检索结果-南通市图书馆

A high performance 90 nm CMOS SAR ADC with hybrid architecture

在线全文

学校读者我要写书评

暂无评论

Journal of Semiconductors 2010年第1期31卷 51-57页

作者：佟星元陈剑鸣朱樟明杨银堂 Institute of Microelectronics Xidian University Corp DS Semiconductor Manufacturing International Corporation

A 10-bit 2.5 MS/s SAR A/D converter is presented. In the circuit design, an R-C hybrid architecture D/A converter, pseudo-differential comparison architecture and low power voltage level shiflers are utilized. Design challenges and considerations are also discussed. In the layout design, each unit resistor is sided by dummies for good matching performance, and the capacitors are routed with a common-central symmetry method to reduce the nonlinearity error. This proposed converter is implemented based on 90 nm CMOS logic process. With a 3.3 V analog supply and a 1.0 V digital supply, the differential and integral nonlinearity are measured to be less than 0.36 LSB and 0.69 LSB respectively. With an input frequency of 1.2 MHz at 2.5 MS/s sampling rate, the SFDR and ENOB are measured to be 72.86 dB and 9.43 bits respectively, and the power dissipation is measured to be 6.62 mW including the output drivers. This SAR A/D converter occupies an area of 238× 214 μm^2. The design results of this converter show that it is suitable for multi-supply embedded SoC applications.

关键词： analog-to-digital converter CMOS integrated circuits level shifters multi-supply SoC high performance

Control of vertical phase separation in high performance non-fullerene organic solar cell by introducing oscillating stratification preprocessing

在线全文

学校读者我要写书评

暂无评论

Nano Research 2021年第5期14卷 1319-1325页

作者： Dayong Zhang Pu Fan Jinyu Shi Yifan Zheng Jian Zhong Junsheng Yu State Key Laboratory of Electronic Thin Films and Integrated Devices School of Optoelectronic Science and EngineeringUniversity of Electronic Science and Technology of ChinaChengdu610054China Shanghai Institute of Optics and Fine Mechanics Chinese Academy of SciencesShanghai201800China

Non-fullerene organic solar cell(NFOSC)has attracted tremendous attention due to their great potential for commercial applications.To improve its power conversion efficiency(PCE),generally,sequential solution deposition(SSD)methods have been employed to construct the graded vertical phase separation(VPS)of the bulk-heterojunction(BHJ)active layer for efficient exciton separation and charge transition.However,a variety of orthogonal solvents used in the SSD may lead to the unpredicted change in the BHJ morphology and introduce additional defects inside the BHJ bulk thus complicate the fabrication process.Here,a simple oscillating stratification preprocessing(OSP)is developed to facilitate the formation of graded VPS among the BHJ layer.As a result,a significant improvement is obtained in PCE from 10.96%to 12.03%,which is the highest value reported among PBDB-T:ITIC based NFOSC.

关键词： oscillating stratification preprocessing graded vertical phase separation non-fullerene organic solar cells high performance sequential solution deposition

Low cost, high performance supercapacitor electrode using coconut wastes: eco-friendly approach

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2016年第5期25卷 880-887页

作者： Divyashree A. Shoriya Aruni Bt Abdul Manaf Yallappa S. Chaitra K. Kathyayini N. Gurumurthy Hegde BMS R and D Centre BMS College of Engineering Faculty of Industrial Sciences and Technology Universiti Malaysia Pahang Jain University Jain Global Campus Jakkasandra Post

