检索结果-南通市图书馆

design,hydrodynamic analysis,and testing of a bioinspired controllable wing mechanism with multi-locomotion modes for hybrid-driven underwater gliders

引用

Science China(Technological Sciences) 2021年第12期64卷 2688-2708页

作者： SUN TongShuai WANG YanHui YANG ShaoQiong WANG Cheng ZHANG LianHong Key Laboratory of Mechanism Theory and Equipment design of Ministry of Education Tianjin UniversityTianjin 300072China Qingdao Pilot National Laboratory for Marine Science and Technology(QNLM) Qingdao 266237China

Hybrid-driven technology,which can improve the sailing performance of underwater gliders(UGs),has been successfully used in ocean ***,a hybrid-driven UG(HUG)with an added tail propeller is still unable to achieve backward and turning motion with a body length radius,and the hydrodynamic pitch moment acting on the HUG that is mainly caused by the fixed-wing makes it difficult to achieve high-precision attitude control during fixed-depth *** solve this problem,a two-degree-of-freedom bioinspired controllable wing mechanism(CWM)is proposed to improve the maneuverability and cruising ability of *** CWM can realize five motion modes:modifying the dihedral angle or anhedral angle,changing the frontal area of the wing,switching the wing from horizontal to be a vertical rudder,flapping the wing as propulsion,and rotating the wing as a vector ***,the design process of the CWM is provided,and hydrodynamic forces in each motion mode of three CWMs with different trailing edge sweepback angles(TESA)and attitude angles are analyzed through computational fluid dynamics *** relationship between hydrodynamics and the attitude angles or TESA of the CWM is ***,experiments are conducted to measure the hydrodynamics of the CWM when it is in a flapping wing mode and rotating the wing as a vector propeller,*** hydrodynamic forces obtained from the simulation are consistent with data measured by a force sensor,proving the credibility of the simulated ***,by applying the results of the hydrodynamic force in this study,the flapping trajectory of the wingtip is planned using the cubic spline interpolation ***,two underwater demo vehicles with a pair of CWMs are developed,and experiments are conducted in a water tank,further validating and demonstrating the feasibility of the proposed CWM.

关键词： controllable wing mechanism hybrid-driven underwater glider bioinspired design multi-locomotion modes

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

bioinspired directional structures for inhibiting wetting on super-melt-philic surfaces above 1200°C

引用

International Journal of Extreme Manufacturing 2024年第4期6卷 337-346页

作者： Hujun Wang Xiuyuan Zhao Zhengcan Xie Biao Yang Jing Zheng Kai Yin Zhongrong Zhou Tribology Research Institute State Key Laboratory of Rail Transit Vehicle SystemSchool of Mechanical EngineeringSouthwest Jiaotong UniversityChengdu 610031People's Republic of China Hunan Key Laboratory of Nanophotonics and Devices School of PhysicsCentral South UniversityChangsha 410083People's Republic of China

Over the past two decades,superhydrophobic surfaces that are easily created have aroused considerable attention for their superior performances in various applications at room ***,there is a growing demand in special fields for the development of surfaces that can resist wetting by high-temperature molten droplets(>1200°C)using facile design and fabrication ***,bioinspired directional structures(BDSs)were prepared on Y2O3-stabilized ZrO2(YSZ)surfaces using femtosecond laser *** from the anisotropic energy barriers,the BDSs featured with no additional modifiers showed a remarkable increase from 9.2°to 60°in the contact angle of CaO–MgO–Al2O3–SiO2(CMAS)melt and a 70.1%reduction in the spreading area of CMAS at 1250°C,compared with polished super-CMAS-melt-philic YSZ ***,the BDSs demonstrated exceptional wetting inhibition even at 1400°C,with an increase from 3.3°to 31.3°in contact angle and a 67.9%decrease in spreading *** work provides valuable insight and a facile preparation strategy for effectively inhibiting the wetting of molten droplets on super-melt-philic surfaces at extremely high temperatures.

