检索结果-南通市图书馆

Exploring the potential for improving material utilization efficiency to secure lithium supply for China's battery supply chain

引用

Fundamental Research 2024年第1期4卷 167-177页

作者： Xin Sun Han Hao Yong Geng Zongwei Liu Fuquan Zhao State Key Laboratory of Automotive Safety and Energy Tsinghua UniversityBeijing 100084China Belfer Center for Science and International Affairs Harvard UniversityCambridgeMA 02138United States Tsinghua-Rio Tinto Joint Research Center for Resources Energy and Sustainable Development Tsinghua UniversityBeijing 100084China School of International and Public Affairs Shanghai Jiao Tong UniversityShanghai 200240China

Lithium-ion battery(LIB)is the key technology for climate change mitigation.The sustainability of LIB supply chain has caused widespread concern since the material utilization efficiency of LIB supply chain has not been well investigated.This study aims to fill this research gap by conducting a dynamic material flow analysis of lithium in China from 2015 to 2021.Results indicate that within the temporal boundary,lithium flow and in-use stock grew significantly in China due to the rapid development of the EV market,with lithium flow in domestic production of basic chemicals increasing by 614%to 100 kt,end-use consumption increasing by 160%to 35 kt,and in-use stock increasing by 62%to 195 kt.China has been a net importer of lithium,of which cumulative imports and exports were 343 kt and 169 kt,respectively.In addition,103 kt of lithium was converted to inventories or was lost during the processing from 2015 to 2021.By optimizing inventory and processing,developing substitutes for lithium for non-battery applications,and improving lithium recycling,China's net import dependency of lithium could be reduced from 27%-86%to 0%-16%.Our study demonstrates that it is urgent to improve material utilization efficiency so that the lithium resource supply can be secured.

关键词： Lithium Lithium-ion battery Critical material Supply chain material flow analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enhancing wood efficiency through comprehensive wood flow analysis:Methodology and strategic insights

引用

Forest Ecosystems 2024年第2期11卷 172-183页

作者： Ruisheng Wang Peer Haller Institute of Steel and Timber Construction Technische Universität Dresden01062DresdenGermany

Wood,an essential natural resource in human civilization,remains widely used despite advances in technology and material substitution.The surge in greenhouse gas emissions and environmental concerns accentuates the need for optimizing wood utilization.material flow analysis is a powerful tool for tracking material flows and stocks,aiding resource management and environmental decision-making.However,the full extent of its methodological dimensions,particularly within the context of the wood supply chain,remains relatively unexplored.In this study,we delve into the existing literature on wood flow analysis,discussing its primary objectives,materials involved,temporal and spatial scales,data sources,units,and conversion factors.Additionally,data uncertainty,data reconciliation and crucial assumptions in material flow analysis are highlighted in this paper.Key findings reveal the significance of wood cascading and substitution effects by replacing non-wood materials,where they can reduce greenhouse gas emissions more than the natural carbon sink of forests and wood products.The immediate impact of short-term wood cascading might not be as robust as the substitution effect,with energy substitution showcasing better results than material substitution.However,it's crucial to note that these conclusions could experience significant reversal from a long-term and global perspective.Strategies for improving wood efficiency involve maximizing material use,advancing construction technologies,extending product lifespans,promoting cascade use,and optimizing energy recovery processes.The study underscores the need for standardized approaches in wood flow analysis and emphasizes the potential of wood efficiency strategies in addressing environmental challenges.

关键词： material flow analysis Wood Methodology Cascade use Substitution effects

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preliminary Research on Regional material flow analysis:A Case Study of Chengyang District in Qingdao

引用

Journal of Northeast Agricultural University(English Edition) 2008年第2期15卷 41-47页

作者： ZHOU Zhenfeng SUN Lei College of Resources and Environment Qingdao Agricultural University Qingdao 266109 Shandong China School of Environmental Science and Engineering Ocean University of China Qingdao 266003 Shandong China