Low cost, high performance supercapacitor electrodes were fabricated using coconut waste as precursor. Simple one step pyrolysis is adopted to get the spherical shaped particle where lignocellulosic nature of carbon converts into porous carbon nanospheres. Three types of coconut wastes, namely, coconut fiber(CF), coconut leaves(CL) and coconut stick(CS) have been studied and compared for their application in supercapacitors. Uniform spherical shape with particle size ranging from 30 to 60 nm for leaves and sticks and20 nm for fibers was obtained. The electrochemical properties of the porous carbon nanospheres were studied using cyclic voltammetry(CV), chronopotentiometry(CP) and electrochemical impedance spectroscopy(EIS). The porous carbon nanospheres derived from all the three biowaste samples show good electrochemical performance for supercapacitor application. Porous carbon nanospheres derived from coconut fiber exhibited maximum specific capacitance of 236 F/g followed by coconut stick and coconut leaves with 208 and 116 F/g respectively at a scan rate of 2 m V/s. Further impedance studies showed a charge transfer resistance of 4.9 for the porous carbon nanospheres derived from coconut fiber, while those from coconut leaves and coconut stick exhibited a slightly higher resistance of 6 and14.2, respectively. The simple eco-friendly approach we have demonstrated for synthesizing coconut waste based carbon nanospheres makes them excellent candidates for future, low-cost, energy storage devices.

关键词： Low cost Coconut waste Biowaste high performance Supercapacitor Energy storage

合理设计多电子转移机制实现更好的水系锌-有机电池

在线全文

学校读者我要写书评

暂无评论

Science China Materials 2024年第5期67卷 1367-1378页

作者： Kovan Khasraw Abdalla 王越洋 Kozhi Khasraw Abdalla 熊嘉伟李琦王斌孙晓明赵逸 State Key Laboratory of Chemical Resource Engineering Beijing University of Chemical TechnologyBeijing100029China Department of Biomedical Science Komar University of Science and TechnologySulaimaniyahIraq College of Education University of GeorgiaAthensGA30605USA Minmetals Exploration&Development CO. LTDBeijing100010China Advanced Technology Research Institute Beijing Institute of TechnologyJinan250300China

由于环境相容性好、分子结构可定制和有机物资源丰富等优势,水系锌-有机物电池(AZOBs)成为构建新一代大规模储能系统的关键技术.然而,电导率差、有机物溶解和单一活性基团等问题严重限制了有机物正极材料的倍率性能、稳定性和比容量.因... 详细信息

由于环境相容性好、分子结构可定制和有机物资源丰富等优势,水系锌-有机物电池(AZOBs)成为构建新一代大规模储能系统的关键技术.然而,电导率差、有机物溶解和单一活性基团等问题严重限制了有机物正极材料的倍率性能、稳定性和比容量.因此,具备多氧化还原中心和稳定骨架的有机物正极材料对于实现高性能有机物正极材料至关重要.这些多官能团有机物可协同作用并激发基于多电子转移的氧化还原反应,进而促进H^(+)/Zn^(2+)共嵌以显著提升电池性能.本文探索了多官能团有机物电极的分子结构与其氧化还原反应机理之间的构效关系.本文综述了多官能团有机正极材料在提高氧化还原电位、比容量、动力学以及稳定性等方面面临的挑战和解决策略,为进一步开发先进AZOBs的关键正极材料提供了重要基础.

关键词： aqueous zinc organic battery multifunctional organic cathodes energy storage mechanism molecular structure optimization high performance

high-mobility induced high-performance self-powered ultraviolet photodetector based on single ZnO microwire/PEDOT:PSS heterojunction via slight ga-doping

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2021年第34期93卷 33-40页

作者： Peng Wan Mingming Jiang Tong Xu Yang Liu Caixia Kan College of Science MIIT Key Laboratory of Aerospace Information Materials and PhysicsKey Laboratory for Intelligent Nano Materials and DevicesNanjing University of Aeronautics and AstronauticsNo.29 Jiangjun RoadNanjing 211106P.R.China

