检索结果-南通市图书馆

Experimental Study on the Characteristics of liquid layer and Disturbance Waves in Horizontal Annular Flow

Journal of Thermal Science 1999年第4期8卷 235-242页

作者： Li Weidong Zhou Fangde Li Rongxian Zhou Lixing Department of Engineering Mechanics Tsinghua UniversityBeijing 100084China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

The mechanism for transporting liquid from the bottom of the pipe to the top still to be established in the prediction of the film thickness distribution in horizontal annular two-phase flow. To resolve this issue, using five parallel-wire conductance probes, time records of local liquid film thickness at five circumferential positions were collected. The characteristics of circumferential liquid film thickness profiles and its variation with gas and liquid velocities were obtained. The basic features of probability distribution function, probability density function, auto-correlation, cross-correlation and power spectrum density function of the disturbance waves in angular flow were studied respectively. The characteristics of circumferential profiles of disturbance waves and its variation with gas and liquid velocities were presented.

关键词： two-phase flow annular flow liquid layer disturbance wares.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of liquid layers on energy absorption during particle impact

引用

Particuology 2009年第4期7卷 245-259页

作者： Sergiy Antonyuk Stefan Heinrich Niels Deen Hans Kuipers Hamburg University of Technology Institute of Solids Process Engineering and Particle Technology Denickestr. 15 21071 Hamburg Germany University of Twente Fundamentals of Chemical Reaction Engineering Faculty of Science and Technology PO Box 217 Enschede 7500 AE The Netherlands

The influence of the thickness of a covering liquid layer and its viscosity as well as the impact velocity on energy loss during the normal impact on a flat steel wall of spherical granules with a liquid layer was studied. Free-fall experiments were performed to obtain the restitution coefficient of elastic-plastic γ- Al2O3 granules by impact on the liquid layer, using aqueous solutions of hydroxypropyl methylcellulose with different concentrations for variation of viscosity （1-300 mPa s）, In the presence of a liquid layer, increase of liquid viscosity decreases the restitution coefficient and the minimum thickness of the liquid layer at which the granule sticks to the wall. The measured restitution coefficients were compared with experiments performed without liquid layer. In contrast to the dry restitution coefficient, due to viscous losses at lower impact velocity, higher energy dissipation was obtained, A rational explanation for the effects obtained was given by results of numerically solved force and energy balances for a granule impact on a liquid layer on the wall. The model takes into account forces acting on the granule including viscous, surface tension, capillary, contact, drag, buoyancy and gravitational forces. Good agreement between simulations and experiments has been achieved.

关键词： Granule impact Restitution coefficient Energy dissipation liquid layer liquid bridge

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fabrication of curved micro structures on photoresist layer

引用

Transactions of Nonferrous Metals Society of China 2011年第A1期21卷 100-103页

作者： Jae Sung YOON Tae-Jin JE Doo-Sun CHOI Sung Hwan CHANG Kyung-Hyun WHANG Nano Mechanical Systems Research Division Korea Institute of Machinery and Materials (KIMM) Daejeon 305-343 Korea

A novel fabrication process for micro patterns with curvature was introduced. The curved structures were made by compensating rectangular micro structures with liquid photoresist layer. Because of the surface tension of the liquid in micro scale, various shapes of meniscus can he made on the micro channels. The micro channels were made on the silicon suhstrate in advance, and then the liquid layer was coated on the micro channels. From the nature of liquid behavior, the curved patterns with smooth surface are obtained, which cannot be made easily with the conventional mechanical machining, as well as with the microfabrication processes, such as wet and dry etching. With this principle, it is expected that the smooth and curved surfaces can be made by simple processes and the results can be applied widely, such as optical patterns.

关键词： micro pattern liquid layer MEMS micro channel silicon substrate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：