检索结果-南通市图书馆

Sustainable, thermoplastic and hydrophobic coating from natural cellulose and cinnamon to fabricate eco-friendly catering packaging

引用

Green Energy & Environment 2024年第5期9卷 927-936页

作者： Rumeng Xu Chunchun Yin Jingxuan You Jinming Zhang Qinyong Mi Jin Wu Jun Zhang cas {1. laboratory of engineering plastics Institute of ChemistryChinese Academy of Sciences(CAS)Beijing100190China University of Chinese Academy of Sciences Beijing100049China

Non-degradable polymers cause serious environmental pollution problem,such as the widely-used while unrecyclable coatings which signiﬁcantly affect the overall degradation performance of *** is imperative and attractive to develop biodegradable functional ***,we proposed a novel strategy to successfully prepare biodegradable,thermoplastic and hydrophobic coatings with high transparence and biosafety by weakening the interchain interactions between cellulose *** natural cellulose and cinnamic acid were as raw *** reducing the degree of polymerization(DP)of cellulose and regulating the degree of substitution(DS)of cinnamate moiety,the obtained cellulose cinnamate(CC)exhibited not only the thermalﬂow behavior but also good biodegradability,which solves the conﬂict between the thermoplasticity and biodegradability in cellulose-based *** glass transition temperature(T_(g))and thermalﬂow temperature(T_(f))of the CC could be adjusted in a range of 1.0–200℃ and 1.0–21.℃,*** CC with DS1.2 and DP≤1.0 degraded more than 60%after an enzyme treatment for 7 days,and degraded more than 80%after a composting treatment for 42 ***,CC had no toxicity to human epidermal cells even at a high concentration(0.5 mg mL^(-1.).In addition,CC could be easily fabricated into multifunctional coating with high hydrophobicity,thermal adhesion and high ***,after combining with cellophane and paperboard,CC coating with low DP and DS could be used to prepare fully-biodegradable heat-sealing packaging,art paper,paper cups,paper straws and food packaging boxes.

关键词： Thermoplastic coating Bio-degradable adhesive Natural products Cellulose Eco-friendly packaging

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on the tribological properties of metal rolling bearing under lubrication with diketone lubricants

引用

Science China(Technological Sciences) 2024年第7期67卷 2003-2017页

作者： DU ShaoNan ZHANG ChenHui LUO Zhi State key {1. of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China Beijing National laboratory of Molecular Sciences CAS Key Laboratory of Engineering PlasticsInstitute of ChemistryChinese Academy of SciencesBeijing 100190China

In this article, 1.(4-ethylphenyl)-nonane-1.3-dione(0206) was prepared by Claisen condensation. By mixing 0206, chelate, and base oil in a ratio of 3.2:4.8:2, a diketone lubricant(PAO=1.(20%)) that can achieve superlubricity was prepared and applied to bearing lubrication experiments. The experimental results show that when the bearing was lubricated by base oil, the friction coefficient(COF) and temperature rise decreased with the decrease of the viscosity of PAO. When PAO=1.(20%) was used as the lubricant, the COF of the bearing was the lowest(0.001., and the wear morphology was comparable to that of the bearing lubricated with commercial lubricant. Compared with the base oil with the same viscosity, it is found that the COF and temperature rise of the bearing lubricated by PAO=1.(20%) were lower under any experimental conditions. And when the amount of lubricant added was 1. μL, the COF of the bearing lubricated by PAO=1.(20%) reached a very low value(0.0004).Bearing ball surface analysis identified the formation of diketone adsorption films. Combined with the previous PAO=1.(20%)superlubricity mechanism, it was considered that the occurrence of tribochemical reaction and the bearing effect of chelates were the main reasons for the existence of ultra-low friction coefficient and low wear. In addition, when there were polar molecules in the lubricant, they were adsorbed on the metal surface through tribochemical reactions, resulting in many irregular pits on the surface.

关键词： superlubricity diketone chelate tribochemical recations bearing lubrication

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Combination of diketone and PAO to achieve macroscale oil-based superlubricity at relative high contact pressures

引用

Friction 2024年第5期12卷 869-883页

作者： Shaonan DU Chenhui ZHANG Zhi LUO State key {1. of Tribology in Advanced Equipment Tsinghua UniversityBeijing100084China Beijing National laboratory of Molecular Sciences CAS Key Laboratory of Engineering PlasticsInstitute of ChemistryChinese Academy of SciencesBeijing100190China

