检索结果-南通市图书馆

Microstructure characteristics and solidification behavior of wrought aluminum alloy 2024 rheo-diecast with self-inoculation method

在线全文

学校读者我要写书评

暂无评论

China Foundry 2012年第4期9卷 328-336页

作者： Li Yanlei Li Yuandong Li Chun Wu Huihui State Key Laboratory of Gansu Advanced Nonferrous Metal Materials Lanzhou University of TechnologyLanzhou 730050China Key Laboratory of Nonferrous Metal Alloys and Processing Ministry of EducationLanzhou University of TechnologyLanzhou 730050China

One important problem in casting wrought aluminum alloys is the high tendency to the formation of hot tears in the solidification *** using semi-solid metal(SSM) processing,the hot tearing tendency of alloys can be minimized during *** the present research,the semi-solid slurry of wrought aluminum alloy 2024 was firstly prepared with a novel self-inoculation method(SIM),and then the microstructure characteristics of the semi-solid slurry and the rheo-diecastings cast with the semi-solid slurry were *** results indicate that finer and more uniform globular primary α-Al particles can be obtained when the semi-solid slurry are isothermally held for a short period within the semi-solid temperature range,and the primary α-Al particles without entrapped liquid are uniformly fine,globular grains in the *** holding temperature and time affect the solid fraction,particle size,and shape *** the semi-solid slurry is held at 625 ℃ for 3 min and 5 min,the optimal values for the average equivalent diameter are 70.80 μm and 74.15 μm,and for the shape factor are 1.32 and 1.42,*** solidification process of the rheo-diecastings is composed of the following two distinct stages:primary solidification process and secondary solidification *** secondary solidification process consists further of the following three stages:(1) direct growth of secondary primary(α 2) phase from the surface of the primary α-Al phase particles without re-nucleation,(2) independent nucleation and growth of α 3 phase from the residual liquid,and(3) eutectic reaction at the end.

关键词： self-inoculation method wrought aluminum alloy 2024 solidification behavior secondary solidification

solidification behavior and rheo-diecasting microstructure of A356 aluminum alloy prepared by self-inoculation method

在线全文

学校读者我要写书评

暂无评论

China Foundry 2017年第1期14卷 1-9页

作者： Ming Li Yuan-dong Li Xiao-feng Huang Chi Cao Ying Ma State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of TechnologyLanzhou 730050China Key Laboratory of Non-ferrous Metal Alloys and Processing Ministry of EducationLanzhou University of TechnologyLanzhou 730050China

Semisolid slurry of A356 aluminum alloy was prepared by self-inoculation method, and the microstructure and solidification behavior during rheo-diecasting process were investigated. The results indicate that the semisolid slurry of A356 aluminum alloy can be prepared by self-inoculation method at 600℃. Primary a-AI particles with fine and spherical morphologies are uniformly distributed when the isothermal holding time of slurry is 3 min. Liquid phase segregation occurs during rheo-diecasting process of semisolid slurry and the primary particles （α1） show obvious plastic deformation in the area of high stress and low cooling rate. A small amount of dendrites resulting from the relatively low temperature of the shot chamber at the initial stage of secondary solidification are fragmented as they pass through the in-gate during the mould filling process. The amount of dendrite fragments decreases with the increase of filling distance. During the solidification process of the remaining liquid, the nucleation rate of secondary particles （α2） increases with the increase of cooling rate, and the content of Si in secondary particles （α2） are larger than primary particles （α1）. With the increase of cooling rate, the content of Si in secondary particles （α2） gradually increases. The morphologies of eutectic Si in different parts of die casting are noticeably different. The low cooling rate in the first filling positions leads to coarse eutectic structures, while the high cooling rate in the post filling positions promotes small and compact eutectic structures.

关键词： semisolid self-inoculation method secondary solidification dendrite fragments primary particles eutectic structure

Effects of melt treatment temperature and isothermal holding parameter on water-quenched microstructures of A356 aluminum alloy semisolid slurry

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2018年第3期28卷 393-403页

作者： Ming LI Yuan-dong LI Guang-li BI Xiao-feng HUANG Ti-jun CHEN Ying MA State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of TechnologyLanzhou 730050China Key Laboratory of Nonferrous Metal Alloys and Processing Ministry of EducationLanzhou University of TechnologyLanzhou 730050China

The semisolid slurry of the A356 aluminum alloy was prepared by self-inoculation method(SIM),the effects of melt treatment temperatures and isothermal holding parameters on water-quenched microstructures of A356 aluminum alloy semisolid slurry were investigated,and the solidification behavior of the remaining liquid phase(secondary solidification)was *** results indicate that the melt treatment temperature has significant effects on the final semisolid *** semisolid slurry which is suitable for the rheological forming can be produced when the melt treatment temperature is between 680 and 690°*** the isothermal holding process,the growth rate of the primary particles conforms to the dynamic equation of Dt 3-Do3=Kt,and the coarsening rate of the primary particles is the fastest when the isothermal holding temperature is 600°***,the isothermal holding time also has obvious effect on the secondary solidification *** secondary particles are the smallest and roundest when the isothermal holding time is 3 *** amount of the secondary particles gradually increases with the increase of isothermal holding temperature,and the eutectic reaction therefore is confined into small intergranular areas,contributing to the compactness of the final solidified eutectic structures.

关键词： aluminum alloy semisolid self-inoculation method secondary solidification primary particles eutectic structure

solidification Behavior and Rheo-diecasting Microstructure of A356 Aluminum Alloy Prepared by Self-inoculation Method

在线全文

学校读者我要写书评

暂无评论

Solidification Behavior and Rheo-diecasting Microstructure o...