检索结果-南通市图书馆

Influence of curing conditions on the shrinkage behavior of three-dimensional printed concrete formwork

Frontiers of Structural and Civil engineering 2024年第8期18卷 1225-1236页

作者： M.BEKAERT K.van TITTELBOOM G.de SCHUTTER Magnel-Vandepitte Laboratory for structural engineering and building Materials Department of Structural Engineering and Building MaterialsFaculty of Engineering and ArchitectureGhent UniversityGhent 60 B-9052Belgium

The use of three-dimensional(3D)printed concrete as formwork is becoming more widely applied within the ***,the technology is still not optimized and there are many reports of preliminary cracking during the curing of cast *** is believed to result from differential shrinkage between the printed and cast *** cracks(in the printed concrete or at the interface between the infill and printed concrete)form a preferential path for aggressive substances and can reduce the durability of the combined concrete *** ensure the desired service life of the structure,it is important that the differential shrinkage between cast and printed concrete is *** study investigated the effect of curing conditions on the differential shrinkage behavior of 3D and cast *** influence of prewetting of the dry-cured 3D printed formwork was also *** the experimental program,a vibrated and self-compacting concrete were used as cast *** 3D printed formwork was produced and combined with cast concrete to simulate a concrete *** formwork was cured for 1,7,or 28 d exposed to the air(relative humidity:60%or 95%)or submerged in *** length change of the combined elements was observed over 56 d after concrete casting and throughout the thickness of the *** show that increasing the curing period in dry conditions of the printed concrete leads to an expansion of the formwork on the first day after *** expansion leads to a non-uniform strain evolution throughout the curing period of the combined *** concrete formwork stored in wet conditions does not expand after the casting process but tends to show a decreasing linear deformation within the whole elements.

关键词： 3D concrete printing formwork shrinkage curing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Adhesion performance of alkali-activated material for 3-dimensional printing of tunnel linings at different temperatures

引用

Frontiers of Structural and Civil engineering 2024年第1期18卷 66-79页

作者： Yaxin TAO Xiaodi DAI Geert de SCHUTTER Kim Van TITTELBOOM Department of Structural engineering and building Materials Ghent UniversityGhent 9052Belgium

Robotic-based technologies such as automated spraying or extrusion-based 3-dimensional(3D)concrete printing can be used to build tunnel linings,aiming at reducing labor and mitigating the associated safety issues,especially in the high-geothermal ***-based 3D concrete printing(3DCP)has additional advantages over automated sprayings,such as improved surface quality and no ***,the effect of different temperatures on the adhesion performance of 3D-printed materials for tunnel linings has not been *** study developed several alkali-activated slag mixtures with different activator modulus ratios to avoid the excessive use of Portland cement and enhance sustainability of 3D printable *** thermal responses of the mixtures at different temperatures of 20 and 40℃ were *** adhesion strength of the alkali-activated material was evaluated for both early and later ***,the structural evolution of the material exposed to different temperatures was *** was followed by microstructure *** indicate that elevated temperatures accelerate material reactions,resulting in improved early-age adhesion ***,higher temperatures contribute to the development of a denser microstructure and enhanced mechanical strength in the hardened stage,particularly in mixtures with higher silicate content.

关键词： alkali-activated material 3DCP tunnel lining high-geothermal environment adhesion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimization study of spherical tuyere based on BP neural network and new evaluation index

引用

building Simulation 2024年第2期17卷 223-234页

作者： Mengchao Liu Ran Gao Yi Wang Angui Li School of building Services Science and engineering Xi’an University of Architecture and TechnologyXi’an710055China

The energy consumption of heating,ventilation,and air conditioning(HVAC)systems holds a significant position in building energy usage,accounting for about 65%of the total energy ***,with the advancement of building automation,the energy consumption of ventilation systems continues to *** study focuses on improving the performance of spherical tuyeres in HVAC *** primarily utilizes neural networks and multi-island genetic algorithms(MIGA)for multi-parameter *** employing methods such as structural parameterization,accurate and fast computational fluid dynamics(CFD)simulations,a minimized sample space,and a rational optimization strategy,the time cycle of the optimization process is ***,a new comprehensive evaluation index is proposed in this research to describe the performance of spherical tuyeres,which can be used to more accurately assess spherical tuyeres with different *** results show that by establishing a neural network prediction model and combining it with the multi-island genetic algorithm,a novel spherical tuyere design was successfully *** optimized novel spherical tuyeres achieved a 27.05%reduction in the spherical tuyeres effective index(STEI)compared to the traditional spherical ***,the resistance decreased by 15.68%,and the jet length increased by 7.57%.The experimental results demonstrate that our proposed optimization method exhibits high accuracy,good generalization capability,and excellent agreement at different Reynolds numbers.