1.(4-ethylphenyl)-nonane-1.3-dione(0206)is an oil-soluble liquid molecule with rod-like *** this study,the chelate(0206-Fe)with octahedral structure was prepared by the reaction of ferric chloride and 1.*** experimental results show that when using 0206 and a mixed solution containing 60%0206-Fe and 40%0206(0206-Fe(60%))as lubricants of the steel friction pairs,superlubricity can be achieved(0.007,0.006).But their wear scar diameters(WSD)were very large(532µm,370µm),which resulted in the pressure of only 44.3 and 61.8 MPa in the contact areas of the friction *** 0206-Fe(60%)was mixed with PAO6,it was found that the friction coefficient(COF)decreased with increase of 0206-Fe(60%)in the *** the ratio of 0206-Fe(60%)to PAO6 was 8:2(PAO6(20%)),it exhibited better comprehensive tribological properties(232.3 MPa).Subsequent studies have shown that reducing the viscosity of the base oil in the mixed solution helped to reduce COF and increased *** the COF,contact pressure,and running-in time,it was found that the mixed lubricant(Oil3(20%))prepared by the base oil with a viscosity of 1..7 mPa·s(Oil3)and 0206-Fe(60%)exhibited the best tribological properties(0.007,1.1.4 MPa,3,1.0 s).

关键词： diketone oil-based lubricants chelate superlubricity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Impact of Annealing on the Melt Recrystallization of a-PDLA/α-PLLA Double-layered Films

引用

Chinese Journal of Polymer Science 2024年第2期42卷 230-238,I0009页

作者： Yun-Peng Li Hao-Ran Shen Shao-Juan Wang Hao Zhang Jian Hu Rui Xin Xiao-Li Sun Shou-Ke Yan key {1. of Rubber-plastics Ministry of Education/Shandong Provincial Key Laboratory of Rubber-plasticsQingdao University of Science&TechnologyQingdao266042China State key {1. of Chemical Resource engineering Beijing University of Chemical TechnologyBeijing100029China

Poly(lactic acid)(PLA) as a bio-based polymer with biodegradability and biocompatibility has attracted much attention. To manipulate its properties for different applications, regulation of crystal structure and crystalline morphology becomes an attractive research topic. In this work, the structure evolution of layered samples containing an amorphous poly(D-lactide)(PDLA) layer and a crystalline poly(L-lactide)(PLLA)layer with highly oriented edge-on α lamellar crystals after annealing at 1.0 ℃ or/and after melt-recrystallization has been studied by AFM, FTIR,and TEM combined with electron diffraction. The results demonstrate that melt recrystallization of the as-prepared sample leads to the formation of abundant randomly oriented PLA stereo-complex(PLA SC) crystals. Annealing at 1.0 ℃ results in the formation of a small amount of oriented PLA SC crystals at the interface. These PLA SC crystals show great impact on the recrystallization behavior of sample after melting at 1.0 ℃ and then crystallizing at 90 ℃. First, they impede the mutual diffusion of the overlying PDLA and underlying PLLA, and thus reduce their stereocomplexation ability as manifested by the decreased amount of PLA SC crystals. Second, they act as substrate to initiate the epitaxial crystallization of the overlying PDLA and underlying PLLA, which ensures the production of a highly oriented structure of PDLA and PLLA after melt recrystallization again.

关键词： Poly(L-lactide) Poly(D-lactide) Double layer Stereocomplex

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Special Issue: Functional Polymer Materials

引用

Chinese Journal of Polymer Science 2024年第7期42卷 895-896,I0004页

作者： Jun-Wei Gu Du-Jin Wang Shaanxi key {1. of Macromolecular Science and Technology School of Chemistry and Chemical Engineering Northwestern Polytechnical University Xi’an 710072 China Beijing National laboratory for Molecular Sciences CAS Key Laboratory of Engineering Plastics Institute of Chemistry Chinese Academy of Sciences Beijing 100190 China

The rapid development of science has led to a significant role for polymer materials in multitude fields,including industry,medicine,energy,and the environment,*** a leading academic journal in the field of polymer,Chinese Journal of Polymer Science has been dedicated to fostering the advancement and utilization of polymer science.

关键词： polymer Polymer Functional

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

MOF-derived Se doped MnS/Ti_(3)C_(2)T_(x) as cathode and Zn-Ti_(3)C_(2)T_(x) membrane as anode for rocking-chair zinc-ion battery

引用

Nano Research 2024年第4期17卷 2781-2789页

作者： Kaisheng Sun Zemao Xiao Yunfei Shen Heng Lv Jianpeng Zhu Jianxiang Pang Yang Zheng Wenwen Kong Long Chen School of Chemistry and Chemical engineering/State {1. laboratory Incubation Base for Green Processing of Chemical engineering Shihezi UniversityShihezi 832003China cas {1. laboratory of Functional Materials and Devices for Special Environments Xinjiang Key Laboratory of Electronic Information Materials and DevicesCenter of Materials Science and Optoelectronics EngineeringXinjiang Technical Institute of Physics and Chemistry of CASUrumqi 830011China

