检索结果-南通市图书馆

Improvement of titanium alloy TA19 fatigue life by submerged abrasive waterjet peening:Correlation of its process parameters with surface integrity and fatigue performance

引用

Chinese Journal of Aeronautics 2024年第1期37卷 377-390页

作者： Gongyu WANG Shulei YAO Yuxin CHI Chengcheng ZHANG Ning WANG Yalong CHEN Rongsheng LU Zhuang LI Xiancheng ZHANG Key Laboratory of Pressure Systems and Safety Ministry of EducationSchool of Mechanical and Power EngineeringEast China University of Science and TechnologyShanghai 200237China AECC Commercial Aircraft Engine Co.LTD Shanghai Engineering Research Center for Commercial Aircraft EngineShanghai 201108China

Submerged abrasive waterjet peening(SAWJP)is an effective anti-fatigue manufacturing technology that is widely used to strengthen aeroengine components.This study investigated the correlation of SAWJP process parameters on surface integrity and fatigue life of titanium alloy TA19.SAWJP with different water pressures and standoff distances(SoDs)was conducted on the TA19 specimens.The surface integrity of the specimens before and after SAWJP with different process parameters was experimentally studied,including microstructure,surface roughness,microhardness,and compressive residual stress(CRS).Finally,fatigue tests of the specimens before and after SAWJP treatment with different process parameters were carried out at room temperature.The results highlighted that the fatigue life of the TA19 specimen can be increased by 5.46,5.98,and 6.28 times under relatively optimal process parameters,which is mainly due to the improved surface integrity of the specimen after SAWJP treatment.However,the fatigue life of specimens treated with improper process parameters is decreased by 0.55 to 0.69 times owing to the terrible surface roughness caused by the material erosion.This work verifies that SAWJP can effectively improve the surface integrity and fatigue life of workpieces,and reveals the relationship between process parameters,surface integrity,and fatigue life,which provides support for the promotion of SAWJP in the manufacturing fields.

关键词： Fatigue testing process parameters Submerged abrasive waterjet peening Surface integrity Surface treatment Titanium alloy TA19

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of process parameters on the morphology of aluminum/copper alloy lap joints by red and blue hybrid laser welding

引用

China Welding 2024年第2期33卷 23-30页

作者：宋曜祥肖梦智黄德才张瑞华尹燕茹恩光吴怡霖 State Key Laboratory of Advanced processing and Recycling of Nonferrous Metals Lanzhou730050China China Iron&Steel Research Institute Group Beijing100081China Hardware Knife Cut Industrial Technology Research Institute Yangjiang Yangjiang529533China Guangdong Hall Laser Technology Co. Ltd.Foshan528251China

In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.

关键词： laser welding aluminum/copper alloy dual beam process parameters weld morphology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of process parameters and aging treatment on the microstructure and mechanical properties of Al Si8Mg3 alloy fabricated by selective laser melting

引用

International Journal of Minerals,Metallurgy and Materials 2022年第9期29卷 1770-1779页

作者： Yaoxiang Geng Hao Tang Junhua Xu Yu Hou Yuxin Wang Zhen He Zhijie Zhang Hongbo Ju Lihua Yu School of Materials Science and Engineering Jiangsu University of Science and TechnologyZhenjiang 212003China

Many studies have investigated the selective laser melting(SLM)of AlSi10Mg and AlSi7Mg alloys,but there are still lack of researches focused on Al-Si-Mg alloys specifically tailored for SLM.In this work,a novel high Mg-content AlSi8Mg3 alloy was specifically designed for SLM.The results showed that this new alloy exhibited excellent SLM processability with a lowest porosity of 0.07%.Massive lattice distortion led to a high Vickers hardness in samples fabricated at a high laser power due to the precipitation of Mg_(2)Si nanoparticles from theα-Al matrix induced by high-intensity intrinsic heat treatment during SLM.The maximum microhardness and compressive yield strength of the alloy reached HV(211±4)and(526±12)MPa,respectively.After aging treatment at 150℃,the maximum microhardness and compressive yield strength of the samples were further improved to HV(221±4)and(577±5)MPa,respectively.These values are higher than those of most known aluminum alloys fabricated by SLM.This paper provides a new idea for optimizing the mechanical properties of Al-Si-Mg alloys fabricated using SLM.

