center to the edge of the ingot varied less,and the size of inclusions became smaller from the center to the *** addition,thermodynamic calculations show that oxides(M_(2)O_(3))are present in the liquid phase and mainly contain Al,Ti,Cr,Fe and O *** nitride consists mainly of Ti and N and contains small amounts of Cr,C,Nb,and Mo *** is consistent with the results of industrial *** the temperature decreases,the precipitation phases such as M_(2)O_(3),MN,γ,MC,δ,γ'andμphases are gradually precipitated,where oxides and nitrides are present in the liquid *** contents of O and N elements are the main influencing factors for the inclusions content and precipitation temperature;when the nitrogen content is reduced to below 0.0015%,it can make MN precipitate below the liquid-phase line.

关键词： Ni-based superalloy Vacuum induction melting Return material Inclusion Thermodynamic

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparison of models to predict air infiltration rate of buildings with different surrounding environments

引用

building Simulation 2024年第6期17卷 1007-1021页

作者： Shu Zheng Xiujiao Song Lin Duanmu Yu Xue Xudong Yang Department of building Science Tsinghua UniversityBeijing100084China School of Civil engineering Dalian University of TechnologyDalian116024China Shanxi Research Institute for Clean Energy Tsinghua UniversityTaiyuan030032China

The air infiltration rate of buildings strongly influences indoor environment and energy *** this study,several traditional methods for determining the air infiltration rate were compared,and their accuracy in different scenarios was ***,a method combining computational flow dynamics(CFD)with the Swami and Chandra(S-C)model was developed to predict the influence of the surrounding environment on the air infiltration *** buildings in Dalian,China,were selected:one with a simple surrounding environment and the other with a complex surrounding environment;their air infiltration rates were *** test results were used to validate the accuracy of the air infiltration rate solution models in different urban *** the building with a simple environment,the difference between the simulation and experimental results was 0.86%–22.52%.For the building with a complex environment,this difference ranged from 17.42%to 159.28%.We found that most traditional models provide accurate results for buildings with simple surrounding and that the simulation results widely vary for buildings with complex *** results of the method of combining CFD with the S-C model were more accurate,and the relative error between the simulation and test results was 10.61%.The results indicate that the environment around the building should be fully considered when calculating the air infiltration *** results of this study can guide the application of methods of determining air infiltration rate.

关键词： air infiltration rate models CFD simulation building surrounding air infiltration rate test

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Natural high-porous diatomaceous-earth based self-floating aerogel for efficient solar steam power generation

引用

Green Energy & Environment 2024年第2期9卷 378-389页

作者： Aitang Zhang Kai Wang Md Julker Nine Mengyu Cao Hanwen Zong Zhiqiang Liu Hanwen Guo Jingquan Liu Dusan Losic College of Materials Science and engineering Institute for Graphene Applied Technology InnovationCollaborative Innovation Center for Marine Biomass Fibers Materials and Textiles of Shandong ProvinceQingdao UniversityQingdao266071China The University of Adelaide School of Chemical Engineering and Advanced MaterialsARC Graphene Research HubNorth Engineering BuildingN206 AdelaideSA 5005Australia

The application of solar steam generation in seawater desalination is an effective way to solve the shortage of fresh water *** present,many kinds of photothermal conversion materials have been developed and used as evaporators in seawater ***,some evaporators need additional thermal insulation or water supply devices to achieve efficient photothermal *** addition,their complex,time consuming and no scalable preparation process,high cost of raw materials and poor salt resistance hinder the practical application of these *** to its distinctive nanoporous structure,diatomite as fossilized single-cells algae diatoms is a promising natural silica-based material for seawater *** are taken from sea and that makes true sense to use them in the ***,we report the first example of synthesis robust three-dimensional(3D)natural-diatomite composite by assembling polyaniline nanoparticles covered diatomite into the polyvinyl alcohol pre-treated melamine foam frameworks and demonstrate its application as new evaporator for seawater *** porous framework does not only improve the sunlight scattering efficiency,but also offer large network of channels for water *** inherent mechanism behind salt desalination process involves the absorption of water molecules on the surface of the internal silica micro-nano pores,and evaporation under the heat induced by the polyaniline absorbed ***,the metal ions are segregated by many available pores and channels to achieve the self-desalting *** developed evaporator possesses the superiority of multi-stage pore structure,strong hydrophilicity,low thermal conductivity,excellent light absorption,fast water transportation and salt-resistant crystallization as well as good *** evaporation rate without an additional device is found to be 1.689 kg m^(-2)h^(-1)under 1-Sun irradiation,and the energy conversion efficiency is as

关键词： Diatomite Micro/nanopores Polyaniline Three-dimensional composite Solar steam generation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pedestrian wind flow prediction using spatial-frequency generative adversarial network

引用

building Simulation 2024年第2期17卷 319-334页

作者： Pengyue Wang Maozu Guo Yingeng Cao Shimeng Hao Xiaoping Zhou Lingling Zhao School of Architecture and Urban Planning Beijing University of Civil Engineering and ArchitectureBeijing100044China Beijing Key Laboratory of Intelligent Processing for building Big Data Beijing100044China School of Electrical and Information engineering Beijing University of Civil Engineering and ArchitectureBeijing100044China School of Computer Science and Technology Harbin Institute of TechnologyHarbin150001China