Mn-based zinc ion battery has the advantages of low cost and high performance,which makes it the promising energy storage ***,the poor conductivity and the agglomeration in the synthesis process of manganese-based materials restrict the performance of ***,the Se-doped MnS/Ti_(3)C_(2)T_(x)(Se-MnS/Ti_(3)C_(2)T_(x))composite material derived from Mn-based metal-organic framework is *** tests show that Se-doped could generate S defects and enhance the electrochemical activity of *** the same time,the introduction of Ti_(3)C_(2)T_(x) substrate is conducive to exposing more sulfur defects and improving the utilization rate of *** the mechanism study,it is found that Se-MnS/Ti_(3)C_(2)T_(x) is transformed into S/Se co-doped Mn3O_(4) at the first charge,which innovatively elucidated the behavior of S/Se during *** the electrochemical performance test,the specific capacity can reach 74.7 mAh·g^(-1. at 5.0 A·g^(-1..In addition,the Zn-Ti_(3)C_(2)T_(x) membrane electrode is prepared by vacuum filtration as the zinc-poor anode,which is assembled into the rocking chair full battery to avoid dendrite growth and exhibit excellent rate *** addition of Zn2+weakens the electrostatic repulsion between the interlayers of MXene,and the formation of the folded morphology aids the penetration of the *** 1.0 A·g^(-1.,the capacity can reach 50.6 mAh·g^(-1..This work is helpful to promote the research and development of the reaction mechanism of manganese based rocking chair batteries.

关键词： rocking-chair zinc-ion battery MnS Zn-Ti_(3)C_(2)T_(x) membrane Se doped Ti_(3)C_(2)T_(x) composite

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Selective cyclohexane oxidation enhancement by electronic structures regulation of metal-poly(ionic liquid)s

引用

Green Chemical engineering 2024年第2期5卷 213-221页

作者： Ying Jin Shengxin Chen Ruirui Wang Yumei Liu Xinxin Li Yingwei Li Ruirui Zhang Ruixia Liu Henan Institute of Advanced Technology Zhengzhou UniversityZhengzhou450001China Beijing key {1. of Ionic Liquids Clean Process CAS Key Laboratory of Green Process and EngineeringState Key Laboratory of Multiphase Complex SystemsInstitute of Process EngineeringInnovation Academy for Green ManufactureCASBeijing100190China

Poly(ionic liquids)(PILs)combined with the macromolecular structure and unique properties of ionic liquids show unlimited potential in *** this work,a series of metal-based PIL with different ionic ratios were prepared for the selective oxidation of *** analysis reveals that different degrees of ionization could adjust the Co-N sites of the catalysts efficiently,leading to significant changes in their electronic structure,which strongly relate to catalytic performance in oxidation.20.07%cyclohexane conversion and 1..06%cyclohexanone and cyclohexanol(KA oil)yield can be achieved by metal-based PILs that are better than other commercial *** with CoCl_(2),metal-based PILs perform well,with superior conversion and KA oil *** interestingly,the catalyst created in this study features a malleable Co-N site,which may potentially have an impact on how oxygen species adsorb and desorb from the ***,the catalyst studied in this work is used as molecular oxygen for the selective oxidation of cyclohexane to produce KA oil,and its application prospect is promising.

关键词： Metal-PILs Cyclohexane oxidation C-H activation Co-N sites

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Role of methoxy and C_(α)-based substituents in electrochemical oxidation mechanisms and bond cleavage selectivity of β-O-4 lignin model compounds

引用

Green Energy & Environment 2024年第1期9卷 114-125页

作者： Yang Zhou Qiang Zeng Hongyan He Kejia Wu Fuqiao Liu Xuehui Li School of Chemistry and Chemical engineering The Guangdong Provincial Key Laboratory of Green Chemical Product TechnologyState Key Laboratory of Pulp and Paper EngineeringSouth China University of TechnologyGuangzhouGuangdong510640China cas {1. laboratory of Green Process and engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China

In order to better understand the specific substituent effects on the electrochemical oxidation process of β-O-4 bond, a series of methoxyphenyl type β-O-4 dimer model compounds with different localized methoxyl groups, including 2-(2-methoxyphenoxy)-1.phenylethanone, 2-(2-methoxyphenoxy)-1.phenylethanol, 2-(2-methoxyphenoxy)-1.(4-methoxyphenyl)ethanone, 2-(2-methoxyphenoxy)-1.(4-methoxyphenyl)ethanol, 2-(2,6-dimethoxyphenoxy)-1.(4-methoxyphenyl)ethanone, 2-(2,6-dimethoxyphenoxy)-1.(4-methoxyphenyl)ethanol have been selected and their electrochemical properties have been studied experimentally by cyclic voltammetry, and FT-IR spectroelectrochemistry. Combining with electrolysis products distribution analysis and density functional theory calculations, oxidation mechanisms of all six model dimers have been explored. In particular, a total effect from substituents of both para-methoxy(on the aryl ring closing to Cα) and Cα-OH on the oxidation mechanisms has been clearly observed, showing a significant selectivity on the Cα-Cβbond cleavage induced by electrochemical oxidations.

