检索结果-南通市图书馆

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu Yang Lei Xiao Zhiyong Kan Jing Guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China college of materials science and Engineering Fuzhou UniversityFuzhou 350108China college of chemistry and Environmental science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical2111>-23>rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In situ polymerization of poly(3,4-ethylenedioxythiophene)protective layer towards stable zinc anode

引用

Nano Research 2025年第1期18卷 382-394页

作者： Debin Luo Peng Zhou Xiaowei Lv Panpan Sun Xiaohua Sun Hewei Zhao college of materials and Chemical Engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion MaterialsChina Three Gorges UniversityYichang 443002China Hubei Three Gorges Laboratory Yichang 443007China School of chemistry Beihang UniversityBeijing 100191China

Aqueous zinc-ion devices are considered promising candidates for energy storage due to their high safety,low cost and relatively high energy ***,the dendrite growth,hydrogen evolution reaction(HER)and corrosion of the zinc anode significantly limit the development of Zn-ion ***,an inexpensive poly(3,4-ethylenedioxythiophene)(PEDOT)protective layer was constructed in situ on the Zn surface using electropolymerization to suppress dendrite growth and side reactions,thereby enhancing the reversibility of *** and theoretical calculations revealed that this hydrophilic protective layer promotes the desolvation process of hydrated Zn^(2+)and facilitates the transport of zinc ions,thus improving the thermodynamic and kinetic properties of Zn^(2+)deposition and inhibiting interfacial side ***,the optimized PEDOT@Zn symmetric battery exhibited a cycling stability exceeding 1250 h at 0.5 mA·cm^(-2)and 0.25 mAh·cm^(-2),with a significantly reduced overpotential(from 91.8 to 35 mV).With the assistance of the PEDOT protective layer,the PEDOT@Zn//Cu battery maintained approximately 99.5%Coulombic efficiency after 450 ***-situ scanning electron microscopy(SEM)and in situ optical microscopy characterizations further confirmed that the PEDOT protective layer can effectively suppress the growth of zinc ***,the Zn-ion capacitors assembled by the PEDOT@Zn and activated carbon also demonstrated outstanding cycling stability.

关键词： zinc-ion devices zinc anode poly(3 4-ethylenedioxythiophene)(PEDOT) dendrite desolvation process

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prussian Blue Analogue‑Templated Nanocomposites for Alkali‑Ion Batteries:Progress and Perspective

引用

Nano-Micro Letters 2025年第1期17卷 216-261页

作者： Jian‑En Zhou Yilin Li Xiaoming Lin Jiaye Ye Key Laboratory of Theoretical chemistry of Environment Ministry of EducationSchool of ChemistrySouth China Normal UniversityGuangzhou 510006People’s Republic of China School of chemistry and Physics Faculty of ScienceQueensland University of Technology2 George StreetBrisbaneQLD 4000Australia Centre for materials science Queensland University of Technology2 George StreetBrisbaneQLD 4000Australia

Lithium-ion batteries(LIBs)have dominated the portable electronic and electrochemical energy markets since their commercialisation,whose high cost and lithium scarcity have prompted the development of other alkali-ion batteries(AIBs)including sodium-ion batteries(SIBs)and potassium-ion batteries(PIBs).Owing to larger ion sizes of Na^(+)and K^(+)compared with Li^(+),nanocomposites with excellent crystallinity orientation and well-developed porosity show unprecedented potential for advanced lithium/sodium/potassium *** enticing open rigid framework structures,Prussian blue analogues(PBAs)remain promising self-sacrificial templates for the preparation of various nanocomposites,whose appeal originates from the well-retained porous structures and exceptional electrochemical activities after thermal *** review focuses on the recent progress of PBA-derived nanocomposites from their fabrication,lithium/sodium/potassium storage mechanism,and applications in AIBs(LIBs,SIBs,and PIBs).To distinguish various PBA derivatives,the working mechanism and applications of PBA-templated metal oxides,metal chalcogenides,metal phosphides,and other nanocomposites are systematically evaluated,facilitating the establishment of a structure–activity correlation for these *** on the fruitful achievements of PBA-derived nanocomposites,perspectives for their future development are envisioned,aiming to narrow down the gap between laboratory study and industrial reality.