关键词： spherical tuyeres STEI CFD ventilation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Sustainable ammonia synthesis:An in-depth review of non-thermal plasma technologies

引用

Journal of Energy Chemistry 2024年第9期96卷 1-38页

作者： Vahid Shahed Gharahshiran Ying Zheng Department of Chemical and Biochemical engineering Thompson Engineering BuildingWestern UniversityLondonON N6A 5B9Canada

Ammonia serves both as a widely used fertilizer and environmentally friendly energy source due to its high energy density,rich hydrogen content,and emissions-free ***,it offers convenient transportation and storage as a hydrogen *** dominant method used for large-scale ammonia production is the Haber-Bosch process,which requires high temperatures and pressures and is ***,non-thermal plasma offers an eco-friendly alternative for ammonia synthesis,gaining significant *** enables ammonia production at lower temperatures and pressures using plasma *** review provides insights into the catalyst and reactor developments,which are pivotal for promoting ammonia efficiency and addressing existing *** first,the reaction kinetics and mechanisms are introduced to gain a comprehensive understanding of the reaction pathways involved in plasma-assisted ammonia ***,the enhancement of ammonia synthesis efficiency is discussed by developing and optimizing plasma reactors and effective *** effect of other feeding sources,such as water and methane,instead of hydrogen is also ***,the challenges and possible solutions are outlined to facilitate energy-saving and enhance ammonia efficiency in the future.

关键词： Nitrogen fixation Ammonia synthesis NH_(3) Non-thermal plasma Ni Ru catalyst

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental study on the CO_(2) concentration and age of air distribution inside tiny sleeping spaces

引用

building Simulation 2024年第4期17卷 591-605页

作者： Jingying Zhang Yanyan Li Haiguo Yin Linfeng Liang Songmei Zu Le Gao Ying Zhang Angui Li School of building Services Science and engineering Xi’an University of Architecture and TechnologyXi’anShaanxi710055China

In recent years,rapid urban development has led to capsule hotels,sleep pods,and other tiny sleeping spaces that adapt to people’s fast-paced lives,achieving maximum functionality with a very small ***,due to the small space,human metabolic pollutant(such as CO_(2))is more likely to accumulate,and the air is not easily *** this paper,a full-size experimental platform is set up with three types of ventilation modes to explore the exclusion efficiency of metabolic pollutants and the overall distribution of age of air under these ventilation *** conclusions showed that the mean values of metabolic pollutant exclusion rates for the different ventilation modalities varied very little across the spatial dimensions of the confined space but varied considerably in the area around the *** double-side attached ventilation method was the most effective in removing human metabolic pollutants,especially in the head region(CN≥0.92),while the single-wall attached ventilation method had the best air exchange efficiency(η≥0.85).This suggests an inconsistent distribution of CO_(2) and age of air,which is contrary to general common *** conclusions of this paper can guide the design of ventilation for tiny sleeping spaces.

关键词： attached ventilation mode human metabolic pollutant indoor air quality air exchange efficiency tiny sleeping spaces

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

From ore to MOF: A case of MIL-100(Fe) production from iron ore concentrates

引用

Progress in Natural Science:Materials International 2024年第01期34卷 66-73页

作者： Miao Chang Chiyao Tang Chong-Chen Wang Chen Zhao Beijing Key Laboratory of Functional Materials for building Structure and Environment Remediation School of Environment and Energy Engineering Beijing University of Civil Engineering and Architecture