Semiconductor micro/nanostructures with broad bandgap can provide powerful candidates for fabricating ultraviolet photodetectors(PDs)due to their proper bandgap,unique optoelectronic properties,large surface-to-volume ratio and good integration.However,semiconducting micro/nanostructures suffer from low electron conductivity and abundant surface defects,which greatly limits their practical application in developing PDs.In this work,an ultraviolet PD consisting of single Ga-doped ZnO microwire(ZnO:Ga MW)and p-type poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)was designed.When exposed to ultraviolet illumination,the PD exhibits excellent performance(responsivity~185 m A/W,detectivity~2.4×10^(11) Jones,and fast response speed of~212μs for rise time and~387μs for decay time)under self-driven conditions.Compared with that of an undoped Zn O MWbased PD,the responsivity and detectivity of ZnO:Ga MW/PEDOT:PSS PD are significantly enhanced over 400%and 600%,respectively.Due to the incorporation of Ga element,the charge transport properties of a ZnO:Ga MW,specifically for the mobility,are effectively enhanced,which can substantially facilitate the generation,separation,transport and harvest efficiency of photo-generated carriers in the asfabricated PD.Besides,the Ga-incorporation improves the crystalline quality of MWs and reduces surface state density,further suggesting a high-quality ZnO:Ga MW/PEDOT:PSS heterojunction.This work provides a potential approach for designing high-performance self-powered ultraviolet PDs from the aspect of enhancing carrier transport through fine doping.

关键词： UV Photodetectors Self-powered Mobility high performance Microwire

A new method of preparing high-performance high-entropy alloys through high-gravity combustion synthesis

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2020年第10期27卷 1347-1352页

作者： Fu-kai Zheng Guan-nan Zhang Xiu-juan Chen Xiao Yang Zeng-chao Yang Yong Li Jiang-tao Li College of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050China College of Mechano-Electronic Engineering Lanzhou University of TechnologyLanzhou 730050China Key Laboratory of Cryogenics Technical Institute of Physics and ChemistryChinese Academy of SciencesBeijing 100190China

A new method of high-gravity combustion synthesis(HGCS)followed by post-treatment(PT)is reported for preparing high-performance high-entropy alloys(HEAs),Cr0.9FeNi2.5V0.2Al0.5 alloy,whereby cheap thermite powder is used as the raw material.In this process,the HEA melt and the ceramic melt are rapidly formed by a strong exothermic combustion synthesis reaction and completely separated under a high-gravity field.Then,the master alloy is obtained after cooling.Subsequently,the master alloy is sequentially subjected to conventional vacuum arc melting(VAM),homogenization treatment,cold rolling,and annealing treatment to realize a tensile strength,yield strength,and elongation of 1250 MPa,1075 MPa,and 2.9%,respectively.The present method is increasingly attractive due to its low cost of raw materials and the intermediate product obtained without high-temperature heating.Based on the calculation of phase separation kinetics in the high-temperature melt,it is expected that the final alloys with high performance can be prepared directly across master alloys with higher high-gravity coefficients.

关键词： high-entropy alloys high gravity combustion synthesis post-treatment low-cost high performance

A porous puckered V_(2)O_(5) polymorph as new high performance cathode material for aqueous rechargeable zinc batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2021年第10期30卷 459-468,I0012页

作者： Dauren Batyrbekuly Barbara Laïk Jean-Pierre Pereira-Ramos Zhumabay Bakenov Rita Baddour-Hadjean Institut de Chimie et des Matériaux Paris Est(ICMPE) UMR 7182 CNRS et UniversitéParis Est Créteil2 rue Henri Dunant94320 ThiaisFrance School of Engineering National Laboratory AstanaNazarbayev University53 Kabanbay Batyr AvenueAstana 010000Kazakhstan

Aqueous rechargeable zinc batteries are getting increasing attention for large-scale energy storage owing to their advantages in terms of cost,environmental friendliness and safety.Here,the layered puckeredγ’-V_(2)O_(5) polymorph with a porous morphology is firstly introduced as cathode for an aqueous zinc battery system in a binary Zn^(2+)/Li^(+)electrolyte.The Zn‖γ’-V_(2)O_(5) cell delivers high capacities of 240 and190 mAh g^(-1) at current densities of 29 and 147 mA g^(-1),respectively,and remarkable cycling stability in the 1.6 V-0.7 V voltage window(97%retention after 100 cycles at 0.15 A g^(-1)).The detailed structural evolution during first discharge-charge and subsequent cycling is investigated using X-ray diffraction and Raman spectroscopy.We demonstrate a reaction mechanism based on a selective Li insertion in the1.6 V-1.0 V voltage range.It involves a reversible exchange of 0.8 Li^(+)in γ’-V_(2)O_(5) and the same structural response as the one reported in lithiated organic electrolyte.However,in the extended 1.6 V-0.7 V voltage range,this work puts forward a concomitant and gradual phase transformation from γ’-V_(2)O_(5) to zinc pyrovanadate Zn_(3)V_(2)O_(7)(OH)2.2 H_(2)O(ZVO)during cycling.Such mechanism involving the in-situ formation of ZVO,known as an efficient Zn and Li intercalation material,explains the high electrochemical performance here reported for the Zn‖γ’-V_(2)O_(5) cell.This work highlights the peculiar layered-puckeredγ’-V_(2)O_(5) polymorph outperforms the conventionalα-V_(2)O_(5) with a huge improvement of capacity of 240 mAh g^(-1)vs 80 mAh g^(-1) in the same electrolyte and voltage window.