关键词： Prussian blue analogues Self-sacrificial template Lithium-ion batteries Sodium-ion batteries Potassium-ion batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

引用

Nano-Micro Letters 2025年第1期17卷 507-527页

作者： Zhiqiang Guo Di Lan Zirui Jia Zhenguo Gao Xuetao Shi Mukun He Hua Guo Guanglei Wu Pengfei Yin college of science Sichuan Agricultural UniversityYa’an 625014People’s Republic of China School of materials science and Engineering Hubei University of Automotive TechnologyShiyan 442002People’s Republic of China Institute of materials for Energy and Environment State Key Laboratory of Bio‑Fibers and Eco‑TextilesCollege of Materials Science and EngineeringQingdao UniversityQingdao 266071People’s Republic of China Shaanxi Key Laboratory of Macromolecular science and Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi’anShaanxi 710072People’s Republic of China

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly ***-component interface engineering is considered an effective means to achieve high-efficiency EMW ***,interface modulation engineering has not been fully discussed and has great potential in the field of EMW *** this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal *** utilizing the different properties of different substances,rich heterogeneous interfaces are *** effectively promotes charge transfer and enhances interfacial polarization and conduction *** prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy *** minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 ***,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel ***,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

关键词： Electrostatic spinning Component regulation Heterogeneous interfaces Electromagnetic wave absorption Corrosion protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Boosting Oxygen Evolution Reaction Performance on NiFe‑Based Catalysts Through d‑Orbital Hybridization

引用

Nano-Micro Letters 2025年第1期17卷 281-292页

作者： Xing Wang Wei Pi Sheng Hu Haifeng Bao Na Yao Wei Luo State Key Laboratory of New Textile materials and Advanced Processing Technology Key Laboratory of New Textile Materials and Applications of Hubei ProvinceSchool of Materials Science and EngineeringWuhan Textile UniversityWuhan 430200People’s Republic of China college of chemistry and Molecular sciences Wuhan UniversityWuhan 430072People’s Republic of China

Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based *** introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in ***,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this *** and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER *** critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.

关键词： NiFe-based catalysts d-orbital coupling Oxygen evolution reaction Anion exchange membrane electrolyzer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Copper-catalyzed C–H bond functionalization enabled by programmed alternating current

引用

science China chemistry 2025年第01期 10-11页

作者： Zhoumei Tan Kun Xu Chengchu Zeng Beijing Key Laboratory of Environmental and Viral Oncology College of Chemistry and Life Science Beijing University of Technology

Synthetic electrochemistry has been selected as one of the Top Ten Emerging Technologies in chemistry in 2023 by International Union of Pure and Applied chemistry (IUPAC)[1]. It has emerged as a sustainable platform for organic synthesis and has exhibited a wide range of applications from academia to industry [2]. However, electrosynthesis has been predominantly performed by using direct current (DC).

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Gradient‑Layered MXene/Hollow Lignin Nanospheres Architecture Design for Flexible and Stretchable Supercapacitors

引用

Nano-Micro Letters 2025年第2期17卷 447-462页

作者： Haonan Zhang Cheng Hao Tongtong Fu Dian Yu Jane Howe Kaiwen Chen Ning Yan Hao Ren Huamin Zhai Jiangsu Provincial Key Lab of Sustainable Pulp and Paper Technology and Biomass materials NanJing Forestry UniversityNanjing 210037People’s Republic of China Department of Chemical Engineering and Applied chemistry University of Toronto200 College StreetTorontoON M5S 3E5Canada Department of materials science and Engineering University of Toronto184 College StreetTorontoON M5S 3E4Canada college of materials science and Engineering Nanjing Forestry UniversityNanjing 210037People’s Republic of China

With the rapid development of flexible wearable electronics,the demand for stretchable energy storage devices has *** this work,a novel gradient-layered architecture was design based on single-pore hollow lignin nanospheres(HLNPs)-intercalated two-dimensional transition metal carbide(Ti_(3)C_(2)T_(x) MXene)for fabricating highly stretchable and durable *** depositing and inserting HLNPs in the MXene layers with a bottom-up decreasing gradient,a multilayered porous MXene structure with smooth ion channels was constructed by reducing the overstacking of MXene ***,the micro-chamber architecture of thin-walled lignin nanospheres effectively extended the contact area between lignin and MXene to improve ion and electron accessibility,thus better utilizing the pseudocapacitive property of *** these strategies effectively enhanced the capacitive performance of the *** addition,HLNPs,which acted as a protective phase for MXene layer,enhanced mechanical properties of the wrinkled stretchable electrodes by releasing stress through slip and deformation during the stretch-release cycling and greatly improved the structural integrity and capacitive stability of the *** electrodes and symmetric flexible all-solid-state supercapacitors capable of enduring 600%uniaxial tensile strain were developed with high specific capacitances of 1273 mF cm^(−2)(241 F g^(−1))and 514 mF cm^(−2)(95 F g^(−1)),***,their capacitances were well preserved after 1000 times of 600%stretch-release *** study showcased new possibilities of incorporating biobased lignin nanospheres in energy storage devices to fabricate stretchable devices leveraging synergies among various two-dimensional nanomaterials.