关键词： AlSi8Mg3 alloy selective laser melting process parameters microstructure aging treatment mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of process parameters on interfacial microstructure and mechanical properties of Al/Cu friction stir lap welding joints

引用

China Welding 2022年第4期31卷 48-58页

作者：王晨霁刘松朱浩曹志龙董少康 School of Materials Science and Engineering Shijiazhuang TIEDAO UniversityShijiazhuang 050043China Hebei Key Laboratory of Advanced Materials for Transportation Engineering and Environment Shijiazhuang 050043China

In this study,friction stir lap welding(FSLW)was performed for the welding test of 6061 aluminium alloy and T2 pure copper.The effect of process parameters containing rotation rate and travel speed on interfacial microstructure evolution and mechanical properties of Al/Cu dissimilar joints were explored.The experiments were carried out under the rotation rates of 600,900 and 1200 r/min and with the travel speeds of 30,70 and 100 mm/min.The characteristic of interface transition zones(ITZs)and the species of intermetallic compounds(IMCs)were investigated.The Al/Cu interface showed a layered structure composed of Al-Cu IMCs,which will affect the mechanical property.The layer consisting of Al2Cu was formed at lower heat input,and as heat input increased the Al4Cu9 phase started to form.Excessive heat input will increase the thickness of the interface and raise the brittleness of the joints.The thickness of the IMCs layers changed from0.89μm to 3.96μm as the heat input increased.The maximum value of tensile shear loading of 4.65 kN was obtained at the rotation rate of900 r/min and travel speed of 100 mm/min with the interface thickness of 2.89μm.The fracture mode of the joints was a mix of ductile and brittle fracture.

关键词： friction stir lap welding Al/Cu dissimilar welding intermetallic compounds process parameters mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analysis and Optimization of the Electrohydraulic Forming process of Sinusoidal Corrugation Tubes

引用

Fluid Dynamics & Materials processing 2024年第4期20卷 873-887页

作者： Da Cai Yinlong Song Hao Jiang Guangyao Li Junjia Cui State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle Hunan UniversityChangsha410082China

Aluminum alloy thin-walled structures are widely used in the automotive industry due to their advantages related to light weight and crashworthiness.They can be produced at room temperature by the electrohydraulic forming process.In the present study,the influence of the related parameters on the forming quality of a 6063 aluminum alloy sinusoidal corrugation tube has been assessed.In particular,the orthogonal experimental design(OED)and central composite design(CCD)methods have been used.Through the range analysis and variance analysis of the experimental data,the influence degree of wire diameter(WD)and discharge energy(DE)on the forming quality was determined.Multiple regression analysis was performed using the response surface methodology.A prediction model for the attaching-die state coefficient was established accordingly.The following optimal arrangement of parameters was obtained(WD=0.759 mm,DE=2.926 kJ).The attaching-die state coefficient reached the peak value of 0.001.Better optimized wire diameter and discharge energy for a better attaching-die state could be screened by CCD compared with OED.The response surface method in CCD was more suitable for the design and optimization of the considered process parameters.

关键词： Electrohydraulic forming aluminum alloy tube process parameters attaching-die state 1 Introduction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Automated process parameters tuning for an injection moulding machine with soft computing

引用

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2011年第3期12卷 201-206页

作者： Peng ZHAO Jian-zhong FU Hua-min ZHOU Shu-biao CUI State Key Laboratory of Fluid Power Transmission and Control Zhejiang University Hangzhou 310027 China State Key Laboratory of Material processing and Die & Mould Technology Huazhong University of Science and Technology Wuhan 430074 China

In injection moulding production,the tuning of the process parameters is a challenging job,which relies heavily on the experience of skilled operators.In this paper,taking into consideration operator assessment during moulding trials,a novel intelligent model for automated tuning of process parameters is proposed.This consists of case based reasoning (CBR),empirical model (EM),and fuzzy logic (FL) methods.CBR and EM are used to imitate recall and intuitive thoughts of skilled operators,respectively,while FL is adopted to simulate the skilled operator optimization thoughts.First,CBR is used to set up the initial process parameters.If CBR fails,EM is employed to calculate the initial parameters.Next,a moulding trial is performed using the initial parameters.Then FL is adopted to optimize these parameters and correct defects repeatedly until the moulded part is found to be satisfactory.Based on the above methodologies,intelligent software was developed and embedded in the controller of an injection moulding machine.Experimental results show that the intelligent software can be effectively used in practical production,and it greatly reduces the dependence on the experience of the operators.

