检索结果-南通市图书馆

Topological non-reciprocal robust waveguide transport

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第5期67卷 39-45页

作者： Ruizhi Dong Yihuan Zhu Dongxing Mao Xu Wang Yong Li institute of acoustics Tongji UniversityShanghai 200092China

Devices that surpass the restriction of reciprocity of classical physical waves have brought intriguing possibilities for wave ***-reciprocal acoustic devices that rely on the viscosity of the medium or nonlinear effect have low efficiency and distortion problems respectively,and poor immunity to *** appearance of acoustic topological insulators achieves nonreciprocal transport with high ***,the local nature of topological states means that their appearance depends on a system with a larger *** is,most of the area of a topological device is occupied by useless lattices that do not directly contribute to non-reciprocal *** extra cost of topology protection severely limits the application scenarios of topology states,decreases the cost-effectiveness of topology devices,and is not conducive to device miniaturization and *** this work,we construct an acoustic three-layer heterojunction by introducing two types of domain walls into a conventional quantum Hall effect acoustic topological insulator,and successfully construct a non-reciprocal scattering network that forms topological modes spanning the interlayer *** extended states are still protected by bulk-band topology,making their non-reciprocity robust against *** structure flawlessly realizes the path broadening in a two-dimensional topological system and can accomplish functions such as non-reciprocal acoustic splitting and multichannel *** work opens up opportunities for developing topological-insulator-based non-reciprocal devices in acoustics.

关键词： reciprocal topological topology

Inverse design of nonlinear phononic crystal configurations based on multi-label classification learning neural networks

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第10期33卷 295-301页

作者： Kunqi Huang Yiran Lin Yun Lai Xiaozhou Liu Key Laboratory of Modern acoustics Institute of AcousticsNanjing UniversityNanjing 210093China School of Physics Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing 210093China State Key Laboratory of acoustics Institute of AcousticsChinese Academy of SciencesBeijing 100190China

Phononic crystals,as artificial composite materials,have sparked significant interest due to their novel characteristics that emerge upon the introduction of *** these properties,second-harmonic features exhibit potential applications in acoustic frequency conversion,non-reciprocal wave propagation,and non-destructive *** manipulating the harmonic band structure presents a major challenge in the design of nonlinear phononic *** design approaches based on parameter adjustments to meet specific application requirements are inefficient and often yield suboptimal ***,this paper develops a design methodology using Softmax logistic regression and multi-label classification learning to inversely design the material distribution of nonlinear phononic crystals by exploiting information from harmonic transmission *** results demonstrate that the neural network-based inverse design method can effectively tailor nonlinear phononic crystals with desired *** work establishes a mapping relationship between the band structure and the material distribution within phononic crystals,providing valuable insights into the inverse design of metamaterials.

关键词： multi-label classification learning nonlinear phononic crystals inverse design

Slicing capacity-centered mode selection and resource optimization for network-assisted full-duplex cell-free distributed massive MIMO systems

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第1期67卷 203-220页

作者： Jie WANG Jiamin LI Pengcheng ZHU Dongming WANG Hongbiao ZHANG Yue HAO Bin SHENG National Mobile Communications Research Laboratory Southeast University 2. Purple Mountain Laboratories China Mobile Research institute

Network-assisted full-duplex(NAFD) cell-free distributed massive multiple-input multipleoutput(MIMO) systems enable uplink(UL) and downlink(DL) communications within the same timefrequency resources,which potentially reduce latency by avoiding the overhead of switching UL/DL ***,how to choose UL/DL modes remains an important factor affecting system *** the dramatic increase in the number of users and access points(APs),massive access brings significant overhead in the mode ***,the different quality of service(QoS) among users also makes the effective utilization of resources *** one of the most promising technologies in sixth-generation(6G),network slicing enables the adaptive configuration of limited UL/DL resources through the resource isolation assisted NAFD ***,we propose a slicing capacity-centered *** this scheme,APs are motivated by slicing requirements and associated slices to form different *** mode selection and resource allocation are performed within each subsystem to reduce overhead and improve resource *** implement this scheme efficiently,a double-layer deep reinforcement learning(DRL)mechanism is used to realize the joint optimization of mode selection and resource *** results show that the slicing capacity-centered scheme can effectively improve resource utilization and reduce overhead.