关键词： directional structures bioinspired design inhibiting wetting super-melt-philic superhydrophobic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analysis of Bio-inspired Fishbone Based Corrugated Rib for Adaptive Camber Morphing

引用

Journal of Bionic Engineering 2023年第3期20卷 1083-1102页

作者： R.Jini Raj J.Bruce Ralphin Rose A.Vasudevan Department of Mechanical Engineering Anna University Regional CampusTirunelveli627007India Saveetha School of Engineering SIMATSChennai600124India

bioinspired active camber morphing is an innovative solution for the aerodynamic performance enhancement of flight vehicles such as Micro Aerial Vehicles(MAVs)and Unmanned Aerial Vehicles(UAVs).In the present article,a bio-inspired Fish Bone Active Camber(FishBAC)corrugated rib design concept with and without a spine for an Unmanned Aerial Vehicle(UAV)is *** wing model is composed of multiple corrugated ribs and a splitted spar for connecting each *** rib geometry is subjected to static structural analysis using ANSYS Finite Element Analysis(FEA)module under the unit load *** deformation modes are first extracted from the solution of the wind tunnel test and the elastically deformed NACA 4412 profile will be used to perform Fluid-Structure Interaction(FSI)studies as a partly coupled *** corrugated rib with spine design is a stable structure as inspired from nature species that can withstand elastic and inertial *** fluid dynamics(CFD)simulation is performed to compute the coefficient of lift(Cl),coefficient of drag(Cd)at different Angle of Attack(AoA)for a modified NACA 4412 airfoil and the pressure loads acting on the deformed shape is *** Cl obtained for the modified airfoil at lower AoA is about 60–80%higher and the maximum Cl(Clmax)is 62%higher than the baseline *** Cd of modified airfoil is reduced about 20%at the AoAα=3°as compared with the baseline *** proposed corrugated rib structure has been successfully 3D printed with Polylactic Acid plus(PLA+)material and the wind tunnel testing is done to validate the Cl,Cd values obtained through CFD simulations and the results are presented.

关键词： bioinspired design Active morphing Fish bone Wind tunnel CFD

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Performance enhancement of futuristic airplanes by nature inspired biomimetic fish scale arrays--A design approach

引用

Biomimetic Intelligence & Robotics 2022年第2期2卷 32-47页

作者： Ganesh Natarajan S Bruce Ralphin Rose J Department of Mechanical Engineering Anna University Regional Campus TirunelveliTamilnaduIndia

Biomimetics has an immense potential to drive the next generation of technologies forward by propounding competent solutions from *** decades,the nonsmooth topography of most living creatures has been critical to their existence and *** to human-made smooth surfaces,when adapted for fluid flow applications,nonsmooth surfaces can enhance the overall aerodynamic performance by reducing the drag ***,the bioinspired scale structure of fish has been identified as a key biomimetic derivative for improving the aerodynamic efficiency in various cross-domain *** study investigates the aerodynamics of a fish scale array(FSA)NACA 0021 model at a specific Reynolds number(Re)of approximately 2.46×105 that is meant for laminar flow conditions using Computational Fluid Dynamics(CFD)tools and a subsonic wind tunnel facility.A 3D printed biomimetic FSA film is developed and affixed on the NACA 0021 wing profile for the experimental investigation,followed by flow visualization through the smoke tunnel *** proved qualitatively under specific aerodynamic conditions,the creation of velocity streaks has a major role in the drag reduction *** obtain a clear perspective of flow across the overlapping fish scale structures,the results are focused on the central and overlapping regions of the FSA *** experiment has proved the existence of a combined formation of low and high velocity streaks in central and overlapping *** FSA 0021 model showed a maximum drag reduction of 9.57%,which was attributed to the streak formation phenomenon observed in the overlapping FSA configuration.