关键词： Hollow lignin nanospheres MXene Gradient-layered architecture Wrinkled electrodes Stretchable supercapacitors

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An Unprecedented Efficiency with Approaching 21%Enabled by Additive‑Assisted Layer‑by‑Layer Processing in Organic Solar Cells

引用

Nano-Micro Letters 2025年第2期17卷 372-375页

作者： Shuai Xu Youdi Zhang Yanna Sun Pei Cheng Zhaoyang Yao Ning Li Long Ye Lijian Zuo Ke Gao Key Laboratory of Advanced Green Functional materials College of ChemistryChangchun Normal UniversityChangchun 130032People’s Republic of China Shandong Provincial Key Laboratory for science of Material Creation and Energy Conversion School of Chemistry and Chemical EngineeringShandong UniversityQingdao 266237People’s Republic of China college of Polymer science and Engineering Sichuan UniversityChengdu 610065People’s Republic of China State Key Laboratory and Institute of Elemento‑Organic chemistry Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer MaterialsRenewable Energy Conversion and Storage Center(RECAST)College of ChemistryNankai UniversityTianjin 300071People’s Republic of China Institute of Polymer Optoelectronic materials and Devices State Key Laboratory of Luminescent materials and Devices South China University of TechnologyGuangzhou 510640People’s Republic of China Tianjin Key Laboratory of Molecular Optoelectronic sciences School of Materials Science and EngineeringTianjin UniversityTianjin 300350People’s Republic of China State Key Laboratory of Silicon materials MOE Key Laboratory of Macromolecular Synthesis and FunctionalizationDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China

Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer *** optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture *** approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.

关键词： Organic solar cells Additive-assisted layer-by-layer processing Three-dimensional fibril morphology Bulk p-i-n structure Optical management

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Trinuclear gold-catalyzed site-selective alkylation of peptides

引用

science China chemistry 2025年第01期 249-256页

作者： Qing-Yun Fang Chengyihan Gu Yinghan Chen Wencheng Yan Yong Liang Weipeng Li Chengjian Zhu Jie Han Jin Xie State Key Laboratory of Coordination chemistry Jiangsu Key Laboratory of Advanced Organic Materials Chemistry and Biomedicine Innovation Center (Chem BIC) School of Chemistry and Chemical Engineering Nanjing University Green Catalysis Center College of Chemistry Zhengzhou University State Key Laboratory of Natural Medicines China Pharmaceutical University

Selective modification of peptides has always been a challenging issue. The selective alkylation of peptides can alter the biological activity and physical properties of molecules, and it has gained significant research interest. We herein disclose an intriguing gold-catalyzed alkylation of peptides using bench-stable unactivated alkyl bromides under photoredox catalysis. A wide range of structurally diverse primary, secondary and tertiary alkyl bromides serve as effective coupling partners to precisely connect with the α-C(sp3)–H in glycine residue of peptides. This protocol demonstrates an exceptionally broad scope for alkyl halides and excellent tolerance for a wide range of useful functional groups. A series of relay transformations to construct cyclic peptides, to proceed click reaction and to realize peptide fluorescence labeling further enhance its synthetic practicality. In addition, mechanistic studies and density functional theory(DFT) calculations reveal an inner-sphere and subsequent outersphere single electron transfer(SET) mechanism.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Role of iron ore in enhancing gasification of iron coke:Structural evolution,influence mechanism and kinetic analysis

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 58-69页

作者： Jie Wang Wei Wang Xuheng Chen Junfang Bao Qiuyue Hao Heng Zheng Runsheng Xu School of chemistry and materials science Hubei Engineering UniversityXiaogan 432000China Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081China Institue of Ironmaking Technology Baosteel Central Research InstituteShanghai 201999China State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

The utilization of iron coke provides a green pathway for low-carbon *** uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was ***,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric *** findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and *** provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron *** the heating rate in non-isothermal gasification can enhance the reactivity of iron *** metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon *** kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore ***,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.

关键词： low-carbon ironmaking iron coke gasification structural evolution kinetic model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：