关键词： network-assisted full-duplex network slicing mode selection resource optimization deep reinforcement learning

The higher-order topological pumping explored in the 2. acoustic crystal

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第2期67卷 127-133页

作者： Yanqiu Wang Bin Liang Jianchun Cheng Key Laboratory of Modern acoustics Ministry of EducationInstitute of AcousticsDepartment of PhysicsNanjing UniversityNanjing 210093China Collaborative Innovation Center of Advanced Microstructures Nanjing UniversityNanjing 210093China

The topological pumping has been instrumental in advancing our understanding of topological phase transitions in various physical systems,which can be extended to uncover intriguing higher-order topological phases in the lower-dimensional ***,we propose a theoretical exploration of topological dipole pumping on an acoustic square superlattice by cyclically modulating intracell couplings,which shares the topological nature of an extended three-dimensional system with chiral hinge *** the multipole chiral numbers,we characterize the higher-order topological phases that arise during the *** evolution of topological phase transitions is verified by numerical simulations and shows corner states are transferred across the *** findings can inspire the construction of chiral hinge states in artificial crystals,opening up new possibilities for the design of devices allowing the unidirectional propagation of sound.

关键词： topological phases of matter Thouless pumping acoustic metamaterial

A standing wave tube method for measuring acoustic and vibration characteristics of underwater acoustic materials

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of acoustics 2024年第3期43卷 348-362页

作者： LI Shui YI Yan MO Xiping LIU Yongping HE Tao TONG Haoyang Hangzhou Applied acoustics Research institute Hangzhou311400 institute of acoustics Chinese Academy of SciencesBeijing100190

A measurement method based on standing wave tube is proposed to get the acoustic and vibration characteristic parameters of underwater acoustic materials under hydrostatic pressure.A low-frequency emission transducer with pneumatic compensation is designed as the sound source for standing wave *** a water column,the planar piston vibration of the transducer is coupled to the sample under the water *** accelerometer is installed on the backing of the tested sample to measure the vibration velocity of the sample ***,a pair of hydrophones embedded in the tube wall is used to measure the sound pressure of the water *** on the measured data,the vibration velocity and sound pressure of the sample surface of incidence are *** vibration velocity transfer coefficient(decoupling coefficient)between the front and back surfaces of the sample,the input impedance,and the sound pressure reflection coefficient of the sample are then calculated.A low-frequency standing wave tube test system is constructed with a tube size of 300 mm inner diameter,600 mm outer diameter,and 3 m in height,with a frequency range of 100 Hz to 1000 *** experimental studies are conducted using water layer samples and multi-layer perforated rubber *** results show good agreement with the simulation data,thus validating the effectiveness of the measurement method.

关键词： surface method wave

Curved anisotropic polaritons

在线全文

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第3期19卷 217-224页

作者： Tao Hou Yixiao Ge Shuwen Xue Huanyang Chen Department of Physics and institute of Electromagnetics and acoustics Xiamen UniversityXiamen 361005China Jiujiang Research institute of Xiamen University Jiujiang 332000China

The curved surface has emerged as new research platform for understanding and manipulating novel electromagnetic behaviors in complex media. In this paper, we explore the anisotropic polaritons on the spherical surface based on Maxwell’s fish-eye metric through stereographic projection. Additionally, this phenomenon can be extended to spindle surface by conformal mapping. Our calculations and simulations demonstrate the elliptic and hyperbolic polaritons, excited by an electric dipole on the sphere, will self-focus or focus on the poles on the sphere affected by anisotropic permittivity. Furthermore, we reveal the optical singularity nature of the curved hyperbolic polaritons from the perspective of transformation optics by obtaining the equivalent optical refractive index profiles and the particle potential energy. Based on natural anisotropic materials and metamaterials, the curved polaritons have potential applications in curved surface focusing and chaos regulation. This work not only bridges the transformation optics and anisotropic polaritons at curved surface, but also provides a new route to surface optical field manipulation.

关键词： anisotropic polaritons transformation optics curved surface

Hard yet tough and self-lubricating(CuNiTiNbCr)C_(x) high-entropy nanocomposite films:Effects of carbon content on structure and properties

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第6期173卷 20-30页

作者： Y.T.Li X.M.Chen X.K.Zeng M.Liu X.Jiang Y.X.Leng Key Laboratory of Advanced Technologies of Materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China Key Laboratory of Noise and Vibration Research Institute of AcousticsChinese Academy of SciencesBeijing 100190China State Key Laboratory of acoustics Institute of AcousticsChinese Academy of SciencesBeijing 100190China School of Mechanical and Electrical Engineering Mianyang Teachers’CollegeMianyang 621000China