The method ＂material flow analysis （MFA）＂ is one of the effective tools to study law and quantification of material flow between economic system and ecological system. On the national level, economy-wide material flow analysis has been published for a number of countries. However, published studies on the regional or local level are still very limited and a standardized method does not exist yet. On the basis of framework of material flow analysis proposed by Eurostat, the paper collected related data and analyzed material input and output for the Chengyang district in Qingdao. The results showed that DMI （Direct material Input） and TMR （Total material Requirement） in absolute number increased about 3.6 and 3.9 times, respectively from 1995 to 2004. Fossil fuel and mineral contributed to about 50.3%-76.3% of DMI. Imports of material increased about 5.0 times and became the most important Contributor to DMI, which showed that local economic growth was highly dependent on resources from other regions and countries. DPO （Domestic Processed Output） and TDO （Total Domestic Output） represent slow increasing trend, and DPO contributed to 22.2%-58.1% of TDO, suggesting local hidden flows were of obvious effect on TDO. The biggest component of DPO is CO2, approximately accounting for 90% of DPO. The material productivity increased 57.7% in last decade, reflecting improvement of efficiency of resources utilization in some extent. However, compared to developed countries and regions, material productivity of Chengyang district was relatively low. Therefore, in order to promote the sustainability, it is essential to develop circular economy and enhance materials productivity.

关键词： material flow analysis DMI TMR material productivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Spatiotemporal evolution and driving factors for GHG emissions of aluminum industry in China

引用

Frontiers in Energy 2023年第2期17卷 294-305页

作者： Chao TANG Yong GENG Xue RUI Guimei ZHAO School of Environmental Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China China Institute for Urban Governance School of International and Public AffairsShanghai Jiao Tong UniversityShanghai200030China SJTU-UNIDO Joint Institute of Inclusive and Sustainable Industrial Development School of International and Public AffairsShanghai Jiao Tong UniversityShanghai200030China School of Finance and Economics Jiangsu UniversityZhenjiang212013China

China’s aluminum(Al)production has released a huge amount of greenhouse gas(GHG)emissions.As one of the biggest country of primary Al production,China must mitigate its overall GHG emission from its Al industry so that the national carbon neutrality target can be achieved.Under such a background,the study described in this paper conducts a dynamic material flow analysis to reveal the spatiotemporal evolution features of Al flows in China from 2000 to 2020.Decomposition analysis is also performed to uncover the driving factors of GHG emission generated from the Al industry.The major findings include the fact that China’s primary Al production center has transferred to the western region;the primary Al smelting and carbon anode consumption are the most carbonintensive processes in the Al life cycle;the accumulative GHG emission from electricity accounts for 78.14% of the total GHG emission generated from the Al industry;China’s current Al recycling ratio is low although the corresponding GHG emission can be reduced by 93.73% if all the primary Al can be replaced by secondary Al;and the total GHG emission can be reduced by 88.58% if major primary Al manufacturing firms are transferred from Inner Mongolia to Yunnan.Based upon these findings and considering regional disparity,several policy implications are proposed,including promotion of secondary Al production,support of clean electricity penetration,and relocation of the Al industry.

关键词： aluminum material flow analysis GHG(greenhouse gas)emissions LMDI(logarithmic mean divisa index)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Life cycle assessment of urban uses of biochar and case study in Uppsala,Sweden

引用

Biochar 2022年第1期4卷 889-905页

作者： Elias S.Azzi Erik Karltun Cecilia Sundberg Department of Sustainable Development Environmental Engineeringand Sciences(SEED)KTH Royal Institute of TechnologyTeknikrigen 10B11428 StockholmSweden Department of Soil and Environment Swedish University of Agricultural Sciences(SLU)UppsalaSweden Department of Energy and Technology Swedish University of Agricultural Sciences(SLU)UppsalaSweden

Biochar is a material derived from biomass pyrolysis that is used in urban applications.The environmental impacts of new biochar products have however not been assessed.Here,the life cycle assessments of 5 biochar products(tree planting,green roofs,landscaping soil,charcrete,and biofilm carrier)were performed for 7 biochar supply-chains in 2 energy contexts.The biochar products were benchmarked against reference products and oxidative use of biochar for steel production.Biochar demand was then estimated,using dynamic material flow analysis,for a new city district in Uppsala,Sweden.In a decarbonised energy system and with high biochar stability,all biochar products showed better climate performance than the reference products,and most applications outperformed biomass use for decarbonising steel production.The climate benefits of using biochar ranged from−1.4 to−0.11 tonne CO_(2)-eq tonne−1 biochar in a decarbonised energy system.In other environmental impact categories,biochar products had either higher or lower impacts than the reference products,depending on biochar supply chain and material substituted,with trade-offs between sectors and impact categories.However,several use-phase effects of biochar were not included in the assessment due to knowledge limitations.In Uppsala’s new district,estimated biochar demand was around 1700 m^(3)year^(−1)during the 25 years of construction.By 2100,23%of this biochar accumulated in landfill,raising questions about end-of-life management of biochar-containing products.Overall,in a post-fossil economy,biochar can be a carbon dioxide removal technology with benefits,but biochar applications must be designed to maximise co-benefits.