关键词： Lignin model compounds β-O-4 dimers Electrochemical oxidation Oxidation mechanisms Substituent effect

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advanced 3D ordered electrodes for PEMFC applications: From structural features and fabrication methods to the controllable design of catalyst layers

引用

Green Energy & Environment 2024年第9期9卷 1336-1365页

作者： Kaili Wang Tingting Zhou Zhen Cao Zhimin Yuan Hongyan He Maohong Fan Zaiyong Jiang School of Chemistry & Chemical engineering and Environmental engineering Weifang University Beijing key {1. of Ionic Liquids Clean Process State Key Laboratory of Multiphase Complex Systems CAS Key Laboratory of Green Process and Engineering Institute of Process Engineering Chinese Academy of Sciences College engineering and Physical Sciences and School of Energy Resources University of Wyoming

The catalyst layers(CLs) electrode is the key component of the membrane electrode assembly(MEA) in proton exchange membrane fuel cells(PEMFCs). Conventional electrodes for PEMFCs are composed of carbon-supported, ionomer, and Pt nanoparticles, all immersed together and sprayed with a micron-level thickness of CLs. They have a performance trade-off where increasing the Pt loading leads to higher performance of abundant triple-phase boundary areas but increases the electrode cost. Major challenges must be overcome before realizing its wide commercialization. Literature research revealed that it is impossible to achieve performance and durability targets with only high-performance catalysts, so the controllable design of CLs architecture in MEAs for PEMFCs must now be the top priority to meet industry goals. From this perspective, a 3D ordered electrode circumvents this issue with a support-free architecture and ultrathin thickness while reducing noble metal Pt loadings. Herein, we discuss the motivation in-depth and summarize the necessary CLs structural features for designing ultralow Pt loading electrodes. Critical issues that remain in progress for 3D ordered CLs must be studied and characterized. Furthermore, approaches for 3D ordered CLs architecture electrode development, involving material design, structure optimization, preparation technology, and characterization techniques, are summarized and are expected to be next-generation CLs for PEMFCs. Finally, the review concludes with perspectives on possible research directions of CL architecture to address the significant challenges in the future.

关键词： PEMFC 3D ordered electrode Structural features Preparation technology Ultralow Pt loading

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of multifunctional lanthanum manganese mixed nanoparticles mediated by ionic liquids for selective aerobic oxidation of cyclohexane

引用

Rare Metals 2024年第5期43卷 2205-2221页

作者： Hao Li Rui-Rui Zhang Ke-Xin Li Shuang Wei Yu-Mei Liu Rui-Xia Liu Beijing key {1. of Ionic Liquids Clean Process CAS Key Laboratory of Green Process and EngineeringState Key Laboratory of Multiphase Complex SystemsInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100049China

Selective oxidation of alkanes to produce highvalue chemicals is an essential strategy and means to realize efficient utilization of *** this work,a strategy of lanthanum manganese mixed metal oxides(LMMO)regulated via a facile ionic liquid(IL)-assisted hydrothermal method was proposed to construct the multifunctional catalysts,which exhibited excellent catalytic performance in the selective aerobic oxidation of *** 8.9%cyclohexane conversion with 90%KA oi(cyclohexanol and cyclohexanone)selectivity was achieved over the optimal LMMO catalyst under mild *** effects of anion type,carbon chain length and concentration of ILs on the structure and properties of catalysts were investigated through various characterizations,indicating the structure-directing and template effect of ILs on the multifunctional *** formation of self-assembled spherical nanoparticles followed the"dissolution-nucleation-proliferation"mechanism with the introduction of 1.butyl-3-methylimidazolium hydrogen sulfate,ascribing the synergistic effect between the microenvironment of ILs and the hydrothermal ***,the high reactive oxygen concentration redox capacity,and suitable basic sites of LMMO catalysts mediated by ILs enhance the activation of C-H bonds and molecular oxygen,simultaneously influencing the adsorption and desorption of the substrate.A comprehensive understanding of the high KA oil selectivity and radical reaction mechanism was elucidated based on in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and radical trapping *** recycling and regeneration experiments further illuminated that the removal of adsorbed cyclohexanone acting on the LMMO catalyst was the key to achieve high KA oil selectivity.

关键词： Ionic liquids Nanoparticle Multifunctional catalyst Cyclohexane oxidation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：