The single-phase high-entropy alloy film is difficult to meet severe friction conditions due to its low hardness and high friction ***-composite structure film is composed of at least two separated phases,showing the properties of strength and toughness integration and excellent wear *** design of nanocomposite structures can effectively improve the mechanical properties and tribological properties of high-entropy alloy *** this study,the(CuNiTiNbCr)C_(x) nanocomposite high-entropy films(HEFs)integrated with high hardness,high toughness,and self-lubrication were synthesized by the double-target co-sputtering *** effect of carbon content on microstructure,mechanical properties,and tribological properties of(CuNiTiNbCr)C_(x) films was *** the increase of carbon content in the HEFs,the carbon atoms preferentially react with Ti,Nb,and Cr to form a(TiNbCr)C ceramic-reinforced phase,and then the excess carbon atoms precipitate in the form of amorphous carbon(a-C)lubricating phase in the *** structure of the HEFs changes from an amorphous structure to a nanocomposite structure of amorphous(amorphous CuNiTiNbCr phase+a-C phase)/nanocrystalline(TiN-bCr)C *** the carbon content is about 2..2.at.%,the carbide phase in the film reaches saturation and the hardness and modulus of the films are highest,which are 18 GPa and 2.8 GPa,*** HEFs with a carbon content of 44.0 at.%show the best toughness and tribological properties with a friction coefficient of 0.16 and a wear rate of 2.4×10^(-6) mm^(3)/(N m),which is mainly attributed to the excellent resistance to fatigue crack growth and the interfacial lubricating layer formed in the friction *** nanocomposite(CuNiTiNbCr)C_(x) HEFs show very promising application prospect in the field of friction protection.

关键词： High-entropy films Nanocomposite Double-target co-sputtering Strengthening-toughening Tribological properties

Robust Space-Time Adaptive Track-Before-Detect Algorithm Based on Persymmetry and Symmetric Spectrum

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Beijing institute of Technology 2024年第1期33卷 65-74页

作者： Xiaojing Su Da Xu Dongsheng Zhu Zhixun Ma institute of acoustics Chinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100049China

Underwater monopulse space-time adaptive track-before-detect method,which combines space-time adaptive detector(STAD)and the track-before-detect algorithm based on dynamic programming(DP-TBD),denoted as STAD-DP-TBD,can effectively detect low-speed weak ***,due to the complexity and variability of the underwater environment,it is difficult to obtain sufficient secondary data,resulting in a serious decline in the detection and tracking performance,and leading to poor robustness of the *** this paper,based on the adaptive matched filter(AMF)test and the RAO test,underwater monopulse AMF-DP-TBD algorithm and RAO-DP-TBD algorithm which incorporate persymmetry and symmetric spectrum,denoted as PSAMF-DP-TBD and PS-RAO-DP-TBD,are proposed and compared with the AMF-DP-TBD algorithm and RAO-DP-TBD algorithm based on persymmetry array,denoted as P-AMF-DP-TBD and *** simulation results show that the four methods can work normally with sufficient secondary data and slightly insufficient secondary data,but when the secondary data is severely insufficient,the P-AMF-DP-TBD and P-RAO-DP-TBD algorithms has failed while the PSAMF-DP-TBD and PS-RAO-DP-TBD algorithms still have good detection and tracking capabilities.

关键词： space-time adaptive detection track before detect robustness persymmetric property symmetric spectrum AMF test RAO test

Pipeline thickness estimation using the dispersion of higher-order SH guided waves

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第7期33卷 389-396页

作者：代政辰刘金霞龙云飞张建海 Tribikram Kundu 崔志文 Department of acoustics and Microwave Physics College of PhysicsJilin UniversityChangchun 130012China School of Mechanical and Aerospace Engineering Jilin UniversityChangchun 130025China Department of Civil and Architectural Engineering and Mechanics University of ArizonaTucsonArizona 85721USA College of Aerospace and Mechanical Engineering University of ArizonaTucsonAZ 85721USA State Key Laboratory of acoustics Institute of AcousticsChinese Academy of SciencesBeijing 100190China

Thickness measurement plays an important role in the monitoring of pipeline corrosion damage. However, the requirement for prior knowledge of the shear wave velocity in the pipeline material for popular ultrasonic thickness measurement limits its widespread application. This paper proposes a method that utilizes cylindrical shear horizontal(SH) guided waves to estimate pipeline thickness without prior knowledge of shear wave velocity. The inversion formulas are derived from the dispersion of higher-order modes with the high-frequency approximation. The waveform of the example problems is simulated using the real-axis integral method. The data points on the dispersion curves are processed in the frequency domain using the wave-number method. These extracted data are then substituted into the derived formulas. The results verify that employing higher-order SH guided waves for the evaluation of thickness and shear wave velocity yields less than1% error. This method can be applied to both metallic and non-metallic pipelines, thus opening new possibilities for health monitoring of pipeline structures.

关键词： pipeline wall thickness higher-order modes SH guided waves dispersion