检索结果-南通市图书馆

Examining the effect of the aging state on strength and plasticity of wrought aluminum alloys

Journal of Materials Science & Technology 2022年第27期122卷 54-67页

作者： Z.Qu Z.J.Zhang J.X.Yan P.Zhang B.S.Gong S.L.Lu Z.F.Zhang T.G.Langdon Shi-Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Department of Mechanical Engineering University of SouthamptonSouthampton SO171BJUnited Kingdom

A general rule of strength and plasticity was proposed for three typical wrought Al alloys(2xxx,6xxx,and 7xxx)subjected to different aging times.Investigations of the work-hardening processes and dislocation configurations in tensile and compressive testing reveal that this general rule arises because there is a common mechanism for these three kinds of wrought alloys whereby the tendency for cross-slip increases monotonously with aging time.By analyzing the strain hardening exponent and the stacking fault energy,it is demonstrated that the change in the dislocation slip mode is attributed mainly to the formation of second phases rather than to the matrix composition.Accordingly,a new work-hardening model was proposed for wrought Al alloys containing second phases and this explains the interaction between dislocations and second phases and other relevant experimental phenomena.This work is therefore beneficial for quantitatively investigating and optimizing the strength and plasticity of wrought aluminum alloys.

关键词： Wrought aluminum alloy strength and plasticity Work hardening Dislocation slip mode Second phase

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin Lu Beijing Advanced Innovation Center for Materials Genome Engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National Engineering Research Center for Advanced Rolling Technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying alloys.In this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot rolling.The microstructure and mechanical properties under different process paramet-ers were investigated.Optical microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening mechanism.The results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering temperature.The block was hot rolled at 1200℃ with an 80%reduction under only two passes without annealing.The strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain boundaries.After hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Relationship Between Oxidation and Thermal Fatigue of Martensitic Hot-Work Die Steels

引用

Acta Metallurgica Sinica(English Letters) 2018年第7期31卷 692-698页

作者： Qi-Chuan Jiang Xu-Min Zhao Feng Qiu Tian-Ning Ma Qing-Long Zhao Key Laboratory of Automobile Materials Ministry of Education College of Materials Science and EngineeringJilin University Jiangsu Jin Gang Special Steel Co. Ltd

Thermal fatigue behaviors of two forged hot-work die steels subjected to cyclic heating （650 ℃）-water quenching were investigated. A martensitic hot-work die steel containing 10% Cr （HHD）, showing superior oxidation resistance and thermal fatigue resistance to the commercial martensitic hot-work die steel （Uddeholm DIEVAR ）, was developed. The maximal crack length in HHD was 35% shorter than that in DIEVAR after 2000 thermal cycles, and the hot yield strength at 650℃ of HHD was 14% lower than that of DIEVAR prior to thermal fatigue testing, which is 30% higher after 1500 cycles. It is found that cracks initiated and propagated along the oxide layers in the grain boundaries, suggesting that the oxidation-induced thermal fatigue cracks can significantly reduce the mechanical performance and service life for the hot- work die steel. High-temperature oxidation behavior is crucial for thermal fatigue crack formation, while high-temperature yield strength and ductility play a less important role.

关键词： High-temperature oxidation Crack initiation and propagation strength and plasticity Thermal fatigueresistance Tool steel

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：