Pedestrian wind flow is a critical factor in designing livable residential environments under growing complex urban *** pedestrian wind flow during the early design stages is essential but currently suffers from inefficiencies in numerical *** learning,particularly generative adversarial networks(GAN),has been increasingly adopted as an alternative method to provide efficient prediction of pedestrian wind ***,existing GAN-based wind flow prediction schemes have limitations due to the lack of considering the spatial and frequency characteristics of wind flow *** study proposes a novel approach termed SFGAN,which embeds spatial and frequency characteristics to enhance pedestrian wind flow *** the spatial domain,Gaussian blur is employed to decompose wind flow into components containing wind speed and distinguished flow edges,which are used as the embedded spatial *** information of wind flow is obtained through discrete wavelet transformation and used as the embedded frequency *** spatial and frequency characteristics of wind flow are jointly utilized to enforce consistency between the predicted wind flow and ground truth during the training phase,thereby leading to enhanced *** results demonstrate that SFGAN clearly improves wind flow prediction,reducing Wind_MAE,Wind_RMSE and the Fréchet Inception Distance(FID)score by 5.35%,6.52%and 12.30%,compared to the previous best method,*** also analyze the effectiveness of incorporating the spatial and frequency characteristics of wind flow in predicting pedestrian wind *** reduces errors in predicting wind flow at large error intervals and performs well in wake regions and regions surrounding *** enhanced predictions provide a better understanding of performance variability,bringing insights at the early design stage to improve pedestrian wind *** proposed spatial-frequen

关键词： pedestrian wind flow prediction generative adversarial network Gaussian kernel wavelet transform objective function

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Design parameter optimization method for a prestressed steel structure driven by multi-factor coupling

引用

Frontiers of Structural and Civil engineering 2024年第7期18卷 1066-1083页

作者： Guo-Liang SHI Zhan-Sheng LIU De-Chun LU Qing-Wen ZHANG Majid DEZHKAM Ze-Qiang WANG Faculty of Architecture Civil and Transportation EngineeringBeijing University of TechnologyBeijing 100124China The Key Laboratory of Urban Security and Disaster engineering of the Ministry of Education Beijing University of TechnologyBeijing 100124China Beijing building Construction Research Institute Co. Ltd.Beijing 100039China

To achieve efficient structural design,it is crucial to reduce the cost of materials while ensuring structural *** study proposes an optimization method for design parameters(DPs)in a prestressed steel structure driven by multi-factor *** accomplish this,a numerical proxy model of prestressed steel structures is established with integration of DPs and mechanical parameters(MPs).A data association-parameter analysis-optimization selection system is established.A correlation between DPs and MPs is established using a back propagation(BP)neural *** correlation provides samples for parameter analysis and optimization *** are used to characterize the safety of the *** on the safety grade analysis,the key DPs that affect the mechanical properties of the structure are obtained.A mapping function is created to match the MPs and the key *** optimal structural DPs are obtained by setting structural materials as the optimization objective and safety energy as the constraint *** theoretical model is applied to an 80-m-span gymnasium and verified with a scale test physical *** MPs obtained using the proposed method are in good agreement with the experimental *** with the traditional design method,the design cycle can be shortened by more than 90%.Driven by the optimal selection method,a saving of more than 20% can be achieved through reduction of structural material ***,the cross-sectional dimensions of radial cables have a substantial influence on vertical *** initial tension and cross-sectional size of the upper radial cable exhibit the most pronounced impact on the stress distribution in that *** initial tension and cross-sectional size of the lower radial cable hold the greatest sway over the stress distribution in that cable.

关键词： structure design association relationship performance analysis optimum selection experimental verification

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

An integrated computational method for calculating dynamic thermal bridges of building facades in tropical countries

引用

Frontiers of Architectural Research 2024年第1期13卷 201-218页

作者： Miktha Farid Alkadri Muhammad Rafif Cahyadi Agung Francesco De Luca Research Cluster of Architectural Sciences and building Technology Department of ArchitectureFaculty of EngineeringUniversitas IndonesiaDepok 16425Indonesia Department of Civil engineering and Architecture Tallinn University of TechnologyTallinn 19086Estonia

Identifying thermal bridges on building façades has been a great challenge for architects,especially during the conceptual design *** is not only due to the complexity of parameters when calculating thermal bridges,but also lack of feature integration between building energy simulation(BES)tools and the actual building *** example,existing BES tools predominantly calculate thermal bridges only in steady state without considering the temperature dynamic behaviour of building ***,relevant features such as thermal delay,decrement factor,and operative temperature are often neglected,and this can lead to miscalculation of energy *** study then proposes an integrated method to calculate dynamic thermal bridges under transient conditions by incorporating field observations and computational simulations of thermal *** specifically,the proposed method employs several measurement tools such as HOBO data logger to record the actual conditions of indoor and outdoor room temperature and thermal cameras to identify the surface temperature of selected building *** actual datasets are then integrated with the simulation workflow developed in BES *** study ultimately enables architects not only to identify potential thermal bridges on existing building façades but also to support material and geometric exploration in early design phase.

关键词： Thermal bridges Dynamic calculation Thermal delay Cooling load Computational design method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：