关键词： Biochar Carbon dioxide removal Urban areas Bioeconomy Life cycle assessment material flow analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Occurrence of antibiotics in typical pig farming and its wastewater treatment in Thailand

引用

Emerging Contaminants 2022年第1期8卷 21-29页

作者： Rathborey Chan Chart Chiemchaisri Wilai Chiemchaisri Alongkot Boonsoongnern Phitsanu Tulayakul Department of Environmental Engineering Faculty of EngineeringKasetsart UniversityBangkok10900Thailand Department of Farm Resources and Production Medicine Faculty of Veterinary MedicineKasetsart UniversityNakhon Pathom73140Thailand Department of Veterinary Public Health Faculty of Veterinary MedicineKasetsart UniversityNakhon Pathom73140Thailand

This study investigated antibiotics in pig feed and drinking water and their excretion together with manure and wastewater at a typical pig farm in Thailand.Among the 21 antibiotics analyzed,tetracyclines,macrolides,b-lactams,aminoglycosides,quinolones,sulfonamides,pleuromutilin,and florfenicol classes,were found as active ingredients in feed and drinking water and excreted together with pig wastes.Among them,doxycycline,tilmicosin,and amoxicillin were detected higher concentrations in wastewater(12.9e459.1 mg L^(-1)),sediment(0.074e0.62 mg kg^(-1)),and pig manure(0.45e4.1 mg kg^(-1)).During wastewater treatment,those major antibiotics were remaining in pond water and settled sludge up to 79.5 mg L-1 and 24.2 mg kg^(-1),respectively.The normalized excretion mass of total antibiotics was determined as 11.2 mg head-1 day-1,contributed mainly from doxycycline(5.9 mg head-1 day-1),tilmicosin(2.8 mg head-1 day-1),and amoxicillin(2.2 mg head-1 day-1).Based on total pig production in Thailand,the excreted mass of antibiotics was estimated at 79.3 tons year-1.

关键词： Antibiotics material flow analysis Pig farming Pond treatment Thailand

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Win-Win:Anthropogenic circularity for metal criticality and carbon neutrality

引用

Frontiers of Environmental Science & Engineering 2023年第2期17卷 111-122页

作者： Xianlai Zeng State Key Joint Laboratory of Environment Simulation and Pollution Control School of EnvironmentTsinghua UniversityBeijing 100084China

Resource depletion and environmental degradation have fueled a burgeoning discipline of anthropogenic circularity since the 2010s.It generally consists of waste reuse,remanufacturing,recycling,and recovery.Circular economy and“zero-waste”cities are sweeping the globe in their current practices to address the world’s grand concerns linked to resources,the environment,and industry.Meanwhile,metal criticality and carbon neutrality,which have become increasingly popular in recent years,denote the material's feature and state,respectively.The goal of this article is to determine how circularity,criticality,and neutrality are related.Upscale anthropogenic circularity has the potential to expand the metal supply and,as a result,reduce metal criticality.China barely accomplished 15%of its potential emission reduction by recycling iron,copper,and aluminum.Anthropogenic circularity has a lot of room to achieve a win-win objective,which is to reduce metal criticality while also achieving carbon neutrality in a near closed-loop cycle.Major barriers or challenges for conducting anthropogenic circularity are deriving from the inadequacy of life-cycle insight governance and the emergence of anthropogenic circularity discipline.material flow analysis and life cycle assessment are the central methodologies to identify the hidden problems.Mineral processing and smelting,as well as end-of-life management,are indicated as critical priority areas for enhancing anthropogenic circularity.