关键词： Injection moulding machine (IMM) process parameters Case based reasoning (CBR) Empirical model (EM) Fuzzy logic (FL)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of process parameters on nonaqueous gelcasting for copper powder

引用

International Journal of Minerals,Metallurgy and Materials 2016年第5期23卷 542-547页

作者： Karima Bekouche Zhao-li Wang Cheng-Chang Jia Bo-wen Liu Yi Tang Institute of Advanced Materials and Technology University of Science and Technology Beijing

An approach to fabricate sintered copper with high green strength and high sintered density using nonaqueous gelcasting technol- ogy is presented in this study. The effects of various gelcasting processing parameters such as monomer content, monomer/crosslinker ratio, initiator content, dispersant dosage, and temperature on the flexural strength of dried green bodies and the relative density of sintered bodies were studied to obtain better microstructures and properties. The appropriate process parameters obtained for copper gelcasting are as follows monomer content, 20vol%-30vol% （based on the total volume of reagents）; monomer/crosslinker ratio, 10：1 to 20：1; initiator content, 3vol%-4vol% （based on the volume of the monomer）; dispersant dosage, 1.5wt%-2.5wt% （based on the mass of the copper powder）; and reaction temperature, 65-75℃.

关键词： copper powder gelcasting monomer process parameters flexural strength density

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of process parameters on Morphology and Grain Refinement Efficiency of TiAl_3 and TiB_2 in Alumimum Casting

引用

Journal of Materials Science & Technology 2008年第1期24卷 54-56页

作者： Prapas Kunnam Chaowalit Limmaneevichitr National Metal and Materials Technology Center Thailand Science Park Klong 1Klong LuangPathumthani12120 Thailand Production Engineering Department Faculty of Engineering King Mongkut's University of Technology ThonburiBangmodTungkhruBangkok10140 Thailand

This paper presents the effects of different process parameters in producing Al-STi-1B grain refiner,i.***.various sequences and reaction time,on grain refinement efficiency of aluminum castings.It was found that different process parameters resulted in different morphology and size distribution of TiAl-3 and TiB-2 in grain refiner. The experiment was carried out by adding KBF-4 and K-2TiF-6 to molten aluminum.The melting temperature was controlled at 800℃in an electric resistance furnace.Three different sequences of KBF-4 and K-2TiF-6 additions were applied,i.e.,adding KBF-4 before K-2TiF-6,adding K-2TiF-4 before KBF-4 and mixing both KBF-4 and K-2TiF-6 before adding to molten aluminum.Three different holding time at 1 min,30 min and 60 min were applied.The results showed that no significant difference of morphology and size distribution was found by varying three different sequences.Whereas,the different holding time provided major differences in both morphology and size distribution,which are technically expectable from diffusion and agglomeration between particles resulting in larger particle size and wider range of size distribution of TiAI3 and TiB2.If the reaction time was longer than 30 rain,morphology of both TiAl-3 and TiB-2 became too large.If the reaction time was too short,less reaction between TiAl-3 and TiB2 to form would be obtained.For grain refinement efficiency, it was found that mixing KBF-4 and K-2TiF-6 before adding to molten aluminum with a holding time of 30 min resulted in best grain refinement efficiency.

关键词： Grain refinement process parameters TiAl3 TiB2 K2TiF6 KBF4

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of pulsed laser process parameters on welding quality of automobile fuel injector

引用

China Welding 2011年第3期20卷 75-80页

作者：崔厚学胡伦骥余圣甫 School of Material Science and Engineering Huazhong University of Science and Technology Wuhan 430074

In this research, pulverization plate and base of a fuel injector in an automobile electronic-controlled engine was joined by pulsed laser welding. The different welding parameters were evaluated and effect of process parameters on joint characteristics was analyzed. The optimal process parameters were obtained as follows： welding current 120 A, welding speed 600 ram/rain, pulse duration 1.80 ms and pulse frequency 60 Hz. The microstructure of weld metal was investigated. Results show that the fusion zone is austenitic dendrite, the weld center is equiaxed grain, while the transition zone between fusion zone and weld center is mixed crystal with austenitic dendrite and equiaxed grain. The weld layered phenomenon was observed, and eddy caused by keyhole effect is the main reason for the formation of layered structure in molten pool.

关键词： fuel injector pulsed laser welding process parameters microstructure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of process parameters on weld quality by friction stir welding of 2219 aluminum alloy

引用

China Welding 2011年第2期20卷 12-16页

作者：杜岩峰田志杰高培涛张彦华 Beihang University Beijing 100083. Capital Aerospace Machinery Corporation Beijing 100076.

In the friction stir welding （FSW） process, welding speed and tool rotation speed are two important parameters, which have great effect on the weld quality. Because neither of each parameter can ensure the welding process effectively, an energy factor n, which is the ratio of rotation speed（to） to welding speed （v）, was selected to represent the heat generation intensity. According to this energy input factor n, the effect of heat input on the weld quality was estimated qualitatively. The results show that the optimized scope for the factor n should be within 2. 5 and 6. 0, outside of which groove defects and burr defects will appear.

关键词： friction stir welding process parameters weld formation tensile strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：