检索结果-南通市图书馆

Influence of Zr and Mn additions on microstructure and properties of Mg-2.5wt%Cu-Xwt%Zn(X=2.5,5 and 6.5)alloys

International Journal of Minerals,Metallurgy and Materials 2022年第9期29卷 1733-1745页

作者： A.V.Koltygin V.E.Bazhenov I.V.Plisetskaya V.A.Bautin A.I.Bazlov N.Y.Tabachkova O.O.Voropaeva A.A.Komissarov V.D.Belov Foundry Department National University of Science and Technology(MISiS)Moscow 119049Russia Department of Metallurgy Steel New Production Technologies and Protection of MetalsNational University of Science and Technology(MISiS)Moscow 119049Russia Laboratory of Advanced Green Materials National University of Science and Technology(MISiS)Moscow 119049Russia Department of Materials Science of Semiconductors and Dielectrics National University of Science and Technology(MISiS)Moscow 119049Russia Fianit Laboratory(Laser Materials and Technology Research Center at GPI) Prokhorov General Physics Institute RASMoscow 119991Russia Laboratory of Hybrid Nanostructured Materials National University of Science and Technology(MISiS)Moscow 119049Russia Laboratory of Medical Bioresorption and Bioresistance Moscow State University of Medicine and DentistryMoscow 127473Russia

This work studied the effects of adding Zr and Mn in amounts less than 1wt%on the microstructure,mechanical properties,casting properties,and corrosion resistance of Mg-Zn-Cu alloys containing 2.5wt%Cu and 2.5wt%-6.5wt%*** hardness and electrical conductivity measurements were used to find an optimal heat treatment schedule with the best mechanical *** has been established that Zr significantly increases the yield strength of the alloys due to a strong grain refinement ***,the presence of Mn and Zr has a detrimental effect on alloy’s elongation at *** was shown that the precipitation of the Mg_(2)Cu cathodic phase in the alloy structure negatively affects the corrosion ***,the addition of Mn decreases the corrosion rate of the investigated *** best combination of the mechanical,casting,and corrosion properties were achieved in the alloys containing 2.5wt%Cu and 5wt%***,the Mn or Zr addition can improve the properties of the alloys;for example,the addition of Mn or Zr increases the fluidity of the alloys.

关键词： magnesium alloy Mg-Zn-Cu casting alloy Mn addition Zr addition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Role of Particles in Fatigue Crack Propagation of Aluminum Matrix Composites and casting Aluminum alloys

引用

Journal of Materials Science & Technology 2007年第2期23卷 213-216页

作者： Zhenzhong CHEN Ping HE Liqing CHEN Department of Aeronautical Engineering Shenyang Institute of Aeronautical Engineering Shenyang 110034 China The State Key Laboratory of Rolling and Automation Northeastern University Shenyang 110004 China

Fatigue crack propagation （FCP） behaviors were studied to understand the role of SiC particles in 10 wt pct SiCp/A2024 composites and Si particles in casting aluminum alloy A356. The results show that a few particles appeared on the fracture surfaces in SiCp/Al composites even at high △K region, which indicates that cracks propagated predominantly within the matrix avoiding SiC particles due to the high strength of the particles and the strong particle/matrix interface. In casting aluminum alloy, Si particle debonding was more *** with SiCp/Al composite, the casting aluminum alloy exhibited lower FCP rates, but had a slight steeper slope in the Paris region. Crack deflection and branching were found to be more remarkable in the casting aluminum alloy than that in the SiCp/Al composites, which may be contributed to higher FCP resistance in casting aluminum alloy.

关键词： Aluminum-matrix composites casting alloy Fatigue crack propagation Particle

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Physical,Mechanical,and Tribological Attributes of Stir-Cast AZ91/SiC_p Composite

引用

Acta Metallurgica Sinica(English Letters) 2014年第2期27卷 295-305页

作者： K.K.Ajith Kumar Abhilash Viswanath T.P.D.Rajan U.T.S.Pillai B.C.Pai Material Science and Technology Division CSIR-National Institute for Interdisciplinary Science and Technology

In the present investigation, composites with silicon carbide particle （SiCp） as reinforcement and AZ91 magnesium alloy as matrix have been synthesized using liquid metal stir-casting technique with optimized processing conditions. The composites with good particle distribution in the matrix, and better grain refinement and good interfacial bonding between the matrix and reinforcement have been obtained. The effect of SiCp content on the physical, mechanical, and tribological properties of Mg-based metal matrix composite （MMC） is studied with respect to particle distribution, grain refinement, and particle/matrix interfacial reactions. The electrical conductivity, coefficient of thermal expansion, microas well as macro-hardness, tensile and compressive properties, and the fracture behavior of the composites along with dry sliding wear of the composites have been evaluated and compared with the base alloy.

关键词： Composite AZ91D alloy casting alloy Mechanical properties Wear

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：