关键词： Anthropogenic circularity material flow analysis Criticality Carbon neutrality Solid waste Circular economy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Dynamic phosphorus budget for lake-watershed ecosystems

引用

Journal of Environmental Sciences 2006年第3期18卷 596-603页

作者： LIU Yong GUO Huai-cheng WANG Li-jing DAI Yong-li ZHANG Xiu-min LI Zi-hai College of Environmental Sciences Peking University Beijing 100871 China Yunnan Institute of Environmental Science Kunming 650034 China

Lake eutrophication caused by excess phosphorus （P） loading from point sources （PS） and nonpoint sources （NPS） is a persistent and serious ecological problem in China. A phosphorus budget, based on material flow analysis（MFA） and system dynamic （SD）, is proposed and applied for the agriculture-dominated Qionghai Lake watershed located in southwestern China. The MFA-SD approach will not only cover the transporting process of P in the lake-watershed ecosystems, but also can deal with the changes of P budget due to the dynamics of watershed. P inflows include the fertilizer for agricultural croplands, soil losses, domestic sewage discharges, and the atmospheric disposition such as precipitation and dust sinking. Outflows are consisted of hydrologic export, water resources development, fishery and aquatic plants harvesting. The internal P recycling processes are also considered in this paper. From 1988 to 2015, the total P inflows for Lake Qionghai are in a rapid increase from 35.65 to 78.73 t/a, which results in the rising of P concentration in the lake. Among the total P load 2015, agricultural loss and domestic sewage account for 70.60% and 17.27% respectively, directly related to the rapid social-economic development and the swift urbanization. Future management programs designed to reduce P inputs must be put into practices in the coming years to ensure the ecosystem health in the watershed.

关键词： phosphorus budget lake-watershed ecosystems material flow analysis system dynamic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Clustering economic sectors in China on a life cycle basis to achieve environmental sustainability

引用

Frontiers of Environmental Science & Engineering 2013年第1期7卷 97-108页

作者： Sai LIANG Tianzhu ZHANG Xiaoping JIA School of Environment State Key Joint Laboratory of Environment Simulation and Pollution Control Tsinghua University Beijing 100084 China School of Environment and Safety Engineering Qingdao University of Science & Technology Qingdao 266042 China

To improve material efficiency, industrial structure optimization becomes a focal point in Chinese industrial and environmental policies. It is crucial to cluster economic sectors and determine their priority for industrial and environmental policy implementation. Integrating a set of criteria, a hybrid input-output model and the hierarchical cluster analysis, this study clusters China’s economic sectors and determines their priority on a life cycle basis. China’s economic sectors are clustered into three clusters. Industrial structure changes (industrial policy) should encourage the development of sectors in cluster 1 and limit the development of sectors in cluster 2. Technology development and materials recycling (two environmental policies) should mainly focus on sectors in clusters 1 and 2. Future industrial policies in China should limit the development of two sectors named and . Instead of limiting some industries by command-and-control, the best policy option is to remedy environmental standards and law enforcement. Enterprises belonging to the identified key sectors from the viewpoint of direct production impacts should be concerned to achieve enterprise sustainability. To achieve sustainable production chains, the identified key sectors from the viewpoint of accumulative production impacts should be concerned. For sustainable consumption, the identified key sectors from the viewpoint of consumption impacts should be concerned to transform consumption styles. Most of environmental pressure can be alleviated not only by technical improvements and material recycling, but also by the development of economic sectors in cluster 1.

关键词： cluster analysis input-output model life cycle material flow analysis sustainable development

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Estimation and prediction of plastic waste annual input into the sea from China

引用

Acta Oceanologica Sinica 2018年第11期37卷 26-39页

作者： BAI Mengyu ZHU Lixin AN Lihui PENG Guyu LI Daoji State Key Laboratory of Estuarine and Coastal Research East China Normal University State Environmental Protection Key Laboratory of Estuarine and Coastal Research Chinese Research Academy of Environmental Sciences

Marine plastic debris has been a pervasive issue since the last century, and research on its sources and fates plays a vital role in the establishment of mitigation measures. However, data on the quantity of plastic waste that enters the sea on a certain timescale remain largely unavailable in China. Here, we established a model using material flow analysis method based on life cycle assessment to follow plastic product from primary plastic to plastic waste with statistical data and monitoring data from accurate sources. This model can be used to estimate and forecast the annual input of plastic waste into the sea from China until 2020. In 2011, 0.547 3-0.751 5 million tons of plastic waste entered the seas in China, with a growth rate of 4.55% per year until 2017. And the amount will decrease to 0.257 1 to 0.353 1 million tons in 2020 under the influence of governmental management. The amount of plastic waste discharged from coastal areas calculated in this study was much larger than that from river, thus it is suggested to strengthen the governance and control of plastic waste in coastal fishery activities in China in order to reduce the amount of marine plastic waste input.

关键词： plastic waste prediction China marine material flow analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：