关键词： Biomimetics Aerodynamics Fish scale arrays Drag reduction bioinspired design

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mechanical properties of crosslinks controls failure mechanism of hierarchical intermediate filament networks

引用

Theoretical & Applied Mechanics Letters 2012年第1期2卷 27-31页

作者： Zhao Qin Markus J. Buehler Laboratory for Atomistic and Molecular Mechanics （LAMM） Department of Civil and Environmental Engineering Massachusetts Institute of Technology 77 Massachusetts Ave. Room 1-235 A＆B Cambridge MA 02139 USA Center for Computational Engineering Massachusetts Institute of Technology 77 Massachusetts Ave. Cambridge MA 02139 USA Center for Materials Science and Engineering Massachusetts Institute of Technology 77 Massachusetts Ave. Cambridge MA 02139 USA

Intermediate filaments are one of the key components of the cytoskeleton in eukaryotic cells, and their mechanical properties are found to be equally important for physiological function and disease. While the mechanical properties of single full length filaments have been studied, how the mechanical properties of crosslinks affect the mechanical property of the intermediate filament network is not well understood. This paper applies a mesoscopic model of the intermediate network with varied crosslink strengths to investigate its failure mechanism under the extreme mechanical loading. It finds that relatively weaker crosslinks lead to a more flaw tolerant intermediate filament network that is also 23% stronger than the one with strong crosslinks. These findings suggest that the mechanical properties of interfacial components are critical for bioinspired designs which provide intriguing mechanical properties.

关键词： failure mechanism flow tolerance intermediate filament protein network soft material,rupture crosslink strength bioinspired design

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multifunctional flexible optical waveguide sensor: on the bioinspiration for ultrasensitive sensors development

引用

Opto-Electronic Advances 2022年第10期5卷 1-11页

作者： Arnaldo Leal-Junior Leticia Avellar Vitorino Biazi M.Simone Soares Anselmo Frizera Carlos Marques Graduate Program in Electrical Engineering Federal University of Espírito Santo(UFES)Fernando Ferrari AvenueVitória 29075-910Brazil Mechanical Engineering Department Federal University of Espírito Santo(UFES)Fernando Ferrari AvenueVitória 29075-910Brazil I3N&Physics Department University of AveiroAveiro 3810-193Portugal

This paper presents the development of a bioinspired multifunctional flexible optical sensor(BioMFOS)as an ultrasensitive tool for force(intensity and location)and orientation *** sensor structure is bioinspired in orb webs,which are multifunctional devices for prey capturing and vibration *** multifunctional feature of the structure is achieved by using transparent resins that present both mechanical and optical properties for structural integrity and strain/deflection transmission as well as the optical signal transmission properties with core/cladding configuration of a *** this case,photocurable and polydimethylsiloxane(PDMS)resins are used for the core and cladding,*** optical transmission,tensile tests,and dynamic mechanical analysis are performed in the resins and show the possibility of light transmission at the visible wavelength range in conjunction with high flexibility and a dynamic range up to 150 Hz,suitable for wearable *** BioMFOS has small dimensions(around 2 cm)and lightweight(0.8 g),making it suitable for wearable application and clothing *** tests are performed in the structure by means of applying forces at different locations of the *** results show an ultra-high sensitivity and resolution,where forces in theμN range can be detected and the location of the applied force can also be detected with a sub-millimeter spatial ***,the BioMFOS is tested on the orientation detection in 3D plane,where a correlation coefficient higher than 0.9 is obtained when compared with a gold-standard inertial measurement unit(IMU).Furthermore,the device also shows its capabilities on the movement analysis and classification in two protocols:finger position detection(with the BioMFOS positioned on the top of the hand)and trunk orientation assessment(with the sensor integrated on the clothing).In both cases,the sensor is able of classifying the movement,especially wh

关键词： optical sensors optical waveguides bioinspired design multifunctional structures wearable sensors

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Boosting Mechanical Properties of Polymer Materials by building Nacre-like Hierarchy Micro-sheet Structure in Bulk Polymer

Boosting Mechanical Properties of Polymer Materials by build...

引用

2009年全国高分子学术论文报告会

作者： Günter Reiter Stephen S.D.Cheng Department of physics The University of FreiburgGermany

＜正＞Can we mimic,for example,the bio-sheeted structure in nacre to design and fabricate synthetic polymer materials?Although much progress in fabricating micro-sheet structures of organic-inorganic thin films have been achieved in recent years,it has proven to be great challenge to transcribe nacre-like sheeted architectural designs into synthetic bulk *** major

关键词： bioinspired design nacre-like microsheet hierachiray structure

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：