检索结果-南通市图书馆

Hot compressive deformation of eutectic Al-17at%Cu alloy on the interface of the Cu-Al composite plate produced by horizontal continuous casting

引用

International Journal of Minerals,Metallurgy and Materials 2022年第8期29卷 1578-1588页

作者： Jun Wang Fan Zhao Guoliang Xie Jiaxuan Xu Xinhua Liu Key Laboratory for Advanced Materials Processing(MOE) Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China

On the interface of the Cu-Al composite plate from horizontal continuous casting,the eutectic microstructure layer thickness ac-counts for more than 90%of the total interface thickness,and the deformation in rolling forming plays an important role in the quality of the composite plate.The eutectic microstructure material on the interface of the Cu-Al composite plate was prepared by changing the cooling rate of ingot solidification and the deformation in hot compression was investigated.The results show that when the deformation temperature is over 300℃,the softening effect of dynamic recrystallization ofα-Al is greater than the hardening effect,and uniform plastic deformation of eutectic microstructure is caused.The constitutive equation of flow stress in the eutectic microstructure layer was established by Arrhenius hy-perbolic-sine mathematics model,providing a reliable theoretical basis for the deformation of the Cu-Al composite plate.

关键词： horizontal continuous casting copper-aluminium composite plate composite interface eutectic microstructure material hot de-formation experiments constitutive equation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

HCWCI/Carbon Steel Bimetal Liner by Liquid-Liquid Compound Lost Foam Casting

引用

Journal of Iron and Steel Research(International) 2012年第10期19卷 13-19页

作者： XIAO Xiao-feng1,2, YE Sheng-ping2, YIN Wei-xin3, XUE Qiong4 (1. School of Mechanical Engineering and Automation, Wuhan Textile University, Wuhan 430073, Hubei, China 2. State Key Laboratory of Material Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, Hubei, China 3. Wuhan Zhike Abrasive-Resistant Material Science and Technology Development Co Ltd, Wuhan 430073, Hubei, China 4. College of Science, Wuhan University of Technology, Wuhan 430079, Hubei, China) School of Mechanical Engineering and Automation Wuhan Textile University Wuhan Hubei China State Key Laboratory of Material Processing and Die and Mould Technology Huazhong University of Science and Technology Wuhan Hubei China Wuhan Zhike Abrasive-Resistant Material Science and Technology Development Co Ltd Wuhan Hubei China College of Science Wuhan University of Technology Wuhan Hubei China

Impact, friction and corrosion from the grinding balls and the grinding medium during the mineral processing result in liner breakage. Liner, made from Hadfield steel or alloyed steel, could not have served in wet grinding environment for more than ten months. composite liner, made from HCWCI (high Cr white cast iron) and carbon steel, has been developed successfully with liquid-liquid composing process based on LFC (lost foam casting). The microstructure of composite was analyzed with optical microscope, SEM (scanning electron microscope)/EDX energy-dispersive X-ray and XRD (X-ray diffraction). According to micrograph, the combination region of two metals was staggered like dogtooth, no mixtures occurred between two liquid metals, and its interface presented excellent metallurgical bonding state. The results of mechanical property test show that, the hardness of HRC, the fracture toughness, and the bending strength are more than 61, 16.5 J/cm2 and 1 600 MPa, respectively. Comparison between liners made from bimetal composite and alloyed steel has also been investigated in industrial hematite ball mill. The results of eight months test in wet grinding environment prove that the service life of bimetal composite liner is three times as long as that of one made from alloyed steel.

关键词： composite liner bimetal liquid-liquid compound composite interface lost foam casting high Cr white cast iron

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

STABILITY　OF　WHISKERS　AND　INTERFACIAL　MICROSTRUCTURE　IN　ALUMINUM　MATRIX　compositeS　REINFORCED　BY　K_2O·8TiO_2　WHISKERS

引用

Acta Metallurgica Sinica(English Letters) 1995年第3期8卷 167-173页

作者： LI Jihong NING Xiaoguang YE Hengqiang (Laboratory of Atomic Imaging of Solids,Institute of Metal Research, Chinese Academy of Sciences, Shenyang) SHEN Baoluo LI Wei TU Mingjing (Chengdu University of Science and Technology, Chengdu, China) Inst of Metal Research Chinese Acad of Sciences Shenyang China

The stability of K_2O·8TiO_2 whiskers and the microstructures of the interfaces in K_2O·8TiO_2 whisker reinforced ZL109 aluminum composites under different heat treatment conditions were investigated by means of transmission electron microscopy(TEM) , mostly by high resolution TEM( HRTEM). It was found that K_2O·8TiO_2 whiskers were not very stable.The edge of the whiskers decomposed and a TiO interfacial layer formed during the process of fabricating K_2O·8TiO_2/ ZL109Al composite,and so the interior with increasing temperature and time of heatreatment. Two kinds of interfacial microstructures between the whiskers and the matrix were characterized; one was the TiO layer and the other was a nano scale amorphous transition layer. A few MgAl_2O_4 particles were also observed at the whisker/ matrix interfaces.

关键词： potassium titanate whisker,aluminium alloy composite interface heat treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：