Within this work, iron ore concentrates instead of elemental iron Fe0and iron salts like Fe（NO3）3and FeCl3were selected as iron source to prepare MIL-100（Fe）(labeled as MIL-100（Fe）-ore). The corresponding synthesis cost is reduced to half of the MIL-100（Fe） produced from elemental iron and iron salts. As well, the unreacted iron ore concentrates can be easily separated from the as-prepared MIL-100（Fe）-ore by magnetic to facilitate the purification process, free of the strong acids to wash the residual iron. The as-obtained MIL-100（Fe）-ore with Langmuir surface area up to 2281.6 m2g-1displayed long-term chemical stability. Furthermore, the sorption capacity of MIL-100（Fe）-ore towards malachite green（MG） is up to 522.3 mg g-1at 25℃ and initial pH = 3.2, higher than that of MIL-100（Fe） yielded by conventional hydrothermal process. Finally, the production cost and life cycle assessment of MIL-100（Fe）-ore were compared with other traditional production procedures. The results revealed that our work greatly reduced the synthesis cost and enhanced the environmental sustainability.

关键词： Metal-organic framework Iron ore concentrates Adsorption Life cycle assessment

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

An Approach for Human Posture Recognition Based on the Fusion PSE-CNN-BiGRU Model

引用

Computer Modeling in engineering & Sciences 2024年第7期140卷 385-408页

作者： Xianghong Cao Xinyu Wang Xin Geng Donghui Wu Houru An School of building and Environment engineering Zhengzhou University of Light IndustryZhengzhou450000China

This study proposes a pose estimation-convolutional neural network-bidirectional gated recurrent unit(PSECNN-BiGRU)fusion model for human posture recognition to address low accuracy issues in abnormal posture recognition due to the loss of some feature information and the deterioration of comprehensive performance in model detection in complex home ***,the deep convolutional network is integrated with the Mediapipe framework to extract high-precision,multi-dimensional information from the key points of the human skeleton,thereby obtaining a human posture feature ***,a double-layer BiGRU algorithm is utilized to extract multi-layer,bidirectional temporal features from the human posture feature set,and a CNN network with an exponential linear unit(ELU)activation function is adopted to perform deep convolution of the feature map to extract the spatial feature of the human ***,a squeeze and excitation networks(SENet)module is introduced to adaptively learn the importance weights of each channel,enhancing the network’s focus on important ***,comparative experiments are performed on available datasets,including the public human activity recognition using smartphone dataset(UCIHAR),the public human activity recognition 70 plus dataset(HAR70PLUS),and the independently developed home abnormal behavior recognition dataset(HABRD)created by the authors’*** results show that the average accuracy of the proposed PSE-CNN-BiGRU fusion model for human posture recognition is 99.56%,89.42%,and 98.90%,respectively,which are 5.24%,5.83%,and 3.19%higher than the average accuracy of the five models proposed in the comparative literature,including CNN,GRU,and *** F1-score for abnormal posture recognition reaches 98.84%(heartache),97.18%(fall),99.6%(bellyache),and 98.27%(climbing)on the self-builtHABRDdataset,thus verifying the effectiveness,generalization,and robustness of the proposed model in enhancing human posture rec

关键词： Posture recognition mediapipe BiGRU CNN ELU attention

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Role of the Spatial Network in Urban Disaster Risk Variations:Reimagining the Notion of Spatial Vulnerability at the Urban Scale

引用

International Journal of Disaster Risk Science 2024年第3期15卷 303-316页

作者： Monia Del Pinto Ksenia Chmutina Falli Palaiologou Lee Bosher School of Architecture Building and Civil Engineering Loughborough University School of Business University of Leicester

The notion of “spatial vulnerability” is present in most disaster studies with a strong geographical connotation and accordingly is adopted at all scales, including the urban. While enabling mapping and visualizing risk patterns at macroscales, this geocentric foundation fails to capture disaster risk dynamics associated with the urban spatial network—an element that plays a significant role in the everyday and emergency functioning of cities, enabling users' movement and interaction. Yet,urban vulnerability assessment overlooks this aspect and thus leaves urban disaster risk mechanisms partially *** study investigated the role of the network of urban public open spaces(UPOS) in the creation and progression of urban disaster risk in earthquake-prone settlements. Through a multimethod approach that integrates quantitative and qualitative methods and explores spatial configuration, planning policies, and practices of use of UPOS in everyday and emergency scenarios, our study demonstrated that UPOS configuration plays an active role in urban disaster risk. Urban public open spaces impact risk by influencing the exposure of pedestrians and their capacity for self-protection. The study further reconceptualized spatial vulnerability at the urban scale, as the fraction of vulnerability associated to the spatial network, highlighting the interplay of planning policies and spatial practices in its production and progression. Our findings make the notion of spatial vulnerability less ambiguous at the urban scale, by viewing the variable as an imbalance in capacities and exposure that generates spatially unsafe conditions. This refined conceptualization of spatial vulnerability becomes a lens for a more granular approach to urban disaster risk reduction and city planning by identifying and integrating sociospatial considerations.