关键词： Vanadium pentoxide γ-V_(2)O_(5) Cathode Aqueous zinc battery high performance Layered structure Energy storage Renewable energy

Photonic crystal rod-based high-performance ultrafast fiber laser system

在线全文

学校读者我要写书评

暂无评论

high Power Laser Science and Engineering 2020年第4期8卷 84-90页

作者： Zhiguo Lv Zhi Yang Qianglong Li Feng Li Yishan Wang Wei Zhao Xiaojun Yang School of Physical Science and Technology Inner Mongolia Key Laboratory of Nanoscience and NanotechnologyInner Mongolia UniversityHohhot 010021China State Key Laboratory of Transient Optics and Photonics Xi’an Institute of Optics and Precision MechanicsChinese Academy of SciencesXi'an 710119China

In this paper,we innovatively conduct a Porro prism-based beam pointing stability promotion technique research and realize a high-performance rod-type photonic crystal fiber-based chirped pulse amplification(CPA)system,mainly including a frequency-reduced all-fiber pre-amplification stage,photonic crystal rod-based main amplification stage,and 1600 lines/mm transmission grating-pair compressor.Laser output with average power of 50 W,repetition rates of500 kHz,pulse energy of 100μJ,pulse duration of 830 fs,beam quality of M2high-performance laser system has an enormous application potential in fundamental research and precision manufacturing fields.

关键词： chirped pulse amplification ultrashort pulses high performance laser system

A Facile Synthetic Approach to Reduced Graphene Oxide-Fe_3O_4 Composite as high performance Anode for Lithium-ion Batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2014年第8期30卷 759-764页

作者： Yanhong Chang Jing Li Bin Wang Hui Luo Linjie Zhi School of Civil and Environmental Engineering University of Science and Technology Beijing Key Laboratory of Educational Ministry for high Efficient Mining and Safety in Metal Mine University of Science and Technology Beijing National Center for Nanoscience and Technology School of Chemical and Biological Engineering University of Science and Technology Beijing

Reduced graphene oxide-Fe3O4（rGO—Fe3O4） composite has been prepared via a facile and effective hydrothermal method by synthesizing Fe3O4 nanospheres on the planes of reduced graphene oxide（rGO）.Characterizations suggest the successful attachment of Fe3O4 nanospheres to rGO sheets.The rGO—Fe3O4composite（66.7 wt%of Fe3O4 in the composite） exhibits a stable capacity of 668 mAh g-1 without noticeable fading for up to 200 cycles in the voltage range of 0.001—3.0 V,and the superior performance of rGO-Fe3O4 is clearly established by comparison of the results with those from bare Fe3O4 nanospheres（capacity declined to 117 mAh g-1 only at the 200 th cycle）.The excellent electrochemical performance of rGO—Fe3O4 composite can be attributed to the fact that the uniform dispersion of the Fe3O4 nanospheres growing on the rGO sheets avoids aggregation during Li uptake-release cycling,which is desired for cycle stability.Meanwhile,the rGO sheets afford not only elastic buffer to alleviate the volume variations of Fe3O4nanospheres,but also good ionic and electronic transport medium in the electrode.

关键词： Facile synthetic approach rGO Fe3O4 nanosphcres Composite Lithium-ion batteries high performance