检索结果-南通市图书馆

DEM simulations of die filling during pharmaceutical tabletting

Particuology 2008年第6期6卷 412-418页

作者： Chuan-Yu Wu School of Chemical Engineering University of Birmingham Edgbaston Birmingham B15 2TT UK

The flow behaviour of powders from a stationary shoe into a moving die, which mimics the die filling process in a rotary tablet press, was analysed using a discrete element method （DEM）, in which 2D irregular shaped particles were considered. The influence of the particle shape, size and size distribution, the number of particles used in the simulation, the initial height of powder bed in the shoe, and the filling speed on the average mass flow rate and the critical filling speed （the highest speed at which the die can be completely filled） were explored. It has been found that a maximum flow rate is obtained at the critical filling speed for all systems investigated and poly-disperse systems have higher mass flow rates and higher critical filling speeds than mono-disperse systems. In addition, the powder with particles which can tessellate generally has a lower filling rate and a lower critical titling speed.

关键词： DEM Die filling tabletting Powder compaction Mass flow rate Critical filling speed

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

tabletting Characteristics of the Selected Malaysian Herbs

引用

Journal of Food Science and Engineering 2013年第5期3卷 255-266页

作者： Yus Aniza Yusof Chin Nyuk Ling Mohd Shamsul Anuar Sobah Ahmad Rohaiza Abdullah Che Rodiziah Md Nor Mohammad Gulzarul Aziz Department of Process and Food Engineering Faculty of Engineering Universiti Putra Malaysia 43400 UPM Serdang SelangorMalaysia Department of Food Technology and Rural Industries Bangladesh Agricultural University Mymensingh Bangladesh

This work describes a study of tabletting of selected Malaysian herbs such as Eurycoma longifolia Jack, Ficus deltoidea and Morinda citrifolia. These herbs are famous for their therapeutic properties and are used as herbal medicine or as medicinal food. A cylindrical uniaxial die of 13 mm was used to compress the herb powders into tablets. Pressures ranging from 7.5 MPa to 75 MPa were applied using a universal testing machine. Two feed weights, 0.5 g and 1.0 g, were used to produce the tablets. A binder, the microcrystalline cellulose known as Avicel, was used to investigate its effect on tabletting. Properties associated with both the binder and the compounds were studied, and binary mixtures with compositions ranging from 10% to 60% were examined. The strength of the herb tablets was then tested using an indirect tensile strength test. Upon compression, the Morinda citrifolia powder showed the highest density compared to that of Avicel. However, due to its high elasticity, the tensile strength of the Morinda citrifolia tablet was the lowest. The experimental data were also verified using an established model for compression property development. The results indicated that this simple approach can be used to understand the tabletting characteristics of these herbs.

关键词： Eurycoma longifolia Jack Ficus deltoidea Morinda citrifolia tabletting tensile strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Compaction analysis and optimisation of convex-faced pharmaceutical tablets using numerical techniques

引用

Particuology 2019年第6期17卷 10-21页

作者： Ahmad Baroutaji Sandra Lenihan Keith Bryan School of Engineering Faculty of Science and EngineeringUniversity of WolverhamptonTelfordUK School of Mechanical Electrical and Process EngineeringCork Institute of TechnologyCorkIreland

Capping failure,edge chipping,and non-uniform mechanical properties of convex-faced pharmaceutical tablets are common problems in the pharma *** this paper,the finite element method(FEM)and design of experiment techniques are used to determine the optimal shape of convex-faced(CF)pharmaceutical tablet which has more uniform mechanical properties and less capping and chipping *** effects of different geometrical parameters and friction on the compaction responses of convex-faced pharmaceutical tablets were first identified and *** FEM model of the tabletting process was generated using the implicit code ABAQUS and validated against experimental *** surface methodology was used to establish the relationship between the design variables,represented by the geometrical parameters and friction coefficient,and compaction responses of interest including residual die pressure,relative density variation within a tablet,and relative shear stress at the edge of a tablet.A statistical-based optimisation approach was then used to optimise the shape of CF *** obtained results demonstrated how the geometrical parameters and friction coefficient of CF pharmaceutical tablets strongly affect their compaction behaviour and quality.

关键词： Capping failure Edge chipping tabletting FEM Optimisation Residual radial pressure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：