关键词： Central Italy Earthquakes Pedestrian evacuation Space syntax Spatial vulnerability Urban disaster risk

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Repair of Second-Generation Recycled Fine Aggregate of Waste Concrete from Freeze-Thaw Environment by Carbonation Treatment

引用

Journal of Renewable Materials 2024年第1期12卷 187-201页

作者： Jie Huang Rongbin Jiang Xiaobo Sun Yingyong Shuai School of building engineering Taizhou Polytechnic CollegeTaizhou225300China

The reuse of waste recycled concrete from harsh environments has become a research hotspot in the field of *** study investigated the repair effect of carbonation treatment on second-generation recycled fine aggregate(SRFA)obtained from recycled fine aggregate concrete(RFAC)subjected to freeze-thaw(FT)*** and after carbonation,the properties of SRFA were *** second-generation recycled fine aggregate(CSRFA)at five substitution rates(0%,25%,50%,75%,100%)to replace SRFA was used to prepare carbonated second-generation recycled fine aggregate concrete(CSRFAC).The water absorption,porosity and mechanical properties of CSRFAC were tested,and its frost-resisting durability was *** results showed after carbonation treatment,the physical properties of SRFA was improved and met the requirements of II *** micro-hardness of the interfacial transition zone and attached mortar in CSRFA was 50.5%and 31.2%higher than that in SRFA,*** the increase of CSRFA replacement rate,the water absorption and porosity of CSRFAC gradually decreased,and the mechanical properties and frost resistance of CSRFAC were gradually *** treatment effectively repairs the damage of SRFA caused by FT cycles and improves its application potential.

关键词： Carbonation treatment repair freeze-thaw cycles second-generation recycled fine aggregate

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Assessing the energy saving potential of using adaptive setpoint temperatures:The case study of a regional adaptive comfort model for Brazil in both the present and the future

引用

building Simulation 2024年第3期17卷 459-482页

作者： Daniel Sánchez-García David Bienvenido-Huertas Carlos Rubio-Bellido Ricardo Forgiarini Rupp Department of Electrical engineering University Carlos III of MadridMadridSpain Department of building Simulation ZEROCEM SLSevilleSpain Department of building Constructions University of GranadaGranadaSpain Department of building Constructions II University of SevilleSevilleSpain Section of Design for Sustainability Department of Civil and Mechanical EngineeringTechnical University of DenmarkKgs.LyngbyDenmark

It has been found in recent years that using setpoint temperatures based on adaptive thermal comfort models is a successful method of energy *** studies using adaptive setpoint temperatures incorporate international models from ASHRAE Standard 55 and *** study,however,has instead considered a regional Brazilian adaptive comfort *** study investigates the energy demand arising from the use of a local Brazilian comfort model in order to assess the energy implications from the use of the worldwide ASHRAE Standard 55 adaptive model and various fixed setpoint *** of Brazil’s climate zones,full air-conditioning,mixed-mode building operating modes,present-day climate change scenarios,and future scenarios—specifically Representative Concentration Pathways(RCP)2.6,4.5,and 8.5 for the years 2050 and 2100—have all been taken into account in building energy *** use of adaptive setpoint temperatures based on the Brazilian local model considering mixed-mode has been found to significantly reduce energy consumption when compared to static setpoint temperatures(average energy-saving values ranging from 52%to 58%)and the ASHRAE 55 adaptive model(average values ranging from 15%to 21%).Considering climate change and the mixed-mode Brazilian model,the overall energy demand for the three groups of climatic zones(annual average outdoor temperatures≤21℃,>21 and≤25℃and>25℃)ranged between 2%decrease and 5%increase,4%and 27%increase,and 13%and 45%increase,*** is concluded as a consequence that setting setpoint temperatures based on the Brazilian local adaptive comfort model is a very efficient energy-saving method.

关键词： adaptive thermal comfort building energy simulation energy efficiency climate change adaptive setpoint temperatures local comfort mode

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：